Cisco USB Driver for Microsoft Windows 7 PC?

Hello All,
I want a USB Driver for the USB Console cable which came up with Cisco Router.
Note that this USB Console cable has both the sides USB ports ( 1 side of the port goes to USB Console Port of Router and other side goes to USB port of your Laptop)
I searched on cisco.com.
Found the below link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6880_x/hardware/installation/guide/b_c6880-X_hig/b_c6880-X_hig_appendix_01001.pdf
However, when I go to download link, it appears as "Page Not Found"
I want to try this option and connect my Laptop's HyperTerminal to Router's USB Console.
Does anyone know the USB driver for this?
Thanks
Chinar

Hi Chinar-
It looks like this will work with Windows 7.
http://software.cisco.com/download/release.html?mdfid=282867574&softwareid=282855122&release=3.1
DJ

Similar Messages

Could not download this driver: IDT High-Definition Audio CODEC Driver for Microsoft Windows 7.

Tried to download this driver: IDT High-Definition Audio CODEC Driver for Microsoft Windows 7.
It would not download - said it was not compatble with my operating system.
I run Windows 7, 64 bit.
I'm trying to increse the sound volume from the monitor.
I have increased the sound to 100 from the monitor and in Windows . It is still barely audible. . .

Hello again valens-mom,
Thank you for responding to my post requesting additional information. I can tell you that according to Product Specifications page for your HP Pavilion w2338h is a 23-inch wide-screen HDMI monitor, your monitor has 2 watts oer speaker integrated speakers. A pair of reasonably sensitive speakers deliver the following decibel levels at a distance of about one meter.
Power/ Decibels
2 Watts = 93 decibels
4 Watts = 96 decibels
8 Watts = 99 decibels
16 Watts = 102 decibels
32 Watts = 105 decibels
64 Watts = 108 decibels
128 Watts = 111 decibels
256 Watts = 114 decibels
512 Watts= 117 decibels
1024 Watts = 120 decibels
For Comparison
10db = normal human breathing
60db = normal human conversation
110db = power saw, car horn, shouting in ear,
120db = jet aircraft close by, emergency vehicle siren, rock concert
Now as to whether installing the IDT High-Definition Audio CODEC Driver for Microsoft Windows 7 will give you the audio level you are seeking will depend on what computer you have and what audio drivers are installed. To provide you with more accurate information I would need to know additional information concerning your computer. Is this an HP computer? If it is not the driver question would be better answered by the computer manufacturer. If this is an HP computer could you please provide the product number for it so I can take a look into what drivers work on that computer?
How Do I Find My Model Number or Product Number?
Please if you require additional help in this re-post with the requested information and I would be happy to provide you with further assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Simple Question - Cisco Unified CallConnector for Microsoft Windows

Can anyone tell me if Unified Call Connector works with UCM or just Express? This is something we would be interested in if it could work with our current setup.
Will rate Post.
Thanks.

Hi!
No, it does not work with CUCM, it works with express only. Please refer to the data sheet below:
"Cisco Unified CallConnector for Microsoft Windows, especially designed for the small and medium-sized business (SMB) or branch-office user, is supported by Cisco Unified Communications Manager Express 4.0 and later."
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7046/ps7274/ps7067/product_data_sheet0900aecd8053c8ad.html
Hope this helps!
Regards,
Teresa.
If it helps, please rate :)

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

HT201269 how to download apple usb driver for windows 7 32 bit

how to download apple usb driver for windows 7 32 bit

Try this:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Then install this:
http://support.apple.com/kb/dl1614
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or 32-bit editions of Windows 7, and Windows 8

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

Windows-XP-side USB driver for AT 700?

Mine in the original Japanese model, recently upgraded to Android 4. I think this is the same device as the AT 200 (for Europe) and Excite X10 for North America.
There are many times when I wish I could do a data connection directly to a Windows PC, but this does not appear to be possible. After a bunch of munging about, I think a USB driver on the Windows side is probably one of the keys, but I haven't been able to find one from any source that I trust. If Toshiba has it on any of their websites, they are hiding it well.
Bluetooth might be an alternative, but it does not appear to work. The appropriate Bluetooth PAN network device appears to be present when Bluetooth is active, but it appears to be disabled. And how.

The drivers here have been used on many XP installs:
http://www.fastfs.com/help_pages/hp%20downgrade.htm
This is good for graphics:
http://cid-3f10d7c1771f7efe.office.live.com/self.aspx/Public/Nvidia%20Laptop%20Graphics-XP%5E_15655....
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Where can i download a usb driver for my revere 3 (model

I have been trying to download a usb driver for my new revere 3 so I can connect with my 8.1 windows laptop. anyone have an idea where I can find it? The LG site doesn't list any drivers for it

Mac 101: Printing (OS X Lion)
Important:
Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
The procedures are identical for Mountain Lion.

Musicord Cherub MRD-41 Recorder: USB-Driver for Mac

Hello,
I am searching for the USB-Driver for Musicord Cherub MRD-41 Recorder. Searching for it along the internet did not give any matching result.
Originally a CD containing the USB-Driver for Windows was included with the product. Since we now work with Apple-Products this does no longer work. Connecting the device to a Mac (as it is normal these days) and hoping, that it will work without any additional Software does not give any result.
On the Original-CD the manufacturer states, that the USB-Driver for Mac can be downloaded at www.apple.com but there nothing can be found anymore.
The recorder has been bought about 6 years ago (used under Windows then). Now we would like to use it again under Mac-systems (10.6 and 10.7).
Does anyone know, if, and where help can be found?
Thank you very much

If it uses MIDI, Garageband can often read it.

Mac Pro - Reads USB Drive only in Windows

For the past couple weeks I have been sharing 'Word' documents on a USB drive using both Windows and Mac OS platforms. A couple days ago the Mac side of the computer stopped recognizing the USB drive. It does even show the drive on the desktop. I tried putting the drive in the other USP port. This didn't help. When I turn on the Windows side, using XP, the drive works fine.
Am I doing something wrong? Can I use the same USB drive to share files? Or, do I need try another way to share files between platforms?
If this doesn't work, I was thinking of putting my files on Google Documents and accessing almost everything via the Internet.

I recently had the reverse happen to me. I had a FAT formatted flash drive that I would frequently put into a device that needed non-Mac. I also used to use it a lot with Windows - Mac transfers. Plugged it into a Windows computer and it said it needed formatting. The only think I can think of is occasionally something gets written to the drive in a form that the other system can't handle. I'd copy off any files that are valuable then reformat the drive to FAT and see if it then works.

Applications 11i Release 10 CD/Media Pack for Microsoft Windows

Could some one give me the minimum system configuration to load Oracle Applications 11i Release 10 CD/Media Pack for Microsoft Windows for personal use ?
I want to buy this CDS from Oracle Store .
Thanks
Naveen

You need to apply 11.5.10 Oracle E-Business Suite Consolidated Update 2 (CU2)
- Apply patch 4318672 -- 11.5.10.2 Technology Stack Validation Patch
- Apply AD patch 4229931 -- The most recent replacement for this patch is 4502904
- Apply patch 4297568 on the concurrent processing server node
- Apply the CU2 driver (u3460000.drv)
Metalink Note: 316366.1 should be helpful

Is it possible to have two USB drives for the IPad? I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive. One of my cameras does not use an SD card. How can I do this?

Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

Can I use a time capsule as a usb drive on a windows 7 machine?

Can I use a time capsule as a usb drive on a windows 7 machine?

No, but you can use it as an Ethernet or wireless drive.
(60698)

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

iTunes only syncs to Apple devices.
Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

Cisco USB Driver for Microsoft Windows 7 PC?

Similar Messages

Maybe you are looking for