CLD, +MATLAB/SIMULINK/C/C++/VB/ETC, Control systems and robotics, M.Sc., happy to gain worldwide experience, located in Canada

Hi,
  My name is Morteza Heydari Araghi. I am a Mechatronics Engineer (studied Electrical Engineering during BS and MS, but also worked on Mechanical and Mechatronics projects), and am currently looking for a job that matches my skills. I am willing, and actually happier to relocate, and gain worldwide experience. I would prefer Canada, the US and europe, however I would need a work permit if anywhere outside Canada. I am a self-motivated and focused engineer who sets his goals and works very well in a team to achieve them. Some highlights of my qualifications include:
Studied Control Systems and robotics for 8 years.
Certified LabVIEW Developer. Used LabVIEW for about 6 years.
Worked with NI vision builder for machine vision applications.
Designed several machine vision systems for industrial purposes
Worked with real-time and/or embedded systems for more than 5 years.
Worked with some professional programming software packages, including C/C++ language, VB, MATLAB, NI LabView, SolidWorks, etc.
Worked with actuation and measuring systems in the sense of design, automation, instrumentation, and robotic applications.
Finding innovative solutions for highly competitive studies. Sharp in understanding new concepts.
Should you like to discuss further, please contact me at mheydari  at  alumni.uwo.ca
Best wishes,
Morteza

Respected sir/madam,
i am surendra babu.now i am looking for a job
and i have one year experience in LABVIEW.
                        Herewith i have attach my resume.Please take a look.
if u find any openings on LABVIEW please forward my resume.
Thanks & Regards,
Surendra babu Pidikiti
Attachments:
RESUME-SURENDRA.doc.docx ‏42 KB

Similar Messages

  • Can i know the differences between distributed control system and plc

    also i needto know about the various functional units in a gas based co-gen plant

    Wide open question with a lot of grey area.
    Basically:
    A plc is told to go and it does it thing until either a predetermined set of conditions is met or somebody pulls the plug on it.
    Distributed control can be made up of a group of plc's communicating to a supervisor that can cause interaction with various plc's process controllers etc.
    Typically, the supervisor will "download" operating parameters to the distributed units ie set points....
    The unit is then responsible for achieving that setpoint.
    This is very generic. Can you be more specific?

  • Budget control system and former budgeting

    Dear All,
    Can anyone tell me the main difference between former budgeting and BCS.
    Kind Regards,
    Rajini.

    Hi,
    BCS is more flexible solution with much more firendly interface and many features in term of availability control. http://help.sap.com/saphelp_erp60_sp/helpdata/en/a6/17f53b9f150248e10000000a11402f/frameset.htm
    Regards,
    Eli

  • Recent graduated Control-Systems (embedded) enginneer, with experience in France/lebanon/Switzerland Looking for a Job With Labview

    I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
     Master’s grade of “Electrical and control systems engineering”.
    I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
    Salim DARWICHE
    1 rue antonin artaud
    31320 castanet tolosan
    Tel: 0033.6.85485107
    Email : [email protected]
    Nationalities :
    - French
    - Lebanese
    Date and place of birth:
    April 18, 1986
    Toulouse,
    France
    Education
    2009
    Master in Electrical and Control Systems Engineering
    Option Embedded
    systems
    University of technology of Belfort-Montbliard france
    2006 University
    Diploma in Industrial and Maintenance Engineering
    DUT Degree Equivalent to 3 years of
    technical studies
    Institute of technology of Saida
    Lebanon
    Experience
    February
    July 2009 Galley-Technologies (Neuchatel-Switzerland)
    Mission:
    Development of
    Labview Modules for Pharmaceutics and Robotics
    industries
    Realization(s):
    Communication and data-Analyse Software using
    TCP/IP:
    - Development of a software (Labview Programming) that would permit data
    transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
    the conformity of the final products.
    5 Axis robot simulation software:
    Concept and development of simulation tool for a robot working cycle
    September 2007
    February 2008 Valeo VSS (Paris France)
    Mission:
    Qualification and management of
    automobile electronic components
    Qualification of specific electronic components
    Making sure that all electronics components will be qualified on time before the
    Start-of-Project
    - Discussion between me, Valeo supplier and Valeo Project Manager in order
    to grant Valeo quality standard Specifications or to approve supplier deviations.
    Management of electronic qualification documents on Valeo ePLM system.
    - Participating to
    daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
    Act)
    Management of Valeo DSA products under IMDS Base
    - Management and
    declaration of Valeo Division Systems Access products under IMDS base (international Material
    data systems)
    - Creating MDS sheets then sending them to Automobile
    Constructors.
    February June 2006 United-Group Machinery
    (Beirut-Lebanon)
    Mission:
    Renovating a bag-filling
    machine
    Realization(s):
    Mechanical system
    - Drawing all parts of
    the machine (3D), assembly and motion using Autodesk Inventor.
    - Unmount, replacing bad
    parts then assembly of the machine.
    - Integrating of a weigher machine to the top of the
    bag-filling machine.
    Control system
    -Removing old control system and
    integrating a PLC and a control panel
    -Programming the PLC (Delta type) with Ladder
    diagram.
    Knowledge
    Languages
    French
    and Arabic: Native languages.
    English: fluent, TOEIC 890/990 Test of English for
    International Communication.
    Spanish: Intermediate.
    Automation
    - Labview,
    Matlab Simulink
    -Programming DSP Controller TMS320LF2407.
    -Programming in languages:
    assembler, C.
    - PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
    Grafcet-
    -Controlled systems: Continuous aspect
    Electronics
    -Programming in
    VHDL.
    -Programming of PIC 16F87X.
    -Simulation (Simplorer, Circuit maker, Electronic
    Workbench, Proteus, Kicad).
    Electrical
    - Machines D.C. current, synchronous,
    asynchronous, electrical supply networks.
    Various
    - CAD: AutoCAD, Autodesk
    Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
    Fagor).
    -CAM: Ms-Project (Gantt, Pert, Kanban) 
    Message Edité par salimo le 11-04-2009 04:35 PM
    ~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
    **The Best Way To Predict**The**Future Is To Invent It**
    Attachments:
    CV_Salim_Darwiche_S_12_10_09.doc ‏77 KB
    CV_SalimDARWICHE_EN_S.doc ‏229 KB

    Message Edité par salimo le 11-04-2009 04:36 PM
    ~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
    **The Best Way To Predict**The**Future Is To Invent It**

  • Integrating with external access control system

    Hi,
    I am new at the network but have read a lot recently about the above subject as much as I could. However, I am a bit mixed up at something. I understand in order to update SAP HR module with employees time and attendance logs I need to interface with a certified PDC interface => (SAP ECC - PLANT DATA COLLECTION - TIME & ATTENDANCE AND EMPLOYEE EXPENDITURES (HR-PDC)
    I wish to develop a system that updates the the SAP HR with employee attendance logs. In addition I also wish enroll new employees into my access control system database by polling the SAP HR database.
    Now my question is if I use .NET connector:
    1. Does the connector it include functions that can help with the above requirements?
    2. Is the use of PDC interface here still a must?
    Thanks

    For time management with the help of transaction pt80 you can download the information about employees with the help of idoc. And there are some programs a.k.a connectors that link access control systems and SAP so that you do not hire the same employee in the access control problem. You hire the employee in SAP and SAP sends the information (HR Minimaster DATA) to the related program.
    It is also do the same thing for the employees who resign. I mean if an employee is fired or resigned from the company than it is sent to the related system.
    These can be found under PDC integrated systems. You can find information about the systems from Ecohub. http://ecohub.sap.com/
    I hope this answer will help.

  • Issue using microsoft tfs as version control system with jdeveloper 11g

    Hi ,
    I am using TeamFoundationServer as source control system and trying to use Jdeveloper with TeamVCS Extension.
    Software Details :
    Jdeveloper Version : Studio Edition Version 11.1.1.6.0 Build JDEVADF_11.1.1.6.0CLOUD_GENERIC_121118.1600.6229
    Versioning Support for Team System - oracle.jdeveloper.vsts     11.1.1.6.38.62.29     
    Steps followed :
    1. Install the Microsoft Visual Studio Team Explorer 2010 ( http://www.microsoft.com/en-in/download/details.aspx?id=329 ).
    2. Install upgrade for Version Support for Team System using CheckForUpdates in Jdeveloper Help Menu.
    3. Now create a workspace in TeamExplorer and get the latest version of code.
    4. Click connectToTeamSystem in Versioning->Team System.
    5. Click Set workspace .
    6. Now open the Application .
    Issue : Checkin Checkout and other options are still grey out.
    Error : No error message in log.
    Additional Note : I tried doing the same steps on 11.1.1.7.0, and even there it doesn't work.
    Please help !!!!
    Thanks,
    Rajdeep

    JDev 11g support TFS 2008 - http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html#Source_Control_Systems

  • SRM 7.0 for Public Sector integrated with FM (Budget Control System)

    Hello!
    I'm starting an implementation project of ERP 6.0 and SRM 7.0 for Public Sector.
    It would be necesary the integration not only SRM with ERP but with FM (Fund Management), with BCS (Budget Control System) specifically.
    Is it possible? has anyone experience on it?
    Thks so much in advance and best regards!
    Marcela.-

    Hi,
    Certainly... If you have FM implemented in your project, you will have to make integration with SRM.
    I did it some 3 years ago and it was quite problematic (a lot of notes were created by SAP on this matter, also as initiative from our project), but since then, I assume, it should not pose specific problems.
    Regards,
    Eli

  • Integrating SAP HCM with third party Access Control System

    Hi Experts,
    We have client using SAP HCM and intend procuring an Access Control Solution to manage her people.
    What the client wants to avoid though is having to create a new employee in SAP HCM and manually creating same in the Access Control Software. Is there a way this can be automated such that upon recruitment of new staff, the data is updated in the Access Control DB which uses MS SQL? If this is possible, what is required to get this working well.
    Thanks for your support in this regard.
    Regards
    John

    For time management with the help of transaction pt80 you can download the information about employees with the help of idoc. And there are some programs a.k.a connectors that link access control systems and SAP so that you do not hire the same employee in the access control problem. You hire the employee in SAP and SAP sends the information (HR Minimaster DATA) to the related program.
    It is also do the same thing for the employees who resign. I mean if an employee is fired or resigned from the company than it is sent to the related system.
    These can be found under PDC integrated systems. You can find information about the systems from Ecohub. http://ecohub.sap.com/
    I hope this answer will help.

  • How can I use the ni-6024-e with the real time of matlab/simulink. Where can I find any example?

    I am doing the final project and I need to control the ni-6024-e with the RTW (real time) of matlab/simulink.
    Does anyone know or have any example?.
    Thanks

    Rafelmor,
    Have you contacted The MathWorks yet? They probably have the best information.
    However, I did a quick search and found some information on The MathWorks' site. For Data Acquisition Toolbox examples: http://www.mathworks.com/access/helpdesk/help/toolbox/daq/daq_example_index.shtml.
    For RTW information: http://www.mathworks.com/support/product/RT/.
    Good luck with your application.

  • ABS from MATLAB (simulink) to Labview (.vi file)

    Hello
    My Antiskid Control System project requires me to plot the graphs of wheel speed and vehicle speed. The original model is from Matlab simulink file-absbrake(this is an example of control)
    I tried to convert the whole system into labview representation. I donot want to use SIT or RT or any other Labview tools. I wanted to convert from Simulink model into Labview element-by-element. Can anyone help me...plss
    my due date for submission is 15march...so please help me

    abs.vi is the file that i attempted to 'convert' from matlab into labview
    Attachments:
    abs.vi ‏97 KB
    absbrake.vi ‏32 KB
    absdata.vi ‏1 KB

  • How can I put C files gave me from Matlab Simulink Real Time Workshop in a CIN?

    I'm doing a turbine simulation, and I've already done it in Matlab Simulink Real Time Workshop. It gave me files .c, and I want to use them to run the same simulation on a PCI 7030/6040 using LabView RT 5.1. I'm using the CINs. My problem is that I'm able to have .lsb files, but them don't work....I mean I have as output the same result 0(zero). What can I do for solving my problem?
    Thanks in advance!!

    Somehow, this question was posted twice on the same day. See the other posting of this same question for the answer.
    Chad H.
    Applications Engineering
    National Instruments
    http://www.ni.com/ask

  • I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

    I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes  how do I make the layers and tool bars bigger?  Please help@

    Windows will scale applications display or windows will not scale application display depending on how the application is coded.  Photoshop is coded in a way that its display is not scaled by windows.  Photoshop knows about your displays high pixel count not its resolution  so it uses its pixels  however it does not scale its UI to make it usable on your display.  Other application let Windows  scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels.  The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays  2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
    The reg update  and external manifest file  effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size  in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution.  Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768.  Photoshop UI would not fit on the Surface Pro 3 display..
    Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display  3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

  • Dc servo motor in matlab simulink

    hi
    i want to design dc servo motor in matlab simulink.but i dont know how to design so if anyone can help me please
    Solved!
    Go to Solution.

    Hello,
    I think you are posting on a wrong forum... Why don't you try the Matlab forum?
    Anyway, have you looked at this for example:
    http://ctms.engin.umich.edu/CTMS/index.php?example=MotorSpeed&section=SimulinkModeling
    http://www.mathworks.com/help/physmod/elec/ug/example--modeling-a-dc-motor.html
    Best regards,
    K
    https://decibel.ni.com/content/blogs/kl3m3n
    "Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

  • Aufruf des FPGA Konfiguration von Matlab/Simulink

    Hallo ,
    ich versuche gerade ein HIL zu testen mit NI Hardware PXI und FPGA , weiss jemand ob es möglich auf die Konfiguration des PXI  mittel  Matlab/Simulink zugreifen , so zu sagen ob ich kann die Funktionalität des  FPGA oder CAN Karte als blockset in  Simulink/Matlab  statt in  Labview aufrufen. Mein Arbeitsgeber will gerne, dass die ganze Fonktionalitäten als blockset wie zum beispiel unter dspace in Simulink/Matlab  aufrufen kann.
    Ich bedanke mich sehr für die Information
    befaiz

    Hello First  thanks for your answer and your interest, I try to explain what i want to realize. I have a Model in Simulink, I can this Model connect in LabVIEW with simulation interface toolkit,  and with SIT Connection manager the hardware I/O as Model I/O  configure.  
    I would like to make the I/O interfaces of a FPGA 7813R PXI system from Simulink accessible. Similarly as with dSPACE RTI block, I can access the I/O from Simulink means over S Function Block. for example Analog Input.
    Also I want to define the I/O of the Model as FPGA I/O  in Simulink and then can I build the ModelDLL  in Matlab and in SIT download. finally run  the Model-simulation on RT Target.
    I think, we need access to the visa server. I am on the search for this concept.
    Perhaps you or someone can support me.
    My Regards and thanks
    HooSSa

  • Measure signals from Matlab Simulink Model

    Hi,
    I modeled a six bus power system network on Matlab/Simulink and I would like to measure the voltage and current signals using a DAQ card. The DAQ card im having is a
    NI PCI-6132 S Series Multifunction DAQ. How do I go about acquiring this signals?
    Regards,
    Louwrence

    Hey Louwrence,
    Are you going to be using the 6132 card with LabVIEW to acquire the signals? If so, you should look in the NI Example Finder that is installed with LabVIEW. Go to Help>> Example Finder. Then go to Hardware Input and Output>> DAQmx>> Analog Measurement and choose the example you would like to look at.
    If you are trying to use the card through MATLAB, you will need the DAQ Toolbox. You can check for official compatibility here. I do not know what is installed with this toolbox as it is not National Instruments. There may be some examples in there however.
    Hope this helps.
    MATLAB®, Real-Time Workshop®, and Simulink® are registered trademarks of The MathWorks, Inc. 
    Joe S
    Applications Engineer
    National Instruments

Maybe you are looking for