Cisco VSM 7.5 and SLES 11 SP2

Is it possible for Cisco VSM 7.5 to be installed on a server running SLES 11 SP2? All documentation and even software download lead me to believe no, but I wanted a second knowing.

It may technically function, but I haven't tried it myself.
Also, I can all but assure you it wouldn't be supported by Cisco TAC.

Similar Messages

Unable to monitor SLES 10 SP4,SLES 11 SP3 and SLES 11 SP2 via SCOM 2012 R2

Hi ,
I am unable to get SLES 10 SP4, SLES 11 SP3 and SLES 11 SP2 under SCOM 2012 R2 monitoring. The PAM ,glibc and openssl are at the right versions.
Per the documentation SCOM MP for unix/Linux provides monitoring of SUSE Linux Enterprise
Server 9, SUSE Linux Enterprise Server 10 SP1, and SUSE Linux Enterprise Server 11 operating systems. Does this mean it cannot monitor SP2, SP3 and SP4 for the same Operating systems?
Plat form not supported is the error which I get.
Thank you much,

There should not be any problems with monitoring SLES 10 SP4 or SLES 11 SP2/SP3. If you are getting a "platform not supported" error, it may be that the right management packs have not successfully imported. Can you give more details on when
you get the error, and the management pack versions that you have installed? And what Update Rollup (UR) for OpsMgr do you have installed? The latest is UR4, and the Linux/UNIX management packs for UR4 are here:
http://www.microsoft.com/en-hk/download/details.aspx?id=29696 . Be sure to download the version for "R2".
Michael Kelley, Lead Program Manager, Open Source Technology Center

FLEXCUBE 12.0.3 and SLES 11 SP2/SP3

Hello,
Does anybody knows if there are some issues when running FLEXCUBE 12.0.3.0.0 on Linux SLES 11 SP2/SP3 with kernel 3.0.x
There is nothing mentioned in the pre-requisites about kernel version.
https://docs.oracle.com/cd/E53392_01/PDF/Installation/OraclerFLEXCUBE_FCIS_Pre-requisites.pdf
Thank you.

There should not be any problems with monitoring SLES 10 SP4 or SLES 11 SP2/SP3. If you are getting a "platform not supported" error, it may be that the right management packs have not successfully imported. Can you give more details on when
you get the error, and the management pack versions that you have installed? And what Update Rollup (UR) for OpsMgr do you have installed? The latest is UR4, and the Linux/UNIX management packs for UR4 are here:
http://www.microsoft.com/en-hk/download/details.aspx?id=29696 . Be sure to download the version for "R2".
Michael Kelley, Lead Program Manager, Open Source Technology Center

Vibe and SLES 11 SP3?

Is anyone using vibe 3.4 on SLES 11 SP3 and know if it is a supported platform? We are currently running vibe 3.4 on SLES 11 SP2 and are looking to upgrade the O/S. The documentation says the latest support pack, but I'm not sure if vibe 3.4 or sp3 for SLES came out first?
Thank you for your help.
Tom

TSchmauch,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

CJS-30022 ECC6.0 SR3 installation error on SLES 10 SP2 DB2 9.5 64 bit

same post on linux forum:
error in ECC.ERP
Hello
I'm stuck with installation on newly build machine Intel Xeon and 5 GB RAM.
System SLES 10 SP2 and all patches applied. IBM Java 142 v 10 (latest from OSS note for x86_64) but tried also with SLES provided sun java (same error).
All steps from 958253 has been applied, 1125951 suggest installeion of "pdksh" shell but that is not available in SLES - ksh is installed, saplocales version 3 also.
sapinst.log
INFO 2008-06-25 10:14:13.955
Creating file /db2/IED/sapdata3/sapinstdir1/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/import_monitor.java.log.
INFO 2008-06-25 10:14:13.985
Output of /opt/IBMJava2-amd64-142/jre/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2008-06-25 10:14:14.177
Execution of the command "/opt/IBMJava2-amd64-142/jre/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 1. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor
WARNING[E] 2008-06-25 10:14:14.181
CJS-30022 Program 'Migration Monitor' exits with error code 1. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-06-25 10:14:14.279
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
import_monitor.java.log
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor
there is no import_monitor.log available.
I'm using ECC 6.0 SR3 fresh downloaded instalallation disks and DB6 9.5 from SAP service.sap.com.

Finally i've resolved this problem. You can't use /db2/SID/sapdata(n) directory as a your sapinst installation directory becouse sapinst is setting strange access rights to whole /db2/SID tree and sidadm user can't do any activity below.
It's my first SAP DB6 based instalallation (i've done dozen of times on Oracle and there it was possible) and this is new for me.
Note 967123 is describing this problem "ABAP: Error in step extractMigrationMonitorArchive
The installation aborts in step extractMigrationMonitorArchive.
Solution:
Download a patch of MIGMON.SAR from the SAP service marketplace
(for more information see SAP note 784118) and extract the archive as
user <sapsid>adm into the current installation directory
(using SAPCAR with the option '-xvf')
Then restart SAPinst or re-execute the step."
And it looks that user sidadm is unpacking MIGMON.SAR.
Thanks for hints.

Upgrade SLES SuSE9 SP4 - SLES SuSE10 SP2

Hello SAP on Linux forum,
We must upgrade our MaxDB SAP System Landscape Servers (> 100 servers) running on Novell SLES SuSE9 SP4 to Novell SLES SuSE10 SP2.
We want to upgrade with minimal manual intervention.
I've read the SAP notes: 958253 and 1275776 and also the Novell SUSE Linux Enterprise
Server Installation and Administration Guide May 2008
Does anyone has some hint and tips how to upgrade our large environment? Are there some lessons learned? Tools which support an automatic upgrade?
Please advise.
Best Regards,
Mike Laanen

Hello Hannes,
Thank you for your reply, we allready asked Novell, see the following correspondention:
"In doing some research the officially supported methods of upgrading from SLES 9 SP2 to SP3 are to use YOU (YaST updates) and by using the CD/DVD. Novell does offer a new update tool SMT (Subscription Management Tool) but it is more geared to replace a YOU server than an automated upgrade like you are looking for. In my research I couldn't find a tool that would perform the task you are wanting. Autoyast looked promising but in speaking with some of the autoyast engineers their initial optimism faded as potential problems came to light.
Because autoyast was build to perform installs getting it to change and do upgrades is questionable. We are unsure how autoyast will react to software conflicts, how it may handle trying to upgrade partitions with data already on them, etc. The potential for problems with autoyast are high which may leave you with a down server in an unrecoverable state. We haven't tested autoyast in these conditions so the unknowns are many. Using autoyast in this way is not supported.
Most of the engineers I spoke with recommended creating a SP 3 install source. Then boot the server up off of the SP 3 media and point it to the SP 3 install source and select the upgrade option. This does require some manual steps but will be faster than swapping media in and out of the CD.
Best of luck,
Brian King
ASE Advantage - OS"
So unfortunately NO support from Novell to perform an automatic upgrade of our systemlandscape (> 100 servers).
Best Regards,
Mike Laanen
Sr. Architect Technische Infrastructuur SAP

CJS-30022 ECC6.0 installation error on SLES 10 SP2 DB2 9.5 64 bit

Hello
I'm stuck with installation on newly build machine Intel Xeon and 5 GB RAM.
System SLES 10 SP2 and all patches applied. IBM Java 142 v 10 (latest from OSS note for x86_64) but tried also with SLES provided sun java (same error).
All steps from 958253 has been applied, 1125951 suggest installeion of "pdksh" shell but that is not available in SLES - ksh is installed, saplocales version 3 also.
sapinst.log
INFO 2008-06-25 10:14:13.955
Creating file /db2/IED/sapdata3/sapinstdir1/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/import_monitor.java.log.
INFO 2008-06-25 10:14:13.985
Output of /opt/IBMJava2-amd64-142/jre/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2008-06-25 10:14:14.177
Execution of the command "/opt/IBMJava2-amd64-142/jre/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 1. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor
WARNING[E] 2008-06-25 10:14:14.181
CJS-30022 Program 'Migration Monitor' exits with error code 1. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-06-25 10:14:14.279
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|
NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
import_monitor.java.log
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
there is no import_monitor.log available.
The java class is not found: com.sap.inst.migmon.imp.ImportMonitor

Finally i've resolved this problem. You can't use /db2/SID/sapdata(n) directory as a your sapinst installation directory becouse sapinst is setting strange access rights to whole /db2/SID tree and sidadm user can't do any activity below.
It's my first SAP DB6 based instalallation (i've done dozen of times on Oracle and there it was possible) and this is new for me.
Note 967123 is describing this problem "ABAP: Error in step extractMigrationMonitorArchive
The installation aborts in step extractMigrationMonitorArchive.
Solution:
Download a patch of MIGMON.SAR from the SAP service marketplace
(for more information see SAP note 784118) and extract the archive as
user <sapsid>adm into the current installation directory
(using SAPCAR with the option '-xvf')
Then restart SAPinst or re-execute the step."
And it looks that user sidadm is unpacking MIGMON.SAR.
Thanks for hints.

Installing OES 11 on SLES 11 SP2

We originally setup a GroupWise 2012 server on SLES 11 SP2 server without OES 11, thinking we would be able to use SAMBA as our File server later. Our computer consultant convinced us to go the OES route so we now have a SLES11 SP1 / OES 11 server and a SLES 11 SP2 / GroupWise 2012 server.
How hard is it to install OES 11 on the SLES 11 SP2 server with GroupWise 2012?
What steps would I need to take to get this done?
Thanks,
Ken

Thanks for the reply. I was thinking that would be what was needing to be done from reading how OES and SLES work together.
Thanks again,
Ken
Originally Posted by smflood
"KBOYLE" wrote:
> While OES is an add-on to SLES, the documentation specifies it should
> be installed in conjunction with SLES and only with the default SLES
> components installed. There is no guarantee that an update to your
> current server would be successful.
Success is more likely if the SLES install has not been patched which
considering SLES11 SP2 has been out for a while (and now superseded by
SLES11 SP3) would seem unlikely.
> Your new OES11 server is a bit out of date too: the current version is
> OES11-SP1/SLES11-SP2. Very shortly OES11-SP2 will be available and will
> run on SLES11-SP3. You should ensure you are using the latest version.
Note by "shortly" Kevin means months not weeks.
HTH.
Simon
Novell Knowledge Partner

Single Inbox on Unity Connection 8.5 and Exchange 2003 SP2

Hi,
We have Unity Connection 8.5 (with SU2) and Exchange 2003 SP2
We want to setup the Single Inbox feature that works well with Exchange 2007 and 2010, but my customer is running Exchange 2003 SP2.
We met all of the requirements outlined in: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp459928
I configure a new "Unified Messaging Services" profile for Exchange using Exchange 2003 and enabled for Single Inbox. When I run "Test" it displays the following errors (other validation is successfully)
The service port for IMAP is not functioning.
The system failed to connect to the server with a socket connection through port beatles.clubone.com:993. The error is error:0200206F:system library:connect:Connection refused. Refer to the tomcat log file for more details. If you are using secure connection, confirm that SSL is enabled on the server.
Why is it trying to connect using IMAP, that wasn't the case when I used for Exchange 2007 or 2010 when IMAP was not enabled.
Is there something else I'm missing for configuration with Unity Connection to support Single Inbox with Exchange 2003 SP2?
Thank you!
-rya

Hi Rya,
I just wanted to add my +5 vote for this great catch by Aaron (nice work "A")
If you are going to upgrade to Unity Connection 8.6
Check out this great doc from Saurabh for the refresh upgrade notes to 8.6.
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/unified-comm-application/blog/2011/08/11/checklist-before-upgrading-to-unity-connection-86
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor

I'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Ask the Expert: Cisco Nexus 2000, 5000, and 6000 Series Switches

with Cisco Expert Vinayak Sudame
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions how to configure and troubleshoot the Cisco Nexus 2000, 5000 and 6000 Series Switches with Cisco subject matter expert Vinayak Sudame. You can ask any question on configuration, troubleshooting, features, design and Fiber Channel over Ethernet (FCoE).
Vinayak Sudame is a Technical Lead in Data Center Switching Support Team within Cisco's Technical Services in RTP, North Carolina. His current responsibilities include but are not limited to Troubleshooting Technical support problems and Escalations in the areas of Nexus 5000, Nexus 2000, FCoE. Vinayak is also involved in developing technical content for Cisco Internal as well as external. eg, Nexus 5000 Troubleshooting Guide (CCO), Nexus 5000 portal (partners), etc. This involves cross team collaboration and working with multiple different teams within Cisco. Vinayak has also contributed to training account teams and partners in CAE (Customer Assurance Engineering) bootcamp dealing with Nexus 5000 technologies. In the past, Vinayak's responsibilities included supporting MDS platform (Fiber Channel Technologies) and work with EMC support on Escalated MDS cases. Vinayak was the Subject Matter Expert for Santap Technologies before moving to Nexus 5000 support. Vinayak holds a Masters in Electrical Engineering with Specialization in Networking from Wichita State University, Kansas. He also holds Cisco Certification CCIE (#20672) in Routing and Switching.
Remember to use the rating system to let Vinayak know if you have received an adequate response.
Vinayak might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community, Other Data Center Topics discussion forum shortly after the event.
This event last through Friday July 12, 2013. Visit the community often to view responses to youe questions of other community members.

Hi Vinayak,
Output of "show cfs internal ethernet-peer database"
Switch 1
ETH Fabric
Switch WWN logical-if_index
20:00:54:7f:ee:b7:c2:80 [Local]
20:00:54:7f:ee:b6:3f:80 16000005
Total number of entries = 2
Switch 2
ETH Fabric
Switch WWN logical-if_index
20:00:54:7f:ee:b6:3f:80 [Local]
20:00:54:7f:ee:b7:c2:80 16000005
Total number of entries = 2
Output of "show system internal csm info trace"
Switch 1 in which "show cfs peers" show proper output
Mon Jul 1 05:46:19.145339 (CSM_T) csm_sp_buf_cmd_tbl_expand_range(8604): No range command in buf_cmd_tbl.
Mon Jul 1 05:46:19.145280 (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
Mon Jul 1 05:46:19.145188 (CSM_T) csm_sp_handle_local_verify_commit(4291):
Mon Jul 1 05:46:19.145131 csm_continue_verify_ac[597]: peer is not reachable over CFS so continuing with local verify/commit
Mon Jul 1 05:46:19.145071 csm_tl_lock(766): Peer information not found for IP address: '172.16.1.54'
Mon Jul 1 05:46:19.145011 csm_tl_lock(737):
Mon Jul 1 05:46:19.144955 (CSM_EV) csm_sp_build_tl_lock_req_n_send(941): sending lock-request for CONF_SYNC_TL_SESSION_TYPE_VERIFY subtype 0 to Peer ip = (172.16.1.54)
Mon Jul 1 05:46:19.143819 (CSM_T) csm_copy_image_and_internal_versions(788): sw_img_ver: 5.2(1)N1(2a), int_rev: 1
Mon Jul 1 05:46:19.143761 (CSM_T) csm_sp_get_peer_sync_rev(329): found the peer with address=172.16.1.54 and sync_rev=78
Mon Jul 1 05:46:19.143699 (CSM_T) csm_sp_get_peer_sync_rev(315):
Mon Jul 1 05:46:19.143641 (CSM_EV) csm_sp_build_tl_lock_req_n_send(838): Entered fn
Mon Jul 1 05:46:19.143582 (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
Switch 2 in which "show cfs peers" does not show proper output
Mon Jul 1 06:13:11.885354 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 77 seq 482
Mon Jul 1 06:13:11.884992 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 357 seq 369
Mon Jul 1 06:13:11.884932 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 357 seq 368
Mon Jul 1 06:13:11.884872 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 357 seq 367
Mon Jul 1 06:13:11.884811 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 357 seq 366
Mon Jul 1 06:13:11.884750 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 352 seq 365
Mon Jul 1 06:13:11.884690 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 352 seq 364
Mon Jul 1 06:13:11.884630 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 352 seq 363
Mon Jul 1 06:13:11.884568 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 352 seq 362
Mon Jul 1 06:13:11.884207 (CSM_EV) csm_sp_acfg_gen_handler(3011): Preparing config into /tmp/csm_sp_acfg_1733916569.txt
Mon Jul 1 06:13:11.878695 csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
Mon Jul 1 06:13:11.878638 (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
Mon Jul 1 06:12:29.527840 (CSM_T) csm_pss_del_seq_tbl(1989): Freeing seq tbl data
Mon Jul 1 06:12:29.513255 (CSM_T) csm_sp_acfg_gen_handler(3106): Done acfg file write
Mon Jul 1 06:12:29.513179 (CSM_EV) csm_sp_acfg_gen_handler(3011): Preparing config into /tmp/csm_sp_acfg_1733911262.txt
Mon Jul 1 06:12:29.508859 csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
Mon Jul 1 06:12:29.508803 (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
Mon Jul 1 05:53:17.651236 Collecting peer info
Mon Jul 1 05:53:17.651181 Failed to get the argumentvalue for 'ip-address'
Mon Jul 1 05:40:59.262736 DB Unlocked Successfully
Mon Jul 1 05:40:59.262654 Unlocking DB, Lock Owner Details:Client:1 ID:1
Mon Jul 1 05:40:59.262570 (CSM_T) csm_sp_del_buf_cmd(1713): Deleting comand with Id = 1
Mon Jul 1 05:40:59.262513 DB Lock Successful by Client:1 ID:1
Mon Jul 1 05:40:59.262435 Recieved lock request by Client:1 ID:1
Mon Jul 1 05:40:41.741224 ssnmgr_ssn_handle_create_get: Session FSM already present, ID:1
Mon Jul 1 05:40:41.741167 ssnmgr_handle_mgmt_request: Create/Get request received for session[process_n5kprof]
show cfs lock gives no output.
Just to further clarify, we have 4 5548UP switches in the same management vlan. 2 switches are in one location lets say location A and they are CFS peers and are working fine.
These two switches which are having problem are in location B. All the switches are in the same vlan. Essentially the all CFS multicast messages will be seen by all 5548 switches as they are in the same vlan. I am assuming that this might not create any problems as we specify the peers in the respective configurations. Or do we have to change the CFSoIPv4 multicast addresses in location B or may be configure a different region.
Regards.

Vsm-adf.jar and vsm-bc4j.jar are same ??

I donwloaded the sample code for Vsm-adf.jar and vsm-bc4j.jar . But both looks similar.
Anybody got any clue
Please let me know

hi
The VSM application has been migrated from the earlier version of JDeveloper. This is made to work with the latest JDev 10g. It uses the adf libraries which are shipped along with JDev10g.
Shrini

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Configure Cisco Mediatrace, Cisco IOS IP SLA, and Performance Monitoring

Hi all,
I am implementing Cisco Prime Collaboration to monitor the quality of the VoIP call.
I am following all the steps that I have to do to accomplish this task at this link:
http://docwiki.cisco.com/wiki/Setting_up_Devices_for_Prime_Collaboration_Assurance#Configuring_Unified_Contact_Center_Enterprise_Devices
And now I am arrived on this step:
Configure Cisco Mediatrace, Cisco IOS IP SLA, and Performance Monitoring
Not all the Cisco devices that I have on the network are "Mediatrace, IP SLA and Performance Monitoring" capabilities. The core switch is one of them.
What will happen if some devices are configured with these capabilities and some are not?
Are the data provided from Cisco Collaboration still reliable?
Thanks in advance.
Luigi

I can't see a reason why the 2 features won't work together. The 2 features will work just fine with each other.
Unfortunately there is no sample config with both feature in the same document, but it will work just fine.

Cisco VSM 7.5 and SLES 11 SP2

Similar Messages

Maybe you are looking for