Cisco Security Manager Client running on Windows Server 2008 R2 (64 bit) in Terminal Service
Hello CSM Gurus,
Would there be any performance issues in CSM client software design if multiple instances of CSM client by multiple users ran concurrently on a Windows Server 2008 R2(64 bits) while CSM users accessing the server via Remote Desktop Services ?
In my environment, we have a CSM server at our major data center while security administrators from all over the world need to use this CSM server.
In order to overcome the latency of the CSM client due to the WAN network, the plan is to use a Windows Server 2008 R2(64bits) as a terminal server and all security administrators would need to access this terminal server via RDP and would launch CSM client on their desktop. The terminal server locates on the same LAN as the CSM server itself in order to minimize network latency in communications between the CSM clients running on the terminal server and the CSM server. there would be multiple instances of CSM clients running concurrently on the Windows Server 2008 R2, the terminal server.
Hi;
please check
Oracle Database 11g Release 1 (11.1.0.7.0) <<Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle11g/111070_win64_2008soft.html
Check Database 11g Release 2 Certification Highlights [ID 1065024.1]
But please check this thread
client 11gR2 install on Win 7 Pro fails java.lang.NullPointerException
Regard
Helios
Edited by: Helios- Gunes EROL on May 14, 2010 4:49 PM
Similar Messages
-
Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.> * explorer.exe is blocked already, but users are able to enter the
> Windows Explorer by clicking on the name which is visible on the
> Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?
Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KCHi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC -
Does Safari run in Windows Server 2008 R2 (Terminal Services)?
does Safari run in Windows Server 2008 R2 (Terminal Services)?
Hi Jess,
Here are two things I suggest you check:
The Monitoring interval is set to 900 minutes, would the profile size get reduced after 15 hours and run
gpupdate/force?
Since the Sessenv.dll version is higher than the ones described in KB 2575946, the issue is supposed to be fixed. I suggest you run System File Checker to scan all protected system files.
In addition, you can also collect Gpsvc.log to determine if policies are applied successfully.
More information for you:
System File Checker (sfc)
http://technet.microsoft.com/en-us/library/bb491008.aspx
Group Policy not being applied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9884d06d-b5f8-44c9-a703-7b5211f1e0ba/group-policy-not-being-applied?forum=winserverGP
Best Regards,
Amy -
Installing forms 11gr2 services on windows server 2008 r2 64 bit
hello,
I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
Question.
1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
2. Can I used it without the fusion middleware?
3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
5. It is will be a AS server even if without the repository creation?
Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
Thank you very much.... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server. -
BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit
We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
Any ideas?
Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PMWe have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
Thanks in advance for the advice. -
Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine
I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit
Good night Oracle community,
I'm having problems on using Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit that runs inside a virtual machine.
The first problem was the error ORA-12152 (unable to send break message) when using a 32-bit server version when trying to connect via SQLPlus using domain administrator user. I did reboot, tnsping, checked parameters and oracle support articles but neither help me. So I uninstalled it and installed the 64-bit version and it wasn't possible to run the applications like netca.
Now I installed it on a local profile version 32-bit to see if the problem was related to the domain.
My question is simple: is this environment ok to run a production database server? 11.2.0.3 is that stable with Windows 2008?
Thank you very much!Oracle Database 11.2.0.3.0 is certified on Microsoft Windows (32-bit) 2008.
Error: ORA 12152
Text: TNS:unable to send break message
Cause: Unable to send break message. Connection probably disconnected.
Action: Re-establish connection. If the error is persistent, turn
n tracing and reexecute the operation.
Refer to MOS
ORA-12152 "Unable To Send Break Message" on Connection [ID 363638.1] -
Correct version for windows server 2008 Standard 64 bit
Hi could you help me to download the right version to install adobe reader in a machine running Windows server 2008 with 64 bit, since this machine doesn't have internet access I would need the offline installer but I don't know where to get it.
ThanksIs this just for people sat at the server as if it were a workstation? Use the Windows 7 version.
-
Installing CF9 on Windows Server 2008 Standard 64-bit
Hi-
I'm attempting to install a new ColdFusion configuration with a host who is useless regarding the support that they offer (for now, they shall remain nameless).
It's a Windows Server 2008 Standard 64 bit VPS configuration. MySQL is already installed so I'm on the hook to configure ColdFusion 9 with IIS (7.5, I believe). There are numerous settings which the installer does not seem to address so I've had to address several Module Mappings which failed during the install....
Can anyone point me to an installation doc for the above configuration? Will the CF installer eventually handle these issues or are we on our own to support this?
Thanks in advance,
RichMy advice is to get out now and go to a site like hosting.com that has a solid track record hosting CF. There are several others to choose from. If they are starting this rough you will have constant problems.
-
Installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
i have installed this but restarting of server making problem
i m not able to start opmn.ctl
what should i do is there any other version to be downloaded
I did.
1. i installed X 86 software as 64 bits is available for itanium only
2. it installed successfully after changing value in orapram.ini
now after reboot of server my opmnctl doesnt come up
what can be the issue?hi,
1st..check whether all the services of oracle are started in services.msc(if possible pls specify what all services of oracle can you see in services.msc)
2nd..when you use the command opmnctl startall..what errors do you get..
3rd..can you specify the opmn.logs and ons logs
Regards
Fabian -
Windows Server 2008 Standard 64 bit edt support Hyper-v replication
Dear Team.
Windows Server 2008 Standard 64 bit edt support Hyper-v replication or not.
If my primary physical server down so my secondary server act as primary server.Hi,
Windows Server 2008 Hyper-V do not Support Hyper-V replica.
This is a new Feature in Hyper-V for Windows Server 2012.
http://technet.microsoft.com/en-us/library/hh831410.aspx#BKMK_Replica
Regards
Sebastian -
Downgrade Windows server 2012 64 bit to windows server 2008 R2 32 bit
HI,
what I want to know is when Downgrading Windows server 2012 64 bit to windows server 2008 R2 32 bit, will there be any issues of the license? Can I use the same license of 2012 server for the new 2008 installation.Hi,
Based on my experience, we cannot use the Windows Server 2012 license key to activate a Windows Server 2008 install.
In addition, which channel the windows server 2012 was purchased through? It seems that the media and product keys to downgrade are not provided although downgrade rights are granted
since Microsoft only supplies bits and product keys to Volume License customers and only for certain versions and editions of the software.
I recommend you to contact the Licensing Activation Centers below for assistance:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best regards,
Susie -
Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: 2/12/2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: 2/12/2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: 2/12/2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: 2/12/2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: 2/12/2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: 2/12/2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipeHi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support -
Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created
Hi There,
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
DCRServer is down or may not be completely up. Check if the DCRServer process is running.
And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Thanks,Also Here is more info output:
C:\Program Files (x86)\CSCOpx>pdshow -brief
Process State Pid
Tomcat Program started - No mgt msgs received 1572
TomcatMonitor Running normally 2236
Apache Program started - No mgt msgs received 2436
DataPurge Administrator has shut down this server 0
DCRServer Failed to run 0
CMFOGSServer Administrator has shut down this server 0
EssentialsDM Administrator has shut down this server 0
ConfigMgmtServer Never started 0
ConfigUtilityService Never started 0
CTMJrmServer Administrator has shut down this server 0
ChangeAudit Never started 0
SyslogAnalyzer Program started - No mgt msgs received 2976
ICServer Running normally 5096
EnergyWise Never started 0
PMCOGSServer Administrator has shut down this server 0
IPMOGSServer Administrator has shut down this server 0
IPMProcess Never started 0
TISServer Program started - No mgt msgs received 2544
DFMOGSServer Program started - No mgt msgs received 876
InventoryCollector Running normally 3052
Interactor Program started - No mgt msgs received 5136
InventoryCollector1 Program started - No mgt msgs received 5144
Interactor1 Program started - No mgt msgs received 5308
PTMServer Program started - No mgt msgs received 5320
UPMProcess Never started 0
TISDiscoveryJobCreate Administrator has shut down this server 0
SyslogCollector Running normally 5340
Proxy Program started - No mgt msgs received 5348
PMServer Running normally 5360
NameServer Program started - No mgt msgs received 5680
NameServiceMonitor Running normally 5876
LicenseServer Program started - No mgt msgs received 5884
FHPurgeTask Never started 0
EventFramework Program started - No mgt msgs received 5892
EPMServer Program started - No mgt msgs received 5904
FHServer Administrator has shut down this server 0
NOSServer Program started - No mgt msgs received 5580
diskWatcher Running normally 5640
DFMMultiProcLogger Program started - No mgt msgs received 5864
DFMLogServer Program started - No mgt msgs received 4896
DFMCTMStartup Administrator has shut down this server 0
DfmBroker Running normally 6104
DfmServer Running normally 6416
DfmServer1 Running normally 6424
DCRDevicePoll Never started 0
CSRegistryServer Running normally 6432
CSDiscovery Never started 0
AdapterServer1 Program started - No mgt msgs received 6440
AdapterServer Program started - No mgt msgs received 6448
C:\Program Files (x86)\CSCOpx>pdshow DCRServer
Process= DCRServer
State = Failed to run
Pid = 0
RC = -3
Signo = 1073741821
Start = N/A
Stop = 07/02/2012 17:39:06
Core = Not applicable
Info = Application failed or was registered incorrectly.
C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
The Cisco Prime Daemon Manager service is stopping..........................................
The Cisco Prime Daemon Manager service was stopped successfully.
C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
ERROR: [StandardDbUpgrade] : Database cmf is not installed.
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
ERROR: There is no database available to change password.
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
'cmf' is not a valid data source for the product.
Maybe you are looking for
-
SAP Personas - Use of variable in IF statement
Hope someone can assist with this script I am storing a value from a dropdown box in a variable so this can be used latter when I am in a different screen within same script. But the problem I am facing is if i perform a if statment against a variabl
-
Where can I find the Users Manual for the DROID TURBO?
Where can I find the Users Manual for the DROID TURBO?
-
Purchased Ringtones not showing in Sounds folder
I have purchased a couple of ringtones from itunes but they are not showing up in my Settings\Sounds\Ringtone folder. How does a person get them into that folder or have the iphone 4s recognize where they are so access can be gained. Currently they c
-
Hi Experts, We have a requirement to uncheck the Send Notification check box by custom script in supplier's contact account mangement tab while page loading while creating new contact for the supplier. I have attached screen shot for reference. I hav
-
Portal Groups vs. Roles