Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator
Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
Samir
Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.
Similar Messages
-
Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router
Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
SamirHi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir -
How we archieve configuration for Cisco ASA 5500 series appliances
Hi,
We need to archieve configuration for Cisco ASA 5500 series appliances.
We have Cisco works LMS 3.0.1.
Device package installed is 4.2
Any help would be appricated.
Thanks in advance.
SamirHi ,
Thanks for your answer.
Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
Cisoworks. Am I correct ?
Waiting for your reply.
thanks,
Samir -
Cannot access configuration for cisco srp527w voice
I am trying to input my SIP configuration to the cisco srp527w voice set up but there is nothing there that I can input. All I can see is info, system, user 1 user 2. When I go to system, it ask for IVR user password...I tried using admin and cisco nothing change. Appreciate if some could help. thanks
Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.
-
Can you monitor Mitel IP Tel on a Cisco router and switching environment? Customer has Mitel Voice but Cisco routers and switches. Will Cisco Works LMS provide functionality?
See this page for a list of LMS white papers:
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/prod_white_papers_list.html
You should fine some deployment guides for each of the various versions. Those will help get you started. -
Cisco pix 525 and 515 cannot archieve configuration in LMS 3.0.1
Hi,
we have several cisco pix 525 and 515 cannot archieve configuration in LMS 3.0.1
Any help would be greatly appriciated.
Thanks in advance
SamirHi,
Here is the output.
*** Device Details for ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
RUNNING
CM0151 PRIMARY RUNNING Config fetch failed for ********* Cause: SSH: Failed to establish SSH connection to 10.192.18.10 - Cause: Authentication failed on device 3 times.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
But when I do mangement station to Device it gives me following results:
Interface Found: 10.192.18.10
Status: UP
Test Results
UDP Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 64 protocol: udp port: 7
TCP Failed
sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 0 size: 0 protocol: tcp port: 7
HTTP Failed
sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 33 protocol: http port: 80
TFTP Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 25 protocol: tftp port: 69
SNMPRv2c(Read) Okay
sent: 5 recvd: 5 min: 0 max: 0 avg: 0 timeout: 2 min_size: 1472 protocol: snmpv3_get port: 0
SNMPWv2c(Write) Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 min_size: 1472 protocol: snmpv3_set port: 0
SSHv2 Failed
TELNET Okay
Waiting for your reply.
Samir -
Cisco Work (LMS 2.6) Device Configuration
Hi,
Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.
Thanks & Regds,
Lalitif you enable the so called shadow directory feature under: Admin -> Config Mgmt -> Archive Mgmt -> Archive Settings
then the defaut location is \CSCOpx\files\rme\dcma
Cheers,
Michel -
Cisco Works LMS 3.1 Integration with ACS v5.2
Hello Experts,
our customer has a working integration with the Cisco Works LMS 3.1 and an ACS v3.3 as it is described in this document:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html
Now we are changing the old ACS Servers to the new ACS v5.2 platform. Is it possible to integrate the LMS to the new ACS Server? We want to use a granular user access restriction for SuperAdmins, Hotline Users an so on...
Thanks,
FlorianHi Florian,
actually the ACS 5.2 is not supported in CS 3.2
here is a list of the supported ACS servers under LMS 3.1
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.2/user/guide/admin.html#wp865998 -
Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
This vulnerability has been fixed in release apache 2.2.20 and further corrected
in 2.2.21. You are advised to upgrade to version 2.2.21 (or newer) or the
legacy 2.0.65 release,
Can any one give the steps to upgrade the apache http server 2.2.10 to 2.2.21 in windows 2008 server?For the following PSIRT:
http://www.cisco.com/en/US/products/csa/cisco-sa-20110830-apache.html
Download the following patch "lms40-win-Oct2011-su1-0.zip" :
http://www.cisco.com/cisco/software/release.html?mdfid=283434800&flowid=19062&softwareid=280775103&os=Windows&release=4.0&relind=AVAILABLE&rellifecycle=&reltype=latest
The instructions should be in the zip file how to install the patch.
This should cover all theses bugs that you can query in the bug tool kit:
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
CSCte45565
CSCto12712
CSCto23584
CSCto23622
CSCto35544
CSCto35577
CSCtq48990 -
Hi,
I am using Cisco works LMS 3.1 with HUM 1.1.0. I am receiving thresold and job schedule mail alert from HUM.
It is showing error in JOB history “Not able to connect the mail server” while alerts from RME,IPM,CS,DFM are coming on mail.
I have Configured HUM just 3 days back and all others application had been configure 4 months back.
Please help.
Regards,
DJHi Clarke,
Thanks for response. Please see the attached HUM smtp error. I have tried the HUM JOB with sniffer to filter smtp port 25 traffic but nothing is reflecting
in sniffer when trying to send mail through HUM while DFM,RME IPM mail are showing in sniffer and we are getting mail as well.
I have upgraded HUM version from 1.1.0 to 1.1.2 but the error is same.
Regards,
Dinesh Joshi -
Need to do switches configuration archive using the cisco works LMS 3.2
Hi folks,
We have a cisco works LMS 3.2 bundle which contains Resource Manager Essentials 4.3.0 . I am trying to do config archive of all our network switches using RME. I have no idea how to do it . so i came here ...
Guide me what are the things to be done in both switch side and RME side.Hi Mohammed,
You can do this from here :
RME > Admin > Config Mgmt > Archive Mgmt
check the below linlk for more information:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/config.html#wp1070778
Thanks-
Afroz
[Do rate the useful post] -
Cisco Works LMS R3.1 with ACS R5.1
I search on internet about the AAA integration between LMS R3.1 y ACS R5.1, and all the information that I found it's related to ACS R4.1. It's possible to integrate with ACS R5.1.
Regards and thanks in advanced
Luis MartinezNael,
Sorry to batter you, but I was trying to migrate my Cisco Works LMS R3.1 to R3.2 and from the support page of CISCO I just can donwload the following version LMS R3.2.1 (LMS R3.2 service pack 1). I tried to install that version but i got an error that saids "LMS R3.2.1 needs LMS R3.2 installed on the server"
Could you please tell me where can I download the complete and initial LMS R3.2.
Thanks in advanced for your kindly help.
Luis Martinez -
System Requeriments Cisco Works LMS 2.5
Hi
I need to know if the Cisco Works LMS 2.5 can be instaled in a Windows 2003 Server whith Service Pack 2 or i need to work whithout the SP2
Thank?sLMS 2.5.1 is supported with windows server 2003 SP1or later
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_upgrade_guides_chapter09186a00805af1dc.html#wp1032750 -
RAID Configurations for Cisco servers
Hi All,
What is the RAID configuration for Cisco Appliance(Version 8.5) like CUCM, CUPS, CUIC, Unity etc?RAID Configuration will be done while installtion itself or we need to do it explicitly?
Regards,
AdithyaHi Geoff,
Thanks for the reply. Just wanted to know whether if this RAID configuartion is similar to the other server RAID where we install Cisco applications.(Like OS & Application Software is RAID 1 and Database is RAID10).
Regards,
Adithya -
AEBS (4g) WD my passport work as NAS/FTP step by step configuration for novice in AirPort Utility Win Xp/iOS.
First off all, is this possible to configure this to work over net? Next i need help in configurating ports, etc. I don't find solution in other topics. Sorry for my English!
Maybe you are looking for
-
Download Adobe Flash Player it is so slow at Downl...
So Slow at Download Why is Download Adobe Flash Player So Slow on Download I am on 10.2 i whating to get the next one 10.3 ========= I am whating to know Why Download is so slow Download all on thay Adobe Web Site
-
Can't close old production order
Hello, First, yes, I know this question has been posted many times. I have checked to make sure the order is in TECO status. I have checked COGI, CO1P and COFC. Please read my comments and let me know if you can help. We are trying to clean up old
-
Multiple PWWN on single switch port
Hi, I wanted to know, how its possible to have multiple PWWN on single switch port..?? Whats the concept behind it.. Thanks Rajeev.
-
Error logs for Jdeveloper embedded oc4j
Hi guys, I am currently using the oc4j embedded within jdeveloper (9.0.2) to develop and obviously to debug some code. When there is an exception in the init() method, there seems to be no record of it in the logs, the only log I found are in jdev/sy
-
New Dimensions in Standard InfoCube
Hi, Can we add new dimensions in a standard InfoCube. Thanks