CiscoWorks LMS 3.2 Won't Start on Windows Server 2008 Enterprise

All,
I installed CiscoWorks LMS 3.2 RME on Windows Server 2008 Enterprise and the daemon manager won't start. The server is a VMware ESX server 4.0.
I've uninstalled and reinstalled and still nothing.
I get message "The service is not responding to the control function"
Has anyone had this issue?
Stephanie

There could be several reasons this happens. Common one in Windows 2008 is the swap is not set properly as it defaults to "Automatically manage paging file size for all drives". Try setting the swap to 8GB manually or whichever is the recommendation for your current device count as per:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html
Also make sure the startup services are set this way:
CiscoWorks ANI database engine: Manual
CiscoWorks Daemon Manager: Automatic
CiscoWorks RME NG database engine: Manual
CiscoWorks Tomcat Servlet Engine: Manual
CiscoWorks Web Server: Manual
CWCS Cmf database engine: Manual
CWCS rsh/rcp service: Automatic
CWCS syslog service: Automatic
CWCS tftp service: Automatic
DFM dfmEpm database engine: Manual
DFM dfmFh database engine: Manual
DFM dfmInv database engine: Manual
Set DEP for "Windows Essential Programs Only" and set an exclusion for CSCOpx in your anti-virus on-access scanning settings. Note that Windows 2008 R2 versions are not supported.

Similar Messages

When trying to start my Windows server 2008 R2 Data Center, I am getting "ramdisk device creation failed due to insufficient memory",

I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
Thanks

You might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

SQL Server Service won't start on SQL Server 2008

Hi everyone,
I'm having trouble starting SQL Server service after stopping and starting the service. Before this happened, I created a Stored Procedure for marking all tables at once along with a maintenance plan for differential backup on all my databases based on the
recommendation from this link, http://msdn.microsoft.com/en-us/library/ms253070.aspx.
When I realized that the differential backup failed with some databases displaying (Restoring...) post-fix to the database name, I decided to stop SQL Server service and start it up. That is when I won't be able to start the service again.
Is there a fix for starting the SQL Server service? Any help is very much appreciated.
Additional information:
- With administrator permission granted.
- Service Pack 1 for SQL Server 2008 installed.
- Using default database instance.
- Tried C:\Program Files\Microsoft SQL Server\MSSQL.....\Binn>net start MSSQLSERVER /T3608 ( return msg: System error 5 has occurred. Access is denied.
- When I start SQL Server service, I keep getting this dialog msg:
"Windowns could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 1814."
The event log does not explain or provide any hint on how to fix the problem.
- Log msg:
2010-07-22 10:30:25.09 Server      (c) 2005 Microsoft Corporation.
2010-07-22 10:30:25.09 Server      All rights reserved.
2010-07-22 10:30:25.09 Server      Server process ID is 6076.
2010-07-22 10:30:25.10 Server      Authentication mode is MIXED.
2010-07-22 10:30:25.10 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2010-07-22 10:30:25.11 Server      This instance of SQL Server last reported using a process ID of 5708 at 7/21/2010 3:27:01 PM (local) 7/21/2010 10:27:01 PM (UTC). This is an informational message only; no user action is required.
2010-07-22 10:30:25.11 Server      Registry startup parameters:
    -d C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2010-07-22 10:30:25.14 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2010-07-22 10:30:25.14 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2010-07-22 10:30:25.23 Server      Using locked pages for buffer pool.
2010-07-22 10:30:25.43 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2010-07-22 10:30:25.73 Server      Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2010-07-22 10:30:25.81 spid7s      Starting up database 'master'.
2010-07-22 10:30:26.14 spid7s      CHECKDB for database 'master' finished without errors on 2010-07-19 21:15:02.823 (local time). This is an informational message only; no user action is required.
2010-07-22 10:30:26.18 spid7s      Resource governor reconfiguration succeeded.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.19 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2010-07-22 10:30:26.28 spid7s      SQL Trace ID 1 was started by login "sa".
2010-07-22 10:30:26.29 spid7s      Starting up database 'mssqlsystemresource'.
2010-07-22 10:30:26.31 spid7s      The resource database build version is 10.00.2531. This is an informational message only. No user action is required.
2010-07-22 10:30:26.43 spid10s     Starting up database 'model'.
2010-07-22 10:30:26.43 spid7s      Server name is 'XXXXXXXXXXXXXX'. This is an informational message only. No user action is required.
2010-07-22 10:30:26.47 spid10s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2010-07-22 10:30:26.47 spid10s     Error: 927, Severity: 14, State: 2.
2010-07-22 10:30:26.47 spid10s     Database 'model' cannot be opened. It is in the middle of a restore.
2010-07-22 10:30:26.59 spid10s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2010-07-22 10:30:26.59 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hello,
Could you please copy the model.mdf and modellog.ldf from
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
To
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Agent service won't start on Windows server

Having bounced the Windows 2003 server (64 bit) the instance and listener started up automatically as set in the "services" but the Agent (which WAS running fine)would not start automatically so I tried to manuall start it in the services...a pop up message states it could not start service and to look in event log for details...
find this in event log:
The description for Event ID ( 4 ) in Source ( Oracleagent10gAgent ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 03/13/08 13:52:14 agent exited with retCode 55..
find this in the agent.trc:
2008-03-13 10:49:45 Thread-6956 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03135: connection lost contact
2008-03-13 10:49:46 Thread-6956 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03114: not connected to ORACLE
2008-03-13 10:49:46 Thread-6956 WARN vpxoci: OCI Error -- ErrorCode(12518): ORA-12518: TNS:listener could not hand off client connection
SQL = " OCIServerAttach"...
LOGIN = sys/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cic-svr-app1.Landacorp.local)(PORT=1521))(CONNECT_DATA=(SID=loadtest)))
2008-03-13 10:49:46 Thread-6956 ERROR vpxoci: ORA-12518: TNS:listener could not hand off client connection
2008-03-13 10:50:01 Thread-6956 WARN vpxoci: OCI Error -- ErrorCode(12518): ORA-12518: TNS:listener could not hand off client connection
SQL = " OCIServerAttach"...
LOGIN = sys/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cic-svr-app1.Landacorp.local)(PORT=1521))(CONNECT_DATA=(SID=loadtest)))
2008-03-13 10:50:01 Thread-6956 ERROR vpxoci: ORA-12518: TNS:listener could not hand off client connection
Any ideas? Is there something simple to do or should I try re-install the agent?

Man, I just love to ask questions then answer them myself:-)
The reason for all this was the recent change to daylight savings time here!
The agent (10.2.0.2) will keep running just fine until the server is bounced then it won't start until you apply patch (5884103)...thanks Mike at Metalink!

Application servers are developed in visual c++6.0 were not starting in windows server 2008.

Hi,
Some application servers are developed in visual c++ 6.0 are running windows server 2003 properly.when its running in 2008R2
these r not starting.we checked in security log just process creating and terminating with 0X2,it means file not found even not creating any application logs and not appearing in task manager,only in security log.I tried with command prompt[cmd] as administrator.its
not giving any error.
Anyone please help me what this starting problem issue in server 2008.any dependencies like dlls required.I tried multiple ways.

I think you are in the wrong forum - OCI questions (as opposed to OCI) should go here:
Oracle Call Interface (OCI)
Best of luck

PowerShell Script running Excel won't run on Windows Server 2008 R2

I have a script that creates a report of a single example of each warning or error in the Windows Event log, for each server in a list of servers,with the number of times that error has occurred in the last week on each server. It creates this report in
Excel. I have this script running automated through Task Scheduler for one client on Windows 7 and it's working perfectly. I have another client that I am attempting to run this script automated on a server running Windows Server 2008 R2. I can manually run
the script and everything works, but if I try to schedule the script everything works except for the Excel PowerShell commands. I've have tried:
Created the Desktop folders for config\systemprofile in System32 and in SysWOW64.
Configured permissions in DCOM for Microsoft Excel Application.
Configured folder permissions for config\systemprofile.
Verified PowerShell is working.
Unchecked the option in the task to only run while logged on.
Does anyone have any idea why this is happening and how I can fix it? Thanks!
Sincerely,
Christopher Beard

You might have to launch the application once as the system account so that it can set up the Excel environment, I've had the same problem when trying to update Excel files from an admin Powershell console using my admin account. Use psexec with
a -s option to run it as system account locally while logged on to the target server:
psexec -s "c:\program files (x86)\microsoft office\office14\excel.exe"
Then you'll most likely be prompted to input initials - which is what I suspect is preventing your code from running properly.
There may be some other more elegant way to handle this, but you'd be better off asking that question in one of the forums devoted to Office products.
I hope this post has helped!

Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

Hi all,
During the installation of the LMS-4.2,
It passed the "Initializing" and "Copying" stages,
but, in the "Configuring", it never finishes,
Anyone had have a similar problem?
the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

Thanks for the update. Glad to know it has installed now.
There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
Also, LMS is not supported in other languages installers or setups except English and Japanese.
There are a couple more things you can do/check prior to running the installation.
LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
To check naming convention you can run the following command from Windows Command prompt:
cmd>fsutil.exe 8dot3name query <Drive>
Example:
C:\Users\winlau>fsutil 8dot3name query C:
The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
Based on the above two settings, 8dot3 name creation is enabled on C:.
8dot3 needs to be enabled for all drives LMS will potentially use, including:
Drive where TEMP/TMP is located
The drive LMS is installed to
The drive LMS backs up to
Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
Sample command to enable globally:
"fsutil 8dot3name set 0"
Sample command to enable on one volume:
"fsutil 8dot3name set X: 0"
Note that this needs a reboot to take effect. You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:).
For further information http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
-Thanks
Vinod
**Encourage Contributors. RATE them**

Acrobat X Pro (10 and lower) won't start on Windows 7 (64-bit)

Hello, does anyone know why Acrobat X Pro (10 and lower) won't start on Windows 7 (64-bit)? It just doesn't respond whether I try to open files with it or double-click to start the program. Re-installation and Repair doesn't help. I had the same issue with the previous versions of Acrobat on this computer.
Thank you!

Ditto to all of the above. Acrobat Pro was working fine until a day or two ago, then kaput. Reader still functions. I have Win 7 (64bit), CS6 Design and Web Premium. Anyone with any new ideas?
I don't seem to have an alm.log file, but I do have the amt3.log, see below.
amt3.log
2012-06-12 07:54:34 [5740] AMT: START SESSION, library version 3.5.0.34,3.5
2012-06-12 07:54:34 [5740] AMT: Initializing C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\
2012-06-12 07:54:34 [5740] AMT: Adobe License Manager version 3.5 (build 2.0) RELEASE
2012-06-12 07:54:34 [5740] AMT: Virtualization Turned off
2012-06-12 07:54:34 [5740] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\adobe_caps.dll
2012-06-12 07:54:34 [5740] ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\adobe_caps.dll
2012-06-12 07:54:34 [5740] PCDService: PCD Service in threaded mode
2012-06-12 07:54:34 [5740] performance: AMTPreObtainProductLicense took 4.550707 ms
2012-06-12 07:54:34 [5740] PCD thread: PCD thread started
2012-06-12 07:54:34 [5740] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Adobe_OOBE_Launcher.dll
2012-06-12 07:54:34 [5740] ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Adobe_OOBE_Launcher.dll
2012-06-12 07:54:34 [5740] AMT: App Product Locale [0] = en_US
2012-06-12 07:54:34 [5740] config: Loading configuration for C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT\application.xml
2012-06-12 07:54:34 [5740] config: Found payload code {AC76BA86-1033-F400-7760-000000000005}
2012-06-12 07:54:34 [5740] PCDService: found driver code {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] config: config: Host app was installed, using installed license configuration.
2012-06-12 07:54:34 [5740] PCDService: No value for key [FLMap] in hive [AcrobatPro-AS1-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] config: Setting current license to the driver at startup because no mapping was found.
2012-06-12 07:54:34 [5740] config: Setting current license to DesignWebSuitePremium-CS6-Win-GM [ALL]
2012-06-12 07:54:34 [5740] config: payload code: {AC76BA86-1033-F400-7760-000000000005}
2012-06-12 07:54:34 [5740] config: driver payload code: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] config: driver licensing code: DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] config: current licensing code: DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] config: current locale code: ALL
2012-06-12 07:54:34 [5740] config: Done loading configuration
2012-06-12 07:54:34 [5740] AMT: Locale from PCD [0] = en_US
2012-06-12 07:54:34 [5740] AMT: Reordered Installed App Product Locale [0] = en_US
2012-06-12 07:54:34 [5740] config: Setting insalled locales
2012-06-12 07:54:34 [5740] config: Changing locale to "en_US" because old locale "" is not in the new list of installed languages
2012-06-12 07:54:34 [5740] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\asneu.dll
2012-06-12 07:54:34 [5740] ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\asneu.dll
2012-06-12 07:54:34 [5740] AMT: config: Finding license info for payload: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] AMT: config: PayloadCode: {AC76BA86-1033-F400-7760-000000000005}
2012-06-12 07:54:34 [5740] AMT: config: Driver PayloadCode: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] AMT: config: Installed LicensingCode: DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [BridgeTalkCode] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [BridgeTalkCode] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [ISO_TAGGING_DISABLED] in hive [AcrobatPro-AS1-Win-GM] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [EULA] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Registration] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Registration] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Growl] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Growl] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Updates] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] AMT: config: No BridgeTalkCode found in configuration; Bridgetalk will be disabled.
2012-06-12 07:54:34 [5740] PCDService: No value for key [SuiteFeatureCount] in hive [DesignWebSuitePremium-CS6-Win-GM] in master.
2012-06-12 07:54:34 [5740] AMT: Application can be serialized (sif file found).
2012-06-12 07:54:34 [5740] PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
2012-06-12 07:54:34 [5740] config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [SN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] config: No ALL licensed serial number found in DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [AMTConfigPath] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
2012-06-12 07:54:34 [5740] PCDService: No value for key [LineCV 6] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] PCDService: No value for key [LineCV 7] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] AMT: First launch (serial [90148700767331006075]).
2012-06-12 07:54:34 [5740] AMT: Application state initialized. Obtaining Product License.
2012-06-12 07:54:34 [5740] AMT: Obtaining client features from cache.
2012-06-12 07:54:34 [5740] AMT: Obtaining client product info from cache.
2012-06-12 07:54:34 [5740] AMT: Forcing first launch workflow because product is not licensed from previous launch.
2012-06-12 07:54:34 [5740] AMT: AMT: Obtaining Product License.
2012-06-12 07:54:34 [5740] AMT: Launch Workflow not yet done in foreground in this session.
2012-06-12 07:54:34 [5740] AMT: Starting First Launch Workflow
2012-06-12 07:54:34 [5740] AMT: Running in PROV_APP
2012-06-12 07:54:34 [5740] PCDService: No value for key [EULADelay] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [EULADelay] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [MediaTag] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] config: No media tag found for payload {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] config: Using default media policy RET
2012-06-12 07:54:34 [5740] uiswitch: EULA has already been accepted.
2012-06-12 07:54:34 [5740] AMT: Starting ALM workflow.
2012-06-12 07:54:34 [5740] AMT: Initializing ALM for serialized activation.
2012-06-12 07:54:34 [5740] ALMService: Initializing as licensed app
2012-06-12 07:54:34 [5740] ALM: _info_: Start ALM 3.5 Release (build 3.5.2.0)
2012-06-12 07:54:34 [5740] SLCoreService: Starting up SLCore 1.5 Release (build 1.5.21.224873).
2012-06-12 07:54:34 [5740] SLCoreService: Service construction took 0.0 ms and succeed.
2012-06-12 07:54:34 [5740] ALM: _info_: LEID passed DesignWebSuitePremium-CS6-Win-GM is used to configure SLCore = 0
2012-06-12 07:54:34 [5740] ALM: _info_: Host app is Licensable App
2012-06-12 07:54:34 [5740] PCDService: No value for key [AcrobatPro-AS1-Win-GM{|}16] in hive [SSC-AS1-LE-Dominance] in master.
2012-06-12 07:54:34 [5740] config: SSC LEID dir not found: C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3.5-Win-GM
2012-06-12 07:54:34 [5740] config: SSC LEID dir not found: C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID AcrobatPro-AS1-Win-GM with AMT Path C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID AcrobatSuite-AS1-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\AcrobatSuite-AS1-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID FrameMakerServer-TS3-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\FrameMakerServer-TS3-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID TechnicalCommunicationSuite-TS3-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignSuiteStandard-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuiteStandard-CS5.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID WebSuitePremium-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\WebSuitePremium-CS5.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignSuitePremium-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuitePremium-CS5.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID MasterCollection-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\MasterCollection-CS5.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID ELearningSuite-ES2.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\ELearningSuite-ES2.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID TechnicalCommunicationSuite-TS3.5-Win-GM with AMT Path
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID V6{}TechnicalCommunicationSuite-TS4-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}TechnicalCommunicationSuite-TS4-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID V6{}FrameMakerServer-TS4-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}FrameMakerServer-TS4-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignWebSuitePremium-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignWebSuitePremium-CS6-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignSuiteStandard-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuiteStandard-CS6-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID MasterCollection-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\MasterCollection-CS6-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID V6{}ELearningSuite-ES6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}ELearningSuite-ES6-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID CreativeCloud-CS6-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\CreativeCloud-CS6-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignWebSuitePremium-CS6-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT
2012-06-12 07:54:34 [5740] PCDService: No value for key [MediaTag] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] config: No media tag found for payload {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] config: Using default media policy RET
2012-06-12 07:54:34 [5740] ALM: _info_: MediaTagPolicy is RET
2012-06-12 07:54:34 [5740] PCDService: No value for key [NTL_WO_SN] in hive [DesignWebSuitePremium-CS6-Win-GM] in master.
2012-06-12 07:54:34 [5740] ALM: _info_: Canonical LEID is AcrobatPro-AS1-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Driver LEID is DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [901487007673310060752956] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] SLCoreService: Reading product config [C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT\SLConfig.xml]
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _time_: (func: ALM_Initialize, duration: 0.016 sec)
2012-06-12 07:54:34 [5740] AMT: Performing ALM silent license verification.
2012-06-12 07:54:34 [5740] PCDService: No value for key [EncryptedSerial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Serial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
2012-06-12 07:54:34 [5740] config: No pre-serial number found in {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] PCDService: No value for key [PSN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}en_US] in cache.
2012-06-12 07:54:34 [5740] config: No en_US provisional serial number found in DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [PSN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] config: No ALL provisional serial number found in DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Validate license at Pre-Chrome time
2012-06-12 07:54:34 [5740] ALM: _info_: Searching license for locale en_US ...
2012-06-12 07:54:34 [5740] PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
2012-06-12 07:54:34 [5740] config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] SLCoreService: Reading product config [C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT\SLConfig.xml]
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _info_: Found existing serialization under LEID AcrobatPro-AS1-Win-GM, the serial number locale is ALL
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _info_: Cached license is expired for locale en_US, continue the search to next locale
2012-06-12 07:54:34 [5740] ALM: _info_: No valid license found, fall back to the most preferred locale: en_US
2012-06-12 07:54:34 [5740] PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
2012-06-12 07:54:34 [5740] config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] SLCoreService: Syncing to license store...
2012-06-12 07:54:35 [5740] SLCoreService: Found server mkey.
2012-06-12 07:54:35 [5740] SLCoreService: Loading license references...
2012-06-12 07:54:35 [5740] SLCoreService: Found 4 license file(s)
2012-06-12 07:54:35 [5740] SLCoreService: Parsing license file [20566957.lic] succeed.
2012-06-12 07:54:35 [5740] SLCoreService: Parsing license file [226832637.lic] succeed.
2012-06-12 07:54:35 [5740] SLCoreService: Parsing license file [28738525.lic] succeed.
2012-06-12 07:54:35 [5740] SLCoreService: Parsing license file [7412525.lic] succeed.
2012-06-12 07:54:35 [5740] SLCoreService: License store synchronization took 32.2 ms and succeed.
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] config: Setting current license to AcrobatPro-AS1-Win-GM [ALL]
2012-06-12 07:54:35 [5740] PCDService: No value for key [LoadTrial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [LoadTrial] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [PDApp_WF] in hive [AcrobatPro-AS1-Win-GM] in cache.
2012-06-12 07:54:35 [5740] PCDService: No value for key [ALM_Info_S1] in hive [AcrobatPro-AS1-Win-GM{|}ALL] in cache.
2012-06-12 07:54:35 [5740] ALM: _info_: Performing Block Check
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] PCDService: No value for key [Subscription] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [Subscription] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [ACT_NOINTERNET] in hive [AcrobatPro-AS1-Win-GM] in cache.
2012-06-12 07:54:35 [5740] PCDService: No value for key [SERVICE_ONLINE] in hive [AcrobatPro-AS1-Win-GM] in cache.
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] ALM: _time_: (func: ALM_License_SilentValidate, duration: 0.046 sec)
2012-06-12 07:54:35 [5740] ALM: _info_: ALM_License_SilentValidate return license status: Invalid
2012-06-12 07:54:35 [5740] AMT: License check shows product is unlicensed.
2012-06-12 07:54:35 [5740] AMT: Product is not activated. Starting ALM launch-time product licensing UI.
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] PCDService: No value for key [PDApp_WF] in hive [AcrobatPro-AS1-Win-GM] in cache.
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] ALM: _info_: Entered ALM_NeedANAG
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] PCDService: No value for key [ADOBEID_EXT_PROFILE] in hive [970787040936944783527623] in cache.
2012-06-12 07:54:35 [5740] ALM: _info_: Exiting ALM_NeedANAG
2012-06-12 07:54:35 [5740] AMT: NAG Ignored!!.
2012-06-12 07:54:35 [5740] AMT: Licensing has been refused. Application must exit.
2012-06-12 07:54:35 [5740] AMT: Starting Data Collection for SWTag_Init()
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() productCanonicalLEID = AcrobatPro-AS1-Win-GM;outMappedLEID = AcrobatPro-AS1-Win-GM, unused =
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() productPayloadCode = {AC76BA86-1033-F400-7760-000000000005};driverPayloadCode = {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:35 [5740] PCDService: No value for key [EPIC_APP_543] in hive [AcrobatPro-AS1-Win-GM] in master.
2012-06-12 07:54:35 [5740] AMT: SWTag_Init() Tags Arguments CS6 Design and Web Premium; AcrobatPro-AS1-Win-GM;
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() License Status = unlicensed
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() Tags 970787040936944783527623; 10.0; TRIAL
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() Product Version 10; 0
2012-06-12 07:54:35 [5740] performance: AMTObtainProductLicense took 117.355057 ms
2012-06-12 07:54:35 [5740] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [Updates] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:35 [5740] AUMService: config: No AdobeUpdaterCode found in configuration; AUM will be disabled.
2012-06-12 07:54:35 [5740] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\updaternotifications.dll
2012-06-12 07:54:35 [5740] ServiceLoader: looking for library C:\Windows\system32\updaternotifications.dll
2012-06-12 07:54:35 [5740] ServiceLoader: Failed to find updaternotifications.dll
2012-06-12 07:54:35 [5740] ALMService: Terminating
2012-06-12 07:54:35 [5740] SLCoreService: Shutting down SLCore 1.5 Release (build 1.5.21.224873).
2012-06-12 07:54:35 [5740] SLCoreService: Service destruction took 0.6 ms and succeed.
2012-06-12 07:54:35 [5740] ALM: _info_: End ALM
2012-06-12 07:54:35 [5740] performance: AMTReleaseProductLicense took 5.815388 ms
2012-06-12 07:54:35 [5740] AMT: END SESSION.

Satellite A200 - Button support won't start on windows start up

Hey,
Today I decided to turn off as many useless program's as I could (to speed up my pc) so I went to Msconfig (I have vista home premium 32 bit), and turned a lot of things off. Including the "toshiba button support". The next time I restarted my extra buttons on the top of the keyboard all worked, beside one. The one that normally turns windows media player on. This time, it did nothing at all. The play/resume, stop, forward, backward and internet button all worked without problem.
However, I really liked the WMP button, so I tried to find out what the problem was. I found out it was the button support, so I decided to turn it back on.
However, this did not help :( . I turned it on in msconfig again, but it won't start with windows anymore :(. I know it's the program I need, because when I manually launch the program (it's the program: programfiles/toshiba/TBS/HSON.exe ) the button works.
I did put a V in front of the program in msconfig, but that did not work. Anyone has an idea why not?
Edit: I found a solution, although not the best. If anyone ever has the same problem:
I made a shortcut from the program that had to run (can be found in C:programfiles/toshiba/TBS and is called HSON.exe). Next I clicked on start, and said "all programs", here I selected the folder "opstarten", this is the dutch version, but my guess is it is called something like "start up" in english. In this, I pasted (copy/cut -> paste) the shortcut to the program, and now it starts again :)

Hi!
I agree with Akuma. You should try to reinstall the Toshiba Value Added Package. This controls the media buttons, FN buttons and all special functions on the notebook.
Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

CiscoWorks LMS 4.0.1 is supported on Windows 2008 EE R2 SP1?

Installing CiscoWorks LMS 4.0.1.
I need to know if Windows 2008 server EE R2 with SP1 is now supported.
Many thanks for help.
Andrea

Hello,
Service Pack 1 of Windows 2008 Server Enterprise Edition R2 is not officially supported yet. Reference the readme.
However, I have applied SP1 to my installation of LMS on Windows Server 2008 EE R2 without breaking it. Your mileage may vary.
Hope this helps.

Firefox won't start on windows 7. Used to word when it was on version 18. I have different windows 7 machine it works fine on that.

firefox won't start on windows 7 after upgrading to version 19 or 20. Even if it starts up I cannot do anything on it, its in not responding mode. I have tried uninstalling and installing again with both version 19 and 20. Also i tried deleting the profile and re creating a new profile.

it does not work even in windows safe mode with networking. same issue. if i wait for some time firefox comes but in not responding mode. then a pop shows up with - script: chrome//browser/content/tabbrowser.xml 2123 .

Forefox won't start in windows XP: I get the message that windows "cant' find the exe file" even when I click from the program file, rather than the shortcut.

Forefox won't start in windows XP: I get the message that windows "cant' find the exe file" even when I click from the program file, rather than the shortcut.

Delete the current Firefox shortcut on the desktop and create a new desktop shortcut via the right-click context menu on the Firefox.exe program (Send to > Desktop)

Why won't Web Proxy Admin Service start on Win Server 2008 installation?

Hi,
I've just installed Sun Web Proxy 4.0.13 on my Windows Server 2008 box. I cannot get "Sun Java System Web Proxy Server 4.0.13 Administration Server" to start, it fails with the following event messages:
In Application logs i get:
"+The description for Event ID 26 from source c__sun_proxyserver40_proxy-admserv_config cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.+
+If the event originated on another computer, the display information had to be saved with the event.+
+The following information was included with the event:+
+File C:\Sun\ProxyServer40\proxy-admserv\config/server.xml, line 8, column 8: Unknown element 'SERVER'+
+the message resource is present but the message is not found in the string/message table+"
...and....
"+The description for Event ID 26 from source c__sun_proxyserver40_proxy-admserv_config cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.+
+If the event originated on another computer, the display information had to be saved with the event.+
+The following information was included with the event:+
+File C:\Sun\ProxyServer40\proxy-admserv\config/server.xml, line 8, column 8: Unknown element 'SERVER'+
+the message resource is present but the message is not found in the string/message table+"
Any help would be greatly appreciated. I have JRE 6.0u18 installed, and pointed the install to use that directory for the JRE home.
Many thanks, Mark
P.S. the proxy server service starts fine, it's just the admin service that won't start....

Hello,
Could you please copy the model.mdf and modellog.ldf from
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
To
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

C: drive won't start loading windows

Building a new system - I have a KT4V mainboard in aqn Antec case with a 2000+ CPU, GeForce 4 video card and a single floppy, CD-Rom, and 40 Gbyte drive. Very easy install, zipped thru BIOS process with no problem, system correctly recognizes the components. But when it boots now it gets to the point where all for D-Bracket lights are green, and just sits there with a blinking cursor in the upper left corner - won't start loading windows. I put the disk in another system - loaded fine -it's ready to go. Tried putting Windows XP startup disk in the cd. It recognizes that windows is already installed on the C: drive. I have tried repair and reinstall - after a few minutes the process hangs - I think when it tries to write to the disk for the first time.
I think I've tried everything. Other than figuring out that I have to reverse the HDD Led connector, no progress. :(

I bett the problem lies with the XP motherboard drivers loaded on the hard drive, it will not see the new board.
I would try to reboot on the old machine, load the new MB drivers into a folder on the desktop or wherever, then try to do a right click my computer>properties>hardware>device manager> + IDE ATA/ATIPI controler, uninstall both the primary and secondary channels. It will ask you to restart in between each one but don`t restart until done. Then instead of restarting that machine just shut down and swap the HD into the new system, hopefully it will see the IDE channel and when asked for drivers, direct it to the folder on the desktop or wherever you put them.
I just tryed to unistall both IDE channels on this machine and it reinstalled the drivers after reboot and then rebooted again so if it don`t work you should be able to put it back in the first machine.
Other then that, I think a fresh HD or one that has or needs a reformat installed on the new machine then add this one with the other programs you have as a slave to the first is going to be about the only way I know of.

Satellite A100 - Won't start up Windows

Without changing anything, my Satellite A100 won't start up Windows.
A screen with with Windows foutherstel (failure recovery) gives two options; start windows normally and start up recovery. When I push the first option, there is a quick blue screen, what disapears too fast to read the tekst. Finally the screen failure recovery comes back. in the other option there is a screen Options for system recovery who's said; Can not start the installated program. Click on Ok to shut down the computer.
How do I fix this problem?

Hi hans_3,
Maybe something has muddled up the Windows registry or some important system files and so you cant start Windows anymore or start the system repair option.
I think in this case its necessary to reinstall Windows. Therefore you can take the Toshiba recovery disk that brings your computer back o factor settings where all drivers and tools are already installed but it wipes the whole HDD.
It takes only few minutes and needs some clicks.
Good luck! :)

CiscoWorks LMS 3.2 Won't Start on Windows Server 2008 Enterprise

Similar Messages

Maybe you are looking for