Cisco Prime -report

I have installed Cisco prime infrastructure 2.2 and configured it.
Now i want Per switch Per vlan traffic and per switch per vlan session
for that what i have to do please suggest me as soon as possible 
Switches is 2960 and 3750X.
Please suggest me and i want that report also..

Your layer 2 switches won't give you much of anything as far as traffic per VLAN as they do not have any interface to report against. The router (or layer 3 switch) which is the gateway for your VLANs can be queried to show the traffic for the Layer 3 Switch Virtual Interface (SVI). That shows up like any other interface in the performance reports.
I'm not sure what you mean by "per vlan session". Can you explain (preferably with an example of how you would do that from command line)?

Similar Messages

  • Cisco Prime Reports

    Hi
    I am new to cisco Prime infrastructure, want to understand the generation of the reports in report launch pad.
    I have followed procedure as per the document, Report launch pad-->Report Type-->New
    Need clarification on fields
    Report Title- Report title should be suffixed with Virtual DomainName,  can we mention the report title without any domain name and what difference does it make.
    Connection Protocol-- I am unable to find the connection protocol field
    Scheduling - How the scheduling will be done, based on the reporting period
    Export Format- Default file locaion, where exactly it will be, how to find it.
    Destination- can we extract report without marking the destination
    Please help!

    Wireless Network Utilization
    This report shows the overall network utilization based on the aggregated port utilization of all controllers in your network. These statistics can help identify current network performance and help with capacity planning for future scalability needs.
    Note Average utilization (%) is the percentage of utilization where utilization is calculated as ((Tx+Rx)/bandwidth).
    Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/user/guide/prime_infra_ug/reps.html#pgfId-1060053

  • Cisco Prime Infrastructure 1.3 - reports

    Hi all,
    I am curious if anybody can help me with Cisco Prime reports. What I want to do is to create report of all my devices which will have information such as hostname, IP adress, . . . , an serial number. I found this task almost inpossible... When I look at the device work center tab and click on one of my devices I can see alll of the information I want (so good so far all infromation are available..but..)When I want to create such a report from all of devices in report section I pick up Detail Device Inventory and customize report which I want. Problem appears after report is done. The main ifnormation such as hostname, location an IP adress are in the first part of report and in the second part there are chassis information with serial number and other fields. But these two parts of report dont have any common field so it is impossible for me to match serial number to hostname..So if I dont want to click on every device in device work center and write down all of information I dont know how to do such a simple task...
    I hope someone is able to follow my thoughts
    Thanks for any answer
    Martin

    Robert-
    If you create a separate service rule, you can have it fork TACACS authentication requests from that specific IP to a different Service identity and authorization process, where you can tell it to select a specific shell profile.  Then all you have to do is create a separate shell profile for managing Prime and have that one selected.  We do this with our UCS dvices, regular router/switch CLI logins, etc.
    So for example:
    UCS: TACACS request --> if match service selection rule "from UCS devices", go to UCS admin access policy -->  if match ucs admin identiy reqirements, give UCS admin shell profile
    PI: TACACS request --> if match service selection rule "from PI devices", go to PI admin access policy -->  if match PI admin  identiy reqirements (which are same as UCS), give PI admin shell profile
    Default: TACACS request --> if match tacacs protocol from our IP range, go to default device admin policy --> if match defaul identy requirements, give default admin shell profile

  • Cisco Prime Rogue AP Report - No Rogues from 3702 Series AP's

    I am running Cisco Prime Infrastructure (2.1) that manages a Cisco 5508 WLC (7.6). We have multiple version of AP's managed by this WLC to include 1142, 2602, 3702, etc...In Cisco prime when we run a Rogue AP Report. None of the Rogue AP's discovered by 3702's are displayed in the report. The Rogues show on the WLC though from all AP's. Cannot find a reason for this. Any ideas?

    The Rogue alarm state always stays on "removed" once deleted
    CSCuo91446
    Description
    Symptom:
    Once one of the alarm of rogue AP is deleted the newer rogue AP alarm changed to removed state even for different mac address.
    Because of the removed state the detecting AP which detected the rogue is not displayed
    Conditions:
    1) Auto SPT is turned on
    2) Prime 2.0 or 2.1
    Workaround:
    Click on refresh from network for each alarm in removed state or disable auto spt
    Last Modified:
    Jun 30,2014
    Status:
    Fixed
    Severity:
    3 Moderate
    Product:
    Cisco Prime Network Control System Series Appliances
    Known Affected Releases:
    (1)
    2.1(0.0.1)

  • Cisco Prime Collaboration Assurance IPPhone 3901 no serial number report

    Hi All,
    I have installed Cisco Prime Collaboration Assurance in my office and try to create phone inventory report , so far no problem , but when i add IPPhone 3901 there no serial number in the report , I have enable web access on the phone , i can see the serial number by click the IP  .
    any help ?
    Best Regards,
    Tommy

  • How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

    How can I get CDP neighbor information from access point reports in Cisco Prime 2.0?  I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point.  I thought that information was in there, however I cannot seem to find it.
    Thanks in advance!

    Hi
    You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
    Regards
    Rasika
    **** Pls rate all useful responses ****

  • Cisco Prime Infrastructure 2.1 Not generating reports

    Dears,
    I am new to Cisco Prime. I installed Cisco Prime Infrastructure 2.1 for 60-days evaluation and i added routers, switches and APs. I configured SNMP community and telnet credentials. I can see clients on Dashboard, but when i go to reports and generate them for last hour, it displays "None Detected".
    Please advise.

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • "Busiest Clients" report template on Cisco Prime & Aironet 1242AG

    Yesterday I was trying to schedule a "Busiest Clients" report on our Cisco Prime physical appliance (PRIME-NCS-APL-K9, v2.1.0.0.87).
    My goal was to monitor the busiest clients on a couple of old Aironet access-points. These APs have been installed in a branch office of our university that rely on 4 Mb/s SHDSL WAN connectivity and, as you might imagine, some saturation occurs when the classrooms are crowded.
    Unfortunately, all the reports were empty ... there was only a "No data matches the specified criteria for the report” warning inside.
    The Client Statistics task (Administration>Background Tasks) was enabled and I was able to run this report selecting a different floor area ... after a few tries I've discovered that this error occurs only when the old Aironet 1242AG APs are involved. If I select a floor area populated with the newer 1142 and 2602 models, the report template works as intended.
    So, is there a way to fill a "Busiest Clients" report with data fetched from our old Aironet 1242AG APs?
    Our WLC is a Cisco Wireless Services Module 2 Controller for Cisco Catalyst 6500 (WS-SVC-WISM2-K9).
    (Sorry ... my English is a bit rusty)

    Hi,
    Kindly try to restart the Dameon manager with the command line of the server
    1> net stop crmdmgtd
    and then start the daemon manager --> net start crmdmgtd (wait for atleast 20-25 minutes before login back to LMS and also see if any file do exist at location CSCOps\Objects\dmgtd\ready folder).
    Get the output of pdshow after waiting for 20 minutes and stdout.log and stderr.log from CSCOpx\MDC\tomcat\logs.
    Many Thanks,
    Gaganjeet

  • Cisco Prime - Custom Inventory Change Report?

    Hi,
    Cisco Prime has this report:
    Reports > Inventory > 24-hour Inventory Change
    The problem is that the Report reports things that I don't want to track, like changes in "NVRAM Used",  Interface Speed, etc...
    Is it possible to configure Inventory Change so that it would not check some itens?
    Thanks.

    Thanks for answering,
    my report has, for example, the following information:
    Changes for Device: router01
    Processor Identity: ProcessorID = 3
    Attribute           Type of Change           Time Change Detected           Previous Value           Current Value
    NVRAM Used (KB)           Changed           2014-02-21 00:10:00.69           16923           16953
    I saw that Syslog Automated Actions > Inventory Fetch has very useful configuratios, but I think that it is still not what I need. The screen you pointed out was related to messages from Syslog that triggers inventory collection.
    What I need is in the image below.
    All right, NVRAM changed it's current used size. For me, it is completely useless to know about that every day in my Inventory Change report. That information is flooding my report. How to remove it from future reports?
    Thanks again!
    Message was edited by: Leonardo Machado

  • Can Cisco Prime send a peer to peer connectivity report

    I'm trying to discover if we have any peer to peer wireless clients (not ad-hoc WLANs) talking to each other.  I was asked to turn off peer to peer on the wireless network, so I need to find out if there are any clients talking to one another, and if so, what are they, etc.
    I've looked through the reports and didn't see anything there. 
    We have Cisco Prime 7.2, 5508 WLCs and MSE.           

    Please check the below link:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/reports/system_reports.html

  • CISCO PRIME INFRASTRUCTURE NETFLOW TRAFFIC REPORT

    Hi,
    I have a report from cisco prime infrastructure, that I don´t know how to interpret,  because the fields in the report I don´t know what´s mean them,  the difference between them, what are optimal values, the worse values, etc.
    Can someone help me with this
    The name of the report is: FLEX NETFLOW TRAFFIC TQPQ
    The fields that I don´t know what are:

    hello,
    I also have a problem concerning the interpretation of the report that I got. if anyone knows how Cisco gets its premium reports, it will help me!

  • Cisco Prime Infrastructure - Is there a report of unused switch ports?

    Hello,
    Is there a report in Cisco Prime Infrastructure 1.4 showing the unused switch ports?
    There used to be one in Cisco Prime LMS (Reclaim Unused Up/Down Ports Report).
    Thank you,
    Luke

    Hello,
    I now have Cisco Prime Infrastructure 2.0 running, and I don't see a report like the "Reclaim Unused Up/Down Ports" report that existed in LMS.
    I found one called "Interface Capacity", but it only shows the number of ports that are "connected", "notconnect" or "disabled".
    Does anyone know if a report of Unused ports exists in Prime Infrastructure 2.0 or if it will be available later on?
    Thank you,
    Luke

  • Cisco Prime Infrastructure 2.1 Custom Reports

    Hi, I need to generate a custom Guest User report from Cisco Prime Infrastructure 2.1. It needs to have a couple more fields added to the existing "Guest User Association" report.
    Is it possible to connect to the Cisco Prime Infrastructure Database and Generate custom reports? Is there any documentation on this?
    Thanks

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

    What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

    • PI provides visibility for autonomous  clients within the same list view as lightweight and wired clients (client list  page).
    • Rogue AP detection for autonomous AP's is not supported (it's  supported in CUWN). 
    • Alarms/events for client authentication issues (e.g.  authentication failure) are displayed in PI.
    • Config management for  autonomous AP's is via CLI template.  Config comparison and archiving  functionality in PI leverages these same features that were brought in from LMS,  so need to defer to others in terms of whether this is a cross-platform feature  in PI or is only supported on a subset of platforms.  Config comparison/archive  is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and  Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client  sessions, etc.) reports, and there are extensive reports for CUWN

  • When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

                       We are running Prime Infrastructure 1.3 primarily for wireless management at this point.  We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out.  While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features.  For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers.  I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment.  Does anyone know when it's officially being released?  Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are?  I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management.  Any useful information or links would be appreciated.
    Thanks,
    Christian

    PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
    I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
    For what does it have for customers?
    > As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
    As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
    With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
    -Thanks

Maybe you are looking for

  • ERROR IN MIRO POSTING ENTRIES WITH CENVAT CLEARING ACCOUNT

    Hi,           I'm facing a problem while posting in MIRO, instead of CENVAT clearing account RG23A BED acocount is getting debited, here I'm giving you the screen shots for MIGO and MIRO accounting entries please assist me with some customizing tips.

  • 24" iMac display issues

    OK, the display brightness issue exsists. There is some software out there that does help (Gamma Control). So it seems like it can be fixed. Is Apple going to address this issue? Some people are saying that Apple is catering to the average consumer (

  • SQLJ compile failure in derived class

    I have successfully comiled and run the "SimpleExample" defined in the Help Topics "Developing Applications Using SQLJ" page. However, if I make a simple modification to make the class derived from another class (DoNothing class shown below is the si

  • VoIP calling on the N82?

    I had a few questions about the internet calling on the N82 1. How does this work? How do you set it up? 2. Is it free? Do you actually get to call long distance, to Europe, China, etc. areas for free? 3. Is there a catch to it? 4. Can I set up anoth

  • Apple keyboard not working after installing new monitor

    Yesterday I installed a new monitor - HP EliteDisplay E231i - to my Late 2013 Mac Pro.  Previously I had been using super old apple monitors.  My apple keyboard was working great - I had it plugged into the new monitor itself.  I shut down the comput