CISCO-LWAPP-CONTROLLER

Hello,
I am trying to get this officeextend working.
I connected the ap and checked the H-Reap box and then officeextend and gave it a public ip. This public ip is NAT'd to the dmz controller on the firewall. (The dmz controller is 5508 running code 6.0.199.4)
I have connected this officeextend 1132 ap to a broadband connection and this gets an ip of 192.168.1.23 on its fa0 interface. all good till now.
when i console onto the officeextend 1132 AP, i get an error msg could not resolve Cisco-LWAPP-Controller.abc.uk....domain server (192.168.1.254) and Cisco-CAPWAP-Controller.home.uk...think it needs DNS set to the public ip on the local asdl box, is it ?
if this is the case, I am not sure if i can do this as this is controlled by the ISP

I have added this now scott on the management interface but still cant get the AP to join the controller. This AP is connected to a broadband wireless router connected back to a ADSL router that has the DNS settings
(also i cant see any traffic hitting on ports 5246 and 5247 on the firewall. so think this AP is not trying to go out )
it comes up with
CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Translating "CISCO-CAPWAP-CONTROLLER.Abc.uk"...domain server (192.168.1.254)
*Apr  8 16:25:39.983: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
Translating "CISCO-LWAPP-CONTROLLER.Abc"...domain server (192.168.1.254)
*Apr  8 16:25:42.095: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.Abc.uk
config on AP
service password-encryption
hostname AP6400.f14d.b6ba
logging rate-limit console 9
enable secret 5 $1$ACEH$BuOIS/RYEP5ZXvWxbyCFS/
aaa new-model
aaa authentication login default local
aaa authentication login reap_eap_methods group radius
aaa session-id common
eap profile lwapp_eap_profile
method fast
crypto pki trustpoint Cisco_IOS_MIC_cert
revocation-check none
rsakeypair Cisco_IOS_MIC_Keys
crypto pki trustpoint cisco-root-cert
revocation-check none
rsakeypair Cisco_IOS_MIC_Keys
crypto pki trustpoint airespace-device-root-cert
revocation-check none
rsakeypair Cisco_IOS_MIC_Keys
crypto pki trustpoint airespace-new-root-cert
revocation-check none
rsakeypair Cisco_IOS_MIC_Keys
crypto pki trustpoint airespace-old-root-cert
revocation-check none
rsakeypair Cisco_IOS_MIC_Keys
username Cisco secret 5 $1$2zkE$CaKkr5zDUWwltKRFvrIto0
ip ssh version 2
interface Dot11Radio0
no ip route-cache
mbssid
speed  basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
power client local
packet retries 64 drop-packet
interface Dot11Radio0.2
encapsulation dot1Q 2 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip route-cache
mbssid
power client local
packet retries 64 drop-packet
interface Dot11Radio1.2
encapsulation dot1Q 2 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
ip address dhcp client-id FastEthernet0
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
no ip http server
logging trap errors
logging origin-id string AP:6400.f14d.b6ba
logging facility kern
logging snmp-trap notifications
logging snmp-trap informational
logging snmp-trap debugging
logging 255.255.255.255
radius-server local
  no authentication eapfast
  no authentication leap
  no authentication mac
  nas 66.11.22.33 key 7 111D110C041B18030A2632253C363832
  group hreap
control-plane
line con 0
line vty 0 4
transport input none
line vty 5 15
transport input none
end

Similar Messages

  • Could not resolve CISCO-LWAPP-CONTROLLER

    Hi..
    I have AP Cisco Aironet 1250.  I want upgrade to LWAPP. AP using static IP address. When AP try to joinm error message displayed "DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER".
    Loading file /c1250...
    extracting info (292 bytes)
    Image info:
        Version Suffix: k9w8-.124-10b.JDD
        Image Name: c1250-k9w8-mx.124-10b.JDD
        Version Directory: c1250-k9w8-mx.124-10b.JDD
        Ios Image Size: 4352512
        Total Image Size: 4352512
        Image Feature: WIRELESS LAN|LWAPP
        Image Family: C1250
        Wireless Switch Management Version: 4.2.207.0
    Extracting files...
    c1250-k9w8-mx.124-10b.JDD/ (directory) 0 (bytes)
    extracting c1250-k9w8-mx.124-10b.JDD/c1250-k9w8-mx.124-10b.JDD (3956889 bytes)
    %LWAPP-5-!CHANGED: LWAPP changed state to JOIN
    %LWAPP-5-CHANGED: LWAPP changed state to IMAGE
    Error messages:
    *Jun 30 09:46:16.491: %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER
    *Jun 30 09:46:16.491: %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER
    *Jun 30 09:46:16.491: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
    *Jun 30 09:46:16.651: %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER
    *Jun 30 09:46:16.651: %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER
    *Jun 30 09:46:16.651: Logging LWAPP message to 255.255.255.255.
    Any help?
    Thanks.

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin-top:0cm;
    mso-para-margin-right:0cm;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0cm;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin-top:0cm;
    mso-para-margin-right:0cm;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0cm;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    You configuration is not correct. You can remove the line ‘domain-name CISCO-LWAPP-CONTROLLER.mydomain.com’ or replace it with ‘domain-name mydomain.com’ and configure the DNS server with both "CISCO-LWAPP-CONTROLLER.mydomain.com" and "CISCO-CAPWAP-CONTROLLER.mydomain.com" pointing to 172.16.00.25.
    I suggest that you remove this line and forget about DNS and go for DHCP option 60 and 43 as you already have configured. You do not need both the DNS configuration and DHCP option 43.
    Since you have configured ‘option 60 ascii "Cisco AP c1250"’ and ‘option 43 hex f104ac100019’ then your 1250s should try to associate with the controller 172.16.00.25.
    Please post more of the syslog and look for events regarding DHCP option 43.
    Is the address 172.16.00.25 for the WLC correct?
    Regards,
    André

  • Which WLC interface should be resolved from cisco-lwapp-controller.domain

    Hi,
    we use several 4402 wlc and want the aps connect to connect to them via dns discovery.
    It would be fine if somebody could tell me to which ip address (in our dns database) I have to add an alias for cisco-lwapp-controller.<domain>.
    Is it the management interface, the ap manager interface or one/all dynamic interface(s)?
    Is there any hint concerning this in the documentation?
    Best Regards,
    Thorsten

    You use the management interface of the WLC.
    Here is a good link also if you have issues:
    http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml#backinfo

  • LWAPP cannot translate cisco-lwapp-controller

    Hi all:
    I had add a hostname to DNS server as CISCO-LWAPP-CONTROLLER . and i use my controller as a internal DHCP server , it will assign ip to a lot of vlan. My lightweigh ap cannot translate the cisco-lwapp-controller and other a record at DNS server .

    Can you translate that on the local lan? Verify that the manamgement and ap-manager is configured for vlan "0" untagged and that the trunk port is setup with the native vlan of the WLC management and ap-manager interface. If you console in the ap and power cycle the ap, what does the log show. Post the log so we can take a look at it.

  • VLAN assignment without ACS on Cisco Wireless Controller 5508

    I was wondering if it is possible to do dynamic VLAN assignment on the Cisco Wireless Controller 5508 without using Cisco ACS but use Microsoft NPS server instead?  Is there a manual or article that someone can point me in the right direction?
    Thank you!

    Any RADIUS server will allow you to do the dynamic vlan assignment if you configure the right RADIUS attributes (64, 65 and 81 that Steve mentioned above).
    This doc shows example of dynamic vlan assignment with WLC and ACS.
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml
    Same config on WLC is needed. However, on the RADIUS you need to configure the same attributes on the NPS instead.
    HTH
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Cisco CAPWAP controller ????

    Hi,
    Really sorry if this isn't the right place but am desperate for help!
    Have applied for a dream job for me to get into networking but one of the things that they have asked for that I haven't heard of before is a Cisco CAPWAP controller, is anyone able to explain the basics or it for me?
    From quick web search it seems to be a type of wireless access point!
    Any info would be useful.
    Thanks
    Sent from Cisco Technical Support iPad App

    CAPWAP
    The controller-based solution allows the splitting of 802.11 functions between the controller-based AP, which handles real-time
    portions of the standard, and the Cisco WLC, which handles items that are not time sensitive. This model is called split MAC .
    The AP handles the portions that have real-time requirements, such as the following:
    ■ Beacons management
    ■ 802.11 encryption and decryption
    ■ Frame buffering for dozing stations
    ■ Probe responses
    ■ Air monitoring for interferences and rogues
    The controller handles all other functionalities, such as the following:
    ■ 802.11 authentication and association
    ■ QoS and security management
    ■ Mobility (roaming) management
    ■ RF management
    ■ Bridging to and from the DS in the right VLAN
    Lightweight APs (LAP) communicate with the controller using a specific protocol, Control and Provisioning of Wireless Access
    Points (CAPWAP). The LAP encapsulates all 802.11 data frames received from a client into a CAPWAP frame. The data frame
    portion is simply encapsulated into a CAPWAP frame, and is not encrypted by default (data part encryption is possible but optional).
    The LAPs also constantly exchange encrypted CAPWAP control messages with the controller via the Radio Resource Management
    (RRM) engine for real-time RF management, including
    ■ Radio resource monitoring
    ■ Dynamic channel assignment
    ■ Interference detection and avoidance
    ■ Dynamic transmit power control
    ■ Coverage hole detection
    This come from a book wrote by Jerome Henry

  • Cisco 5760 controller in centralized mode supports 4404 controller as anchor controller?

    Hello All,
    I have a cisco 5760 controller running in centralized mode. I want to configure one 4404 controller as anchor controller to work with the 5760 controller. Is this supported?.
    Thanks in advance
    Shabeeb

    No, It is not supported.
    You cannot have a mobility peer with 5760 unless you enable "new mobility" on its peer . In CUWN products this is supported in 5508/WiSM2/8510 on specific codes. In current supported codes it has to be 7.6.x or 8.x.
    As you know 4400 only supported upto 7.0.x code. So new mobility is not supported, hence you cannot peer with CA products.
    In case if you have a "new mobility" supported WLC, here how you configure it
    http://mrncciew.com/2014/05/06/configuring-new-mobility/
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Cisco 5508 controller

    I have Cisco 5508 controller in our high school. I changed the password for one of our WLANs yesterday.(WLANs>WLANs>WLAN in question (in my case OBSD-Internal)>Security>Layer 2. For some reason it reverted back to the previous password ( this was confirmed by a client attempting to connect). What could possibly cause this?                  

    Hi Sean,
    May be you did not saved the config on WLC(After changing the password).
    Regards

  • Cisco 526 controller and AP541N

    Hello,
    I have a cisco 526 controller. Since this device is EOL. Can I still use 526 controller with AP541N? What are the limitations and problem configuring with
    AP541N?
    Thanks.
    Dipendra

    Hi Dipendra,
    The 541N is NOT supported via the 526 Controller
    With the Cisco AP 541N, you can:
    • Easily set up, configure, and manage multiple wireless access points, without the need to invest in a wireless controller
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10492/data_sheet_c78-566239.html
    Cheers!
    Rob

  • Cisco wireless controller 4400

    Hey all,
    I was wondering does the Cisco Wireless controller 4400 come with any management software such as the Cisco Wireless Controller system software?
    regards,
    Mark

    WCS doesn't come with your WLC purchase you can down load a trial version of WCS from Cisco site. I think it is a 15 or 30 day trial.
    You would have to purchase a license to run a full blown WCS. You can get this in either Linux or Windows.
    Hope this helps you.
    You can find info on this at:
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646_ps3915_Products_Data_Sheet.html

  • Cisco Outdoor Controller Based Access Point

    Hi,
    I am looking for Cisco Outdoor Controller Based access point model. The WLC is Cisco 2500 Series.
    I have checked couple of outdoor models but all are mesh access point. I am looking for  normal controller based outdoor access point ( just like controller based indoor access point models )
    Thanks.

    adding to Leo...
    Cisco Aironet 1300 Series
    http://www.cisco.com/en/US/products/ps5861/index.html
    Cisco Aironet 1550 Series
    http://www.cisco.com/en/US/products/ps11451/index.html
    Cisco Aironet 1520 Series
    http://www.cisco.com/en/US/products/ps8368/index.html
    these all are Cisco OUTdoor APs.
    Now u can choose as per ur req.
    Regards
    Dont forget to rate helpful posts

  • Cisco 5508 Controller 5GHz band selection

    hi,
    today i installed one Cisco 5508 Controller with 1262 APs only with 5GHz antennas. all radios are came up excpet 5ghz band, i tried all my level of best to get it UP. can anybody tell me if there is anything we need to really inspect to enable 5 GHz band.
    Anvar

    hi Nocolas,
    please find below answers, and attached snapshot
    1) what is your AP exact model ? -A ? -E ?
    Ans:-    AP Model No  - AIR-LAP1262N-A-K9
    2) What country did you configure your WLC for ?
    Ans:-    Saudi Arabia
    3) did you enable 802.11a network on the "wireless" tab ?
    Ans:-  Yes
    4) if you go to the AP radio list on the WLC, what does it say for your AP ? up ? down ?
    Ans:-  802.11a/n Radios      DOWN
              802.11 b/g/n Radios  UP
    Thanks,
    Anvar

  • Cisco LWAPP 2602e can't join the controller

    i have a problem with a 2602e access point that he wouldn't join the controller (wlc 8510)
    i gave him the image --> p3g2-k9w8-tar.152-2.JB.tar
    we have a lot of capwap ap's but ive never had this problem before
    *Jul 19 07:53:59.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.45.29.101:5246
    *Jul 19 07:54:00.059: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Jul 19 07:54:00.067: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Jul 19 07:54:00.095: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:54:01.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jul 19 07:54:01.099: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jul 19 07:54:01.107: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jul 19 07:54:02.127: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:54:03.127: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jul 19 07:54:10.095: %CAPWAP-3-ERRORLOG: Selected MWAR 'WLC041D1M120101'(index 0).
    *Jul 19 07:54:10.095: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Jul 19 07:54:10.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.45.29.101 peer_port: 5246
    *Jul 19 07:54:10.003: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jul 19 07:54:10.187: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jul 19 07:54:10.199: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.45.29.101 peer_port: 5246
    *Jul 19 07:54:10.199: %CAPWAP-5-SENDJOIN: sending Join Request to 10.45.29.101
    *Jul 19 07:54:10.199: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Jul 19 07:54:10.199: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Jul 19 07:54:11.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jul 19 07:54:11.031: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:54:11.039: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jul 19 07:54:11.047: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jul 19 07:54:12.067: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:54:13.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jul 19 07:54:15.199: %CAPWAP-5-SENDJOIN: sending Join Request to 10.45.29.101
    *Jul 19 07:54:15.203: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jul 19 07:54:15.211: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jul 19 07:54:16.203: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jul 19 07:54:16.231: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:54:17.231: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jul 19 07:55:00.155: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
    *Jul 19 07:55:00.155: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
    *Jul 19 07:55:00.155: %MESH-6-LINK_UPDOWN: Mesh station 4c4e.3563.a6bc link Down
    *Jul 19 07:55:02.155: %LINK-6-UPDOWN: Interface BVI1, changed state to down
    *Jul 19 07:55:07.655: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
    *Jul 19 07:55:09.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.45.29.101:5246
    *Jul 19 07:55:13.071: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Jul 19 07:55:13.087: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:55:14.071: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jul 19 07:55:14.111: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jul 19 07:55:14.119: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jul 19 07:55:15.139: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:55:16.139: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jul 19 07:55:23.091: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jul 19 07:55:23.099: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jul 19 07:55:24.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jul 19 07:55:24.119: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:55:25.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jul 19 07:55:33.091: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jul 19 07:55:33.099: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jul 19 07:55:34.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jul 19 07:55:34.119: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jul 19 07:55:35.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jul 19 07:55:40.539: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
    *Jul 19 07:55:42.539: %LINK-6-UPDOWN: Interface BVI1, changed state to up
    *Jul 19 07:55:43.087: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
    *Jul 19 07:55:43.087: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 29, state 4
    *Jul 19 07:55:43.087: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
    *Jul 19 07:55:43.087: %CAPWAP-3-ERRORLOG: Failed to process timer message.
    *Jul 19 07:55:43.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Jul 19 07:55:45.607: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Jul 19 07:55:46.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

    One is mesh the other is non mesh. So changing the code or setting up the ap as mesh would fix your issue. Either could of been the wrong ap purchased or the wrong image placed on the ap. the thing now is that you have to put the ap in local mode and delete the mesh files in flash. This will prevent the ap from still thinking its mesh.
    Sent from Cisco Technical Support iPhone App

  • Intel and Cisco LWAPP - Sucess at last

    I work for a large healthcare system that has a very large LWAPP deployment. We utilize the network for laptops, 7920 IP phones, and the new 7921 phones. We have HP laptops with Intel wireless cards. We have both the HP 6120 and 6320 laptops with the Intel 2915 and 3945 Intel wireless abg clients. There has always been a beacon interoperability problem between these intel clients and lwapp. This has been a huge issue that neither Intel nor Cisco has wanted to deal with.
    The problem has finally been resolved with LWAPP code release 4.1.185.0. I upgraded my 4404-100 controllers to 4.1.185.0 to fix some possible arp issues I was seeing on our new Cisco 7921 phones. Not only did it resolve the arp problem, all my Intel problems went away.
    It was interesting because I did the upgrade the night before I had HP and Intel engineers onsite to troubleshoot the interoperability issues - we were giving them one more chance to resolve the issue before we were probably going to switch to a different laptop and wireless card that had a proven record for working with LWAPP - like Thinkpad with atheros.
    When the engineers arrived, the problem could not be reproduced - constant drops off the network and wild roaming (we have a very dense AP deployment (1232 & 1242 APs).
    We recretaed the problem by downgrading a controller to 4.1.171.
    I am extermely happy that we finally found a code to support the laptops and is also still compatabile with our 7921 phones. We have about 200 7921 phones we are deploying on 802.11a. We plan on keeping the data on b/g.
    I am posting this just in case other people have similar issues.

    We upgraded the WLC to 4.1.185 and we changed the power settings on the Intel card from the default to MAX.
    Do a right click on your PC--->Properties---Hardware--->Device Manager--->Intel Wireless--->Properties--->Power Management.
    Here is the straight talk from the Intel site:
    If the wireless access point (AP) or broadband wireless router does not properly support the PSP feature, intermittent loss of wireless connection, inability to initiate a wireless connection, or poor wireless connection data performance could result. The symptoms may be more pronounced when on battery power.
    Cause:
    In a mobile environment, power save polling mode is a feature for extended battery life for mobile stations. The capability requires coordination between the AP/router and the laptop's wireless adapter for proper operations. Intel has discovered the feature may not be implemented correctly or completely in some wireless access points or wireless gateway devices.
    Solution:
    Contact the AP/router vendor for updated software or firmware that corrects the problem.
    As a temporary workaround, manually set the wireless adapter to CAM (continually aware mode), which disables the PSP capability. To do this, in either Intel? PROSet/Wireless Software or the Network Control Panel Applet (NCPA), in the power management section, uncheck the DEFAULT / AUTO selection and set the slider for HIGHEST / MAXIMUM PERFORMANCE.
    Notes:
    To ensure the adapter is set to CAM - if the slider is already at the HIGHEST / MAXIMUM PERFORMANCE setting, move the slider to another setting and then back to HIGHEST / MAXIMUM PERFORMANCE.
    Hope this helps.

  • Wireless Network is slow after putting cisco wireless controller

    Hello Guys,
    My wireless network was very good before putting Cisco WLC 4402 with version 3.2.171.6.
    In my network there are two SSID's one for official and another for guest, which is working one single LAP 1142.( Total 12 LWAP is here)   
    we decided to manage all the ap and deployed WLC but now wireless network is very slow, local gateways is pinging with 80 ms. before WLC it was 1 ms.
    Pls. suggest or come up with question to reach a solution.
    reg
    sanjeev             

    Hi,
    yah it's gigabit support and i have connected with fibre patch cord.
    My SWITCH port config is below.
    interface GigabitEthernet1/0/25
    switchport trunk encapsulation dot1q
    switchport mode trunk
    Controller sh run
    System Inventory
    Switch Description............................... Cisco Controller
    Machine Model.................................... AIR-WLC4402-12-K9
    Serial Number.................................... FOC1105F01E
    Burned-in MAC Address............................ 00:1A:6D:DD:23:00
    Crypto Accelerator 1............................. Absent
    Crypto Accelerator 2............................. Absent
    Power Supply 1................................... Absent
    Power Supply 2................................... Present, OK
    Press Enter to continue Or to abort
    System Information
    Manufacturer's Name.............................. Cisco Systems, Inc
    Product Name..................................... Cisco Controller
    Product Version.................................. 3.2.171.6
    RTOS Version..................................... 3.2.171.6
    Bootloader Version............................... 3.2.171.6
    Build Type....................................... DATA + WPS
    System Name...................................... SFA-CTRL2-HQ
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
    IP Address....................................... 10.156.11.231
    System Up Time................................... 0 days 11 hrs 9 mins 43 secs
    Configured Country............................... United States
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +38 C
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 4
    3rd Party Access Point Support................... Disabled
    Number of Active Clients......................... 115
    Press Enter to continue Or to abort
    Switch Configuration
    802.3x Flow Control Mode......................... Disable
    Current LWAPP Transport Mode..................... Layer 3
    LWAPP Transport Mode after next switch reboot.... Layer 3
    FIPS prerequisite features....................... Disabled
    Press Enter to continue Or to abort
    Network Information
    RF-Network Name............................. UNISFA
    Web Mode.................................... Enable
    Secure Web Mode............................. Enable
    Secure Shell (ssh).......................... Enable
    Telnet...................................... Enable
    Ethernet Multicast Mode..................... Disable   Mode: Ucast
    User Idle Timeout........................... 300 seconds
    ARP Idle Timeout............................ 300 seconds
    ARP Unicast Mode............................ Disabled
    Cisco AP Default Master..................... Disable
    Mgmt Via Wireless Interface................. Enable
    Bridge AP Zero Config....................... Enable
    Bridge Shared Secret........................ youshouldsetme
    Allow Old Bridging Aps To Authenticate...... Enable
    Over The Air Provisioning of AP's........... Enable
    Mobile Peer to Peer Blocking................ Disable
    Apple Talk ................................. Disable
    AP Fallback ................................ Enable
    Web Auth Redirect Ports .................... 80
    Fast SSID Change ........................... Disabled
    Press Enter to continue Or to abort
    Port Summary
               STP   Admin   Physical   Physical   Link   Link    Mcast     
    Pr  Type   Stat   Mode     Mode      Status   Status  Trap   Appliance   POE 
    1  Normal  Forw Enable  Auto       1000 Full  Up     Enable  Enable     N/A    
    2  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A    
    Press Enter to continue Or to abort
    AP Summary
    AP Name             Slots  AP Model             Ethernet MAC       Location          Port
    AP_MHQ_CMS_OFFICE    2     AIR-LAP1242AG-A-K9   00:19:30:76:75:42  default location  1  
    AP01-MHQ-HOM         2     AIR-LAP1242AG-A-K9   00:19:30:76:74:be  default location  1  
    AP01_MHQ_AIROPS      2     AIR-LAP1242AG-A-K9   00:1d:45:36:6c:84  default location  1  
    AP01_MSA_HOM_RES     2     AIR-LAP1242AG-A-K9   00:1d:45:36:6b:e2  default location  1  
    AP10-MHQ-CCITS       2     AIR-LAP1242AG-A-K9   00:19:30:76:74:82  default location  1  
    AP01-MSA2-TC5        2     AIR-LAP1242AG-A-K9   00:1d:45:36:6d:44  default location  1  
    AP01_MSA_CableTV_Room  2     AIR-LAP1242AG-A-K9   00:19:30:76:83:aa  default location  1  
    AP01_MSA_RUS_ROOM    2     AIR-LAP1242AG-A-K9   00:19:30:76:83:00  default location  1  
    AP01-MHQ-JLOC        2     AIR-LAP1242AG-A-K9   00:19:30:76:7f:d0  default location  1  
    AP01-MSA-C2-D        2     AIR-LAP1242AG-A-K9   00:19:30:76:74:90  default location  1  
    AP01_MSA_DA7         2     AIR-LAP1242AG-A-K9   00:19:30:76:80:38  default location  1  
    AP01_MSA_CMS_RES     2     AIR-LAP1242AG-A-K9   00:19:30:76:83:f0  default location  1  
    Press Enter to continue Or to abort
    AP Config
    Cisco AP Identifier.............................. 1
    Cisco AP Name.................................... AP_MHQ_CMS_OFFICE
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:19:30:76:75:42
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.240
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1107B3U8
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  0
        Radio Type................................... RADIO_TYPE_80211g
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1a:a2:d9:d3:60
          Operation Rate Set
            1000 Kilo Bits........................... MANDATORY
            2000 Kilo Bits........................... MANDATORY
            5500 Kilo Bits........................... MANDATORY
            11000 Kilo Bits.......................... MANDATORY
            6000 Kilo Bits........................... SUPPORTED
            9000 Kilo Bits........................... SUPPORTED
            12000 Kilo Bits.......................... SUPPORTED
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 1
          Number Of Channels ........................ 11
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 20 dBm
          Tx Power Level 2 .......................... 17 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 1
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 0
          Diversity.................................. DIVERSITY_ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 12 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 1
    Cisco AP Name.................................... AP_MHQ_CMS_OFFICE
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:19:30:76:75:42
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.240
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1107B3U8
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  1
        Radio Type................................... RADIO_TYPE_80211a
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1a:a2:d9:d3:60
          Operation Rate Set
            6000 Kilo Bits........................... MANDATORY
            9000 Kilo Bits........................... MANDATORY
            12000 Kilo Bits.......................... MANDATORY
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 36
          Number Of Channels ........................ 4
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 17 dBm
          Tx Power Level 2 .......................... 15 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 36
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 24
          Diversity.................................. DIVERSITY_ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 16 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 2
    Cisco AP Name.................................... AP01-MHQ-HOM
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:19:30:76:74:be
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.238
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1107B3W4
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  0
        Radio Type................................... RADIO_TYPE_80211g
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1a:30:e7:fc:30
          Operation Rate Set
            1000 Kilo Bits........................... MANDATORY
            2000 Kilo Bits........................... MANDATORY
            5500 Kilo Bits........................... MANDATORY
            11000 Kilo Bits.......................... MANDATORY
            6000 Kilo Bits........................... SUPPORTED
            9000 Kilo Bits........................... SUPPORTED
            12000 Kilo Bits.......................... SUPPORTED
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 1
          Number Of Channels ........................ 11
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 20 dBm
          Tx Power Level 2 .......................... 17 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 2
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 11
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 0
          Diversity.................................. Side A or Right Connector
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 12 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 2
    Cisco AP Name.................................... AP01-MHQ-HOM
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:19:30:76:74:be
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.238
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1107B3W4
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  1
        Radio Type................................... RADIO_TYPE_80211a
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1a:30:e7:fc:30
          Operation Rate Set
            6000 Kilo Bits........................... MANDATORY
            9000 Kilo Bits........................... MANDATORY
            12000 Kilo Bits.......................... MANDATORY
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 36
          Number Of Channels ........................ 4
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 17 dBm
          Tx Power Level 2 .......................... 15 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 36
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 0
          Diversity.................................. DIVERSITY_ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 16 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 3
    Cisco AP Name.................................... AP01_MHQ_AIROPS
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:1d:45:36:6c:84
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.232
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1135B2X7
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  0
        Radio Type................................... RADIO_TYPE_80211g
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1d:46:7e:d9:60
          Operation Rate Set
            1000 Kilo Bits........................... MANDATORY
            2000 Kilo Bits........................... MANDATORY
            5500 Kilo Bits........................... MANDATORY
            11000 Kilo Bits.......................... MANDATORY
            6000 Kilo Bits........................... SUPPORTED
            9000 Kilo Bits........................... SUPPORTED
            12000 Kilo Bits.......................... SUPPORTED
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 1
          Number Of Channels ........................ 11
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 20 dBm
          Tx Power Level 2 .......................... 17 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 6
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 0
          Diversity.................................. Side A or Right Connector
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 12 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 3
    Cisco AP Name.................................... AP01_MHQ_AIROPS
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:1d:45:36:6c:84
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.232
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1135B2X7
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  1
        Radio Type................................... RADIO_TYPE_80211a
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1d:46:7e:d9:60
          Operation Rate Set
            6000 Kilo Bits........................... MANDATORY
            9000 Kilo Bits........................... MANDATORY
            12000 Kilo Bits.......................... MANDATORY
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 36
          Number Of Channels ........................ 4
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 17 dBm
          Tx Power Level 2 .......................... 15 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 36
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 0
          Diversity.................................. DIVERSITY_ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 16 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 4
    Cisco AP Name.................................... AP01_MSA_HOM_RES
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:1d:45:36:6b:e2
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.239
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1135B2X1
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  0
        Radio Type................................... RADIO_TYPE_80211g
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1d:46:7e:d4:30
          Operation Rate Set
            1000 Kilo Bits........................... MANDATORY
            2000 Kilo Bits........................... MANDATORY
            5500 Kilo Bits........................... MANDATORY
            11000 Kilo Bits.......................... MANDATORY
            6000 Kilo Bits........................... SUPPORTED
            9000 Kilo Bits........................... SUPPORTED
            12000 Kilo Bits.......................... SUPPORTED
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 1
          Number Of Channels ........................ 11
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 20 dBm
          Tx Power Level 2 .......................... 17 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 11
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 0
          Diversity.................................. DIVERSITY_ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 12 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 4
    Cisco AP Name.................................... AP01_MSA_HOM_RES
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:1d:45:36:6b:e2
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.239
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1135B2X1
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  1
        Radio Type................................... RADIO_TYPE_80211a
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1d:46:7e:d4:30
          Operation Rate Set
            6000 Kilo Bits........................... MANDATORY
            9000 Kilo Bits........................... MANDATORY
            12000 Kilo Bits.......................... MANDATORY
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 36
          Number Of Channels ........................ 4
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 17 dBm
          Tx Power Level 2 .......................... 15 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 149
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 0
          Diversity.................................. DIVERSITY_ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 16 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 5
    Cisco AP Name.................................... AP10-MHQ-CCITS
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:19:30:76:74:82
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.233
    IP NetMask....................................... 255.255.254.0
    Gateway IP Addr.................................. 10.156.10.1
    Cisco AP Location................................ default location
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch.............................
    Secondary Cisco Switch...........................
    Tertiary Cisco Switch............................
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... Local
    Remote AP Debug ................................. Disabled
    S/W  Version .................................... 3.2.171.6
    Boot  Version ................................... 12.3.7.1
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1242AG-A-K9 
    IOS Version...................................... 12.3(7)JX6
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1107B3TJ
    AP Certificate Type.............................. Manufacture Installed
    Attributes for Slot  0
        Radio Type................................... RADIO_TYPE_80211g
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        WLAN Override ............................... Disabled
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 2
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:1a:30:e7:fa:60
          Operation Rate Set
            1000 Kilo Bits........................... MANDATORY
            2000 Kilo Bits........................... MANDATORY
            5500 Kilo Bits........................... MANDATORY
            11000 Kilo Bits.......................... MANDATORY
            6000 Kilo Bits........................... SUPPORTED
            9000 Kilo Bits........................... SUPPORTED
            12000 Kilo Bits.......................... SUPPORTED
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          Beacon Period ............................. 100
          DTIM Period ............................... 1
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 1
          Number Of Channels ........................ 11
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          RTS Threshold ............................. 2347
          Short Retry Limit ......................... 7
          Long Retry Limit .......................... 4
          Fragmentation Threshold ................... 2346
          Maximum Tx MSDU Life Time ................. 512
          Maximum Rx Life Time ...................... 512
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 20 dBm
          Tx Power Level 2 .......................... 17 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 1
          TI Threshold .............................. -50
          Antenna Type............................... EXTERNAL_ANTENNA
          External Antenna Gain (in .5 dBm units).... 0
          Diversity.................................. DIVERSITY_ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 12 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
    Cisco AP Identifier.............................. 5
    Cisco AP Name.................................... AP10-MHQ-CCITS
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:19:30:76:74:82
    IP Address Configuration......................... Static IP assigned
    IP Address....................................... 10.156.11.233
    IP NetMask.........

Maybe you are looking for