Cisco Works LMS R3.1 with ACS R5.1

I search on internet about the AAA integration between LMS R3.1 y ACS R5.1, and all the information that I found it's related to ACS R4.1. It's possible to integrate with ACS R5.1.
Regards and thanks in advanced
Luis Martinez

Sorry to batter you, but I was trying to migrate my Cisco Works LMS R3.1 to R3.2 and from the support page of CISCO I just can donwload the following version LMS R3.2.1 (LMS R3.2 service pack 1). I tried to install that version but i got an error that saids "LMS R3.2.1 needs LMS R3.2 installed on the server"
Could you please tell me where can I download the complete and initial LMS R3.2.
Thanks in advanced for your kindly help.
Luis Martinez

Similar Messages

  • Cisco Works LMS HUM issue

    I am using Cisco works LMS 3.1 with HUM 1.1.0. I am receiving thresold and job schedule mail alert from HUM.
    It is showing error in JOB history  “Not able to connect the mail server” while alerts from RME,IPM,CS,DFM are coming on mail.
    I have Configured HUM just 3 days back and all others application had been configure 4 months back.
    Please help.

    Hi Clarke,
    Thanks for response. Please see the attached HUM smtp error. I have tried the HUM JOB with sniffer to filter smtp port 25 traffic but nothing is reflecting
    in sniffer when trying to send mail through HUM while DFM,RME IPM mail are showing in sniffer and we are getting mail as well.
    I have upgraded HUM version from 1.1.0 to 1.1.2 but the error is same.
    Dinesh Joshi

  • Cisco Works LMS 3.1 Integration with ACS v5.2

    Hello Experts,
    our customer has a working integration with the Cisco Works LMS 3.1 and an ACS v3.3 as it is described in this document:
    Now we are changing the old ACS Servers to the new ACS v5.2 platform. Is it possible to integrate the LMS to the new ACS Server? We want to use a granular user access restriction for SuperAdmins, Hotline Users an so on...

    Hi Florian,
    actually the ACS 5.2 is not supported in CS 3.2
    here is a list of the supported ACS servers under LMS 3.1

  • Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

    Hi All,
    We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
    Any help would be appriciated.
    Thanks in advance

    *** Device Details for d0151-100 ***
    Protocol ==> Unknown / Not Applicable
    Selected Protocols with order ==> TFTP,SSH,HTTPS
    Execution Result:
    Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
    This is the error while doing syn archieve.
    I am not sure about Rtr7000 version but we have latest Rtr7000.
    Waiting for your kind reply.

  • System Requeriments Cisco Works LMS 2.5

    I need to know if the Cisco Works LMS 2.5 can be instaled in a Windows 2003 Server whith Service Pack 2 or i need to work whithout the SP2

    LMS 2.5.1 is supported with windows server 2003 SP1or later

  • Cisco Work (LMS 2.6) Device Configuration

    Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.
    Thanks & Regds,

    if you enable the so called shadow directory feature under:  Admin -> Config Mgmt -> Archive Mgmt -> Archive Settings
    then the defaut location is \CSCOpx\files\rme\dcma

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

  • Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability

    Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
    This vulnerability has been fixed in release apache 2.2.20 and further corrected
    in 2.2.21. You are advised to upgrade to version 2.2.21 (or newer) or the
    legacy 2.0.65 release,
    Can any one give the steps to upgrade the apache http server 2.2.10 to 2.2.21 in windows 2008 server?

    For the following PSIRT:
    Download the following patch "" :
    The instructions should be in the zip file how to install the patch.
    This should cover all theses bugs that you can query in the bug tool kit:

  • Need to do switches configuration archive using the cisco works LMS 3.2

    Hi folks,
            We have a cisco works LMS 3.2 bundle which contains Resource Manager Essentials 4.3.0 . I am trying to do config archive of all our network switches using RME. I have no idea how to do it . so i came here ...
    Guide me what are the things to be done in both switch side and RME side.

    Hi Mohammed,
    You can do this from here :
    RME > Admin > Config Mgmt > Archive Mgmt
    check the below linlk for more information:
    [Do rate the useful post]

  • Cisco Works LMS

    Can you monitor Mitel IP Tel on a Cisco router and switching environment? Customer has Mitel Voice but Cisco routers and switches. Will Cisco Works LMS provide functionality?

    See this page for a list of LMS white papers:
    You should fine some deployment guides for each of the various versions.  Those will help get you started.

  • Cisco Works LMS 4.0 doesn´t start

    Hello All
    i have big trouble with me LMS 4.0 installation. I did an Upgrade from LMS 3.2 to LMS 4.0. After that the Works was running without any problems. After some days i´d tried to login on the LMS and it told me something like my lincens where corrupt or so. I´d tried to start the CiscoWorks Demon Manger but he didn´t start. OK after some investigation at the i-net i decided to perform a clean installation of the Server an Cisco Works.
    So after i do thes i´d perform a restore of my old Data from LMS 3.2. Now i investicated that my ANI Server Falied to start. OK than i tried to restart the Works Demon ... f... and what will happend ?!?!?! The demon doesn´t start. Can someone help me ?!?! Please i will not perform a new istallation again.
    C:\Windows\system32>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Hi i have an update for this issues ... After i´d tried to start all Works- Services be hand ... all Services will start execpt the deamon ... When i loged in i get messages "License Server/Deamon Manager is down. Please  check license.log for more information."
    Thats the same situtaion befor the new installation.

    Hi Afroj
    i´d just have an update for you and maybe for Martin. I´d checked the services and investigate that the ANIDatabase Engine
    was not stoped. After i stoped the service "by Hand". I tried to reinalize the Database and see ... IT WORKS ...
    D:\CiscoWorks\CSCOpx\bin>perl.exe dsn=ani dmprefix=ANI
    WARNING: Existing contents of ani database will be lost.
    Do you want to continue [y/n]?y
    INFO: Starting the DataBase
        Starting database engine aniEng
    INFO: Process created
    INFO: Started the Database engine : aniEng Retry 0
    INFO: Started the Database engine : aniEng Retry 1
    INFO: Started the Database engine : aniEng Retry 2
    INFO: Started the Database engine : aniEng Retry 3
    INFO: Started the Database engine : aniEng Retry 4
    INFO: Started the Database engine : aniEng Retry 5
    INFO: Started the Database engine : aniEng Retry 6
    INFO: Started the Database engine : aniEng Retry 7
    INFO: Started the Database engine : aniEng Retry 8
    INFO: Started the Database engine : aniEng Retry 9
    INFO: Getting message
    INFO: Connect the database dsn=ani
    INFO: Connected the Database
    INFO: Command Executed
    INFO: Connecting the Database ani
    INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4f
    INFO: Preparing AUTH cmd
    INFO: AUTH Executed
    INFO: AUTH cmd finished
    INFO: Stopping the Database engine ani
        Stopping database engine aniEng
    INFO: File not exists.SQL Anywhere Command File Hiding Utility Version
    INFO: Database [ani] authenticated successfully.
    ani database initialization is completed.
    D:\CiscoWorks\CSCOpx\bin>pdshow ANIServer
            Process= ANIServer
            State  = Running with busy flag set
            Pid    = 11136
            RC     = 0
            Signo  = 0
            Start  = 8/22/2011 1:01:29 PM
            Stop   = Not applicable
            Core   = Not applicable
            Info   = ANIServer started.
    Many Thanks for your help ...

  • Cisco Works "Devices not configured in ACS"

    I have instaled Cisco Works ver. 4.3.1
    I have added using the Device Discovery, my devices. Some of them where not configured already on ACS with the loopback address, that was the one on the discovery configurations. Because of that, i could not manage those devices, althoug i could authenticate on them. I then updated the ACS with the loopback address, and configured the router's to authenticate using the source-interface of the loopback.
    The problem is that i keep not being able to manage this devices on the cworks, because the are still as "Devices not configured in ACS".
    Can anyone help me here?
    Miguel Amaral

    This happens, when you integrate the ciscoworks with ACS and Router/switches not configured with ACS. Try to reconfigure the device in ACS, try removing and adding it again in common services...Try for a single device and check it out... Try stopping/starting cw services after that // net stop crmdmgtd, net start crmdmgtd. Revert with the results..

  • Cisco Prime LMS appliance Compatibilty with Cisco Prime NCS

    Is it possible if we can install Cisco Prime LMS 4.2 in the appliance which is inbuilt with Cisco Prime  NCS .
    We have PILMS42-1.5K-U license available with us.

    One can install either LMS 4.2 or NCS on the a physical (software on PRIME-NCS-APL-K9 hardware) or virtual appliance (software installed on customer-provided VM).
    The two products (NCS and LMS) cannot coexist on a given appliance instance. This is due to change in the future as LMS and NCS merge under the Cisco Prime Infrastructure 2.0 release but for now they are distinct and separate products with a common approach and similar look and feel but requiring separate servers, whether physical or virtual.
    Please refer to the ordering and licensing guide here.

  • Cisco ASA go Out of Sync through Cisco works LMS 2.6

    Cisco works startup/running Out of Sync on Cisco ASA.

    The problem description is a bit sparse.  However it is important to note that the last day for support on LMS 2.6 was June 30, 2011.
    Here is a link to the End of Life announcement.

  • Problem with License Server in Cisco Works LMS 3.0

    Dear all,
    In my LMS server it is giving error license server is down. while checking the same in process it is not running. i ahve feteched the lod also . can any one know about this error

    /* Style Definitions */
    {mso-style-name:"Table Normal";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-fareast-font-family:"Times New Roman";
    - Error running License Server: C:\PROGRA~1\CSCOpx\etc\licenses\
    Could you please verify whether you have the file in the specified location? If not, please create the file (the privileges should be the same as for all other files in this derectory) and put the number: 40401. Restart the daemons afterwards and verify the situation.

Maybe you are looking for

  • Problem with Buttons/Form Fields in Acrobat PDF when created in InDesign CS4

    So I have been working for quite some time on an interactive form for an internal client at my job. It has two major components, one is the side bar navigation, which I created using buttons in InDesign which link to bookmarks in the document. The se

  • In which table can maintain the SAP MM Display changes?

    hi, I have One doubt. Regarding In MM... In which Table can Maintain the Changes of Material?

  • Ping with '-t'

    I am a new user to LabView!  I was playing with System for the command 'ping'.  It worked out find as it is.  But, now, the problem comes when I use 'ping -t'.  In Windows, the only way to stop this execution is by pressing ct

  • PS Elements upgrade question

    I have been using PS Elements 7 for a while, and have created several large Albums in the Organizer that I would like to preserve. I am about to install PS ELements 10 - this is my first upgrade and I'm worried about losing my Album setups in the upg

  • Yet another Applications/OS X quitting post

    I have read every message on this forum dealing with this problem and tried every suggestion, but nothing yet has work. I've had my MacBook for a week now (And just switched over from a PC. Sucky to be having this trouble right away) and I have alrea