CiscoWorks user options "device type groups|switch and Hubs"

Hi,
We are using CiscoWorks software to deploy new configuration to our network devices. Because our environnement is mixed about version of network devices we have to create a new netconfig job for each device model, because in some plate-forme configuration option, syntax maybe different of each other.
When I create a new netconfig job with my username under "device type groups|switch and Hubs" I have a list there of all plate-forme we have in our production environnement managed by CiscoWorks software. I know thoses group was'nt define by on of us and thoses are define by default in CiscoWorks software, but they are hiden by default per user basic.
We have a new one in our team, I had created his user name and password, but I can find the option where I can asked to make visible to him plate-form device type group as I have in my user configuration.
Also, is it possible to copy private define group to an other user without to make thoses as public ?
Thanks a lot !

Here,
is a view of what I have with my user
but in his profile he is only see
Device type Groups
     + Routers
     + Switches and Hubs
     + Wireless
if he clic on the plus sing to develop group "Switches and Hubs" he see all switches and hub managed by CiscoWorks software. I know He did not create Cisco Catalyst 2912 XL Switch and Cisco Catalyst 2924 XL Switch group in my profile. I know we have to modify an option in CiscoWorks per user basic to view those group, the person who where that option should be modifiy is currently in vacation, but he will need that option enable before our specialist will be back !
Thanks a lot !

Similar Messages

When I use the Norton Safe Search box in Firefox 3.6.19 the letters that I type group together and disappear behind the search button at the end of Norton Safe Search....any help?

I don't know how much more I can add...However, when I type in the Norton Safe Search box up to the search button in Norton Safe Search I can continue to type but I can't see what is being typed because it doesn't allow me to see the trailing end of what I'm typing. This along with the fact that the letters and words don't always automatically advance a space, they group together as I'm typing and I have to stop, provide a space and continue once again. This only happens in Mozilla Firefox, I'm using Firefox 3.6.19. This doesn't happen in the Norton Safe Search Box in Internet Explorer

Maybe another extension that you have installed is causing that problem with that Norton Safe Search add-on.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes 
Disable all other extensions and see if Norton works correctly. 
I so, start enabling extensions one at a time until you find the culprit.
If not, create a new Profile and verify that Norton is the only extension that appears in the new Profile and see if it works correctly. 
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
If not, the problem is with the Norton add-on.

Automatic group switching and notification in Resource Manager

We are creating resource plans that don't kill out-of-control processes, but automatically move them to a low-priority group for investigation. Is there a means by which a session which gets automatically switched can notify something else, like via a trigger, an email, or even just in an alert log message?
Thanks in advance,
Paul Hebert/SUNY ITEC

Although this is an older message, I have been looking for the same type of behavior. In order to manage ad hoc queries, there is desire to monitor the behavior in order to fine tune the resource management. This is based on the really “bad” queries being stopped (KILLED).
Of course this needs to be balanced with not preventing work from being done.
Any thoughts or ideas are welcome.
James

Bluetooth - Browse Device - Spanish Language Switch and no Browse Capabilit

I am trying to connect a Nokia 6085 and browse the phone (to pull photos off). However, although the iMac recognises the phone, when I click on the 'Browse Device' option the resulting screen is in Spanish language and I can't explore the phone. I asked at my local Apple store and they tried to connect to the phone on one of the display machines without problem, so it is an issue with my setup/software. Any ideas?

so, i don't know if this will help in your situation or not, but i have a wireless mighty mouse that i share between two computers. when i use it with one computer and later try to use it with the other computer, i find it will not connect or recognize it.
a very quick solution that i now readily use and works without fail is the following:
(1) turn bluetooth OFF on computer.
(2) turn mouse OFF (could be bluetooth on your device)
(3) turn bluetooth ON on computer
(4) turn mouse ON
within 1-2 seconds it recognizes and connects to the mouse.
perhaps this ritual might work in your situation?

Cisco Prime infrastructure Change severity Switches and hubs - link down alarm

Hi, I want to change the severity of the link down alarm in the Cisco Prime Infrastructure 1.3, but in the menu Administration -> System Settings -> Severity Configuration i can not find the alarm. Some body knows where is it? o where i can change the severity of that alarm?
Thanks in advanced.

Hi Rollin and Daniel,
the first test i did changing the severity was with a new installation, with no devices added and it worked, when i did it in a Prime infrastructure with devices added it didn´t work, well, for this Prime with devices i upgraded it with the patch for 1.3 version and now it works too, the alarms is ok as the alarm severity, this is the link for the patch:
http://software.cisco.com/download/release.html?mdfid=284652876&flowid=38562&softwareid=284272933&release=1.3.0&relind=AVAILABLE&rellifecycle=&reltype=all
i hope this helps,
Regards,
Milton Tizoc.

ACS Group mapping and restrictions

hi,
I would appreciate to receive some configuration steps on ACS to fulfill the following requirement and hope you can help me.
ACS Groups
Netadmin - need telnet/ssh/vpn/wireless
wireless - only wireless authentication
vpn - only vpn authenticaiton
I need to map the above ACS groups to one/or many AD groups and restric access as stated above.
Also please note that one user can be belongs to all three groups in ACS/AD.
thanks in advance.

In ACS user can only belong to one group. But in AD we can have one user a part of multiple group.
In this scenario, it is very important to understand how ACS group mapping works.
Lets say that you have three different groups on AD for NetworkAdmin, RouterAdmin, Wireless. Go to external user database ==Database Group Mappings==Windows NT/2000==select the domain to which you are authenticating==Add mapping.
Select the AD group NetworkAdmin and map it to ciscosecure group 1
select the AD group RouterAdmin and map it to ciscosecure group 2
select the AD group Wireless and map it to ciscosecure group 3
Group mappings work in the order in which they are defined, first configured mapping is looked upon first then second, third and so on. If a user is in AD group NetworkAdmin and that is mapped to ACS group 1 and it is first configured mapping it will be looked for FIRST (If a user exists in NetworkAdmin group it will always be mapped to ciscosecure group 1 and NO further Mappings for this user is checked and user is authenticated or rejected)
Scenario: if you have a user called cisco, in NetworkAdmin group, cisco1 in RouterAdmin group, and cisco2 in Wireless. They will always be dynamically mapped to ACS group 1, 2 and 3 respectively as per above mappings.
You can check the mappings on the passed authentications for users as to what group are they getting mapped to.
SCENARIO:
Now if you want a NetworkAdmin user to authenticate to NetworkAdmin devices and not wireless or RouterAdmin devices you would need to apply NARs to group 1 because NetworkAdmin users are connecting to that group. Which you will permit Access on group basis to a particular NetworkAdmin NDG or individual NetworkAdmin NAS device.
NOTE:
If you are applying NARs for Wireless or VPN devices.. you would need to configure both IP based AND CLI/DNIS based together because NARs were originally designed for cisco IOS for
routers and switches.
IMPORTANT: If a user successfully authenticates to AD database once, its username is cached on the ACS database (NOT password) the only way to remove the previously cached
username is to go to usersetup find that user and delete it manually.
ACS will not support the following configuration:
*An active directory user that is a member of 3 AD groups (group A, B and C) *Those 3 groups are mapped within ACS as follows Group1->A,Group2->B and Group3->C.
*The user is in all 3 groups however he will always be authenticated by group 1 because that is the first group he appears in, even if there is a NAR configured assigning specific AAA clients to the group.
However there if your mappings are in below order...
NT Groups ACS groups
A,B,C =============> Group 1
A =============> Group 2
B =============> Group 3
C =============> Group 4.
You can create a DIFFERENT rule for the users in A,B,C by configuring the NARs in group1.
This rule WILL apply for the use ONLY if he is present in ALL three groups (A,B and C).
You can create a rule for users in group A (Group 2)
You can create a rule for users in group B (Group 3)
You can create a rule for users in group C (Group 4)
Regards,
~JG
Do rate helpful posts

User Cannot manually Type LOV in Prompt Screen

Hi Experts,
WEBI reports built on OLAP Universes (Universes created on SAP BW) has below problem:
As you know when user click's on Run Query or Refresh Data to run reports a prompt screen will pop up and in normal cases he has option of Selecting values for LOV's or user can type his value and run report But reports built on OLAP Universes user must select only from list of values.
Is there any way that user can directly type his value and Run Query/Report.
-Thanks,
DEEPU

Thanks Rohit for the information.
Is that Lov object in your code should be Key or Text? for me key is not passing.
Below is the code reflected into Universe as a filter if we create the prompt (User Variable) at BEx Query
<OPTIONAL><FILTER KEY="[ZREG_BO]"><CONDITION OPERATORCONDITION="InList"><CONSTANT TECH_NAME="@Prompt('Enter Subscriber Region:','A',''Class\Lov Object',multi,primary_key)"/></CONDITION></FILTER></OPTIONAL>
The difference between your code and BEx code is that BEx code uses Index Key ("Primary key" instead of "free") and it uses technical name (CONSTANT TECH_NAME instead of CONSTANT NAME).
If i create prompts at Universe level instead of using the BEx Prompts (User Variables) Will there will be any performance impact ?
Your help is highly appreciated.
-Thanks,
DEEPU.

Which device type support Unicode printing ?

Hi all,
Do you know which cascading font device types support Customer-defined true type fonts ?
I use HP LaserJet printer. I've imported ZSWINCF device type in to SAP system and installed some true type fonts required for my report. It's able to print Unicode text in ABAP List but unable in SAPScript/Smartform printing.
I also try to use ZHPUTF8 or HPUTF8, and install these fonts. But i've problem in printing out.
Do you know how to resolve this problem ?
Thanks,
Best regards,

Hi
see this OSS notes may be useful
OSSNote:960341
Symptom
In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
Other terms
CONVERT_OTF, SAPscript, Smart Forms
Reason and Prerequisites
The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
Example:
%Charwidth values from HP4300 HELVE 060 normal
/Widths
[ 278 333 500 633 633 1000 758 333 333 333 633...
Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
Solution
Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 12:44:06
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
OSS Note: 776507
Symptom
Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
Other terms
SAPscript, SmartForms, printing, device types, OTF
Reason and Prerequisites
Help required to choose proper fonts in a SAPscript or SmartForm
Solution
When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
1) The language version of the form used to produce the printout.
Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
3) The output character set of the device type
Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
4) The set of available printer fonts for a given device type
When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
Note on SAPscript/SmartForms Print Preview:
The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
Which fonts are suitable for a given language?
Language(s): Font family to use in a form:
Latin-1 (Western Europe/Americas) *******
DE,EN,FR,ES,NL,SV COURIER, HELVE, TIMES
 (LETGOTH, LNPRINT)
Latin-2 (Central Europe) ****************
PL, CZ COURIER, HELVE, TIMES
ISO 8859-4 (Baltic) *********************
ET, LT, LV COURIER, HELVE, TIMES
ISO 8859-5 (Cyrillic) *******************
BG, RU, SR, UK COURCYR, HELVCYR, TIMECYR
ISO 8859-7 (Greek) **********************
EL COUR_I7, HELV_I7, TIME_I7
ISO 8859-8 (Hebrew) *********************
HE COURIER, HELVE, TIMES
ISO 8859-9 (Turkish) ********************
TR COURIER, HELVE, TIMES
Simplified Chinese **********************
ZH CNHEI, CNKAI, CNSONG
Japanese ********************************
JA JPMINCHO, DBMINCHO, DBGOTHIC
Korean **********************************
KP KPBATANG, KPDODUM, KPGULIM
 KPGUNGSE, KPSAMMUL
Traditional Chinese *********************
ZF TWDPHEI, TWMING, TWSONG
Thai ************************************
TH THANGSAN, THDRAFT, THVIJIT
Arabic (Unicode systems only) ***********
AR ANDALE_J
Verify your output by examining the OTF data
When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
Goto->Display Requests->Settings
and choose
Display Mode: Raw
Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
//XHPLJ8000 0700 00000000001
IN04EALEXTEST_ZEBRA
IN05%PAGE1
OPDINA4 P 144 240 1683811906000010000100001
IN06%WINDOW2
MT0024401289
CP11000000E
FCHELVE 120 00109XSF100SF101110000067E X
UL +0000000000000
SW00067
CT00000000
ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
//XHPLJ8000 0700 00000000001
The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
IN04EALEXTEST_ZEBRA
In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
OPDINA4 P 144 240 1683811906000010000100001
The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
CP11000000E
Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
FCHELVE 120 00109XSF100SF101110000067E X
Header Data
Release Status: Released for Customer
Released on: 22.08.2005 09:57:20
Priority: Recommendations/additional info
Category: Customizing
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
BC-SRV-SSF Smart Forms
Reward points for useful Answers
Regards
Anji

FlexConnect local/central switched and Access-Accept Packets

For our branch offices’s wireless access, we would like to use FlexConnect with one SSID and two distinct user profiles:
• Full network access, local switched.
• Limited network access, central switched:
◦ To isolate traffic from the branch’s LAN.
◦ To force traffic through a firewall at the central site.
▪ To ease access rules management.
◦ Internet access only by default.
▪ Internet access is located at the central site.
▪ We expect to manage some exceptions to the rule.
We know that it’s not possible to switch from local to central switched using the same SSID with FlexConnect and AAA Override.
However, we found an interesting bit in the documentation pages regarding RADIUS attributes:
Authentication Attributes Honored in Access-Accept Packets (Airespace)
VAP ID
This attribute indicates the WLAN ID of the WLAN to which the client should belong. When the WLAN-ID attribute is present in the RADIUS Access Accept, the system applies the WLAN-ID (SSID) to the client station after it authenticates. [...]
Source:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration/guide/b_cg76/b_cg76_chapter_0101000.html#reference_327F94A40AAE46E48153B265E521DDCF
We then made an assumption that the following was possible:
• Create a second SSID
◦ Broadcast not enabled
◦ Central Switched
• Users would authenticate using the first SSID
• In it’s access-accept packet, the RADIUS server would return an
Airespace-WLAN-Id attribute with the value of the second SSID.
• The WLC would then assign the second SSID to the users so they’re central switched and forwarded through the firewall at the main site.
So far, our tests showed no results.
• Is that solution achievable at all? It seemed so from the documentation, but we haven’t found any documented evidence that someone actually tried it.
• If not, what would you recommend?
For RADIUS, we are using Microsoft 2012r2 NPS servers. Everything’s been working fine with them so far. We can do AAA vlan override for our main site and with FlexConnect also, without any problems. What’s not working is the local/central switched scenario we’re trying to pull off. The RADIUS server sends the Airespace-WLAN-Id attribute from what I see with Wireshark, but the WLC does not seem to react to it like I thought it would. I couldn’t find a debug command that would tell me what the WLC does with the attributes from the access-accept packet. Maybe the behaviour I’m experiencing is to be expected, that’s what I would like to know.
Thank you very much,

Your WLAN is defined with as centrally switched or locally switched, AAA override will not chage that value. AAA attributes can change a users vlan, acl and QoS. The other attributes are intended to use for rules... example:
Is the user part of this AD group and is this user on WLAN ID=1.
You will not be able to go from centrally switched to locally swithed and vice versa. I don't know how you would be able to achieve what your trying to acomplish with one SSID to be honest.

Error: Balance for transaction type group 10 negative for the area 01

Dear All,
Our enduser wants to return the capital goods after 3 years ( Purchased on May 2005) to vendor due to poor quality.
While trying to return through MIGO (Return Delivery - Mvmt Type 122) system throws the following error:
>
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
>
Note: Depreciation posted upto May 2008.
Please guide me for the same.
Regards
Jai

Hi,
I have similar problem. The error message appears if user tried to reverse one of the documents posted incorrectly from PO to an asset. The PO has been create in the last FY, but all the posting in AA happend in this FY.
(Our FY is not equal calendar year).
So cumulated from FY start there were posting made - for:
- aquisition 150 (transaction type group 14)
amount: 428.587,73
- and the couple of credit memos have been posted 105 (with transaction type group 10)
amount: -511.162,90
- and again the aquisition posted 152 but this time form previous FY (transaction type group 19)
amount: 442.537,25
So now, is SAP checking the transaction type group exclusively and in this case would be understandable that the amount is negative already or is looking for the posting, document or entry date?
Thanks, Krysia

Search device Type for Printer Ricoh Aficio BP20n

Hi does anyone knows a Device type for the printer
Ricoh Aficio BP20n
I looked the sNOTE 8928 which routes me to sNOTE 485240.
but "485240" does not exist.
Notes with device types for Gestetner and Savin are not listening the BP20n printer.
"Savin" is a US subsidiary company from Ricoh.
greets chris

Hi Christian,
That's strange, I could see note 485240: Device types supplied by SAVIN
<a href="https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E">https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E</a>
Symptom
The printer manufacturer SAVIN supplies SAP with the following device types. These device types are produced, maintained and supported by Ricoh.
Should you encounter problems while you are using these device types in SAP, do not direct them to the SAP Support hotline. Instead, use the support addresses of the SAVIN Corporation listed below.
Other terms
Device type, SAVIN
Reason and Prerequisites
Detailed information on the SAP device types supplied by the printer manufacturer SAVIN.
Solution
The following products are supported by the SAVIN device types:
Multi-functional Devices
- 4015/4018/4018d
- 8016/8020/8020d
- 9922DP/9927DP *1
- 2522/2527
- 4022/4027
- 8025/8030
- 8025e/8030e *2
- 9935D/9935DP/2035DP/9945DP/2045DP *1
- 2535/2235/2545/2245
- 4035/4135g/4045/4145g
- 4035e/4135eG/4045e/4145eG
- 8035/8045
- 8035e/8035eg/8045e/8045eg *2
- 2055DP/2070DP Type700
- 2555
- 2560/2575
- 4051/4060/4075
- 8055/8065/8075 *2
- 2085DP/2105DP Type850
- 2585/25105 Type850
- 4090/40105 Type2105
- 8090/8110/8135 *2
- C2408/C2524/C3210/C2532
- C2525/C3030 *2
- C2820/C3224/C3828
- C2410/C3210e
- C2824/C3528/C4535
- C3535/C4540 *2
- C6045/SDC555
Printers
- SLP26/SLP26n
- MLP26/MLP26n
- MLP25/MLP25n
- MLP28/MLP28n
- SLP32
- MLP32/MLP35n
- MLP45
- MLP145 *2
- CLP1620
- CLP22
- CLP1036
- SLP38c
- CLP28
- CLP35
- CLP17
- CLP18
- CLP831
- CLP26DN
- CLP27DN/CLP31DN *2
- MLP75n
- MLP175n *2
- CLP128/CLP135
SAP device types ZA001vvv (Latin-1)/ZA002vvv (Latin-2)
These device types support the above-mentioned printers and multi-functional devices. You can download them from the Internet sites listed under "Support".
Latin-1 (Western Europe) supports the following languages:
English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Norwegian, Danish, Finnish
Latin-2 (Eastern Europe) supports the following languages:
Hungarian, Polish, Czech, Croatian, Romanian, Slovak, Slovenian
The ZA001vvv/ZA002vvv device types support the following functions:
Input bin / Output bin
Stapling & Hole punching
Paper type
Duplex printing
Job offset
Resolution
Number of Copies & Collation
EconoMode / Toner saving
Auto tray change/switching
Edge enhancement/Smoothing
Paper size
Orientation
Character set / Symbol set
Color printing
Slip sheet
Edge-to-edge mode
*1: Does not support bar code printing and OCR typefaces.
*2: Supports Unicode printing.
For more information, download the customer documentation from the Internet sites listed under "Support".
Support:
Telephone: 1-800-RICOH(74264)-38
Internet: http://www.savin.com/
Download: http://www.savin.com/savin/savin_com.nsf/SupportDrivers/

Device type for HP Officejet 7700

Good Day;
I have a problem with SAP priniting on HP officejet 7700(color All in one). Its not printing with SAPWIN default . I used device type HP laser jet 1160 and its printing fine( only black and white).
I am looking to get the colour print out. I have searched for getting the matching device type for this printer , and am not winning.
I have the SAPNOTE mentioning the list of SAP supported printers and device type , this printer is not in the list.
Your help is highly appreciated .
Regards
Seethy

Hi ;
I tried to create a device type using SPAD and just copy the parameters and print controls from other device type HP laserget 1160. But its not working. Should I copy the drivers from OS level? Please assist me in creating a new device type.
Your help is much appreciated.
regards
seethy

Device type and print options

Hi all,
The device type HP LJ 4350 enables print options and allow us to set which paper tray is to used in a specific form.
However, our usual supplier does not sell this device type anymore.
Does anyone know another device type that could allow tray configuration in the SPAD transaction?
Thanks for your help.

Hi,
Take a look at SAP note #1049778. For recent releases, the device type HP4350 should be already available in transaction SPAD n the system.
Also as per SAP note #1049778, most of the new device types that were developed within the SAP Printer Vendor program (SAP note #1130927) support the new print options.(see SAP note #1103422)
Regards,
Aidan

Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
on the 32 bit machines I was able to apply this hotfix
http://support2.microsoft.com/kb/2738898
But it will not install on 64 bit machines.
Is there a hotfix for 64 bit? If not, what is the work around?
Thanks!
Robert

Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Type the name and password of a user in the "(null)" group to allow this.

To connect to wifi while in the recovery partition, I'm asked to authenticate the wlan's certificate, and in order to do that I'm asked for "the name and password of a user in the "(null)" group" to make changes to the Certificate Trust Settings. Anyone know what or which user may this be?
I'm not able to pass from the initial apple screen when I boot, so I wanted to repair or reinstall Lion, but in order to do that I need to connet to the WLAN to download it.

Hi, I called Apple Support this day, and the answer is that enterprise WPA wireless is NOT supported by Lion Internet Recovery.
You can find the supported configurations and protocols on Apple site:
http://support.apple.com/kb/HT4718?viewlocale=en_US

CiscoWorks user options "device type groups|switch and Hubs"

Similar Messages

Maybe you are looking for