Cisco Works LMS to Cisco Prime 1.1
With this licenses as per table below for Prime 1.1, are we gonna get both NCS and LMS Licenses? What i know of is with Prime 1.2
you are gonna have both NCS and LMS Licenses. Please advise!:)
Part Number
Description
R-PI-1.1-UP-K9
LMS 2.x/3.x to Cisco Prime Infrastructure 1.1 Major Release Upgrade
Major Release Upgrade Options
R-PI1.1-100-UP-K9
LMS 2.x/3.x to Cisco Prime Infrastructure 1.1 Major Release Upgrade - 100 Device
Hi there,
LMS Common Services by default only has 5 useful roles:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.1.1/user/guide/admin.html#wp1014874
Help Desk
Approver
Network Operator
Network Administrator
System Administrator
What you are asking can only be done in conjunction with some sort of Radius or ACS server . The security levels mentioned above is for application control to limit access to prevent unauthorized usage of CiscoWorks applications. For device and and application control, you will need an ACS server for that.
More information on pluggable authentication can be found here:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.1.1/user/guide/admin.html#wp833222
Similar Messages
-
Cisco Work (LMS 2.6) Device Configuration
Hi,
Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.
Thanks & Regds,
Lalitif you enable the so called shadow directory feature under: Admin -> Config Mgmt -> Archive Mgmt -> Archive Settings
then the defaut location is \CSCOpx\files\rme\dcma
Cheers,
Michel -
Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
SamirMake sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.
-
Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router
Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
SamirHi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir -
Cisco Works LMS 3.1 Integration with ACS v5.2
Hello Experts,
our customer has a working integration with the Cisco Works LMS 3.1 and an ACS v3.3 as it is described in this document:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html
Now we are changing the old ACS Servers to the new ACS v5.2 platform. Is it possible to integrate the LMS to the new ACS Server? We want to use a granular user access restriction for SuperAdmins, Hotline Users an so on...
Thanks,
FlorianHi Florian,
actually the ACS 5.2 is not supported in CS 3.2
here is a list of the supported ACS servers under LMS 3.1
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.2/user/guide/admin.html#wp865998 -
Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
This vulnerability has been fixed in release apache 2.2.20 and further corrected
in 2.2.21. You are advised to upgrade to version 2.2.21 (or newer) or the
legacy 2.0.65 release,
Can any one give the steps to upgrade the apache http server 2.2.10 to 2.2.21 in windows 2008 server?For the following PSIRT:
http://www.cisco.com/en/US/products/csa/cisco-sa-20110830-apache.html
Download the following patch "lms40-win-Oct2011-su1-0.zip" :
http://www.cisco.com/cisco/software/release.html?mdfid=283434800&flowid=19062&softwareid=280775103&os=Windows&release=4.0&relind=AVAILABLE&rellifecycle=&reltype=latest
The instructions should be in the zip file how to install the patch.
This should cover all theses bugs that you can query in the bug tool kit:
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
CSCte45565
CSCto12712
CSCto23584
CSCto23622
CSCto35544
CSCto35577
CSCtq48990 -
Hi,
I am using Cisco works LMS 3.1 with HUM 1.1.0. I am receiving thresold and job schedule mail alert from HUM.
It is showing error in JOB history “Not able to connect the mail server” while alerts from RME,IPM,CS,DFM are coming on mail.
I have Configured HUM just 3 days back and all others application had been configure 4 months back.
Please help.
Regards,
DJHi Clarke,
Thanks for response. Please see the attached HUM smtp error. I have tried the HUM JOB with sniffer to filter smtp port 25 traffic but nothing is reflecting
in sniffer when trying to send mail through HUM while DFM,RME IPM mail are showing in sniffer and we are getting mail as well.
I have upgraded HUM version from 1.1.0 to 1.1.2 but the error is same.
Regards,
Dinesh Joshi -
Need to do switches configuration archive using the cisco works LMS 3.2
Hi folks,
We have a cisco works LMS 3.2 bundle which contains Resource Manager Essentials 4.3.0 . I am trying to do config archive of all our network switches using RME. I have no idea how to do it . so i came here ...
Guide me what are the things to be done in both switch side and RME side.Hi Mohammed,
You can do this from here :
RME > Admin > Config Mgmt > Archive Mgmt
check the below linlk for more information:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/config.html#wp1070778
Thanks-
Afroz
[Do rate the useful post] -
Can you monitor Mitel IP Tel on a Cisco router and switching environment? Customer has Mitel Voice but Cisco routers and switches. Will Cisco Works LMS provide functionality?
See this page for a list of LMS white papers:
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/prod_white_papers_list.html
You should fine some deployment guides for each of the various versions. Those will help get you started. -
Cisco Works LMS R3.1 with ACS R5.1
I search on internet about the AAA integration between LMS R3.1 y ACS R5.1, and all the information that I found it's related to ACS R4.1. It's possible to integrate with ACS R5.1.
Regards and thanks in advanced
Luis MartinezNael,
Sorry to batter you, but I was trying to migrate my Cisco Works LMS R3.1 to R3.2 and from the support page of CISCO I just can donwload the following version LMS R3.2.1 (LMS R3.2 service pack 1). I tried to install that version but i got an error that saids "LMS R3.2.1 needs LMS R3.2 installed on the server"
Could you please tell me where can I download the complete and initial LMS R3.2.
Thanks in advanced for your kindly help.
Luis Martinez -
System Requeriments Cisco Works LMS 2.5
Hi
I need to know if the Cisco Works LMS 2.5 can be instaled in a Windows 2003 Server whith Service Pack 2 or i need to work whithout the SP2
Thank?sLMS 2.5.1 is supported with windows server 2003 SP1or later
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_upgrade_guides_chapter09186a00805af1dc.html#wp1032750 -
Cisco Works LMS 4.0 doesn´t start
Hello All
i have big trouble with me LMS 4.0 installation. I did an Upgrade from LMS 3.2 to LMS 4.0. After that the Works was running without any problems. After some days i´d tried to login on the LMS and it told me something like my lincens where corrupt or so. I´d tried to start the CiscoWorks Demon Manger but he didn´t start. OK after some investigation at the i-net i decided to perform a clean installation of the Server an Cisco Works.
So after i do thes i´d perform a restore of my old Data from LMS 3.2. Now i investicated that my ANI Server Falied to start. OK than i tried to restart the Works Demon ... f... and what will happend ?!?!?! The demon doesn´t start. Can someone help me ?!?! Please i will not perform a new istallation again.
C:\Windows\system32>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Thanks
Mario
Hi i have an update for this issues ... After i´d tried to start all Works- Services be hand ... all Services will start execpt the deamon ... When i loged in i get messages "License Server/Deamon Manager is down. Please check license.log for more information."
Thats the same situtaion befor the new installation.Hi Afroj
i´d just have an update for you and maybe for Martin. I´d checked the services and investigate that the ANIDatabase Engine
was not stoped. After i stoped the service "by Hand". I tried to reinalize the Database and see ... IT WORKS ...
D:\CiscoWorks\CSCOpx\bin>perl.exe dbRestoreOrig.pl dsn=ani dmprefix=ANI
WARNING: Existing contents of ani database will be lost.
Do you want to continue [y/n]?y
INFO: Starting the DataBase
Starting database engine aniEng
INFO: Process created
INFO: Started the Database engine : aniEng Retry 0
INFO: Started the Database engine : aniEng Retry 1
INFO: Started the Database engine : aniEng Retry 2
INFO: Started the Database engine : aniEng Retry 3
INFO: Started the Database engine : aniEng Retry 4
INFO: Started the Database engine : aniEng Retry 5
INFO: Started the Database engine : aniEng Retry 6
INFO: Started the Database engine : aniEng Retry 7
INFO: Started the Database engine : aniEng Retry 8
INFO: Started the Database engine : aniEng Retry 9
INFO: Getting message
INFO: Connect the database dsn=ani
INFO: Connected the Database
INFO: Command Executed
INFO: Connecting the Database ani
INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4f
e3db41447146f1571g32125eb777a87cbf8b29a954f559d4221b792ff8
INFO: Preparing AUTH cmd
INFO: AUTH Executed
INFO: AUTH cmd finished
INFO: Stopping the Database engine ani
Stopping database engine aniEng
INFO: File not exists.SQL Anywhere Command File Hiding Utility Version 10.0.1.40
51
INFO: Database [ani] authenticated successfully.
ani database initialization is completed.
D:\CiscoWorks\CSCOpx\bin>
D:\CiscoWorks\CSCOpx\bin>pdshow ANIServer
Process= ANIServer
State = Running with busy flag set
Pid = 11136
RC = 0
Signo = 0
Start = 8/22/2011 1:01:29 PM
Stop = Not applicable
Core = Not applicable
Info = ANIServer started.
Many Thanks for your help ...
Regards
Mario -
Cisco ASA go Out of Sync through Cisco works LMS 2.6
Cisco works startup/running Out of Sync on Cisco ASA.
Hi,
The problem description is a bit sparse. However it is important to note that the last day for support on LMS 2.6 was June 30, 2011.
Here is a link to the End of Life announcement. -
Cisco Works LMS snmp v3 credentials
I'm attempting to get a switch managed via SNMP v3 with CiscoWorks LMS 3.1 but I keep getting an error. I'm using the same User, Group names and also the same auth and priv credentials but I keep getting the error:
User is not authorized to perform the task on device.
I'm not sure what I'm missing.Hi Florian,
actually the ACS 5.2 is not supported in CS 3.2
here is a list of the supported ACS servers under LMS 3.1
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.2/user/guide/admin.html#wp865998 -
Question about Cisco Works LMS 3.2
Hi Mr Joe Clarke,
Can CiscoWorks 3.2 discover and monitor non-Cisco devices too? Non-cisco brands such as Hirschmann, 3com and HP.RME and the Health and Utilization Monitor add-on can do some monitoring of non-Cisco devices, but LMS is designed for Cisco-only networks. Managing non-Cisco devices will give you very limited functionality, and will count against your overall license.
Maybe you are looking for
-
I bourght "E O Wilson's Life on Earth" and backed it up to my iMac. Now it won't sync back to my iPad because it says I don't have permission on this computer. I don't want to download it from iTunes again because it took up a lot of bandwidth. What'
-
I purchased the i-pod in-ear headphones in april of this year and the left one has fallen apart already. Are these replaceable? I still have the receipt and everything.
-
My computer keeps saying it is still importing
My computer will not quit. It keeps saying it is still importing. It has been saying this now for over 12 hours! I am trying to import new photos, but it will not let me. Help!
-
Freezes whenever loading videos or two tabs open at once
if i have two tabs open at once, and try to watch a video it freezes up, or the screen at least. sometimes the video sound keeps playing but the window in frozen. I have the new version of firefox, which i just downloaded.
-
My computer is not recognising my new iphone 5s
I have updated itunes, my laptop and my new iphone but my computer is still not recognising my phone. Any ideas please?