Clarification on post upgrade Statutory requirement
The post steps of the R12 upgrade say to "Apply latest HRMS Legislative Updates" by referring to note 145837.1. This note shows the latest stautory patch for 12.1.3 to be Dec 2010. In our 11i instance we have already applied through "US & Canada End of Year 2010 Statutory Update Phase3 for 11i " prior to the upgrade. I'm assuming that we would apply this EOY Phase 3 patch for 12.1.3 and not the base level statutory in note 145837.1. Is this a correct assumption? Thanks!
Your assumption is correct. However, you still need to refer to Doc 145837.1 in case you need to apply the latest HRMS Legislative patches if you have HR/Payroll implemented and installed.
Thanks,
Hussein
Similar Messages
-
Required Post Upgrade Jobs: Missing jobs and failures
Folks,
In reviewing "Required Post Upgrade Jobs", I found that "Compile Non-Compiled Flexfields" failed. The job was submitted by APPSMGR and immediately started since the Request Process queues were not initially deactivated as reccomended in doc 399362.1. I'm afraid I don't know the password for APPSMGR. Is there a way for me to restart this job so that any successors release?
Only a handful of the required jobs show to have been submitted and run. Would required jobs that have not run and do not appear in the queue need to be manually submitted?
Thanks for any help.All of my post upgrade processes completed without error except the flexfield compile of AR_ADJUSTMENTS_ALL_DFV. It will not compile from within the forms either:
Oracle error 911: ORA-00911: invalid character
ORA-06512: at "SYSTEM.AD_DDL", line 165
ORA-06512: at line 1 has been detected in afuddl() [3_xdd].
do_ddl(APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): private_do_ddl(APPS, APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): do_cd_view(1, APPS, 2, AR_ADJUSTMENTS_ALL_DFV, $statement$): : do_apps_ddl(APPS, $statement$): : substr($statement$,1,255)='CREATE OR REPLACE VIEW AR_ADJUSTMENTS_ALL_DFV
(ROW_ID, "CONTEXT_VALUE", AdjustmentStatus,
CONCATENATED_SEGMENTS)
AS SELECT ROWID, ATTRIBUTE_CATEGORY, ATTRIBUTE4,
ATTRIBUTE4
FROM AR_ADJUSTMENTS_ALL'
View Name: AR_ADJUSTMENTS_ALL_DFV
I am going to apply 5484000 Oracle E-Business Suite 12.0.2 Release Update Pack (RUP2) tonight and see if it makes any difference. -
12.1.1 POST-upgrade ---verify concurrent process
I have upgraded 11.5.10.to 12.1.1 successfully when I was running post upgrade
Oracle® Applications
Upgrade Guide
Release 11i to 12.1.1
Part No. E14010-01
chapter 4
Step 1: Verify completion of concurrent programs (recommended)
The upgrade process creates numerous concurrent program requests. Once you bring
up the application tier, these programs run automatically to complete tasks such as data
cleanup and upgrades to historical data, among others. You can run these programs in
the background, while your system is up and running and users are active, unless
otherwise instructed in the product-specific sections of this book.
Before you continue, be sure all the concurrent programs generated by the upgrade
have run successfully. In the Required Post Upgrade Jobs section of E-Business Suite
Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the
distinct concurrent programs included in the upgrade process. The Best Practices
section includes a recommendation on how to isolate these programs (and all their
executions) into a separate concurrent manager queue, which you can use for
processing.
post upgrade concurrent request were around 989 but
by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
then after some time I shut abort the database
please tell me what should I do now
what impact will cmclean and shut abort will have ?
how do i know which request are clean by cmclean
and how can I ran them again??
Immediate reply is appreciated
AppsmastI
SHaring Is CArinGpost upgrade concurrent request were around 989 but
by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
then after some time I shut abort the database
please tell me what should I do now In the Required Post Upgrade Jobs section of E-Business Suite Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the distinct concurrent programs included in the upgrade process.
what impact will cmclean and shut abort will have ?cmclean.sql script should not have any impact on the concurrent programs, however shutdown abort will do the following http://docs.oracle.com/cd/E11882_01/server.112/e10595/start003.htm#i1006611
how do i know which request are clean by cmclean In the same session you will find the list of table that are updated by cmclean.sql script along with the request ids.
and how can I ran them again??See the doc referenced above.
Thanks,
Hussein -
Solve oracle multimedia post upgrade errors
Hello,
I performed and out of place upgrade from oracle 10.2.0.4 to 11.2.0.4.
when I run the postupgrade script i have issues on oracle multimedia that i cannot solve.. it is about shared memory. I followed all the recommendations suggested on the pre-upgrade script.
SQL> @/oracle/product/11.2.0.4/dbhome_1/rdbms/admin/utlu112s.sql
Oracle Database 11.2 Post-Upgrade Status Tool 10-03-2014 15:06:57
Component Current Version Elapsed Time
Name Status Number HH:MM:SS
Oracle Server
. VALID 11.2.0.4.0 00:14:07
JServer JAVA Virtual Machine
. VALID 11.2.0.4.0 00:11:08
Oracle Workspace Manager
. VALID 11.2.0.4.0 00:00:48
Oracle Enterprise Manager
. VALID 11.2.0.4.0 00:09:58
Oracle XDK
. VALID 11.2.0.4.0 00:02:48
Oracle Text
. VALID 11.2.0.4.0 00:00:59
Oracle XML Database
. VALID 11.2.0.4.0 00:05:45
Oracle Database Java Packages
. VALID 11.2.0.4.0 00:00:20
Oracle Multimedia
. ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 32 bytes of shared memory ("shared pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. col#, grantee#, privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 136 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512:
at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-04031: unable to allocate 136 bytes of shared memory ("shared
pool","select i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds:
qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-04045: errors during recompilation/revalidation of
ORDSYS./f87ac59f_DicomEngine
ORA-04031: unable to allocate 32 bytes of shared
memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. ORDSYS./f87ac59f_DicomEngine ORA-04031: unable to allocate 32 bytes of
shared memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
. ORA-06512: at line 14805
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
. INVALID 11.2.0.4.0 00:55:05
Spatial
. OPTION OFF 10.2.0.4.0 00:00:00
Oracle Expression Filter
. VALID 11.2.0.4.0 00:00:16
Oracle Rules Manager
. VALID 11.2.0.4.0 00:00:14
Final Actions
. 00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
thank you
Mario.I explicity set up the sga_target to 668MB as suggested by the pre-upgrade script.
see the output of preugrade tool:
SQL> @/oracle/utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 10-02-2014 17:24:25
Script Version: 11.2.0.4.0 Build: 001
Database:
--> name: FUELPLUS
--> version: 10.2.0.4.0
--> compatible: 10.2.0.3.0
--> blocksize: 8192
--> platform: Solaris Operating System (x86-64)
--> timezone file: V4
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 1071 MB
--> UNDOTBS1 tablespace is adequate for the upgrade.
.... minimum required size: 400 MB
--> SYSAUX tablespace is adequate for the upgrade.
.... minimum required size: 804 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 60 MB
Flashback: OFF
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 484 MB
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 668 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> cursor_space_for_time 11.1 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> cursor_space_for_time 11.2 DEPRECATED
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Oracle Workspace Manager [upgrade] VALID
--> EM Repository [upgrade] VALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [upgrade] VALID
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
--> Data Mining [upgrade] VALID
--> Expression Filter [upgrade] VALID
--> Rule Manager [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER PUBLIC has 1 INVALID objects.
WARNING: --> EM Database Control Repository exists in the database.
.... Direct downgrade of EM Database Control is not supported. Refer to the
.... Upgrade Guide for instructions to save the EM data prior to upgrade.
WARNING: --> Your recycle bin is turned on and currently contains no objects.
.... Because it is REQUIRED that the recycle bin be empty prior to upgrading
.... and your recycle bin is turned on, you may need to execute the command:
PURGE DBA_RECYCLEBIN
.... prior to executing your upgrade to confirm the recycle bin is empty.
WARNING: --> JOB_QUEUE_PROCESS value must be updated
.... Your current setting of "10" is too low.
.... Starting with Oracle Database 11g Release 2 (11.2), setting
.... JOB_QUEUE_PROCESSES to 0 causes both DBMS_SCHEDULER and
.... DBMS_JOB jobs to not run. Previously, setting JOB_QUEUE_PROCESSES
.... to 0 caused DBMS_JOB jobs to not run, but DBMS_SCHEDULER jobs were
.... unaffected and would still run. This parameter must be updated to
.... a value greater than 48 (default value is 1000) prior to upgrade.
.... Not doing so will affect the running of utlrp.sql after the upgrade
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
EXECUTE dbms_stats.gather_dictionary_stats;
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SQL> SPOOL OFF
here are the last 100 lines of upgrade.log
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
. ORA-06512: at line 14805
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
. INVALID 11.2.0.4.0 00:55:05
Spatial
. OPTION OFF 10.2.0.4.0 00:00:00
Oracle Expression Filter
. VALID 11.2.0.4.0 00:00:16
Oracle Rules Manager
. VALID 11.2.0.4.0 00:00:14
Final Actions
. 00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
SQL>
SQL> SET SERVEROUTPUT OFF
SQL> SET VERIFY ON
SQL> commit;
Commit complete.
SQL>
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL>
SQL>
SQL>
SQL> DOC
DOC>#######################################################################
DOC>#######################################################################
DOC>
DOC> The above sql script is the final step of the upgrade. Please
DOC> review any errors in the spool log file. If there are any errors in
DOC> the spool file, consult the Oracle Database Upgrade Guide for
DOC> troubleshooting recommendations.
DOC>
DOC> Next restart for normal operation, and then run utlrp.sql to
DOC> recompile any invalid application objects.
DOC>
DOC> If the source database had an older time zone version prior to
DOC> upgrade, then please run the DBMS_DST package. DBMS_DST will upgrade
DOC> TIMESTAMP WITH TIME ZONE data to use the latest time zone file shipped
DOC> with Oracle.
DOC>
DOC>#######################################################################
DOC>#######################################################################
DOC>#
SQL>
SQL> Rem Set errorlogging off
SQL> SET ERRORLOGGING OFF;
SQL>
SQL> REM END OF CATUPGRD.SQL
SQL>
SQL> REM bug 12337546 - Exit current sqlplus session at end of catupgrd.sql.
SQL> REM This forces user to start a new sqlplus session in order
SQL> REM to connect to the upgraded db.
SQL> exit -
BW upgrade - pre and post upgrade reports
Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license. Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport. Any thoughts here please. If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
KalyanI re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan -
From today's morning , We are having Issue on Our Online SharePoint Site.
Each WebPart is not loading and displaying this Line
Unable to load type Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException required for deserialization.
Please write in quick response to fix it at
[email protected]Hi,
According to your post, my understanding is that SharePoint Online Site was unable to load web part and got the “Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException” error.
Per my knowledge, the SPUpgradeCompatibilityException occurs during upgrade when the front-end Web server attempts to connect to an incompatible database.
Please check whether the database is compatible.
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Do i have to do post upgrade steps using DBUA or it will be done by the utility.
Thanxs in advanceI don't think you need to. The post-upgrade scripts are only required when choosing to do the upgrade manually.
-
ASU-process POST Upgrade Step on SQL database
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
VinayHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Upgrade step ASU-process post upgrade step
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PMHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
EJB references post upgrade from 8.1 to 10.3
Hi,
I have an application.xml file in META-INF directory of the EAR file. It has the below reference:
<module>
<ejb>content.jar</ejb>
</module>
<module>
<ejb>content_repo.jar</ejb>
</module>
<module>
<ejb>netuix.jar</ejb>
</module>
<module>
<ejb>p13n_ejb.jar</ejb>
</module>
<module>
<ejb>prefs.jar</ejb>
</module>
<module>
<ejb>wps.jar</ejb>
</module>
Post upgrade I accidentally packaged an EAR without above references in application.xml and without actual jars in the EAR file. The application seemed to be running fine, did not test it completely though. Do we really need these jar files? I had upgraded this application from 8.1 to 10.3 using upgrade tool in workshop. This is a portal based web application. Also, what is the purpose of these libraries? Could these be automatically added by the upgrade tool to the weblogic.xml.Hi Srini,
it supports but you need to upgrade correctly.
follow this link
Beehive Applications
after upgrade if you found some error like classnotfound error.
If those are the errors you were also experiencing, then please follow one of these options to resolve this issue:OPTION
1:Identify all the JARs that contain the beehive classes and explicitly add the jar files to the classpathOPTION
2:When you created the domain (if you used the Config Wizard), do you make it a "Workshop" domain? If not, try that.That should deploy the Workshop framework (Beehive controls, NETUI, etc) libraries as shared libraries. Then these libraries should be referenced in your applications weblogic.xml and weblogic-application.xml.
regards,
Kal -
HI All,
We have recently done the Upgrade from BW 3.1 to BI 7.0
There is a issue regarding the POST Upgrade
One Job is failing every day
The name of the JOB is BI_WRITE_PROT_TO_APPLLOG
And the Job log is
06/18/2008 00:04:55 Job started 00 516 S
06/18/2008 00:04:55 Logon of user PALAPSJ in client 200 failed when starting a step 00 560 A
06/18/2008 00:04:55 Job cancelled
00 518 A
This Job is actually running the program
RSBATCH_WRITE_PROT_TO_APPLLOG
when i try to run this program with my user id its working
but with the other user id which it is schedule its failing giving the messages as mentioned in the job log
Kindly suggest me
REgards
janardhan KMaybe it's a dialog and no system or background user. so the job fails.
Regards,
Juergen -
Post-upgrade tasks for OWB 10g Release 2
Hi,
we're planning to upgrade from OWB 10.1.0.2 to 10.2.x.
Now, I'm trying to get a clear view on what will be the "post-upgrade" tasks, in terms of manual adaptations, corrections, etc. to get everything back up and running after the upgrade ...
E.g. : by means of test al already exported a dimension, and imported it in the 10.2 repository ... Turned out that in the pre-10.2 version, there were no validation problems, but as from 10.2 (although the upgrade and import were successful), I got 19 warnings and 2 errors ... because each level needs to have a business or surrogate key ...
It' s things like that I'm especially interested in, in order to determine the workload after the upgrade ...
So, feel free to share your experiences ; I'm looking forward to read them!
Thanks!
Grtz.Here are some from my list. I stopped maintaining it a while ago, we have lots more where this came from. Some of it also apply to older versions of OWB.
Key lookup You are to choose input and output attributes BEFORE being able to choose loookup table, all in a time consuming wizard
Expressions Copy and paste into expression editor, validation fails for expressions using lowercase (such as "upper" or "substr")
Renaming attributes Not possible anymore, you need to open details
Adding a table component You must browse in a tree structure (time consuming), not search functionality anymore
Import Import converting from 9.2 hangs after 15% in about 10% of all imports
Import Some mappings are not possible to import, a total rewrite is necessary
Deployment You can only deploy about 5-10 times before you need to restart OWB
Memory leak If something goes wrong in OWB, memory is never cleared - JAWAW.exe needs to be removed manually from memory
Import Importing mappings one by one (as this is sometimes needed due to OWB), the last directory used is OF COURSE not default when importing the next time
OWB GUI / mapping editor When working with components in the mapping editor, an object hidden behind the object you are actually working with is selected prior to the object in visual focus to the user
BUG! Urgent: CASE - wrong generated Code
ANSI JOINS Remove ANSI-SQL from mapping configuration, otherwise (+) outer joins will not work
Transformations Not possible to enter a transformation such as "sysdate", you must find it in a huge tree structure list (no search available) -
Upgraded my iTunes to the latest version and upgraded my iPhone 3gs to IOS5. Unable to sync my iPhone with iTunes after upgrade and is getting stuck on Step1. I am running my iTunes on Windows Vista PC and have tried the solution of netsh winsock reset and still no luck.
Also, I am not able to see any of my music on the phone post upgrade, but it shows on iTunes. Again not sure on how to make it appear on my phone. Any help would be much appreciated!!
Cheers,
Kishoremy advice to you is to SWITCH TO SOMETHING BESIDES "VISTA"!!!!!!!!!!!!!
-
Audio Tracks on my iPhone stopped working post upgraded to iOS 5.
Audio Tracks on my iPhone stopped working post upgraded to iOS 5.
Quiet a lot of my tracks do not play on my iPhone 4 after I upgraded to iOS 5. The the seeker bar does not progress and it looks stuck.
Could someone please help.
Regards,
S!dHi !
I am currently having the same problem, since I upgraded my iPhone 4 to iOS 5, many tracks don't work. They were working before. Some are working but half isn't.
Tried to restore, remake playlist, delete every tracks et put them back. Same prob.
Please help !
Regards,
Rom -
SLA Pre- upgrade programs and process and SLA Post upgrade
Hi Guys
Can anybody please let me know what are the SLA Pre- upgrade programs and process we have to run and SLA Post upgrade process and programs.
Thanks
AjeeshPl post details of OS and EBS versions. Pl see if MOS Doc 604893.1 (R12: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch) can help
HTH
Srini
Maybe you are looking for
-
Error Message - No storage space available for extending an internal table
i have written this code where i think there is a performance issue as well. Error - You have attempted to extend an internal table but the required space was not available. IF GT_OUTTAB IS NOT INITIAL. SELECT ZRMVIEW~ARBPL ZRMVIEW
-
Issue with Info Object Transport after changing Data Type
Hi Experts, We have a DSO which is running past 5 years. And recently(3 days back) we added new fields into that DSO. Delta loaded for last three days and new info object (Say XXX) data populated into DSO. Now the problem is, We identified that, info
-
Title frame in the .Mac Web Gallery
Hi there... I have a movie which I've published to the Web Gallery in iMovie '08. The first couple of seconds of the video is a black screen as there's a music intro. My problem is that due to this black background the preview on the Web Gallery is b
-
Hi All, How can we see the underlying functionality for RRI queries. Here I am using an existing query in my company,after execution i can have the option of going to another report. I am not able to find how the two reports are conncted. My work is
-
How to save customised fields in standard table MARA by using MM17
I have customised fields in MARA table. I want to save the data in database by using Mass transaction MM17. Can any one can give the solution.