Cisco Prime NCS 1.3 Licensing issue

Hello,
I am installing Cisco prime NCS x 2 servers. I downloaded the licenses which are ordered allong with the devices as follows.
Product Name                : L-PI12-LF-50-LIC
    Product Description         : L-PI12-LF-50-LIC:Prime Infrastructure 1.2 - Lifecycle - 50 Device Lic PAK
    Product Qty                 : 1
    UDI                        : PID: PRIME-NCS-APL-K9
The issue is, the NCS appliance was not started properly and then I used the CD which came along with the server (NCS 1.3). Now my system is up and running but it is NCS 1.3 and when i upload the licenses, it shows that the UID is not matching with the system. Is this because the licenses are issued for NCS 1.2 and my system runs on 1.3? If so, what do you suggest, do i need to download NCS 1.2, install it, add the license and then upgrade to 1.3?
Thanks for your advise,
Regards
Jay

Prime Infrastructure has a support forum at:
https://supportforums.cisco.com/community/netpro/network-infrastructure/network-management
Please post this to that forum to reach PI experts.
Regards

Similar Messages

  • Issue with backup NCS via NFS (Cisco Prime NCS 1.2.0)

    Hello,
    Does someone have issue with backup NCS via externally mounted location (NFS)?
    I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:
    NCS/admin# backup ncs repository backup_nfs
    % Creating backup with timestamped filename: ncs-130131-0534.tar.gpg
    INFO : Cannot configure the backup directory size settings as the free space available is less than the current database size.
    You do not have enough disk space available in your repository to complete this backup.
    DB size is 25 GB
    Available size is 12 GB
    Please refer to the command reference guide for NCS and look at the /backup-staging-url/ command reference to setup the backup repository on an externally mounted location
      Stage 5 of 7: Building backup file ...
      -- complete.
      Stage 6 of 7: Encrypting backup file ...
      -- complete.
      Stage 7 of 7: Transferring backup file ...
      -- complete.
    I have tried to add additional space and use command backup-staging-url (my configuration: backup-staging-url nfs://server2008:/nfs), but it didn't help me.
    NFS share works perfect. I have checked it via NFS repository:
    repository backup_nfs
      url nfs://server2008:/nfs
    +++++++++++++++++++++++++++++++++++++++
    NCS/admin# show repository backup_nfs
    NCS-130130-1135.tar.gpg
    NCS-130130-1137.tar.gpg
    NCS-130130-1157.tar.gpg
    NCS-130130-1158.tar.gpg
    test-130130-1210.tar.gz
    Everytime when I try create backup I receive error message "You do not have enough disk space available in your repository to complete this backup".
    Does someone know how can I backup NCS system?
    Thank you

    How much space is availabe on that NFS mount point? It looks like to me from the error message that there is only 12 GB.... 
    The backup-staging-url is just for a space used to stage the backup before it is written-----

  • Cisco Prime NCS appliance & license

    Hi all,
    I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:
    1. Does the appliance has any license coming with it or we need to order the license separately?
    2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ?
    Thanks for the help,

    Cisco Prime Infrastructure for the  first time you may access the lifecycle and assurance features using the  built-in evaluation license that is available by default. The default evaluation  license is valid for 60 days for 100 devices and 150 interfaces. You will need  to purchase the base license and the corresponding feature license before the  evaluation license expires. Cisco Prime Infrastructure 1.2 can be ordered using  the standard Cisco® ordering tools at http://www.cisco.com/go/ordering. More information about getting the  license files can be found in the Cisco Prime Infrastructure 1.2 Ordering and  Licensing Guide

  • CISCO PRIME INFRA 1.1 License

    Hai Recently, we are installing cisco Prime NCS 1.1  and we are facing some issue for License.
    I would like to clarrify the below licneses.
    L-WCS-NCS1-M-K9
    L-PINCS11-300-U
      L-PINCSW11-300-U
    We installed the second licnese and got 300 device limit. But we have 500 access points in our network. We are using NCS only for Wireless Management and not for Network Devices which is using LMS .
    I am confused, we have additional 2 more licenses as above and why is that for??? can any one let me know these!!! Y we are using WCS-NCS license and it is having lonly 25 device limit support , which we cannot import since i already upload the second licnes. Also y this L-PINCSW11-300-u WAN license used for????

    You can always remove the license if you installed the wrong license....You need to install your base first then your adder.  You don't need to use the LMS or WAN as this comes free with NCS 1.1.  The WCS to NCS migration comes with a free 25 ap base license.  You just need to make sure you have purchased the correct license to cover your 500 ap count.
    Here is another thread regarding the license:
    https://supportforums.cisco.com/message/3672947#3672947
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Cisco Prime LMS appliance Compatibilty with Cisco Prime NCS

    Hi,
    Is it possible if we can install Cisco Prime LMS 4.2 in the appliance which is inbuilt with Cisco Prime  NCS .
    We have PILMS42-1.5K-U license available with us.
    Rgds,
    Kamal

    One can install either LMS 4.2 or NCS on the a physical (software on PRIME-NCS-APL-K9 hardware) or virtual appliance (software installed on customer-provided VM).
    The two products (NCS and LMS) cannot coexist on a given appliance instance. This is due to change in the future as LMS and NCS merge under the Cisco Prime Infrastructure 2.0 release but for now they are distinct and separate products with a common approach and similar look and feel but requiring separate servers, whether physical or virtual.
    Please refer to the ordering and licensing guide here.

  • Cisco Prime NCS Recovery

    Hi,
    A Cisco Prime NCS physical appliance has been shipped with version NCS 1.1
    Then it has been upgraded to:
    1) ncs_patch-1.1.0.58-upgrade-12.tar.gz
    2) PI-upgrade-bundle-1.3.0.20.tar.gz
    Our customer have got only 1.2 licenses.  How can we downgrade the appliance to 1.2 ?
    Or how can we re-install 1.1 or 1.2,   for both versions we did not find the iso's to download.
    Thanks in advance

    Hello,
    What is the Current  verison of NCS  ,you are using ?
    AFAIk, you can Installed PI 1.3 directly as PI 1.2 is not available for download.
    Conatct the License Team and they will re-host the license for you.
    you can downlaod the iso file from the below link:
    http://software.cisco.com/download/release.html?mdfid=284652876&flowid=38562&softwareid=284272932&release=1.3&relind=AVAILABLE&rellifecycle=&reltype=latest
    Note:Upgrade from Cisco Prime Network Control System 1.1.2.12 or 1.1.3.2 to Cisco Prime Infrastructure 1.3.0.20 is not supported.
    Thanks-
    Afroz
    [Do rate the useful post]
    ****Ratings Encourages Contributors ****

  • Cisco Prime NCS fail webpage

    Hello everyone
    im new here. but i have a question. its about the Cisco Prime ncs.
    i have installed the Cisco Prime with a ova file on a VM-ware server.
    i have configured the cisco prime with the setup at the beginning. but the problem is that i can't get the
    webpage to work. when i go to the https://ip-address. when i try to login with my admin user at the webpage
    it say's that it is a invalid username and password.
    wat must i do to be able to login to the webpage. is there like a different user for this..?
    thank.

    Hi
    We're experiencing the same problem. But are you sure of the way that you resolved the issue?
    We have both NCS and NCS (WAN) 1.1.
    NCS-VA-1.1.0.58.ova is the installer for NCS
    NCS-WAN-VA-1.1.0.1114-small.ova is the installer for NCS WAN 1.1
    We cannot logon to the NCS WAN using the root login/password. I have already tried configuring again the root password but error occurs.Until now we cannot logon to NCS WAN.
    Any recommendations on this?

  • Cisco Prime NCS 1.3

    I am running Cisco Prime NCS 1.3 and I have two questions that I hope someone can help me out with. 
    Question 1). Is it possible to forward the Rogue Device Logs back to our SIEM server? If so how?
    Question 2). How do I setup the Mail Server Configuration? The part I am stuck on the is the Primary SMTP server.  For the username and password don't know what username and password I should use. Should I use the account I am logged into NCS prime ?
    Thanks for any help or input.
    Weiss

    Weiss,
    Re your first question. Prime itself cannot forward syslogs messages it receives. You may need to setup your wireless controller to use a secondary syslog server as your SIEM server.
    Re the second, username and password is optional and only used when your mail server does not allow unauthenticated users from relaying mail.
    If it allows that, you can leave those fields blank.
    If it does require authentication, you should have a service account created on the smtp server for use by Prime when sending outgoing mail.

  • Cisco Prime NCS v1.1 Eval Download

    Hello,
    I've been trying to download the evaluation of Cisco Prime NCS v1.1 from the eval page located at the below address so I could, well, evaluate it.
    https://cisco.mediuscorp.com/market/networkers/productView.se.work?/nxt/rcrs/proieidentity/=19841
    But I've been getting corrupt downloads and can't extract the .OVA file.  I've tried this on a few computers and 2 different OSs, but to no success.
    Am I doing something wrong?
    Thank you in advance and sorry if this is the wrong forum to ask this question.

    @wireless.wlc
    I installed it on a Cisco UCS server running vSphere 4.1 (ESXi).  The template wants to make it thick provision, but for testing purposes I just made it thin provision.  After only adding maybe... 20 switches, 18 APs and 1 WLC it takes up just shy of 40 GB.
    If you try to install on a 50GB hard drive or a datastore that's less than 200GB available, it will probably just give you a warning.  But I'm not 100% sure since this is being deployed from from an OVA template.
    I'll install it again on a datastore with only 100GB to test and see if it works that way.

  • How to choose Cisco Prime NCS

    Dear Cisco Team,
    I would like to know what are the main facts to choose Cisco Prime NCS.
    And how many kind of monitoring system are there in Cisco.
    Best Regards,
    Thet Htar

    Hi Thet,
    Cisco Prime Infrastructure simplifies the management of wireless and wired networks. It offers Day 0 and 1 provisioning, as well as Day N assurance from the branch to the data center. We call it One Management. With this single view and point of control, you can reap the benefits of One Management across both network and compute.
    Prime Infrastructure enables you to configure and monitor one or more controllers, switches and associated access points. Prime Infrastructure includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
    Read the below link  for more detail::
    http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/ovr.html
    You can download it from here and use it under evaluation period for testing::
    https://software.cisco.com/download/release.html?mdfid=286236028&flowid=72882&softwareid=284272932&release=2.2&relind=AVAILABLE&rellifecycle=&reltype=latest
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Difference between Cisco Prime Infrastructure and Cisco Prime NCS

    Dear All,
    I am currenctly confused in choosing what type of Cisco Prime.
    1.Which one should I choose? should I order Cisco Prime NCS or directly purchase Cisco Prime Infrastructure (since Cisco Prime Infrastructure has the feature of NCS)?
    2, Why does Cisco not just  remove the Cisco Prime NCS ordering Part Number since Cisco Prime Infrastructure already cover the NCS?
    Please advice me

    Hortono,
    I started to write a long and lengthy msg about my experience with this, but instead, let me direct you to the horses mouth.  There have been weekly webinars in regards to Cisco Prime (many differnt products under this headline) including Infrastructure.  I believe the Cisco PI is actually scheduled for Thursdays, so hopefully you'll look at this in time to catch it and ask your questions from the gurus.
    https://ciscosales.webex.com/ciscosales/j.php?J=200462944&PW=NMzhhNjM5OGU3
    Looks like this may be the last week, catch it if you can.

  • Difference between cisco prime NCS and cisco WCS

    hello
    i have a question. I am just started with testing cisco prime ncs
    i have worked with cisco WCS
    now i was wondering wat the difference is between these two
    can someone please explain it.
    thanks allot

    They are both very similiar in functionality.  The major difference is that NCS offers a basic switch management front end and allows you to see your wired clients just as you would your wireless.  Other then that, the I've found the latest version of NCS to run quite a bit smoother and faster then my WCS install of several years, slicker graphics.  I would recommend using NCS in Chrome for the best view.

  • Cisco Prime NCS 1.2.1.012 nms stopped

    Hi all,
    Got an issue with nms server stopped, it is the full 3300 appliance not a vm, have tried:
    1.
    ncs stop
    ncs cleanup
    ncs start
    2.
    ncs stop
    ncs redidb ( off the top of my head can't remember exact command for that one)
    ncs start
    3.
    tried reboot after ncs stop
    Getting this ouptu on ncs start:
    As first time is not present - removing .dbCreated
    Starting Network Control System...
    Unable to verify hardware.
    This may take a few minutes...
    Also on ncs start verbose getting a massive error:
    Processing Service Name: NMS Server
    Remoting 'Matlab Server' started successfully.
    Starting NMS Server
    Checking for running servers.
      Checking if DECAP is running.
      00:00 DECAP is not running.
    00:00 Check complete. No servers running.
      00:11 DECAP setup complete.
      Creating the DB schema
    Removing configuration folder on DB clean
    DDL execution of the script /opt/CSCOlumos/bin/aems_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/aems_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/compliance_engine_schema.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
    tup.
            DDL execution of the script /opt/CSCOlumos/bin/compliance_engine_schema.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting X
    MP startup.
    DDL execution of the script /opt/CSCOlumos/bin/cr_proc_drop_part.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/cr_proc_drop_part.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
    tup.
    DDL execution of the script /opt/CSCOlumos/bin/disableStats.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/disableStats.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_exclude_list.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_exclude_list.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP st
    artup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_mainpage_view.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_mainpage_view.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP s
    tartup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_indexes.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_indexes.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_foundation_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
    startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_foundation_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exit
    ing XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
    tup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_default_data.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP st
    artup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_default_data.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting
    XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
    tup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_sp.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_sp.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
    up.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_mt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_mt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
    tup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_syslog_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_syslog_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
    rtup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
    rtup.
    DDL execution of the script /opt/CSCOlumos/bin/ifm_swim_default_repo.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
            DDL execution of the script /opt/CSCOlumos/bin/ifm_swim_default_repo.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
    startup.
    DDL execution of the script /opt/CSCOlumos/bin/job_schema_update.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/job_schema_update.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
    tup.
    DDL execution of the script /opt/CSCOlumos/bin/ncs_api.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/ncs_api.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/wcs_dropFKs.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/wcs_dropFKs.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/wcsutils.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/wcsutils.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/wda_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/wda_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/wirelessAlarmSpecificId.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
    up.
            DDL execution of the script /opt/CSCOlumos/bin/wirelessAlarmSpecificId.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XM
    P startup.
    DDL execution of the script /opt/CSCOlumos/bin/xmp_credential_mgr_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startu
    p.
            DDL execution of the script /opt/CSCOlumos/bin/xmp_credential_mgr_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
    startup.
    DDL execution of the script /opt/CSCOlumos/bin/xmp_fingerprints_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/xmp_fingerprints_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP s
    tartup.
    DDL execution of the script /opt/CSCOlumos/bin/xmp_preference_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/xmp_preference_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
    rtup.
    DDL execution of the script /opt/CSCOlumos/bin/xmp_quartz_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/xmp_quartz_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
    DDL execution of the script /opt/CSCOlumos/bin/xmp_rbac_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/xmp_rbac_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
    DDL execution of the script /opt/CSCOlumos/bin/xmp_usermgmt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
            DDL execution of the script /opt/CSCOlumos/bin/xmp_usermgmt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
    up.
    Any ideas ?

    Hi Ben:
    There are .iso images for both Prime Infrastructure 1.2.1 and the current release, Prime Infrastructure 1.3.0.20 that can be downloaded and burned to a Dual Layer DVD (in a Dual Layer DVD burner) and used to reimage the physical appliance with.  These physical appliances shipped from a factory with a hard drive that has magnetic  representations of 0 and 1 on it, it's entirely possible something  happened to something to the data in transit.  Reimaging puts everything back to square one and completely rules out the  possibility of anything being corrupted. 
    Once it's running again, be sure to check out and install the Update 1 patch for Prime Infrastructure 1.3.0.20 (filename PI_1.3.0.20_Update_1-12.tar.gz).
    Release Notes for Update 1 for Cisco Prime Infrastructure 1.3.0.20

  • Cisco Prime Infrastructure 1.2 licensing

    I have a customer that is running CiscoWorks 3.2 and they also have NCS 1.1 (upgraded from WCS 7.0).  They have found that it costs way more to upgrade CiscoWorks to Cisco Prime Infrastructure than it would be to just buy licenses after they finish upgrading NCS to Cisco Prime 1.2. 
    The main question about Cisco Prime 1.2 is how the licensing works, we need to know if the licensing will work the same as it did for CiscoWorks where they only needed one license for a full stack of switches.  They believe that Prime 1.2 will require a license for each switch in the stack, which will cause them to buy several more licenses than what they feel they can afford.
    If anyone knows how the licensing works, it would be appreciated.
    Thanks.

    Have you gone through the below link
    http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide_c07-714720.html

  • Migrate from WCS 7.0.172.0 to Cisco Prime NCS

    Is there anyway to migrate off of WCS to Prime NCS? We have a fully built WCS system with maps and all configs and was wondering if there was a way to restore to NCS.

    Yes, this is possible.  Here is the link from the NCS release notes on the process.
    http://www.cisco.com/en/US/docs/wireless/ncs/1.0/release/notes/NCS_RN1.0.0.html#wp83675
    Steve

Maybe you are looking for

  • I cannot get into my iTunes. When I try to load it, I get a message that says iTunes has stopped working. What do I do?

    I cannot get into my iTunes. When I try to load it, I get a message that says iTunes has stopped working. What do I do?i Have uninstalled and reinstalled both iTunes and Quicktime already, Did not make a change

  • Aperture 3.3.2: Import: Append and Replace button behind Metadata window

    Hello, when doing an import of some pictures in an already existing project, I saw that the Append and Replace button (for "Metadata" under "Metadata Presets") are almost completey hidden behind the Metadata input window. See: It is impossible to see

  • IPod Touch gen 2 disabled

    I have the old iPod Touch (Gen 1 or 2), my friend disabled it, and it says to connect to iTunes. When I connect it to iTunes it says "This iPod cannot be started because the Apple Mobile Device service is not started" What do I do to fix it?

  • MSS report not showing

    We are trying to use the Reporting iview (com.sap.pct.erp.mss.reporting) to display standard reports from ECC, such as Birthday and Gender and Age reports.  We have not done any specific config, so we are using the RPT0 scenario to display all the re

  • What happened to Safari prompt before closing

    Safari used to give  a prompt if you were closing multiple windows - when clicking on the red button.  In the current version that seems to have disappeared.  Can I get it back?