Client installation Administration Tool

Hi,
I succesfully installed BI EE One on a server machine.
Now, I want to install the Admin Tool on several client machines but the installer doesn't have the option to perform a custom installation.
How can I perform an installlation of the Administration Tool without having to install the Bi Server?
Tx,
Arno

install all and use only the admin tool or uninstall the other.....
i hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Similar Messages

OBI SE 1 Administration Tool as a client tool to another OBI SE1 instance

Our client has installed the OBI SE 1 on a "server" machine with no hassles. They then installed OBI SE 1 again on a different "client machine", in order to use, only the Administration Tool as a client tool to the other OBI SE 1 Server instance.
They changed the Oracle BI ODBC connectivity to point to the other machine but when they try to use the Administration Tool they get the following message:
[nQSError: 37001]Could not connect to the Oracle BI Server instance.
They then tested the ODBC Client tool to test connectivity and they can access the OBI Server instance in question.
I know that with the SE 1 installation there are no separate installs for client and server components, so my question is: can they do this or in the SE 1 the Administration tool must reside on the same machine as the Oracle BI Server??
Any help will be much appreciated.
Thanks,
Sergio

Did they use the "Oracle BI Server" ODBC type?
Are they able to successfully ping the remote machine?
There is also a possiblity that they did not fully configure the connection to the Remote Repository. There are 3 steps to the wizard.
The Admin tool is the same admin tool that comes with BI EE (but at a lower release level than the current BI EE, so do not try to just install that client, it will adjust the Repositoy upward and then it will be incompatible with BI SE One). I have connected to many remote repositories without any problem.
Can you post the full log from C:\OracleBI\server\Log\NQSAdminTool.log
Thanks

Installed OBIEE Administration tool on 32 bit client, next step ?

Hello all,
I have installed a BI Server on a 64bit server and OBIEE administration tool on a separate 32-bit client as described in the following post :
How To Install Only The OBIEE 11g Administration And Client Tools [ID 1186342.1]
I assume that next step would be to migrate the BI Discoverer EUL to BI Server; but are there any other configuration that I should do first before that ? Should I install an application database in 11g prior to the migration ? My client only wants a demo with an example from the currently existing EUL so I thought I would make this as simple as I could...
Thank you for shedding any light on this!!!
Myriam

Hi,
If you look at the compatibility matrix you can see the Admin tool is only supported up to Windows 7, there is no official support for Windows 8 / 8.1 on the current version (new versions will maybe introduce it).
I also read somewhere the 32bit version works, but I also read it was extremely slow when opening (10-15 minutes) and no guarantee everything works.
In the end the best solution is probably to run it in a VM for now waiting for new releases.

Problems while trying to open OBI Administration Tool

Hi everybody,
I’m getting an error while trying to open the OBI Administration Tool. I performed properly the installation with the client installer, and then created the ODBC connection to the OBI Server, which is hosted in a Red Hat Enterprise Linux 5 (64 bits).
The error I’m getting is the next one:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus Client T...
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
This is an error that seems to have appeared previously on the forum, but unfortunately I didn’t find any fixing solution. I found posts speaking about cleaning the boot and reinstalling the Visual C++ running components, but they don’t work (at least in my case).
Any idea?
Thanks in advance,
Hibai.

Hi,
I have one more question. I need to migrate the database from US7ASCII to UTF8.
For this I ran csscan for user "TEST" as well as against full database.
Below log is the csscan output against full database. but my application is depended on TEST schema only. Shall I need to migrate SYS objects data as shown below or it's not required?. If required how to migrate these objects data?
Looking forward you help.
USER.TABLE Convertible Exceptional
SYS.METASTYLESHEET 58 TEST.Table_1 9 0
TEST.Table_2 11 0
TEST.Table_3 17 0
TEST.Table_4 11 0
[Distribution of Convertible Data per Column]
USER.TABLE|COLUMN Convertible Exceptional
SYS.METASTYLESHEET|STYLESHEET 58 0
Thanks,
Sankar

Upgrade to Windows 8.1 Pro from Windows 8 Pro causing issues with Remote Server Administration Tools

Last night I received the Windows 8.1 update and it has caused Remote Server Administration Tools to stop working. I tried to reinstall the tools using Windows8.1-KB2693643-x64.msu but get the following error:
Windows Update Standalone Installer
Installer encountered an error: 0x8007000d
The data is invalid.
In the event log I have the following error
Windows update could not be installed because of error 2147942413 "The data is invalid." (Command line: ""C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu" ")
System
Provider
[ Name]
Microsoft-Windows-WUSA
[ Guid]
{09608C12-C1DA-4104-A6FE-B959CF57560A}
EventID
3
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-11-05T12:14:18.035865000Z
EventRecordID
1562
Correlation
Execution
[ ProcessID]
5224
[ ThreadID]
5132
Channel
Setup
Computer
removed
Security
[ UserID]
S-1-5-21-1644491937-764733703-854245398-1794
EventData
UpdateTitle
ErrorCode
2147942413
ErrorString
The data is invalid.
CommandLine
"C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu"
I did have the Remote Server Administration Tools installed previously when I was running windows 8 pro and everything was fine. I've tried to remove the older version but according to the below it isn't even installed and Remote Server Administration
Tools doesn't appear in Turn Windows features on or off.
c:\RSAT>dism /online /Get-Packages
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 24/09/2014 06:33
Package Identity : Microsoft-Windows-Embedded-EmbeddedLockdown-Package-TopLevel~31bf3856ad364e35~amd64~~7.3.9600.17116
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 14:46
Package Identity : Package_for_KB2891214~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2902816~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2920189~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931358~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931366~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2934018~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939153~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2950153~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2954879~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2955164~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2956575~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958262~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958263~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959626~31bf3856ad364e35~amd64~~6.3.3.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2961072~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962140~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962872~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2964718~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965142~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965500~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966407~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966870~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2967162~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2968296~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2968599~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2969817~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971203~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971850~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2972103~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2972280~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973201~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973351~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2974008~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2975061~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 07:11
Package Identity : Package_for_KB2975719~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2976978~31bf3856ad364e35~amd64~~6.3.2.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2977292~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2978041~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979573~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979582~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2980654~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2987107~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2989542~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2990532~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2993651~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2998174~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000061~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000869~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000988~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
The operation completed successfully.
Any help on this issue would be appreciated, if you need any further information please let me know.
Thanks

SeniorInternet,
I’ve seen this issue in the past and it occurred because the file was corrupted.
It’s possible that something went wrong when downloading it originally on your newly upgraded machine.
Try downloading
KB2693643 again from another machine and install it.
Hope this helps!
Mike
Windows Outreach Team – IT Pro
Windows for IT Pros on TechNet

Oracle Client Installation. ODBC "not configurable".

Hi people.
I need your help to solve a problem in a installation of Oracle XE Client.
I install Oracle XE Client in a Windows XP.
In Control Panel -> Administrative Tools -> ODBC
Later in the flap: Controlers
I don't see the "Oracle in XE" controler.
OK. I look in the directory and exists the sqora32.dll, etc. etc.
Do you know how resolve this?
Oks. That's my problem. Now I tell you what I do trying to solve it.
I find in other forums that I can utilize, the normal 10g client or use Instant Client.
Important question: If I take one of this solutions. Have a cost associated?
How much is the cost for instant client?
How much is the cost for normal 10g client?
The interesting of XE in this phase of my project is that is completly FREE !!!
It give me the opportunity of migrate in a later time to a more sofisticated version of Oracle but at this moment I dont complete my product. ;-)
I will try with this solution but I have intrigue and desire of drive the XE software not patch it.
The documentation is recurrent to a document that doesnt explain nothing about my problem.
I tried to register the dll with the following command:
regsvr32 C:\XEClient\bin\sqora32.dll
And obtained the following message (followed by other):
Error Cannot Load Resource File sqresus.dll
Do you know how resolve this?
Best regards
Roberto

vinay raj wrote:
Hello Stevens,
Thanks for the reply. I have installed 11g r2 64 bit client and I have tried this way too C:\Windows\SysWOW64\odbcad32.exe
Like I said, the (sysWOW64) is for the 32-bit. You now assert you installed 64-bit, so that is not applicable
but there were no drivers found. I didnot find any odbc folder in oracle client home. Could you please suggest what needs to be done next.
Now we know you installed 11.2 client. Like I said, the ODBC drivers are NOT installed by default on that version.
And so you need to do as I said in my last post:
do a default installation, then go back and do a 'custom' installation, specifying the same ORACLE_HOME as before, and selecting the ODBC components.
Best Regards
Vinay Raj Malla
Jr. Oracle DBA
Miracle Software Systems Inc,.

How to unattended deploy Lync Server 2013 administrative tools

Hi all,
I'm trying to deploy the Lync Server 2013 administrative tools unattended but it seams not to be such easy as with other Microsoft products.
I have looked for Lync Server setup command options/Switches but didn't find anything.
Currently the only way it really works is by manually installing the administrative tools using normal deployment wizard.
I have obsorved that the wizard then executes in the backgroud (not transparent) a set of different tasks like preparation tasks, installs some MSIs from the setup folder (like SharedManagementObjects.msi, SQLSysClrTypes.msi) and it copies
the Lync Powershell Module locally.
I'm trying to find a way where I can deploy only this Lync 2013 administrative Tools on a set of Administrators Workstation (Windows 7 clients) and on some Windows Server 2012 R2 Management Servers by using for example a Powershell script or any other way
... important is that I can install them unattended and distribute them via existing software distribution tool.
Is there really no way to install them unattended?

Hi Sergio Verardo,
If I understand you correctly, the following steps for your reference.
1. Installing all the required software that Anthony mentioned.
2. Running the following command on target machine.
Msiexec
/i \\SharePath\admintools.msi /qn
I tested it and worked on my computer.
Best regards,
Eric

Cannot connect online from administration tool to repository

Hi everyone,
I am still a beginner with BI so there may be a misunderstanding.
I installed the BI developer client tools on a different host than the BI server.
I tried to work through the BI tutorial, creating a repository file on the client host and uploading it to the server.
Now I want to connect online to it, but in the dialog of the administration tool, the button for actually opening the repository is greyed out. I can provide the repository name, user and password, but nothing.
The documentation says I should select the ODBC system DSN for connecting to the repository, but the dialog does not offer me one.
I created an ODBC system DSN to the BI server upon installation of the client tools, and the test works fine.
I did create it using the ODBC driver of an Oracle client installation. The BI client tools themselves do not seem to install its own ODBC driver.
Why is this system DSN not provided in the administration tool dialog?
Where am I failing?
(everything, BI client tools, BI server, Oracle ODBC driver is 11g)
Best regards,
Jörg

Ok, solution found.
The error, as always, was sitting in front of the screen.
First, working with Window-7-64, I did not realize there are two different ODBC administration panels. The one in the control panel open with the 64bit-ODBC drivers, the one used by the BI client tools is called in C:\Windows\SysWOW64
Second, I did not configure the DSN correctly. I always wondered how it would now on which host the BI server resides and overlooked the server text field several times. (Luckily I will receive a new pair of glasses next week).
Now it is working fine.
Best regards,
Jörg

Can not use repository administration tool

Hello,
I'm a newby at Oracle Designer and I have a problem create a repository for Oracle Designer.
On my computer I have installed the following software:
x Java SDK & JRE 6
x Oracle Database 10g R2
x Oracle Designer 10.
While I'm installing Oracle Designer the OUI says that it can't find Java JRE but the installation completes.
If I want to use Designer with the hr-schema it says I have to create a repository for the user hr.
If I want to open the repository administration tool nothing happens nothing. If I want to open the repository command line tool it says that it can't find ORACLE_HOME but I have set the environment variable ORACLE_HOME to the database home c:\oracle\product\10.2.0\db_1.
I presume that I have to install the complet Developer Suite. Is this correct or does anybody know the answer?
Please Help me!
Thanks to everybody.

Yes you have to install the complete Developer suite for Windows. Then you will need to install a repository on an existing database.
Here are some quick instructions on doing that:
After you install the IDS 10G in a new oracle home on the Client windows PC you will find the intall manual under:
start - programs- Oracle Developer Suite - Designer documentation - Repository instalation Guide
The following are the step I use to build a new repository
You will need to set paths and names as you desire for your local PCs and repostiory.
-- Step 1
Log on as SYS
This is so you can get the path name of your datafiles:
select file_name, tablespace_name from dba_data_files;
-- D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\TEMP_65.DBF
create tablespace constant_grow_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\constant_grow_indexes_01.dbf'
size 4000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace constant_grow_TABLES
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\constant_grow_tables_01.dbf'
size 15000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace dependency_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\dependency_indexes_01.dbf'
size 5600k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace dependency_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\dependency_tables_01.dbf'
size 9000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace diagram_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\diagram_indexes_01.dbf'
size 1000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace diagram_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\diagram_tables_01.dbf'
size 2000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace lob_data
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\lob_data_01.dbf'
size 1200k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace rapid_grow_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\rapid_grow_indexes_01.dbf'
size 250000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace rapid_grow_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\rapid_grow_tables_01.dbf'
size 500000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace system_meta_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\system_meta_indexes_01.dbf'
size 20000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace system_meta_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\system_meta_tables_01.dbf'
size 30000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace temporary_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\temporary_indexes_01.dbf'
size 5000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace temporary_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\temporary_tables_01.dbf'
size 9000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace version_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\version_indexes_01.dbf'
size 9000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace version_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\version_tables_01.dbf'
size 12000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
-- Step 2
Make sure you ave plenty of space in your system tablespace
select tablespace_name, sum(bytes)/1024/1024 from dba_free_space
group by tablespace_name;
alter tablespace system add datafile
'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\system03.dbf' size 140m;
-- Step 3
As SYS
create user owner identified by owner default tablespace users
temporary tablespace temp;
Run this file as SYS
@ D:\Designer_Home\IDS10_1_2\repadm61\UTL\CKROROLE.SQL
GRANT EXECUTE ON DBMS_LOCK TO owner;
GRANT EXECUTE ON DBMS_PIPE TO owner;
GRANT CREATE TABLE TO owner;
GRANT CREATE VIEW TO owner;
GRANT CREATE PROCEDURE TO owner;
GRANT CREATE SYNONYM TO owner;
GRANT CREATE SEQUENCE TO owner;
GRANT SELECT ON v_$nls_parameters TO owner WITH GRANT OPTION;
GRANT SELECT on sys.V_$PARAMETER TO owner;
GRANT SELECT ON dba_rollback_segs TO owner;
GRANT SELECT ON dba_segments TO owner;
GRANT CREATE ANY SYNONYM TO owner;
GRANT DROP ANY SYNONYM TO owner;
GRANT CREATE PUBLIC SYNONYM TO owner;
GRANT DROP PUBLIC SYNONYM TO owner;
GRANT ck_oracle_repos_owner to owner;
GRANT CONNECT, RESOURCE TO owner;
GRANT dba TO owner;
(If you want Row Level Security (RLS) on)
GRANT execute on dbms_rls to owner;
-- Step 4 Adding a user
create user user65 identified by user65 default tablespace users
temporary tablespace temp;
GRANT CONNECT, RESOURCE TO user65;
GRANT CKR_OWNER TO USER65;
GRANT CREATE TABLE TO user65;
GRANT CREATE VIEW TO user65;
GRANT CREATE PROCEDURE TO user65;
GRANT CREATE SYNONYM TO user65;
GRANT CREATE SEQUENCE TO user65;
GRANT SELECT ON dba_rollback_segs TO user65;
GRANT SELECT ON dba_segments TO user65;
GRANT CKR_OWNER TO USER65;
GRANT EXECUTE ON SDD_ACC_PRIV_LIST TO USER65;
GRANT EXECUTE ON SDD_SYS_PRIV_LIST TO USER65;
GRANT SELECT ON SDD_DEPENDENCY_TYPES TO USER65;
GRANT SELECT ON I$RM_ELEMENT_TYPES TO USER65;
GRANT SELECT ON SDD_GLOBAL_NAMES TO USER65;
GRANT EXECUTE ON JR_UTIL TO USER65;
GRANT EXECUTE ON JR_SYSTEM_UTIL TO USER65;
GRANT EXECUTE ON CKMIGFUN TO USER65;
-- Step 5
The following are the recommended minimum settings.
optimizer_mode = Choose
compatible = 9.0.0 # for an Oracle9i database
compatible = 8.1.7 # for an Oracle8i database
max_enabled_roles = 30
sort_area_size = 262144
sort_area_retained_size = 65536
hash_area_size = 1048576
optimizer_index_caching = 50
optimizer_index_cost_adj = 25
shared_pool_size = 32000000
db_block_buffers # comment out on an Oracle9i database
db_block_buffers = 2000 # on an Oracle8i database
open_cursors = 3000
processes = 100
db_file_multiblock_read_count=16 # for a 4K Oracle block size
db_file_multiblock_read_count=32 # for a 2K Oracle block size
db_file_multiblock_read_count=8 # for a 8K Oracle block size
Step 5b - (Oracle 9i or 10.2 DB) Install Oracle 9i or 10.2 Import and Export Utilities
Before installing Designer Repository on an Oracle 9i or 10.2 database, you need to set up the installation workstation to use the Oracle 9i or 10.2 import and export utilities. To do so, perform the following steps at the workstation from which you will be running the repository installation:
From the Oracle 9i or 10.2 installation media, install the Oracle 9i or 10.2 import and export utilities in a dedicated Oracle home.
In the Windows Registry, locate the key named:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_HomeName\REPOS61
where HOMEn is the home number of the home installed into for a multiple Oracle home environment, but is not present where the default Oracle home is being used.
Change the value of the EXECUTE_IMPORT and EXECUTE_EXPORT variables to point to the new Oracle home. Thus, if the new Oracle home is d:\des_9i, the settings would be:
d:\des_9i\bin\exp.exe
d:\des_9i\bin\imp.exe
-- Step 6
Log on to the Repository Admin Utility of Designer
start - programs- Oracle Developer Suite - Designer - Repository Admin Utility
Install Repository button
Make sure both check boxes are checked(one is grayed out) Next
Select the proper tablespace for the seletced box
Start the install.
Hope this helps.
Michael.

Client installation on windows 2008 64-bit

Hi,
Windows2008 64-bit
We are having Oracle9iR2 db on one machine and need to setup client-server connectivity.
For that I have to install Oracle client setup on the machine which is having Windows2008 64-bit Os
so, when trying to install Oracle10g client on Windows2008 64-bit (102010_win64_x64_client) getting the below error :
Abnormal program termination. An internal error has occured.
Please provide the following files to oracle support"
"Unknown"
"Unknown"
"Unknown"
can anybody please tell me the reason and required action to be taken ?
The above error occurs immediately after starting the installation.
which version of oracle client tool can be used to install on windows2008 64-bit machine to connect Oracle9iR2 db ?
Regards

Hi
If you are Windows Server 2008 R2 level than you need to install 10.2.0.5 client
Please see below:
Statement of Direction: Oracle Database 10g Release 2 Client (10.2.0.5) with Microsoft Windows 7 and Windows Server 2008 R2 [ID 1061272.1]
You can also try to use 11g client Please see:
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]
All note avaliable at:
Master Note For Oracle Database Client Installation [ID 1157463.1]
Regard
Helios

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insight

Found the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual.

Oracle BI Administration tool has stopped working

Just now finished the 11g installation.But im not able to open BI Administrator.Im getting this error.Please help.
"Oracle BI Administration tool has stopped working
A problem caused the program to stop working correctly.Please close the program"

I followed the below steps(taken from this forum) for installing OBIEE11g 64 bit version in a 64 bit machine.Installation completed successfully.But not able to open BI Administration tool.Any suggestions???
There is not a particular 64bit installation. I think it works like this: if you are using a 64bit JDK the apps server is also running 64 bit.
You can find the generic jar here: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html and take the generic one (http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar)
You install this by a command like this (you have to look up the documentation): java -XXm.... .... wls1033_generic.jar
Then a installer pops up.
So these were my steps:
- installed RCU
- installed 64 bits JDK (jdk-6u21-windows-x64.exe)
- installed Weblogic (wls1033_generic.jar)
- installed OBI as "software only"
- configured OBIi (config.bat you can find in <obi11g home>\Oracle_BI1\bin)
All together it does not take much longer then the 32bit install. Only some extra steps to do.
---------------------------------------------------------------------------------------------------------------------------------------------------------------

Instant client installation unavailable in ODBC data sources

I'm trying to install instant client to enable MS Excel to access an Oracle database. OS is Windows 7.
After installing instant client plus the odbc package, I can't see a new entry in the odbc data sources - only the standard Microsoft sources (Excel, Access, SQL Server) show up.
There's also an Oracle SQL developer installation on my computer. Connection to the database works fine in SQL developer - so the DB does exist and it is accessible.
Steps conducted during instant client installation:
- Downloaded basic lite instant client (11.2.0.3.0) for windows.x64
- Downloaded odbc package for windows.x64
- unpacked zip file to instantclient directory
- executed the odbc_install.exe in the instantclient directory. I'm not sure if this install.exe does anything at all. There was no error message but also no confirmation or reaction of any kind.
- executing the install file from the cmd window gave me a message, that the odbc drivers were already installed. So I guess odbc_install.exe was executed properly
- setting some system variables
     1) path variable: added instantclient directory to the ones already listed in path
     2) tns_admin: new entry, pointing to instantclient directory
     3) ld_library_path: new entry, pointing to instantclient directory
- wrote an tnsnames.ora file using the connect information also used in SQL developer
- saved tnsnames.ora file in instantclient directory
- rebooted computer to activate changes
When opening the odbc data source administration, I'm only able to see Microsoft drivers for Access, Excel, SQL Server. I'd expect to get an Oracle driver option to add to the installed drivers.
Wild & uneducated guesses about what might cause the problem:
- IC is installed on E: drive. Maybe some component is expected to be saved on C: (low likelihood, many others would have complained by now)
- Win 7 often asks for explicit permission to do this or that via popup windows. Maybe the odbc-component encounters such a request ans says "Ummm....???"
Any idea, what I might try to get an oracle entry in the odbc data source list?
Best regards
Peter
Edited by: 1003309 on 30.04.2013 05:33

I'm not sure to be honest, but what I downloaded did not have a setup.exe.
Does what you're talking about allow you to connect to Oracle databases via ODBC? If so, is it downloadble from the Oracle site?

MI 7.0 Client Installation

Hi,
I have NW Mobile 7.0 sp13 as MI server. I have downloaded the following files from the service.marketplace for MI client Installation.
NWMCLIENT13_0-20000910.SCA
NWMCLIENT13P_1-20000910.SCA (Patch)
Since this is a SCA file I can't install it directly.
Can anyone help me to proceed with it.?
Thanks & Regards,
Kapoorchand.

Hi Kapoorchand
From the sca file that you have downloaded, please use a winzip or winrar tool and navigate the way i have mentioned here to obtain the path for JSP setup.exe
NWMClient***.sca.zip -> NWM_JSP_WIN32.sda-> NWM_JSP_Win32.zip->setup.exe
Similiarly replace JSP by AWT and Win32 by WinCE to obtain other intallation files.
Hope this helps.
Best Regards
Sivakumar

BI Administration Tool in the SAMPLEAPP v207

Is there a BI Administration Tool in the SAMPLEAPP v207 that I can use. If so how do I open it up in the sample app?
Thanks,
Jon

yes there is an Admin tool. you can "download" the client tools from Home within OBIEE web interface.

Client installation Administration Tool

Similar Messages

Maybe you are looking for