Clicking on a link to open a new page or tab gives me a blank page.
If I click on a link to open a new page or a new tab, the page that opens is always blank and no address is in the address bar. Also, occasionally, my refresh button is "grayed" out so I can't hit that either. I think this is some sort of security setting blocking it. Can anyone help.
Thanks Jason, I had the same problem and did exactly the steps above. Problem solved! You rock! :)
Similar Messages
-
Ever since I downloaded the new Firefox, when I right-click on a link to open it in a different tab, the tab will open but will not load anything, no matter what link I try. The tab will show the website destination in the navigation bar, but will not automatically load it; I have to press the load button in the navigation bar instead of it instantly loading.
== This happened ==
Every time Firefox opened
== The newest version, 3.6.6, of Firefox was downloadedIt's not specific sites. I can middle-click on the same link 50 times and it will open it in a new tab 45 times and 5 of those times, it will randomly open it in an entirely new window. I don't know what's causing this.
It happens so randomly that I don't know how to pin-point what it could be. -
I'm running Firefox 3.6.13 and if I click on a link to open a new window nothing shows up - i.e. if I click on 'enlarge' on an Ebay auction photo a new window opens but it's blank inside.
Any ideas please? I've tried uninstalling and re-installing, and downloading and installing Flash but no joy.* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Firefox closes after I click on a link to open a new window
I had to reinstall Window 7, and of course, Firefox and Thunderbird. Now Firefox closes after I click on a link to open a new window. For example, if I'm in Thunderbird, and i click on a link in an email, Firefox gives me a message like "Firefox is already open, but must close before opening a new window."
Is there more than one installation of Firefox listed in the Programs installed?
-
I'm using Firefox 8.0 on Suse 11.4 today is 11/28/11 the past 24 hours I've been experiencing this: I always try to right click on links and open in new tab, lately when I do so and move the cursor into the dialog box the box disappears. Also if I online shop say for clothing, if I want to change size's when I click the button to do so nothing happens when I want to scroll down and pick a different size, (I can hi-light the size and click on it then when the window scrolls back up the default size is still there. This isn't consistent with all web sites.
You can middle-click a link to open the link in a new tab.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Flash website - need link to open in new page
I created my web site in Flash and published it as an HTML file. It's a page that has thumbnails. Clicking on a thumbnail should open a new window to view the full-size version.
When I play a SWF file and click on thumbnails, my project opens in a separate window.
When I open my page (published in Flash as HTML) in Dreamweaver and view it in the browser, when I click on thumbnails, instead of opening a new window full-size version overrides the current window contents -- but there is no "back" tab on the content, and the browser "back" tab takes me to the home page rather than back to the previous window.
How do I make it so that the link opens a new window (that can then be closed after viewing) rather than overriding the contents of the existing window after I publish my page as HTML file?
Thanks for suggestions!My flash published html file works fine, I cannot open my thumbnails in a separate window when I open my HTML file in the browser from Dreamweaver.
It doesn't even open in the different tab. It opens over my viewing page and I have to click "back" in the browser, but it goes back to the main menu not to previous viewing page.
My thumbnails and links to the full-size files are in a separate XML file.
Thanks again -
for example there's a link a friend sent me in my e-mail and I right-click on it, and select "Open in a new tab" it pops open like normal, except it does not load the page, I have to click the box and press enter to even get it to load it. In previous versions I have never had that problem, current version of Mozilla Firefox I am using is version 4, previous was 3.6 hope this helps figure this out.
You can middle-click a link to open the link in a new tab.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I get redirects always in current open page. If I click a link and say open in new tab or new window it does not redirect. I've noticed explorer is now advertising built in software to eliminate someone hijacking their browser. If I have to keep searching for tools to clean registry's and browser issues -- I may have to switch back to Explorer or Chrome. Lately my Firefox which I'm most used to is driving me nuts... Why can't you guys provide a tool that cleans the adware, hijacks, etc off the browser? I even downloaded the latest version and I'm still having the same problem-- seems the hijack to redirect remains......
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer.<br>
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
I open firefox and type in CNN(or any other item). When the link appears I click on it. Instead of opening in the existing tab, firefox opens a new tab.
Thank you for this information. I love learning new things!
-
For example, when I'm in Flickr and I'm looking at an album, I click on a picture and it opens a new tab for that picture. When I click on the arrow to see the next picture in the series, it proceeds to open yet another tab, and so on. It's not difficult to have tabs that span the width of my screen in no time at all.
This should help:
1. Go to: Tools > Options > Tabs
2. There is a section at the top that says 'Open links that open in a new window in:' and then a drop-down menu
3. In the drop-down menu, select the 'Current Tab' Option
4. Click 'OK'
'''If this was the answer you were looking for, please click 'Solved' -- Thanks.''' -
I am unaware of having made any changes to my settings before this started. The best way I can describe it is that simply clicking on a link causes it to "open link in new window" rather than simply "open"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Each time I click on a link in safari a new page opens. How do I stop this?
How do I stop a new page from opening each time I click on a link?
If the page contains the link you clicked on, choose Preferences from the Safari menu, click on Tabs, and change the settings as desired.
If the page contains an ad, click here and run the tool.
(112477) -
When i click on a link inside a website, a new screen appears. This one will be blank and in the webadress it will say searching Bookmarks and History. Nothing will happen.
Please helpStart Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
There are other things that need attention.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r32
# Java Plug-in 1.6.0_06 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE) -
Way to click on link to open in new page?
Anyone figure out a way to open a link in a new page? I have a couple of pages I use as "home" pages and I'd like to be able to tap and open a link in a new page to keep the existing page at its site.
I haven't found a way yet. It depends on how the original page was coded.
If it's a page you control, try adding the following to the link anchor tag:
target="_blank". If not, sorry. Maybe it's something they'll add, but honestly, I doubt it (my personal opinion). It would add clutter to a portion of the interface that's working quite smoothly right now. There's no precedent for a 2-fingered tap like holding down a key, and holding down on the URL for a pause already does something.
My two cents. Sorry! I agree it would be very useful.
Aym -
How to click on h:datatable and open a new page
Hi,
I'm new to JSF. I have a basic example with JSF h:datatable which displays data. When I click on the table row new page is opened and an argument s passed via the http header:
Datatable:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core">
<head>
<title>test</title>
<script type="text/javascript">
function addOnclickToDatatableRows() {
//gets all the generated rows in the html table
var trs = document.getElementById('myForm:dataTable').getElementsByTagName('tbody')[0]
.getElementsByTagName('tr');
//on every row, add onclick function (this is what you're looking for)
for (var i = 0; trs.length > i; i++) {
trs.onclick = new Function("rowOnclick(this)");
function rowOnclick(tr) {
// var childNodes = tr.childNodes;
// for(var i = 0; childNodes.length > i; i++) {
var elements = tr.cells[0].childNodes;
for(var i = 0; elements.length > i; i++) {
if ((typeof elements[i].id !== "undefined") &&
(elements[i].id.indexOf("lnkHidden") > -1)) {
//opne in a new window// window.open(elements[i].href);
location.href=elements[i].href
break;
return false;
</script>
</head>
<body onload="addOnclickToDatatableRows();">
<h:form id="myForm">
<h1>Click on table row example</h1>
<h:dataTable id="dataTable" var="data" value="#{datatableBean.lstData}" border="1">
<h:column>
<f:facet name="header">
<h:outputText value="ID" />
</f:facet>
<h:outputText value="#{data.id}" />
<h:outputLink id="lnkHidden" value="AnotherPage.xhtml"
style="display:none">
<f:param name="id" value="#{data.id}" />
</h:outputLink>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Value1" />
</f:facet>
<h:outputText value="#{data.value}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Value2" />
</f:facet>
<h:outputText value="#{data.value}" />
</h:column>
</h:dataTable>
</h:form>
</body>
</html>
Managed bean:package edu.home;
import edu.home.model.Data;
import java.util.ArrayList;
import java.util.List;
import javax.faces.bean.ManagedBean;
import javax.faces.bean.ViewScoped;
@ManagedBean
@ViewScoped
public class DatatableBean {
private List<Data> lstData;
* Creates a new instance of datatableBean
public DatatableBean() {
lstData = new ArrayList<Data>();
lstData.add(new Data(1, "Hello World"));
lstData.add(new Data(2, "Hello 123"));
lstData.add(new Data(3, "Hello abv"));
lstData.add(new Data(4, "Hello qaz"));
* @return the lstData
public List<Data> getLstData() {
return lstData;
* @param lstData the lstData to set
public void setLstData(List<Data> lstData) {
this.lstData = lstData;
The Java object:package edu.home.model;
public class Data {
private int id;
private String value;
public Data(int id, String value) {
this.id = id;
this.value = value;
* @return the id
public int getId() {
return id;
* @param id the id to set
public void setId(int id) {
this.id = id;
* @return the value
public String getValue() {
return value;
* @param value the value to set
public void setValue(String value) {
this.value = value;
The page which is opened after the row is clicked:<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html">
<head>
<title>TODO supply a title</title>
</head>
<body>
<h1>This is another page</h1>
<h:panelGrid columns="2">
<h:outputText value="Selected ID" />
<h:outputText value="#{anotherPageBean.id}" />
</h:panelGrid>
</body>
</html>
The managed bean of the opened page:package edu.home;
import javax.faces.bean.ManagedBean;
import javax.faces.bean.RequestScoped;
import javax.faces.context.FacesContext;
@ManagedBean
@RequestScoped
public class AnotherPageBean {
private int id;
* Creates a new instance of AnotherPageBean
public AnotherPageBean() {
try {
this.id = Integer.parseInt((String)FacesContext.getCurrentInstance().getExternalContext().getRequestParameterMap().get("id"));
catch (Exception e) {
this.id = 0;
* @return the id
public int getId() {
return id;
* @param id the id to set
public void setId(int id) {
this.id = id;
My question is how I can pass the argument into the background, without using the http header? Can you help me to implement this example?
Best Wishes
Peter
Edited by: 932633 on May 7, 2012 3:18 PM
Edited by: 932633 on May 7, 2012 3:18 PMEJP wrote:
And why all the futzing around in Javascript? Why not just use <a> or <h:outputLink> in the normal way? What value are you trying to add here?
I'm new to JSF.OP answered that already. I guess the OP really wants to turn a table row into something clickable, a link won't suffice then. Basic JSF tags don't support tagging event handlers to individual rows/columns as far as I know.
@OP: you should really check out extension frameworks like Primefaces which have more advanced datatable implementations. Check out this for example:
http://www.primefaces.org/showcase/ui/datatableRowSelectionInstant.jsf
There is also Richfaces, Icefaces, Tomahawk. Probably using any of these extension frameworks you hardly ever have to write manual javascript.
Maybe you are looking for
-
I'm an Adobe CC member and need to install the CC products on a new computer. When I download CreativeCloudInstaller.dmg and I double click to install, it requires my password but it doesn't recognizes it even when I'm logged in. Somebody knows what
-
Why isn't my podcast author value being updated in the iTunes store
I have three podcast feeds and recently updated the value in the author tag from "The MetalsPeakers" to "MetalsPeak.com". For some reason, that update is only showing up for one of the three feeds when I look them up in the iTunes store. Here are the
-
Notification Center not working for Mail
Notification Center doesn't give me a banner or a sidebar entry when I recieve an incoming e-mail message. The problem persists regardless of whether the Mail app is open or closed. I have checked my settings in both System Preferences and in Mail. W
-
How can you sort photos by descending date in Photos?
how can you sort photos by descending date in Photos?
-
Setting the aspect ratio of an image
Hi Is it possible to specify the aspect ratio of an image? I have a bunch of video shots in my library and they all have non-square pixels so would like to "set" their aspect ratio. Thanks upfront!