Clicking add button to display the values

requrement is like this
Could anyone give suggestions with some code .
we have lovs using this one we are searching for the value(ex emloyee name) that value is returned to the base page filed like message text input . we have add button, when ever we click that button to display the value(ex employee name ,desigantion this is from another table )on that same page.

I could not understand your requirement. Post more details of the requirement with specific details.
Message was edited by:
Srini

Similar Messages

How to add a column to a list created with the Dynamic List Wizard to display the values of the fiel

Hi,
ADDT, Vista, WAMP5.0
We have 2 tables: clients_cli (id_cli, name_cli, tel_cli, and several more fields) and cases_cas (id_cas, idcli_cas, court_cas, and a lot of other fields).
Clients may have many cases, so table cases_cas have a foreign key named idcli_cas, just to determine which case belongs to which client.
We designed the lists of the two tables with the Dynamic List Wizard and the corresponding forms with Dynamic Form Wizard.
These two forms are linked with the Convert Dynamic List and Form Wizards, which added a button to clients list named "add case".
We add a client and then the system returns to the clients list displaying all clients, we look for the new client just added and then press "add case", which opens the Dynamic Form for cases, enter all case details and everything processes ok.
However, when we view the cases list it display all the details of the case, including the column and values for the foreign key idcli_cas. As you can image, it is quite difficult for a human to remember the clients ids.
So, in the cases list we added a another column, named it Name, to display the names of the clients along with cases details. We also created another recordset rsCli, selected the clients_cli table, displaying all columns, set filter id_cli = Form Variable = idcli_cas then press the Test button and everything displays perfect. Press ok.
Then, we position the cursor inside the corresponding cell of the new Name column, go to Bindings, click on name_cli and then click on insert. The dynamic field is inserted into the table cell as expected, Save the page, and test in browser.
The browser call the cases list but fails to display the values of the Name column. The Name column is simply empty.
This issue creates a huge problem that makes our application too difficult to use.
What are we doing wrong?
Please help.
Charles

1.     Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen.
2.     Choose List Screen.
3.     In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
4.     In the Screen Number field, enter the screen number of the list screen you want to enhance.
5.     Choose Create.
The Dictionary: Initial screen appears:
6.     Create the list screen structure.
7.     Choose Activate.
8.     Return to the Enhance List Screen in the Enhance Infotypes transaction (PM01).
9.     Choose Create All.
The additional fields are displayed on the list screen, however, they contain no data.
The fields can be filled in the FORM routine FILL-LISTSTRUCT in the generated program ZPnnnn00. The FORM routine is called for each data record in the list.
Structure ZPLIS is identified when it is generated with a TABLES statement in the program ZPnnnn00.
The fields can be filled from the Pnnnn structure or by reading text tables.

How do I click on a cell in a table control, and display the value in a string?

What I would like to do is to click on a cell in a table control, and have the value of the cell be displayed in a string indicator. What ever cell I click on, I would like the value to be displayed in the indicator.
Thank you!
Solved!
Go to Solution.

... or
Event >>> ouse down for table.
Use Coords" to feed invoke node "point To Row Column" and returned "Cell Postion" can be unbundled to produce the row and column tht can be used to index out the value.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Displaying the value of an variable on the stage

I have managed to display the values contained in string variables on stage, and I am happy with that, however when I wish to display the value of an int and convert it to a string as one is supposed to do the output to the stage just calls it [class int] and does not give its value. any suggestions?
My rogram contains a stage at frame 1 which displays a word. The user must input a word. Frame 30 then displays the word which was displayed and the word input by the user. That all works fine. But the value of the variable NumberRight, which has been assigned to that variable will only display as [class int] without showing its value. (even though I have converet it to a string using the .to string function you see below).
My code is as follows;
trace( "The number correct was" + NumberRight); //This works fine in the output window and shows the value of the variable as NumberRight [class int]1 (showing the value to be 1)
outputText.appendText("in/"+textAtIN); //this works fine displaying the word presented and word input by user as in/in
outputText.appendText( NumberRight.toString(     )); //here lies the problem as it just displays [class int] and nothing else.
Yes I have managed to overcome that problem it was some code on the first frame, please excuse, however, now, is there any way to remove the [class int] bit from the displays, I wish to have the results as a clear copy of the results so that they can be printed out, without [class int] all over the place?

Hi Ned thanks for that. Yes I had accidently created blank spaces in the String() argument. (wanted to check if there was a subsequent difference in display and forgot to return them to normal ...Sorted )
Your next suggestion has eliminated the [class int] but I get a value now of 0.
My code on the first frame for a correct response for example is;
function keyPressedIN(event:KeyboardEvent):void
          if (event.keyCode == 13)/*Normally,this will move straight on to the next frame-
          recording a correct response and all that that implies in terms of scores etc. But now I have re directed it to Frame 30 to check are the variables working properly*/
                    //insert code for correct responses vowels etc.
                    VowelI = VowelI+1;
                    NumberRight = NumberRight +1;
                    stage.focus = stage;
                    //There is no need to display the text box as this is a correct response.
                    pupilsResponseIN.visible = false;
                    mainText.visible = false;
                    gotoAndPlay(30);//at the moment this takes me to the display frame to check if all is ok
On the first frame when the user say hits the Return key my code assigns the value of +1 to the variable; eg
NumberRight=NumberRight+1;
and the value of +1 to the value of VowelI
VowelI=VowelI+1
At Frame 30 the code is as follows;
stop();
trace( "The number correct was"+ NumberRight);
outputText.appendText("in/"+textAtIN);
outputText.appendText( "\n");
outputText.appendText("Vowels Correct ="+(int(VowelI).toString()));
outputText.appendText( "\n");
outputText.appendText("TotalCorrect="+(int(NumberRight).toString()));
//outputText.appendText( VowelI.toString());
Now what I am getting is
in/in
Vowels Correct = O
Total Correct = O
Yet the trace (output box) records the Number correct as [class int]1
many years ago I wrote this same program in Authorware using similar code. I am trying to re write it in FlashCS5 using ActionScript 3 and It take days to solve small problems. I notice also that If for example the user of the program makes an error and I record the error as NumberRight =NumberRight -1 the program records it as Total Correct = NaN .
I gave up on this a few months back but I am trying again. I think there must be a better way to do this. Variables do not seem to add up or subtract for me at present. no doubt its me thats got it wrong.

Can i pass plsql table as parameter in a report and display the values

Hi.I have a form with five text items.
Also inside the form I have a button and when I push the button the trigger fires(WHEN BUTTON PRESSED) and the values of the form passed and display in the report.Is it possible to have in the form a detail for example with three rows and three columns and with some way(mayby as plsql table) pass all the parameters from the form to report and then display in the report?I asume the report is a tabular report.
Thanks in advance Panagiotis.

Hi Nigel,
By default, SharePoint will display folder icon for document sets in the search results.
If you need to change this icon in search results, then you can modify the display template for document sets.
http://blogs.technet.com/b/tothesharepoint/archive/2013/09/04/understand-how-search-results-are-displayed-in-sharepoint-server-2013.aspx
How did you set query in the Result Source?
I tested the query below in the result source in my environment, and it worked fine.
{searchTerms}ContentTypeID:0x0120D520*
I recommend to check if the document sets have been crawled in crawl log.
If not, please run a full crawl in Search Service Application and then check the results.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Display the value of stocks per month

Dear all,
A user asked me if it was possible to display the values of stocks or the quantity of stocks per month for the current year?
I tried MB52, MMBE, MB53 but there is no field to select a period, MC.B, MC.9 but the results can not be displayed by month.
My company doesn't have WM.
Thanks a lot for your help.
Olivier

HI
Using T-code MB5B - Stock on Posting Date, the following input data to be given as follows.
Company Code : ______
Plant : _______
Storage Location : ______ if required to be selected
Selection Date : _________ to ___________ (01.05.2010 to 31.05.2010-Month)
Stock Type - selected Valuated Stock
List of Scope click category and following options to be tick marked
With Opening Stock Without Closing Stock
With Opening Stock With Closing Stock, Changed
With Opening Stock With Closing Stock, Unchanged
Settings - Totals Only - Non Hierarchical Representation Layout /ZMB5B tick marked
The above input data given & options are tick marked, Executed the report shown opening, Receipt,Issues,Closing stock, UOM, Opening value, Receipt Value, Issue Value, Closing Value, Currency in columnar (like Excel format).
Hope, it is very useful for you.
Regards,
K.Rajendran

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.
I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt.
So I guess I'm asking if you can use cli_exec and other commands in the "namespace import ::cisco::eem::*" in a normal non-EEM script - can I do that?
This is the error I get:
OTN.159(tcl)#source flash:TCL_SNMP_Remote_Read.tcl
invalid command name "::cisco::eem::event_register_none"             ^
% Invalid input detected at '^' marker.
What am I missing?
================= TCL_SNMP_Remote_Read.tcl ==============================
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if [catch {cli_open} RESULT]
    { error $RESULT $errorInfo }
    else { array set cli1 $RESULT }
if [catch {cli_exec $cli1(fd) "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0" } RESULT]
       { error $RESULT $errorInfo }
       else { set SnmpSysDesc $RESULT }
if [catch {cli_close $cli1(fd) $cli1(tty_id)} RESULT] {
            error $RESULT $errorInfo
puts $SnmpSysDesc
=========================================================================
In the sho-run config I have:
event manager directory user policy "flash:/"
event manager session cli username "cisco"
Any help to get me started would be greatly appreciated!
Tim

If you don't want an EEM policy, then don't use any of the EEM constructs. Instead, all you need is this:
set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

How to display the values stored in the database in the combobox on load?

I am develping one application where in
I wanted to display the values in the combobox which I am taking from the database and in the same form passing that value in same form after selecting it,My program is running fine for the first time but next time it is giving me NullPointerException.
So can anyone tell me please how I should develop the this application to avoid this exception?
Thank You
Praddy

Thanx a lot for showing interest in answering my query.I am pasting my code for ur reference.Please try to reply ASAP.
Thank You,
Praddy.
CODE:
======
<html>
<head>
 <script language="javascript">
 function submitthisform(thisForm)
 thisForm.submit();
 </script>
</head>
<body>
<form method=post name=samepgm>
Select City: <select name=city onChange='submitthisform(samepgm)'> 
<option value=''></option>
<option value='All'>All</option>
<%@ page language="java" import="java.sql.*" %>
<%
 String scity = request.getParameter("city");
 System.out.println(scity);
 Connection con = null;
 Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
 con = DriverManager.getConnection("jdbc:odbc:property","","");
 Statement st = con.createStatement();
 ResultSet rs1 = st.executeQuery("select distinct hcity from housefinance");
 while(rs1.next())
 //String ohname = rs1.getString("hname");
 String ocity = rs1.getString("hcity");
 //out.println(ohname +" ");
 out.println(ocity +" ");
%>
 <option value='<%=ocity%>'><%=ocity%></option> 
<% }
 rs1.close();
 if(scity.equals("All"))
 ResultSet rs2 = st.executeQuery("select * from housefinance");
 while(rs2.next())
 String ohname = rs2.getString("hname");
 String ohadd1 = rs2.getString("hadd1");
 //String ohadd2 = rs2.getString("hadd2");
 String ohcity = rs2.getString("hcity");
 String ohpcode = rs2.getString("hpcode");
 String ohtelno = rs2.getString("htelno");
 String ohfaxno = rs2.getString("hfaxno");
 String ohemail = rs2.getString("hemail");
 String ohmobile = rs2.getString("hmobile");
%>
<pre>
<tr>
<td>Company : <%=ohname%> </td>
<td>Address : <%=ohadd1%></td>
<td>City : <%=ohcity%> </td>
<td>Pin : <%=ohpcode%></td>
<td>Telphone : <%=ohtelno%></td>
<td>Fax No: : <%=ohfaxno%></td>
<td>Email : <%=ohemail%></td>
<td>Mobile No. : <%=ohmobile%></td>
</tr>
</pre>
<%
 else
ResultSet rs = st.executeQuery("select * from housefinance where hcity like '%"+scity+"%'");
 while(rs.next())
 String ohname = rs.getString("hname");
 String ohadd1 = rs.getString("hadd1");
 //String ohadd2 = rs.getString("hadd2");
 String ohcity = rs.getString("hcity");
 String ohpcode = rs.getString("hpcode");
 String ohtelno = rs.getString("htelno");
 String ohfaxno = rs.getString("hfaxno");
 String ohemail = rs.getString("hemail");
 String ohmobile = rs.getString("hmobile");
%>
<tr>
<td>Company : <%=ohname%> </td>
<td>Address : <%=ohadd1%></td>
<td>City : <%=ohcity%> </td>
<td>Pin : <%=ohpcode%></td>
<td>Telphone : <%=ohtelno%></td>
<td>Fax No: : <%=ohfaxno%></td>
<td>Email : <%=ohemail%></td>
<td>Mobile No. : <%=ohmobile%></td>
</tr>
<hr>
<% }
%>
</select>
</form>
</body>
</html>

How to display the values in JSpinner in format day:HH:mm

Hi All,
I want to know how can I display the values inside a JSpinner in the format day:HH:mm. Here the value of 'day' can be anything say from 0 to 365 and HH stand for hour and mm stands for minutes.
I tried to implement it using
mSpinner.setEditor(new JSpinner.DateEditor(mSpinner, "DD:HH:mm"));
but here the values of day was not proper. Please let me know if there is any standard format or how can I configure my own editor.
Thanks,
Rohit.

Hi,
It worked well for 112 as 112 comes under April month.. i.e. it will work properly for the range 91 to 120 as the current month is April and if we start counting from january 01 then for April month , the number of day will fall under range 91 to 120.
See, it will allow you to change the values beyond the limit (i.e. less than 91 or more than 120) but the real problem is that I used this spinner in the table and when I will try to save the value of spinner , then if the value of day in beyond the limit 91 to 120 then it will automatically changing in the range between 91 to 120.
I tried to use format DD:HH:mm ...... do I need to use any other format..
Hi All,
I want to know how can I display the values inside
de a JSpinner in the format day:HH:mm. Here thevalue
of 'day' can be anything say from 0 to 365 and HH
stand for hour and mm stands for minutes.
I tried to implement it using
mSpinner.setEditor(newJSpinner.DateEditor(mSpinner,
, "DD:HH:mm"));
but here the values of day was not proper. Define "not proper". I just tried it and it displayed
day 112 for today which seems correct.

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

How to display the value of level axis in a scattered graph

hi All,
I have created a scatterd graph and i am able to show the X-axis and Y-axis values as tool tip. my requirement is to display the value of level axis also within the tool tip.
please help me to configure the value of level axis as tooltip.
thanks in advance

Hi,
Thanks for the reply. i was able to configure the tool tip for X and Y axis, but i was not able to shoe the third or level axis value in the tool tip.
please help me in configuring the third or level axis value in tool tip.
thanks in advance.

How to display the value of a column in a chart at the top of each column

How to display the value of each column in a chart at the top of each column?

Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry

Call RFC from ECC and display the values in AET

Hi ALL,
I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
In getter method of tat AET field what code should i write?
Plz help me on this.

HI,
1) Call the RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
AET FIELDS :    zzfld00000M    zzfld00000N
Description :    Budget Quan    Forecast Quan
values         :    (--5.0)(6.0--
2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
Edited by: venkatabharathv on May 23, 2011 2:44 PM
Edited by: venkatabharathv on May 23, 2011 2:49 PM

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

JDEV 10G: how to display the value of the line chart using jChart in JSP

I have draw the line chart in JSP using the JChart and now I wan to display the value label in the line there..
but the value wasn't show..
anyone can help me..
thx..

Hi,
what I do understand, you want to display the value of each point in your Line Graph.
I guess you will be having BIGraph.xml file. In this file check the "Show Data Tips When Mouse is over bars" checkbox.
Lets try with this.
--Abhijit

Clicking add button to display the values

Similar Messages

Maybe you are looking for