CISCO Works LMS R3.1 - Displaying the devices hostnames

Hi everyone,
I need some help here, I would like to show in CW the devices names insted of the IP addresss. I know that in order to do that I need to put the devices registers on the DNS or the host file on the CW server.
I already put the registers on the Server host file, and en CS on the DCR database for each device I have their IP address and their hostname, on DFM I also got the devices hostnames, but on RME and campus databases I only find the devices IP address.
I'm doing something wrong or misssing something? any help wpuld be appreciate.
Luis Martinez

I thinks I had a issue with the devices groups, I configured that all the discoveries had to put the devices on the group name YPFB-A, but cheking on CS servies, I only have the group Oficina Central (this was my old decives group) therefore all the dicovered devices gone to the all devices general group. When configurin the discovery i can see this note and I could not choose the YPFB-A nor the Oficina Central group.
Note : All reachable devices discovered at the end of this Device Discovery cycle will be added only to "All Devices" group if Grouping Server is down OR CiscoWorks server is in DCR Slave mode.
any help would be apreciated

Similar Messages

  • Cisco Work (LMS 2.6) Device Configuration

    Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.
    Thanks & Regds,

    if you enable the so called shadow directory feature under:  Admin -> Config Mgmt -> Archive Mgmt -> Archive Settings
    then the defaut location is \CSCOpx\files\rme\dcma

  • Need to do switches configuration archive using the cisco works LMS 3.2

    Hi folks,
            We have a cisco works LMS 3.2 bundle which contains Resource Manager Essentials 4.3.0 . I am trying to do config archive of all our network switches using RME. I have no idea how to do it . so i came here ...
    Guide me what are the things to be done in both switch side and RME side.

    Hi Mohammed,
    You can do this from here :
    RME > Admin > Config Mgmt > Archive Mgmt
    check the below linlk for more information:
    [Do rate the useful post]

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

  • Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

    Hi All,
    We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
    Any help would be appriciated.
    Thanks in advance

    *** Device Details for d0151-100 ***
    Protocol ==> Unknown / Not Applicable
    Selected Protocols with order ==> TFTP,SSH,HTTPS
    Execution Result:
    Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
    This is the error while doing syn archieve.
    I am not sure about Rtr7000 version but we have latest Rtr7000.
    Waiting for your kind reply.

  • Cisco Works LMS 3.1 Integration with ACS v5.2

    Hello Experts,
    our customer has a working integration with the Cisco Works LMS 3.1 and an ACS v3.3 as it is described in this document:
    Now we are changing the old ACS Servers to the new ACS v5.2 platform. Is it possible to integrate the LMS to the new ACS Server? We want to use a granular user access restriction for SuperAdmins, Hotline Users an so on...

    Hi Florian,
    actually the ACS 5.2 is not supported in CS 3.2
    here is a list of the supported ACS servers under LMS 3.1

  • Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability

    Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
    This vulnerability has been fixed in release apache 2.2.20 and further corrected
    in 2.2.21. You are advised to upgrade to version 2.2.21 (or newer) or the
    legacy 2.0.65 release,
    Can any one give the steps to upgrade the apache http server 2.2.10 to 2.2.21 in windows 2008 server?

    For the following PSIRT:
    Download the following patch "" :
    The instructions should be in the zip file how to install the patch.
    This should cover all theses bugs that you can query in the bug tool kit:

  • Cisco Works LMS HUM issue

    I am using Cisco works LMS 3.1 with HUM 1.1.0. I am receiving thresold and job schedule mail alert from HUM.
    It is showing error in JOB history  “Not able to connect the mail server” while alerts from RME,IPM,CS,DFM are coming on mail.
    I have Configured HUM just 3 days back and all others application had been configure 4 months back.
    Please help.

    Hi Clarke,
    Thanks for response. Please see the attached HUM smtp error. I have tried the HUM JOB with sniffer to filter smtp port 25 traffic but nothing is reflecting
    in sniffer when trying to send mail through HUM while DFM,RME IPM mail are showing in sniffer and we are getting mail as well.
    I have upgraded HUM version from 1.1.0 to 1.1.2 but the error is same.
    Dinesh Joshi

  • Cisco Works LMS

    Can you monitor Mitel IP Tel on a Cisco router and switching environment? Customer has Mitel Voice but Cisco routers and switches. Will Cisco Works LMS provide functionality?

    See this page for a list of LMS white papers:
    You should fine some deployment guides for each of the various versions.  Those will help get you started.

  • Cisco Works LMS R3.1 with ACS R5.1

    I search on internet about the AAA integration between LMS R3.1 y ACS R5.1, and all the information that I found it's related to ACS R4.1. It's possible to integrate with ACS R5.1.
    Regards and thanks in advanced
    Luis Martinez

    Sorry to batter you, but I was trying to migrate my Cisco Works LMS R3.1 to R3.2 and from the support page of CISCO I just can donwload the following version LMS R3.2.1 (LMS R3.2 service pack 1). I tried to install that version but i got an error that saids "LMS R3.2.1 needs LMS R3.2 installed on the server"
    Could you please tell me where can I download the complete and initial LMS R3.2.
    Thanks in advanced for your kindly help.
    Luis Martinez

  • System Requeriments Cisco Works LMS 2.5

    I need to know if the Cisco Works LMS 2.5 can be instaled in a Windows 2003 Server whith Service Pack 2 or i need to work whithout the SP2

    LMS 2.5.1 is supported with windows server 2003 SP1or later

  • I have an airport extreme 2013.  Why does my airport utility sometimes display IP addresses and other times the names of the devices?  I want it to always display the device names.

    I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.

    The utility has had less and less useful information .. it might be time to simply find a different utility.
    Fing network scanner. iphone and ipad.
    This is very popular.. I do not know of what works well on Mac OS because i have installed 5.6 utility which of course has far more info than the later toy version. Plus using an Asus router which has excellent listing of all the clients.
    Sometimes beating yourself up to make apple routers do what you want is easier solved with lateral thinking.

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
    If that does not work then see here

  • How to display the device name during file sending with Bluetooth

    I get this Message:
    File Receive Conformation
    Do you want to receive a file from 00:13:70:69:95:84?
    My Question is how can it display the device name not the device address?
    Message was edited by: hazzaa

    The same situation when I want to send photo from mobile phone to my notebook. I didnt find any option how to change it.
    When I send photo from notebook to the mobile phone the notebook name (device name) is displayed. Try to check external device properties. Maybe you will find there way to change it.

Maybe you are looking for

  • Why can't I get my iPad to connect via bluetooth to my iPhone 5s?

    I never have been able to get my iPhone 4s or the new iPhone 5s to connect with my iPad via Bluetooth. Both are running the latest 7.0.3 software.

  • Where are the regular maintenance updates?

    Most expensive/professional software I own licences for receives maintenance updates and bug fix patches on a regular basis. Even with shareware and freeware, the patches and updates just keep coming. Flash Professional should certainly be no differe

  • Lost purchased apps after computer backup

    replaced macbook hard-drive bought new apps on itunes through iphone and through macbook. needed to do a clone restore of macbook hard-drive as new drive was having issues macbook hard drive successfully restored and all was good connected iphone to

  • Backing up ITunes on .Mac/iDisk

    I subscribe to .Mac, solely for the convenience of backing up files on iDisk. However, iDisk will not back up the iTunes library except on a song-by-song basis. I have found no way to back up the entire library, nor to back up just one artist, nor to

  • Time in calendar

    When I log into mobilme and post something in the calendar at 11 am, when I sync it with my Iphone the calendar shows it to be at 1 pm. How do i correct the time difference in mobilme