CK24 - mark and release with different costing version

Hi,
We are currently using standard costing variant PPC1 and costing version 1 to mark and release the standard costs. However when we try to recost the material cost due to price changes, system does not allow to mark & release revised standard cost if we try to mark & release on same day. pls note standard cost estimate is already released for the month. And we do not want to delete existing standard cost estimate. Instead we want to explore other options. We are using 4.7.
My questions are :
a) Can recost using costing version 2? CK11N allows to save the costing result. However in CK24 Marking allowance, system does not allow to change Costing Version. is there any config option to change this.
b) If we cannot use different cost version, can we update material cost with same costing variant (PPC1) and costing version (1) in this case. However when we tried to do recost with same costing variant & verison on same day, system gives an error 'Material AAAA in plant MMM has a released cost estimate.'
Any inputs on above issue highly appreciated.
thanks
Sunil

Hi,
While, you can use any of the Costing versions to mark & release Standard cost estimate, you can release Cost estimate only once in a fiscal period. If you want to release correct prices, then you have delete existing released cost estimates using CKR1 transaction and then re-run CK40N to release.
Hope this helps.

Similar Messages

Mark and release a new cost estimate in a different system than the one run

Hello all,
Here is my functionnal lanscape: in system A, I am managing all the stocks hence material master data.
In system B, I am managing production, financials and Controlling.
Hence, once I edit a costing run to have a new standard price in system B, how can I mark and release this new standard price for my material that is maintained in system A. Do you know any standard idoc for this purpose ?
Also, how will happen the stock revaluation.
regards,
Irène

hi
kindly check the link below:
http://help.sap.com/saphelp_40b/helpdata/fr/1a/0e3599539911d1898b0000e8322d00/content.htm
regards
eashwar

Product Costing - Two Costing Variants - Mark and Release In Same Company Code Same Period

Hi All,
We are currently handling a CO-PC project where client has requirement to use two different costing variants in the same period in the same company code. SAP standard does not allow use of two costing variants in the same period for the same company. We can have only One Costing Variant per Co Code for Marking / Releasing Standard Price.
There are some materials in Plant 1 or Plant 2 for which cost estimates using costing variant ABC1 calculated and than prices are marked and released (CK24), now same materials are received in Plant3 where mixed costing is used and thus need to have cost estimates from second costing variant ABC3 (second costing variant) marked and released. Object is to have ABC3 cost estimates in material master standard price field, but SAP does not allow to mark and release for second costing variant in the same period for same co code as ABC1 variant already ran for plant1 or Plant2 under same company code,therefore, business is not able update ABC3 prices in Standard price of the material master.
Purpose of this second costing variant mark and release run is that for some materials business would like to implement costing at Plant3 level also, where they get same materials from different production sites (Plants). At Plant3 level, business is using mixed costing where the standard price is a weighted Average standard price, taking the different production sites standard cost into consideration in combination of the volume split between those production sites.
Did any one worked on this kind of requirement? Is there any SAP standard way to handle? Or this will need some ABAP enhancement?
Kindly advise.

Hi Atul
1. You dont need separate Valuation Variant in Plant 3
2. Use Costing Variant ABC1 and ensure that it has the needed Valuation Strategies in Valuation Variant
Allow Complete Transfer in the Transfer Control i.e. Cross Plant Transfer in it
3. Assign the Qty Str Type you have used in ABC3, to ABC1.. i.e. In the Costing Version, assign the Qty Str Type to the Costing Type and Valuation Variant from ABC1
After this, do CK11N and CK24 for Plant 1
Then do CK11N and CK24 for Plant 3, using ABC1.. You dont need to change anythiing before doing CK11N for Plant 3
To make it simple, you can use any one of ABC1 or ABC3 in both the plants.. You only need to ensure that Valuation Variant, TRansfer Control are set up as desired
Br. Ajay M

Sales order Costing mark and release

Dear all,
Kindly help on the following issue:-
Can we mark and release Sale order costing like product costing(in CK24).
best regards,
Gaurav

Hi,
Sale order costing is determined by Requirement Class and Item category defined for MTO process in Product Costing.
Sale Order costing keeps changing when you compare normal costing with CK11n or CK40n.
Regards
Balaji

Regarding marking and releasing in CK24.

The customer has a direct delivery process as in they purchase finished goods and just sell them. Such a material is newly created under a plant.
In this case there is no in house production of that material and the price needs to be maintained manually in MM01. But the user has created a PIR for it and run CK24.
Now when I try to change the value of the std price using MM02 I am not able to.
how do I set the std price manually for this material after the CK24 run is carried out?

Dear Ajitha Koti,
check this,
1. A raw material's (Externally procured material)price can be captured either using a moving average
price or using a planned price or using a price change done in MR21.
2.Standard cost estimate are generally carried out for the Finished product and while doing the
calculation the system calculates the cost of the Semi-finished product or sub-assemblies.
3.Standard cost estimate will be carried out only once in a period for a product.
4.This can be done either using CK40N alone or else using CK11N for cost estimate and CK24 for
Marking and release.
5.Creating a PIR has no impact or no way related to costing.
so now check and come back with your queries.
Regards
Mangalraj.S

Delete Costing run - marked and released

Hi
I did one costing run which was marked and anolther costing run which was marked and released also.
I want to delete both the above.
Which transaction I can use for this and what is the implication of them ?

Hi NIkhitha,
CKR1 is the Tcode for Deletion of Cost Estimate as told by Ajay. However to add few implications and points to be reviwed before deletion.
1. Check whether it is really necessary to delete
2. Any Orders are being valuated by this Cost Estimate price
SB

Install CRS and RAC with different users

I' m tring to install CRS and RAC with different users.
It is supported but I don't find documentation.
Have someone experience with this configuration ?
My question are related to permission/own of voting and ocr file.
in this configuration is CRS owner or DB owner that run srvctl commands ?
Thanks !

Yes it is ... check out the RAC FAQ on metalink, and just as Chris metioned the users will need to have the oinstall group as their primary..
"Is it supported to install CRS and RAC as different users.
Yes, CRS and RAC can be installed as different users. The CRS user and the RAC user must both have "oinstall" as their primary group, and the RAC user should be a member of the OSDBA group.
Modified: 09-SEP-04 Ref #: ID-5769 "

How can I share applications and softwares with different users of the same computer?

First question: How can I share applications and softwares with different users of the same computer?
Second : Can I use 2 different I cloud accounts to synt 2 iphones with one computer?

Applications installed on the admin account are available to all user accounts unless Parental Controls are enabled.
Yes. Separate user accounts, help here > How to use multiple iPods, iPads, or iPhones with one computer

HT202879 I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?

I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?

I'm not sure what you mean by it making accessing files more complicated. I have both Pages 4.3 & Pages 5.1 icons in my Dock as well as Numbers 2.3 & Numbers 3.1. I continue to use the iWork '09 versions for my everyday needs. As long as the new versions are in your Applications folder & the '09 versions in the iWork '09 folder, Software Update will not have a problem updating them even if Apple should come out with a new update for the '09 versions.
Because I have moved the new versions to an external drive & renamed the apps because I want '09 to be the default apps, I do have to remember to move them back to my applications folder & restore the original names before updating. But since you like the new versions this "complication" doesn't apply to you.

Costing on Internal Orders with different plan versions

Hi,
Is it possible to carry out Costing on Internal Orders using different plan versions?
I would like to carry out more than one costing on Internal Order so that I could compare different versions. Maybe there are other parameters (other than plan versions) which can be used for executing different parallel costing.
Best wishes,
Karol

Hi Karol,
In Release 3.0, the following new planning functions are available in order planning:
<b>Copy plan versions</b>
In Release 3.0, you can plan order costs for internal orders in different versions. In contrast to earlier releases, you can now
1. change versions
2. copy versions
3. Here you can select :
the planned values to be copied: annual or total values
whether the planned values in the target version are to be retained or overwritten compare versions using the information system
Planned values are not revaluated in the target version (for example, when you change the value date).
Overhead and settlements are not copied and, if required, must be repeated in the target version
Regards,
Hemachandra K S
<b>Please, donot forget to mark the answer as Helpful, Very Helpful or Problem solved.</b>

Access two EAS with different Essbase versions and different java versions from the same p.c.

Hi,
I need to regularly access Essbase 11.1.2.2. and Essbase 11.1.2.3 EAS from the same client machine.
They are on, and must be on, different versions of java, is there a way to have both versions of java installed but each using the correct version and without the two java versions causing any kind of problems?
thanks,
Robert.

Hi Robert... I assume this is web-launched?
I spent a day or so trying understand the intricacies of the JNLP protocol and create shortcuts that will invoke web-launched EAS with the appropriate version of Java. I can get one version of EAS to use the 1.6 Java Web Launcher, and the other version of EAS to use the 1.7 Java Web Launcher - but both Web Launchers eventually invoke the same version of Java! There are switches in the JNLP syntax that seem like they should allow you choose the actual Java version that gets invoked, but I just could not make it work.
You can use the Java Control Panel (in Control Panel) to enable and disable the relevant versions before launching EAS.
If you find otherwise I would love to know (or if you find out how to control which versions are enabled or disabled via command-line script).

Mark and release

Hi All,
I have a cost estimate which has been marked in my previous period i.e 'VO' . During this period if I try and release that material will it pickup the already marked cost estimate of previous close?
Please reply ASAP.
Points will surely be rewarded for helpful answers .

Hi,
You say that there are around 10000+ materials which means there will be definetly some material price changes. If you go ahead and released the cost estimates which are marked earlier, then these price changes will not be taken into effect. It is better to re-calculate the estimates and then release it.
Coming to the quantum, this is not at all a problem in CK40n with a background job to recalculate and release the prices.
Good Luck!!!!
Thanks and Regards,
Bhuvaneswari.S

Live Migration with Different CPU versions on the hosts, win 2012R2 Datacenter

Hello
This question have been asked in different forums but when I read the the thread's I feel that I get mixed answers.
And most answers are dating from 2012 (Win 2008R2), I don't know if they are still correct in win 2012R2.
So now I ask the question myself and hope to get at clear answer :)
We are in the process of installing a new Hyper-V cluster using Win srv 2012 R2 Datacenter as OS.
I'm planning to re-use some of the "old" servers from our current Hyper-V 2008 R2 cluster, removing it from the cluster and do a clean installation of 2012R2 Datacenter.
But I will need to buy two new servers to manage this (with a new version of CPU, same brand (AMD))
Old server: AMD Opteron(tm) Processor 6172 (12 Cores)
New server:
AMD Opteron™ 6344 (12-core)
Now my question:
Will Live Migration work between these servers in my new cluster without me doing any special settings in hyper-v or in the VM or what do I need to do to get this to work?
/Anders

Hi,
It is important that all the hardware supporting Windows Server 2012 Failover Clusters be certified to work with Windows Server 2012.
In a cluster where all the nodes of the cluster are exactly the same, hardware migration is fairly straightforward. There are no concerns about differences in hardware, and
especially no concerns about different capabilities of the CPUs.
More information:
When to Use Processor Compatibility Mode to Migrate Virtual Machines
http://technet.microsoft.com/en-us/magazine/gg299590.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Shared Listener with different oracle versions

Hi,
I have configured the following shared listener for two databases running with different versions.
I have started the O02TXN3-9i along with the shared listener and then listener was started with 9i version and then I brought up the O01TXN3 -10g.
Please let me know whether I can connect to the 10g database O01TXN3 remotely with shared listener.
Note: Please find listener and oratab files below.
Your early response is much appreciated.
Database O01TXN3 with 10g
Database O02TXN3 with 9i
==== Listener.ora File ======
TNS_DTXN03 =
(ADDRESS_LIST =
(ADDRESS=
(PROTOCOL=IPC)
(KEY= O01TXN3.world)
(ADDRESS=
(PROTOCOL=IPC)
(KEY= O01TXN3)
(ADDRESS=
(PROTOCOL=IPC)
(KEY= O02TXN3.world)
(ADDRESS=
(PROTOCOL=IPC)
(KEY= O02TXN3)
(ADDRESS =
(COMMUNITY = tcpcom)
(PROTOCOL = TCP)
(Host = dtxn03)
(Port = 1525)
STARTUP_WAIT_TIME_TNS_DTXN03 = 0
CONNECT_TIMEOUT_TNS_DTXN03 = 10
LOG_DIRECTORY_TNS_DTXN03 =/dtxn03/txn/oracle/admin
TRACE_LEVEL_TNS_DTXN03 = OFF
SID_LIST_TNS_DTXN03 =
(SID_LIST =
(SID_DESC =
(SID_NAME = O01TXN3)
(ORACLE_HOME = /dtxn03/txn/oracle/10.2.0-64)
(SID_DESC =
(SID_NAME = O02TXN3)
(ORACLE_HOME = /dtxn03/txn/oracle/9.2.0-64)
# Added to get rid of the "inbound connection timed out (ORA-3136)"
INBOUND_CONNECT_TIMEOUT_TNS_DTXN03 = 180
==
Oratab:
#LISTENER:/dtxn03/txn/oracle/9.2.0-64
O01TXN3:/dtxn03/txn/oracle/10.2.0-64:Y
O02TXN3:/dtxn03/txn/oracle/9.2.0-64:Y

As a general rule, only one listener is required for a machine as long as all database versions are currently supported. (In other words one listener for Oracle7 and Oracle11g will not work.)
As a general rule, an old listener MAY not be able to handle the features of the newer database (such as transferring blobs was a limitation in Oracle8). Therefore use the newest listener to handle all the databases.
As a general rule, listeners can be considered independent of databases in a sense similar as ASM. Therefore it's not a bad idea to have a separate ORACLE_HOME specifically to install the listener. This is especially useful if you have multiple databases with differing service level agreements,
I'd want to see
1) the output of lsnrctl status
2) any console session stuff and copy/paste to be surrounded by preview tages as described in the FAQ (http://www.oracle.com/technology/forums/faq.html#q14)

After the latest update, I no longer have control with MSN. I would like to take this latest version off and replace with the older version. How do I do that?

After loading the latest version of Firefox, I no longer have any control in setting up my MSN window which is my home page.

hello dawn, please be aware that there are malicious websites out there which will trigger fake update notices/popups which try to trick you into downloading software bundled with adware. please never click on such websites or execute such files on offer - updates are handled automatically by firefox and you don't have to download any file for it (you can always manually check if you're up-to-date by going to ''firefox > help > about firefox'').
please try these steps to regain your firefox:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to firefox > addons > extensions and in case there are still extensions listed there, disable them.
# go to the windows control panel and remove all software recently installed where you don't know which purpose it has or otherwise looks suspicious.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

CK24 - mark and release with different costing version

Similar Messages

Maybe you are looking for