Cisco spa8000 with a router srp541w how to sety a hunt to 14 lines

The spa8000 allows you to setup a trunk of 1 phone number to hunt to all 8 lines. if you add a srp541w which has 4 lines on it how can you hunt to those other 4 lines so youll have a total of 12 lines on a phone system?
Thanks

It is PBX's job to hunt lines located behind two independent devices connected to it.

Similar Messages

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

How can i fix my wifi connection with my router

how can i fix my wifi connection with my router?

I think I'm having a similar problem, my wifi disconnects when a bluetooth device is connected to the MBA.
I have a MacBook Air (13-inch, Mid 2012) with WiFi and Apple Trackpad. I'm unable to use the trackpad(bluetooth) and wifi at the same time. If I turn off the trackpad then the wifi works fine and if I shutoff the wifi then the trackpad works fine. This configuration was working fine prior to upgrading to Yosemite.
I experienced the same problem at home and at the office.
Additional test:
I turned off the bluetooth trackpad and connected my bluetooth headphones to the MBA. The wifi disconnected as soon as I paired the headphones with the MBA.
I have had no problems with the MBA's keyboard or integrated trackpad.
Rick

DMVPN Configuration with ASA 5510 In Front of Cisco 877-K9 HUB Router

Hi Guys,
I'm in a mess, I have Cisco 877-K9 router which sits behind an ASA 5510 FW.
The Design :
Cisco 877-K9 DSL router (DSL with Static IP) ( DMVPN HUB )
||
ASA 5510 Firewall (Outside INT with Static IP / Inside INT LAN) (PAT & ACL)
||
Switch
||
LAN
Now my problem is, My Dmvpn configuration works just fine, I'm able to ping from my Cisco 877 to any Spoke & vise versa.
I'm also able to Ping from my LAN to any Spoke Tunnel IP, but Im not able to ping any LAN IP at Spoke site nor am I able to ping my LAN from any Spoke site.
I've googled alot but have come at designs where the ASA's are behind the Cisco Routers and not infront.
Any help in this regards is highly appreciated. I really need this to work. Attached are the config files....
Thanks,
Aj.

Thanks to both of you guys for replying. I should've been more descriptive in my initial post, but just thought of getting more ideas.
All the troubleshooting was done before posting the problem, and to clearify the things, Please find below the results.
1) what RProtocol r u using?
a) It's OSPF
2) if ur using OSPF, try show ip route on the hub and spoke to verify the hub/spoke routes are learned via OSPF
a) I did the "show ip route" and bothe the HUB and Spokes get their routes defined
(on the HUB if I used "network 192.9.201.0 255.255.255.0 area 0" I coudln't get routes advertised on spokes)
(I changed to "redistribute static subnests" and I was able to get Hub routes advertised")
3) are your tunnels config correctly? try show crypto ipsec sa
a) They are as they should be and "show crypto ipsec sa" comes up with proper in/out encrypted data
4) on your hub'spoke do a debug ip icmp
a) Did that as well, and If I do a debug on a Spoke and ping from my HUB to that spoke on the tunnel IP, I get proper src/dest results, but If I ping from HUB to Spoke on a client IP behind the Spoke, It pings but does not show any result on the Spoke debug.
I'm able to ping all the Spoke's Tunnel IPs and clients behind the Spokes from the HUB router, but not from either the ASA nor the clients on my LAN.
Additional to the info above, Please also note :
I did notice something that, from my HUB router, which is also my DSL Modem, I'm unable to ping any clients behind the ASA.
So I guess I'm stuck on the point that My Cisco HUB is unable to talk to my LAN, If I can get the HUB to talk to the internal LAN, I would be able to ping clients on LAN from any Spoke or clients behind Spokes.
From HUB router I'm able to ping clients behind Spokes.
Does that give any Ideas ?
Thanks in Advance.
Aj.

Cisco RV320 DUAL WAN router USB setup with Telstra 4G MF823

I am trying to setup Cisco RV320 DUAL WAN router to work with my prepaid Telstra 4G MF823 device. Could you please assist. My settings are as follows: InterfaceUSB2Connection Type:3G/4G PIN Code:Confirm PIN Code:USB Connection Status:3G/4G modem is not available.Access Point Name:telstra.internetDial Number:Username:Password:Enable DNSDNS Server (Required): 8.8.8.8DNS Server (Optional): 8.8.4.4MTU:AutoManualB

Hi oz000,
Unfortunately we don't have anyone here to assist with this particular issue. Our team here provides assistance for the device standalone, we ensure that the 4G device connects to the network and functions correctly on its own.
-Matt W

How to Configuration Cisco 3725 with NEC ASPILA EX

Dear all;
Now i have Cisco 3725 with 1-Port Channelized E1/T1/ISDN-PRI, i am connect to NEC ASPILA EX with PRI I/F (1PRIU-A1.
The controller link state up, but when clients dialin to RAS not have ring back or not connect to RAS.
anyone can help me?

Hi;
i'am config cisco as you recommended is "isdn protocol-emulate network" and "clock source should be internal". After the remote computer call to RAS it have modem signal and then connected, next time it disconnect. can i change some parameter for this problem or what i'am wrong?. I post config, status, and debug message for you. Help me..
===== show isdn status ===========
#show isdn status
Global ISDN Switchtype = primary-net5
ISDN Serial2/0:15 interface
******* Network side configuration *******
dsl 0, interface ISDN Switchtype = primary-net5
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0xFFFF7FFF
Number of L2 Discards = 0, L2 Session ID = 0
Total Allocated ISDN CCBs = 0
=============== sh controllers e1 2/0 brief ========
#sh controllers e1 2/0 brief
E1 2/0 is up.
Applique type is Channelized E1 - unbalanced
No alarms detected.
alarm-trigger is not set
Framing is CRC4, Line Code is HDB3, Clock Source is Internal.
Module type is Channelized E1/T1 PRI
Version info Firmware: 0000001D, FPGA: 0
Hardware revision is 0.0 , Software revision is 29
Protocol revision is 1
number of CLI resets is 0
receive remote alarm : 0,
transmit remote alarm : 0,
receive AIS alarm : 0,
transmit AIS alarm : 0,
loss of frame : 1,
loss of signal : 1,
Loopback test : 0,
transmit AIS in TS 16 : 0,
receive LOMF alarm : 0,
transmit LOMF alarm : 0,
========== Interface config.=============
controller E1 2/0
clock source internal
line-termination 75-ohm
pri-group timeslots 1-31
interface Serial2/0:15
no ip address
ip nat inside
encapsulation ppp
ip policy route-map nachi-worm
dialer rotary-group 1
dialer-group 1
isdn switch-type primary-net5
isdn protocol-emulate network
isdn incoming-voice modem
no fair-queue
no cdp enable
=================Debug Message when call to RAS ===========================
Mar 6 22:40:29 BANGKOK: ISDN Se2/0:15 Q931: RX <- SETUP pd = 8 callref = 0x000B
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9838B
Exclusive, Channel 11
Calling Party Number i = 0x0081, N/A
Plan:Unknown, Type:Unknown
Called Party Number i = 0x81, '075205600'
Plan:ISDN, Type:Unknown
Low Layer Compat i = 0x8090A3
High Layer Compat i = 0x9181
Mar 6 22:40:29 BANGKOK: ISDN Se2/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0x800B
Channel ID i = 0xA9838B
Exclusive, Channel 11
Mar 6 22:40:29 BANGKOK: ISDN Se2/0:15 Q931: TX -> ALERTING pd = 8 callref = 0x800B
Mar 6 22:40:29 BANGKOK: ISDN Se2/0:15 Q931: TX -> CONNECT pd = 8 callref = 0x800B
Mar 6 22:40:35 BANGKOK: %ISDN-6-CONNECT: Interface Serial2/0:10 is now connected to unknown unknown
Mar 6 22:40:46 BANGKOK: %ISDN-6-DISCONNECT: Interface Serial2/0:10 disconnected from unknown , call lasted 17 seconds
Mar 6 22:40:46 BANGKOK: ISDN Se2/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x800B
Cause i = 0x8290 - Normal call clearing
Mar 6 22:40:47 BANGKOK: ISDN Se2/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x000B
Mar 6 22:40:47 BANGKOK: ISDN Se2/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x800B
==============================================

Cisco or Linksys DSL router that will work with Windows XP Pro?

Any suggestions for a CISCO or LINKSYS DSL router to replace a Zyxel (Century Link) PK5001Z? System is Windows XP Pro, 20 wireless and wired devices connected (including 6 CISCO WVC210 IP cameras ). The Zyxel forwards as many ports as I want, but will only open a limited number of the ports. This limits my access thru the internet (local network sees all cameras). Zyxel support is unable to help.

Hi Edward, if you're looking for a modem/router combo device, Cisco offers the SRP500 series. However this product is EOS/EOL. The small business product line does not have any other DSL termination router aside the SRP series. If your goal is to use a DSL modem and then have a router, you may want to consider RV325 router as it is very feature rich and quite robust.
-Tom
Please mark answered for helpful posts

How to highlighting cisco sintax with notepad++

hello everyon
I tried to highlight the cisco sintax with this help:
http://www.linickx.com/875/cisco-asa-syntax-highlighting-with-notepad
But it doesn't work, someone has another option?
Thanks.

Hi Vikrant,
Hoping you are doing well.
Firstly thank you fo contacting Cisco Support Community. Below is a brief sumamry on the query:
The Cisco Jabber for Android is designed in order to work with Cisco Call manager and Cisco Unity Connection.
CIsco Jabber for Andoid includes following limitations and restrictions. Below is the resource link:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cumc/cisco_jabber/Android/86/Cisco_Jabber_Android_8.6.x_Admin_Guide.html#wp808617
As per the above link:
Telephone integration with call manager versions 6.1.5, 7.1.5, 8.0.3, 8.5, and 8.6 ONLY
Hope the above was informative. Please let me know if you have any further queries and we will be more than happy in assisting further on the same.
Thanks and Regards
Prashanthi Velpula

Web filtering on Cisco 867 VAE K9 router

Hi,
how do I enable web filtering on Cisco 867 VAE K9 router with 15.1(4)M4 release? i have a message on the router : Content Filter unvailable ....
thanks.

Anthony,
Yes it does https inspection and the portal also block based on categories (Social Networking, Gamblin; to tell a few samples), IP address and domain name.
Get in touch with your Cisco Account Team or Cisco Partner/Reseller and get an evalution.
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"
http://www.cisco.com/web/partners/tools/pdihd.html

Urgent!!! Cisco ACE and asymetric routing assistance needed

I am wondering if someone can give me pointers on the cisco ACE
and asymetric routes. I've attached the diagram:
-Cisco IOS IP address is 192.168.15.4/24 and 4.1.1.4/24
-Firewall External interface is 192.168.15.1/24,
-Firewall Internal interface is 192.168.192.1/24,
-F5_BigIP External interface is 192.168.192.4/24,
-F5_BigIP Internal interface is 192.168.196.1/24 and 192.168.197.1/24,
-host_y has IP addresses of 192.168.196.10/24 and 192.168.197.10/24,
-Checkpoint has static route for 192.168.196.0/24 and 192.168.197.0/24
pointing to the F5_BigIP,
-host_y is dual-home to both VLAN_A and VLAN_B with the default
gateway on host_y pointing to VLAN_A which is 192.168.196.1,
-host_x CAN ssh/telnet/http/https to both of host_y IP addresses
of 192.168.196.10 and 192.168.197.10.
In other words, from host_x, when I try to connect to host_y
via IP address of 192.168.197.10, the traffics will go through VLAN_B
but the return traffics will go through VLAN_A. Everything
is working perfectly for me so far.
Now customer just replaces the F5_BigIP with Cisco ACE. Now,
I could not get it to work with Asymetric route with Cisco ACE. In
other words, from host_x, I can no longer ssh or telnet to host_y
via IP address of 192.168.197.10.
Anyone knows how to get asymetric route to work on Cisco ACE?
Thanks in advance.

That won't work because ACE uses the vlan id to distinguish between flows.
So when the response comes back on a different vlan, ACE can't find the flow it belongs to and it drops it.
Even if we could force it to accept the packet, ACE would then try to create a new flow for this packet and it will collide with the flow already existing on the frontend.
You would need to force your host to respond on the same vlan the traffic came in.
This could be done with client nat on ACE using different nat pool.
Gilles.

Cisco 1721.... How do I set this up?

Greetings,
New here. Please bear with me, I have been in computers as a career for 8 years, but I am new to cisco routers.
I am trying to configure this router. It is a 1721 with a wic t1-dsu card in it. What I would like to do is use the sdm to configure this thing, but I cannot get it to work. What do I need? I have it connected right now with the blue cable (serial on one end), and when I boot up the router and have hyper terminal up and connected, it goes through the boot process fine. I just have no understanding of the command line structure. Hence me trying to use the sdm.
Is there a default ip address that I can use with the sdm? How do you reset the router back to the defaults?
I have just taken over a network that the old network administrator walked out on. No documentation, nothing. So I am playing catch up. This router was sitting on the shelf, he said (before he left) that he was going to put this one on the network and replace the 1720 router that is in place now.
I am trying to learn this one so if the other one goes down, I have a spare to throw in place.
If anyone can help me out, I would greatly appreciate it.
Thanks in advance.

to get the router to its default (factory) configuration use the resetting router technique described in the following link:
http://www.cisco.com/en/US/products/hw/routers/ps221/products_installation_guide_chapter09186a008007e57a.html#wp1022265
more 1721 links:
Overview -
http://www.cisco.com/en/US/products/hw/routers/ps221/products_installation_guide_chapter09186a008007e5b3.html
Configuration Guides -
http://www.cisco.com/en/US/products/hw/routers/ps221/products_installation_and_configuration_guides_list.html
Troubleshooting -
http://www.cisco.com/en/US/products/hw/routers/ps221/products_installation_guide_chapter09186a008007e57a.html
(this technique will assist you in setting the router to a state where you can access the command line to update any IP or config)
if you need configuration help, please state what you want the router to do and the topology it is to be placed into and we can provide configuration examples you can use.

Cisco 1941W - with external antenna cable

Hello guys!
I would like to ask, maybe you know or maybe you have tried to use these cables from Cisco :
Feature AIR-CAB020LL-R AIR-CAB050LL-R AIR-CAB100ULL-R AIR-CAB150ULL-R
Cable Length
20 ft (6 m)
50 ft (15 m)
100 ft (30 m)
150 ft (46 m)
Transmission Loss
1.3 dB
3.4 dB
4.4 dB
6.6 dB
for Cisco 1941W router with external antennas?

How far are you trying to extend the antennas? Those will work to reduce the attenuation if trying to extend the placement of the antennas. Basically they are LMR cables.
Sent from Cisco Technical Support iPhone App

Cisco 1700 with MP-BGP and VRF support

I have a Cisco 1721 with MP-BGP Support, you can create VRFs with it and every other MPLSVPN feature, but the commands for MPLS switching are not supported like Router(config-if)mpls ip , I read in some forums that you can create MPLS VPN without enabling MPLS at all, just with MPBGP, but I couldn't do it myself, Can someone tell me how to make it work or what can I do with a Cisco 1721 that supports MP-BGP?
thanks in advance

Here is an example. Take care about overhead for packets like VoIP. The overhead is 88 bytes.
The packet semms something like that.
IpHeader-pub@ - NAT-Tudp4500 - ESP - IpHeader-priv@(vrf discriminator) - GRE - Original IP Header - Data - Esp Trailer.
In this case you neet tunnel-mode because you use
private @ in order to determine vrf (vrf discriminator).
This is a LAB config, all other security parameters you need on a router are not configured. If you add access-list on the external interface of REMOTE you have to understand every encapsulation step in order to well tune it.
Good reading.
The PPT draw shows physically and logically views.
PS, take care about fragmentation issues, the problematic is still not well managed by the routers, I could not made Tunnel-path-mtu discovery work with vrf's. The workaround is to fragment packets. It's not good for performance but actually there is no other solution concerning that.
Kind Regards
Miguel

Debug IP Policy on Cisco 4451-X ISR Router

Cisco 4451-X ISR router is running IOS XE Software version 03.13.00.S. I am trying to run the command "debug ip policy" on the router to verify if the traffics are policy-routed correctly, but I get no output displayed on the router for the debug command. I am connected via a console cable and the logging console is enabled. How do I get the debug outputs to display on the router for monitoring? Thanks.

Actually, you can use a TFTP server...
First of all, create a text file using a text editor (call it 'dhcpstatic', for instance) with the following contents (don't include the dashes):
*time* Jan 21 2005 03:52 PM
*version* 1
!IP address Type Hardware address Lease expiration
172.16.12.100 /24 1 0011.4342.e9a5 Infinite
Then do the following:
no service dhcp
ip dhcp pool pool1
network 172.16.12.0 255.255.255.0
domain-name xxxdomain.com
dns-server 172.16.12.20 172.16.12.21
netbios-name-server x.x.x.x
default-router 172.16.12.1
lease 0 12
origin file tftp:///dhcpstatic
Then do a 'service dhcp'...
Once you have this working, we can do a further optimisation by storing the file on your switch so that you don't need to use a TFTP server...
Hope that helps - pls rate the post if it does.
Paresh

Cisco spa8000 with a router srp541w how to sety a hunt to 14 lines

Similar Messages

Maybe you are looking for