Cisco Connect - Add another Printer.
I need to download cisco connect.I have the disk but it tells me I am already set-up and should use cisco connect to add another printer.I do not have cisco connrct on my computer,
Mod Note:Title edited and Post moved to start a new thread.
Welcome to the Cisco Home Community.
You can go here to download Cisco Connect. Type your router model, click on the download tab and choose your router version. Cisco Connect will be available from there. Do post updates if this does not resolve your issue.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router
Similar Messages
-
How do I add another printer to my MacBook pro 13 inch?
I am having trouble figuring out how to add a HP printer to my laptop? Any sugestions?
Tell us what you've tried and where you are having trouble. Tell us the printer model. Do you have the latest drivers? How are you connected to the printer? Lots of questions... You say add another printer. Please clarify.
-
Hello everyone, How do i add another printer to my HP Solution Center?
I have an HP 6500 that comes up on the solution center. I also have an HP C8180 hooked up to my computer and would like to scan etc from the HP Solution center, how do I get the 2 printers to figure on the Solution Center?
Tell us what you've tried and where you are having trouble. Tell us the printer model. Do you have the latest drivers? How are you connected to the printer? Lots of questions... You say add another printer. Please clarify.
-
How do I add another printer to my laptop?
How do I add another printer to my laptop? I used to go to "add printer" and it would automatically find the printer I was near and I could add it. It doesn't allow me that anymore
Open Accounts preferences (Users & Groups if you are running Lion.) Click on the lock icon and enter your admin password. Click on the Add [-] button to create a new account. Configure the account with username and password as well as set they type of account - admin, standard, or managed.
-
How do I add a printer connected to another iMac on the network to my printer list?
How do I add an Epson printer connected to an iMac on the network to the printer list on my MacBook Pro? I cannot get it to show up in the list for printers to add.
That only works if the printer is itself a network printer. You can't do it if it is directly connected to another computer on the network unless it is configured to be a Shared Printer on the other computer.
-
I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?
I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem. -
Can you print from an iPad 2 using 3G in a home with no other computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area and is wanting a printer to use occasionally. He doesn't want to deal with a computer and I keep his iPad updated for him at my home. Please shed some light on this for us PLEASE. Thanks
In that case, it should be possible. I haven't tried this directly, but I believe it should work.
You'll need to get an actual AirPrint compatible Printer.
Check here for a list of Printers you can choose from.
http://support.apple.com/kb/ht4356
Once you have the compatible printer, using the Hotspot feature from the iPhone he'll have to create the Wifi bubble form the iPhone, and connect the Printer to that Wifi network.
Then connect the iPad to that same Wifi network provided by the iPhone. When all that is done, the printer should appear in any of the Apps that can Print under the Action Arrow button.
For instance in email, pressing the action arrow should show a Print option. In there the printer should appear.
Alternatively you can simply buy a wireless router and setup the network through there even if there is no internet attached. Connect the wireless printer to the router network, and connect the iPad or iPhone to that same wifi network to print. -
I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active. Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue.
This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps. -
I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!
I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!
-
I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
Thanks,
IvetteYou would need to get the IP address of your printer then manually add a network print queue.
To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address. -
Can I add a second wired / wireless router in my home by connecting to another FiOS coax outlet?
Can I add a second router in my home by connecting to another FiOS coax outlet?
My existing, Verizon supplied, router is connected to a cable coax outlet on one side of the house and works fine. With all the new A/V equipment coming out these days, I'd like to be able to network them. So what I'd lke to do is put a splitter before my FiOS HD DVR receiver and connect another router right there for my TV, BLU Ray, Receiver, XBOX, etc.
Any tips, comments, or suggestions appreciated.
Solved!
Go to Solution.Don't want to do that ... while the refrigerator talking to the dryer has had the interesting side effect of automatically tossing my salads, my washer now insists on feeding my clothes to the ice maker which makes for either shredded or frozen clothes depending on the setting. I can only imagine what would have happened if they networked my coffee maker and toaster as well!
-
How to add another Planning Server to the Shared Connections?
Hi,
This is for version 11.1.2.1.103
Currently all of our users use Planning in Prod environment. I would like to open the UAT environment to a smaller set of users. UAT environment is in our Test environment. I couldn't figure it how to add the UAT environment to the current Prod Shared Connections. I was hoping it would be as easy as right click on the Prod Planning Server > click on Add > Add the UAT server > Click OK.
Instead I had to follow couple of steps to add the UAT environment to the SV:
1. SmartView > Options > Advanced > Edit Shared Connections URL with UAT environment URL > Click OK
2. Connect to Shared Connections > Planning
3. Right click on the Plan Type > Click on Add to Private Connections
4. Follow the same steps for the PROD Plan Type.
Now, I do have two environments under Private Connections and I do not need to follow the first step every time I want to switch between environments.
Was it a overkill or I did it right?
Thanks,
Mehmet
p.s. I just noticed that in Shared Connections, you can add another Essbase Server, but that's not an option for Planning.
Edited by: Mehmet Sevinc on May 8, 2012 2:48 PMHi Again,
following up my previous comment on this, you can create a macro and assign to an event or macro in the excel to change shared connection URL.
Declare Function HypSetSharedConnectionsURL Lib "HsAddin" (ByVal vtAPSURL As Variant) As Long
Sub SubHypSetSharedConnectionsURLTest()
Dim lRet As Long
lRet = HypSetSharedConnectionsURL("http://UATserver:19000/workspace/SmartViewProviders")
End Sub
http://docs.oracle.com/cd/E17236_01/epm.1112/sv_user/ch17s01s08s10.html
Hope this helps,
Ahmet -
Hello,
I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
had happend. PLEASE HELP
sincerely,
Laura.I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers. -
Can't see USB printer option in Cisco Connect
Just fired up an e4200 router and was realy easy and everything working great HOWEVER I can a Canon MP490 printer that I have connected to the router via USB and Cisco Connect is only showing Wireless Printers as a connection option!!
I am on a MAC using OS X 10.7, have Cisco Connect Version 1.4 (12005.2) and the firmware updated today.
Any ideas?The Windows version has an option for "Printers" that leads to options for a wireless printer and a USB printer after Cisco Connect Installation where as in Mac you will get the only option for wireless. Since, Cisco Connect does not have an added feature of providing USB printing with the MAC OX.
-
How to add our own applications to Cisco Connect Cloud?
How to add our own applications to Cisco Connect Cloud?
You might find this interesting.
http://newsroom.cisco.com/press-release-content?type=webcontent&articleId=926074
Interested developers are invited to visit the Linksys Developer Community at http://developer.cisco.com/web/ldc to register and develop apps for Linksys Smart Wi-Fi Routers. Cisco empowers developers with technical, marketing, and sales resources to help support every phase of their developmental and business cycles.
Maybe you are looking for
-
Which way to enforce policy for endpoint from gateway router instead of switch
Dear team, I am proposing ISE to customer. They want to deploy ISE as central authentication and policy point for users in branches. I would like to ask if this scenario is possible or not: - When user client is plugged into access switch, the switch
-
Logic Pro 9.0.0 can't open GarageBand 6.0.4 files
As the title reads "Logic Pro 9.0.0 can't open GarageBand 6.0.4 files" - any ideas? Logic just says files were created by a newer Logic pro version, they were created with GrarageBand not logic so I don't know.
-
Hp 6510 prints fine from laptop but only prints blank pages from ipad
Printer prints fine from my laptop but will only spit out blank pages from my ipad. It used to print fine from the ipad.
-
Basic Crystal Report Help- collapsing groups
I am using Crystal for the first time as part of my company's trial period of the software. I created a very basic report, but am having difficulty figuring out to collapse my groups. I have a group with 3 major categories. I want the first report
-
How do I delete old podcasts that I downloaded directly to my iPod Touch?
I cannot delete old podcasts that I downloaded directly to my iPod Touch through its Wifi connection. Manually deleting them in iTunes doesn't work--my laptop doesn't recognize that they are on my iPod. What should I do? I want my memory back!