Cisco IPS (global correlation) is downloading lots of updates from the iron-port website
I have query on Global correlation.
Following is the observed behavior
Scenario 1:
Global Correlation Inspection: ON (Standard)
Reputation Filter: ON
Result: Global correlation downloads in bytes or KBs (observed on proxy)
Scenario 2:
Global Correlation Inspection: OFF
Reputation Filter: ON
Result: Global correlation downloads 4-5 MB every 5 Minutes (observed on proxy)
This behavior has been observed on both IPS devices one by one. What we wanted the clarity on is why is does global correlation download so much of data when it is OFF, and downloads only minimal data when ON. The equation does not seem to be right.
Request you for your prompt response.
Regards,
Neal
Both global correlation and reputation filtering retrieve updates from the SensorBase network, or IronPort. By default, they communicate with the network every five minutes. This value cannot be changed by the IPS administrator.
Similar Messages
-
Hi,
While enabling Global correlation, I understood that we need to configure proxy or DNS.
Also, I hope that needs to open the port (80/443) on the firewall for the management IP address of IPSto reach the cisco sensor database. If i'm correct what about the destination IP, do we need to enable "any" or specific IP is there.
ACL:
Source (IPS Management IP) -> Port (80/443) -> Destination?Hi,
Global correlation features only contain external IP addresses, so if you position a sensor in an
internal lab, you may never receive global correlation information.
Source (IPS Management IP) -> Port (80/443) -Detination is https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
Regards
Rajeswar -
I can't download a PDF map from the usgs.gov website. Please help.
Using the map locator feature on the usgs website my iPad won't download PDF maps. Any assistance would be appreciated. Thanks.
Could you provide a link? It will take a while for us to trawl around the whole site trying to guess which particular page you are referring to...
-
IPad is trying to download a friends updates from the App Store
I have an IPad which a friend has somehow linked to his IPhone updates.Now my IPad tells me there are updates to install from the Apps store and when I go into them it askes for his Apple ID password. Ho wdo I get rid of this!
The only way that I can imagine this occurring is if his iPhone had been synced to your computer at some point in time and he used his Apple ID and account to purchase his apps. Do you have his iPhone apps on your iPad? I think they would have to be there somewhere if the app store is telling you updates are available.
If that is the case you will have to delete the apps from your iTunes library on your computer and sync your iPad after you remove the apps. Launch iTunes, go to the library on the left side, click on Apps, then right click (control click in Windows?) on the app you want to delete and select delete. Then connect your iPad to your computer and sync. The iPad can only sync the content that is in the iTunes library so if the apps are gone, they will in effect be erased from your iPad when you sync again and this should resolve the problem. -
Cannot download Final Cut Pro from the app store
Hello,
I cannot download Final Cut Pro from the app store.
I says "Failed to download" and error has occurred
What is wrong?
is it my Macbook?I had a problem way back in the olden days, i.e., FCPX 10.0.2, and finally gave up and called the Apple Store using a land-line phone.
Anyway, (this was a couple years ago), if I remember right, they passed me off to someone in the FCPX group and I got the App. However, this was not a really goo way to go because for many updates afterward, everytime I wanted to update I had to go thorugh the same ritual.
Finally, probably around 10.0.8, things got "fixed" and since then I've been able to go direct and download it from the App Store without having to make a phone call.
My suggestion would be to try calling the App Store. Maybe, if there is a "global problem" and they get a lot of calls, they will fix it.
Heck, maybe write a Knowlede Base (KB) article about it.
Disclaimer: I didn't check to see if there was one. -
How do I overcome the Failed Downloads for Instant Movies from the Adobe Server?
I have a Windows 8.1 PC , Premiere Elements ver. 12, and I have a dedicated DSL for computer only. In my best efforts, even when disabling McAfee completely, I have had almost 4 days of frustration trying to download an Instant Movie from the online content server. At times the DL works, slowly, then it pauses, sometimes the DL reverses the count and I lose 10mb and it resumes (I have never seen that before). Most frustrating is when the DL is nearly complete and the message pops up that I need to check my connection as the download has failed. I have 1.6TB disc space, and no restrictions in place at my end. I tried from 2 of the PCs, both Win 8.1. I have tried at all hours of the day for traffic on the server, but that doesn't seem to matter. I have attempted the Secret Agent file DL at best 10x. Is there a setting I need to change to receive this content, or go to a different site where I can directly access this content?
I have purchased Three PE 12 programs for 3 replacement PCs and I need some real direction.
Thank you, JerryJerry W B
There will be those that report Content download of a few minutes. Although we are happy for them, many have found that this is not usually the case. Download of the Premiere Elements 11 and 12 Content download is often a slow process which demands a lot of patience whether the download be "Download Now" or "Download All". Just two of the factors in this situation are the Internet Speed/Status and the status of the Adobe Server. Many times it is time of the day.
http://www.atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html
http://atr935.blogspot.com/2013/12/pe12-content-download-considerations.html
I have DSL Service on the east coast of the USA. It is now about 6 pm Saturday February 22, 2014.
I right clicked the blue ban at the top right corner of the Instant Movie thumbnail for the Secret Agent theme. I selected Download Now to download just that one Instant Movie theme.
a. The file size was given as 75.8 MB, not 118.7 MB. It took 11 minutes and 19 seconds to download that Instant Movie.
I checked the download on two different computers, one Windows 7 64 bit and the other Windows 8.1 64 bit. The Instant Movie Secret Agent had a file size of 75.8 MB according to the download pop up in the opened project.
b. If you are talking days for this download, then I would first check with your Internet provider. There is no other place for these downloads except from within the program. And, when you do get them, I would encourage you to save them as per my blog posts on this topic to avoid having to go through an labored downloading processes again.
Do you find the downloading of Content to be the same for all the other categories requiring this type of download, not just Instant Movies?
Please review and update us on your progress.
Thank you.
ATR
Add On...Although you did say that you disabled McAfee, be advised that McAfee's recent update(s) have created some serious problems for Premiere Elements. So, I would re-evaluate McAfee's possible role in all this along with the firewalls settings. -
I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.
Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
*To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
*The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
*I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
Much Respect
Lammo -
Why does it take so long to download a saved movie from the cloud
Why does it take so long to download a saved movie from the cloud
Hi first off if your running fcp 7 with compressor 3.5 and fcp x and compressor 4 on the same drive you may run into problems
as you now have a mix up between Qmasters which caused me lots of problems when i did any back ground Rendering via compressor of FCP-X
i had to completly remove compressor 3.5 and compressor 4 then put compressor 4 back on again as the shared rendering out of FCP-X seems to loose the plot with both versions on the same on the same drive there is an app
Here
http://www.digitalrebellion.com/fcsremover/
which you can get allows you to get rid of certain bits of FCS and FCP-X correctly as you may know deleting the app is,nt the whole story as you need to remove the pref etc as well
but its really clearing out every thing to do with qmaster thats is the thing here thats what causes all the issues
really you should follow apple install instructions for FCP -X install ( and put it on separate volumes ) and i know they say there is a way to get every thing working on the same drive ...but it did,nt work for me like you i had massive render times and that 3x crash error
any way
once i had remove done my remove C3.5 ,C4 and reinstall C4 only it worked straight away from FCP-X using all the cores on my machine
get some thing like istats or run activity monitor to make sure Fcp-x is using all your cores to render and you can actually see if its doing anything at all instead of waiting 5 hours for an error
if you want to use multi core in compressor 4 you have to go into the new apple qmaster tab and setup up a quick cluster etc
On another note i alway use Optimized media when doing the import as while you editing its back ground render every thing into pro res making it a much nice codec to compress down to H264 which you need for the ATV
i hope that helps a bit ,some else may have a better solution but worked for me
thanks
G -
I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?
The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC -
Whenever I updated or downloaded a new app from the App Store, a message appears saying:
"Account Not In This Store
Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
"This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
Can anyone help me please?
ArianAre you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
If you keep encountering problems contact iTunes support. They will help you sort it out. -
I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?
I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you. -
How to download a pdf file from the server from an strut application?
Hi,
I wan to download a pdf file from the server side to local system. Please help me how i use the down load option.Read up on the Struts download action [1].
And next time, please post in the relevant forum, one of the web-tier ones [2].
[1] http://wiki.apache.org/struts/StrutsFileDownload
[2] http://forum.java.sun.com/category.jspa?categoryID=20
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
---------------------------------------------------------------- -
I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/ -
I can no longer receive or send email via my Yahoo account from my iphone6. I've downloaded several "help guides" from the internet, deleted and re-added the account via imap settings. Nothing seems to work. Any ideas?
Use the yahoo app if available?
-
I have downloaded all my music from the cloud to my new iPhone and created playlists so I can listen to it when not it wifi like when on a plane. If I turn on iTunes Match will I still have this music still downloaded? The online information suggests all my music will be replaced. Will I have to download it again??
What you have on your computer is your iTunes library, not an iTunes "account." The account that is related to iTunes is your Apple ID, which you use to sign in to the iTunes Store and make purchases. It is also used with iCloud. iPods (that are not iPod touch) are associated with your iTunes library, not to your Apple ID.
So, I think you probably just need to set up (or update) automatic syncing for the iPod. If it's not set up to sync those new songs, iTunes still syncs the iPod, but it syncs nothing
In iTunes, if the sidebar (along left side of iTunes window) is hidden, from the menu bar, under View, select Show Sidebar. In the sidebar, the iPod appears under DEVICES, when it is connected.
Select the iPod in iTunes. There is a row of buttons, starting with Summary. Click on Music next to Summary. This is the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music (if it's not already checked). If your iTunes music library fits completely on the iPod, you can choose to sync Entire music library. Otherwise, you can choose to sync Selected playlists, artists, albums, and genres. On the lists below, checkmark the playlists, artists, albums, and/or genres that you want on the iPod. When you click Apply, the songs from your selection sync to the iPod.
One convenient way to set this up (if you can't sync the entire iTunes music library) is to create a new playlist in your iTunes library. Name it "iPod Songs" (or whatever you want). Put ALL songs that you want on the iPod on this playlist, including those new songs. Back on the iPod's Music screen in iTunes, select this playlist under Playlists. Going forward, to update songs on the iPod, just update that playlist in your iTunes library (add/remove songs). The next time you connect the iPod (or click the Sync button), iTunes automatically syncs the same changes to the iPod.
Maybe you are looking for
-
Error in running a simple JSF app developed in Jdeveloper over weblogic
I have a developed a simple JSF application using Jdeveloper 11g. To this application i have added a webservice proxy which generates the proxy client which communicates with the peoplesoft webservice. when i run the standalone proxy class, it is abl
-
Hi Frndz, what is the t. code to see material where used report? I want to see usage of matls in BOM,Routings, Pro.orders and also it's qty. in stock at a glance. Thanks in advance, Rohit.
-
How B.I accelerator differs from Crystal Reports
Hi B.I's, I like to know which (B.I accelerator or Crystal Reports ) has better perfomance and fastest query response time
-
Hey guys, My setup: - Macbook Pro 15" / iMac 27" - Both on Mac OSX 10.7 Lion - VMWare Fusion - Windows 7 in bootcamp - *dives away* - AND running thru VMWare So far, so good. Now what I would like to do is set up a third partition to be able to clone
-
Permanently disabling Modification Assistant
Hi everybody. Is there a way I can permanently disable the Modification Assistant for every custom development object I ever modify ? The Modification Assistant is extremely annoying and the project has other means of dealing with change management.