Clearning selection

Hi,
While running a BAPI ACCOUNTING DOCUMENT POST we are facing an issue regarding customer clearing in F-32,we have to manually select all button and then deselect . This is an additional step in clearing which we want it to be done by default. Is there a user exit for the same

Dear:
You don't need any exit for it, you can do it through standard. Please go to F-32...execute customer in it..execute...in editing options.tick Selected items initially inactive.. This will do the job for you.
Regards

Similar Messages

Error message: "playlists selected for updating no longer exist"

I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message:
"Cannot be updated because all of the playlists selected for updating no longer exist."
I haven't been able to highlight which playlists are selected to begin with.
I read through the manual and thought that maybe rebooting the whole system might work. So I deleted Itunes from my computer and re-installed.
Then I tried re-setting my ipod. So now I have nothing on my ipod.
I also deleted everything from my library, thinking it might help to start from scratch. Nothing has worked.
How do I "select" and "unselect" playlists so I can get up and running again?

Here you go.
http://discussions.apple.com/thread.jspa?messageID=607312&#607312

Error while calling a select esb service

javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback:
I encounter the above error while executing a synchronous bpel process, that invokes an esb db select service to fetch a value from the db.
the details available for the error are:
An unhandled exception has been thrown in the ESB system. The exception reported is: "java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0 at java.util.Vector.get(Vector.java:710) at oracle.tip.esb.server.common.wsif.WSIFInvoker.readResponseHeader(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.wsif.WSIFOperation_ESB.executeRequestResponseOperation(Unknown Source) at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:431) at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:353) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:192) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:733) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:368) at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:197) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3266) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1696) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269) at com.collaxa.cube.engine.CubeE
Please suggest
thanx
AJ

Done That,
Thanx a ton Dave, it worked.
So I am finally moving on :-)
Just one question Dave, I happened to work on the Beta release of this version too, the problem was not there. How come we have been able to get it in dev preview.

Logical operators in Oracle select query

Hello all,
Can i use logical operators in oracle select queries?
for 1 and 0 =0 ; 1 or 0 =0
if i have two fileds in a table COL1 have a value of 1010 and COL2 have a value of 0001.
Is there any way to use select col1 or col2 from table? where or is a logical operator?
Regards,

Hi,
NB wrote:
Hello all,
Can i use logical operators in oracle select queries?Sure; Oracle has the logical operators AND, NOT and OR. All the comparison operators, including >, >=, = !=, EXISTS, IN, IS NULL, LIKE and REGEXP_LIKE are really logical operators, since they return logical values. You can use them in SELECT statements, and other places, too.
for 1 and 0 =0 ; 1 or 0 =0
if i have two fileds in a table COL1 have a value of 1010 and COL2 have a value of 0001.It's unclear what you want. Maybe you'd be interested in the BITAND function:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/functions014.htm#sthref1080
BITAND is the only logical function that I know of. Many other functions, especially numberical fucntions such as MOD, have applications in logic.
Is there any way to use select col1 or col2 from table? where or is a logical operator?Whenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements), and also post the results you want from that data.
Explain how you get those results from that data.
Always say which version of Oracle you're using.

Can not select from data dictionary view from a procedure

Hi,
I wonder, which privilege is missing here:
my schema has this roles and privs:
GRANT CONNECT, RESOURCE TO cb ;
GRANT CREATE SESSION TO cb ;
GRANT SELECT_CATALOG_ROLE TO cb ;
GRANT CREATE SYNONYM TO CB;
GRANT CREATE VIEW TO CB;
I create a procedure:
create or replace procedure dd_test as
begin
     dbms_output.enable(2000000);
     for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
               dbms_output.put_line(r.table_name);
     end loop;
end;
sho err
4/38 PL/SQL: ORA-00942: table or view does not exist
When I run the core statement form sql prompt, it works !
so what privilege is missing here ???
thanks for any hint, Lao De

Hi,
thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
How ever, I will update here, when I found the missing privilege.
regards LaoDe

'IF' statement in a select statment?

I have the following cursor in a package specification;
cursor c_sales_code is
select sales_condition||' MC '||sales_option
from sales;This will return something like: 'T300 MC 9'
MC means 'multiple choice' for when there are multiple options. Although, sales_option is sometimes null and in this case I just want 'T300' to be returned, not 'T300 MC'.
How would I go about doing this?
Thanks,
fakelvis

Use
CASE and DECODE
to add the functoinality of Conditional Statements in Your SQL Statements..
These two CASE / DECODE will help you to get your desired output

IF Statement in Select

I need to choose between value1 and value2 within a select statement.
TableA
Flag (char)
Value1
Value2
ItemDesc
pseudo code
select ItemDesc, (if Flag = 'y' then Value1 else Value2) as Price from TableA;
How can this be done?

select   itemdesc,
         sum (case
                 when flag = 'y'
                    then (case
                             when value1 < 10
                                then value1 * 1.2
                             else value1
                          end)
                 else value2
              end
             ) as price
    from tablea
group by itemdesc;

If statement in select statement alias

I have the following select statement. It has the alias Survivors, Deaths and "All Cases". Is it posible to use :P_LANGUAGE variable to say that -- IF :P_LANGUAGE = FRENCH THEN alias are Survivants for survivors, Décès for Deaths, Tous_les_cas for All Cases. Please advise
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS Survivors,
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS Deaths, T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "All Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERS

You may not be able to add this condition inside the SQL Statement. But you can add this condition outside the statement, if you're using PL/SQL...
IF :p_language = french THEN
SELECT ALL t_ntr_multibar.cat,
t_ntr_multibar.num_cases_leftbar AS survivors,
t_ntr_multibar.num_cases_middlebar AS deaths,
t_ntr_multibar.num_cases_rightbar AS "All Cases"
ELSE
END IF;

If statement in the SELECT???

I use Coldfusion as my source for remoting with Flash. I have
created different databases for different materials. However when
an order is placed I get the "id" of the material. I also return
the "type" of material. If I would have planned this correctly I
would have just put all the materials in one database and returned
what I needed just fine. As it turns out I cannot change it.
Below is my code and basically what I'd like to do is say
that:
if bag_traits.trait_type = 1
select materials.material_name where bag_orders.bag_trait_a =
materials.material_id
So right now it's returning a 6. I need the name of the
material from the materials database with an id of 6. I also have a
ribbons table where if the trait_type = 2 then I would need the
ribbons.ribbon_name where bag_orders.bag_trait_a =
ribbons.ribbon_id.
How to I make an if or case statement that will pull the name
from the appropriate database depending on the trait_type? Thanks!

C-Rock wrote:
>
> Why can I not use the material_id number in more than
one column for the
> bag_orders table?
>
As far as I know, that is not the proper way to join multiple
tables.
To join multiple tables you use multiple joins.
I.E.
FROM tableA INNER JOIN tableB ON tableA.key = tableB.key
INNER JOIN
tableC ON tableA.key = tableC.key INNER JOIN tableD ON
tableC.key =
tableD.key
Each join between to tables creates another 'relation'
(database speak
for table like object_ that you can then join to another
table to create
a new relaion and so on and so on. For complex queries it is
usually
much easier to start with the first to tables, confirm that
you return
the desire results, then add the next table. Keep adding one
table at a
time confirming you are getting the expected results each
iteration
before adding another.

USING NULL AND SELECT ALL IN DECODE

COL1 has the following values:
COL1
====
A
B
C
A
B
C
A
D
D
SELECT COL1 FROM TABLE1 WHERE COL1 =
DECODE(:VAL1, 'A', 'AA', 'B', 'BB', 'C', 'CC', 'D', 'DD')
1. what about the null values ? how can I add to the above statements when I enter null for the parameter :VAL1
2. what about all the values in COL1, what shall I enter for :VAL1 ?
THANKS.

SELECT COL1 FROM TABLE1
WHERE nvl(COL1,0) = DECODE(:VAL1, 'A', 'AA', 'B', 'BB', 'C', 'CC', 'D', 'DD',null,0)
Can we use in this way?
Shishu Paul
Chandigarh-India

ADF Get selected values from Dynamic Lists

Hi,
I have a created a dropdown list box where the list gets value through a managed bean. On commit I want the selected value to be saved into the CardiacV1EchoSched column of the Entity object (database). The source looks like this.
<af:selectOneChoice value="#{bindings.CardiacV1EchoSched.inputValue}"
label="#{bindings.CardiacV1EchoSched.label}"
valuePassThru="true">
<f:selectItems value="#{TTrack.carScheList}"/>
</af:selectOneChoice>
The problem is that getCardiacV1EchoSched() in the entity object class is null. The selected value does not get passed into #{bindings.CardiacV1EchoSched.inputValue} at all. If I bind the value to a variable in managed bean I get the selected value.
Thanks in advance,

Hi,
not sure which business service you use to update the database, but if you use ADF Business Components then you need to call the commit operation
Frank

SSRS 2012: How to get a "Select All" that returns NULL instead of an actual list of all values from a multi-select parameter?

I have a multi-select parameter that can have a list of thousands of entries. In general, the user will pick a few entries from the list or "Select All". If they check "Select All", I would much prefer that I get a NULL or an empty string
instead of a list of all values. Is there any way to do that?
In experimenting with a work-around, I tried putting an "All" label with a null value in the list, but it is ignored (does not display in the drop-down). If I use an empty string for the value, my "All" entry does get displayed, but so
does "Select All", which is confusing. Is there a way to suppress "Select All"?
- Mark

I adapted the following from a workaround posted by JNeo on 4/16/2010 at 11:14 AM at
http://connect.microsoft.com/SQLServer/feedback/details/249227/multi-value-select-all-parameter-in-reporting-services
To get a null value instead of the full list of all values when "Select All" is chosen:
1) Add a multi-value parameter "MyParam" that lists the values to choose.
2) Add a DataSet "ParamCount" identical to the one used by "MyParam", except that it returns a single column named [Count] that is a COUNT(*) of the same data
3) Add a parameter "MyParamCount", set it to hidden and internal, then set the default value to 'Get values from a query', choosing "ParamCount" for the Dataset and the one [Count] column for the Value field.
4) Change the parameter for the main report DataSet so that instead of using [@MyParam], it uses this expression:
=IIF(Parameters!MyParam.Count =
Parameters!ParamCount.Value, Nothing, Join(Parameters!MyParam.Value, ","))

Get selected values from Listbox control

Hi All,
I'm still new to SL so please bear with me.
I have a ListBox being bound with some records from a DB. Here's the xaml:
<ListBox x:Name="lstClassSeries" SelectionMode="Multiple" DisplayMemberPath="Description" Grid.Row="11" Grid.Column="1"></ListBox>
What I need is to get the values of the items that were selected and I can't seem to get it to work. I've tried looping through the SelectedItems but there's no property for value or text. I even tried to cast the item as a ListBoxItem but I
get the following error:
Unable to cast object of type 'UI.Silverlight.TransactionService.DTODropDown' to type 'System.Windows.Controls.ListBoxItem'.
How can I get the values of the items selected?
Thanks

You're using windows forms style techniques with xaml.
This is a bad idea.
You ought to learn MVVM.
You probably don't think you want to learn it, but trust me on this one.
Learn MVVM as soon as you can.
There's a selecteditems collection.
You have to cast to listboxitem, it has a content property which you cast to whatever you put in there originally.
Here's a snippet.
I have a class foo, load a bunch of them in. Do stuff. Work out what's selected in the click event of a button.
public class foo
public int id {get;set;}
public string description {get;set;}
public partial class MainPage : UserControl
public MainPage()
InitializeComponent();
lb.Items.Add(new ListBoxItem{Content=new foo{ id=1, description="a"}});
lb.Items.Add(new ListBoxItem { Content = new foo { id = 2, description = "b" } });
lb.Items.Add(new ListBoxItem { Content = new foo { id = 3, description = "c" } });
private void Button_Click(object sender, RoutedEventArgs e)
List<foo> selectedfoos = lb.SelectedItems.Cast<ListBoxItem>().Select(x=>x.Content as foo).ToList();
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Get multiple values from a html select

I have a <select> object on my html page, with ~50 <option> values.
My user must be able to select many options (with the ctrl key).
How can I get more than one value with request.getParameter("...") ??
currently, when I select more than 1 options, and I submit the form, I can only get the last selected item in my JSP.
Thanks in advance!
example:
<form method="get">
<p>Teachers:</p>
<select name="profs" size="10">
    <option value="prof 1">prof 1</option>
    <option value="prof 2">prof 2</option>
    <option value="prof 3">prof 3</option>
</select>
<input type="submit" name="action" value="addSubject">
</form>

Hi,
just use getParameterValues("yourParameter") instead of getParameter("yourParameter")
Hope this helps

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

Clearning selection

Similar Messages

Maybe you are looking for