Client Installing But Not All Components Are Available Post Install

Hi,
Now I am not positive how the posy client install process works but it seems the CM client normally installs and has only base components, then downloads a policy and installs the other components based on the policy?
I have 2 DP's that is PXE enabled. 1 DP works fine installing the CM client via task sequence on W7. What happens at the other DP is after the task sequence runs it seems like the CM client is stuck and won't install the additional components. The way you
can usually tell there is a problem with the CM client is there are only 6 of the 7 tabs present when you open the CM client and if you click on the Actions tab half the actions are missing. What logs should I be looking at to try and troubleshoot this?
Here is the policy agent log from the client that has the issues described above:
<![LOG[Processing PreShutdown event]LOG]!><time="16:39:11.202+300" date="02-03-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2832" file="policyevaluatorendpoint.cpp:1234">
<![LOG[Processing PostStartup event]LOG]!><time="16:39:19.344+300" date="02-03-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="1652" file="policyevaluatorendpoint.cpp:1228">
<![LOG[Policy Download Endpoint's message queue is empty; proceeding with maintenance work]LOG]!><time="16:39:19.344+300" date="02-03-2015" component="PolicyAgent_Cleanup" context="" type="1" thread="3000"
file="policyutil.cpp:12671">
<![LOG[Registered for MP notifications.]LOG]!><time="16:39:19.344+300" date="02-03-2015" component="PolicyAgent_PostStartup" context="" type="1" thread="1652" file="startuptask.cpp:113">
<![LOG[Not rerequesting policy on site code change in provisioning mode.]LOG]!><time="16:39:19.375+300" date="02-03-2015" component="PolicyAgent_ReRequestPolicy" context="" type="1" thread="2380"
file="rerequestpolicyendpoint.cpp:252">
<![LOG[Processing PostStartup event]LOG]!><time="17:31:10.918+300" date="02-03-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2396" file="policyevaluatorendpoint.cpp:1228">
<![LOG[Policy Download Endpoint's message queue is empty; proceeding with maintenance work]LOG]!><time="17:31:10.918+300" date="02-03-2015" component="PolicyAgent_Cleanup" context="" type="1" thread="2236"
file="policyutil.cpp:12671">
<![LOG[Registered for MP notifications.]LOG]!><time="17:31:10.918+300" date="02-03-2015" component="PolicyAgent_PostStartup" context="" type="1" thread="2840" file="startuptask.cpp:113">
<![LOG[Processing PostStartup event]LOG]!><time="17:31:49.368+300" date="02-03-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2376" file="policyevaluatorendpoint.cpp:1228">
<![LOG[Policy Download Endpoint's message queue is empty; proceeding with maintenance work]LOG]!><time="17:31:49.368+300" date="02-03-2015" component="PolicyAgent_Cleanup" context="" type="1" thread="2780"
file="policyutil.cpp:12671">
<![LOG[Registered for MP notifications.]LOG]!><time="17:31:49.368+300" date="02-03-2015" component="PolicyAgent_PostStartup" context="" type="1" thread="2776" file="startuptask.cpp:113">
<![LOG[Triggered update of user S-1-5-21-1078011946-2056399665-367356602-4899 settings]LOG]!><time="16:31:25.834+300" date="02-04-2015" component="PolicyAgent_RequestAssignments" context="" type="1"
thread="3176" file="policyevaluatorendpoint.cpp:1262">
<![LOG[Processing PostStartup event]LOG]!><time="08:43:15.373+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="3016" file="policyevaluatorendpoint.cpp:1228">
<![LOG[Policy Download Endpoint's message queue is empty; proceeding with maintenance work]LOG]!><time="08:43:15.373+300" date="02-05-2015" component="PolicyAgent_Cleanup" context="" type="1" thread="2156"
file="policyutil.cpp:12671">
<![LOG[Registered for MP notifications.]LOG]!><time="08:43:15.373+300" date="02-05-2015" component="PolicyAgent_PostStartup" context="" type="1" thread="3016" file="startuptask.cpp:113">
<![LOG[Triggered update of user S-1-5-21-1078011946-2056399665-367356602-4899 settings]LOG]!><time="08:43:16.153+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1"
thread="2152" file="policyevaluatorendpoint.cpp:1262">
<![LOG[Requesting Machine policy assignments]LOG]!><time="08:51:06.091+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2792" file="requestassignmentstask.cpp:1485">
<![LOG[Requesting Machine policy from authority 'SMS:MCT']LOG]!><time="08:51:06.091+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="2792"
file="requestassignmentstask.cpp:1549">
<![LOG[Synchronous policy assignment request with correlation guid {2BC97ED8-61B2-4B0D-AE85-00DDC29EA652} for Machine XXXXX completed with status 80004005]LOG]!><time="08:51:06.597+300" date="02-05-2015" component="PolicyAgent_RequestAssignments"
context="" type="2" thread="2792" file="requestassignmentstask.cpp:1843">
<![LOG[Requesting User policy assignments for 'S-1-5-21-1078011946-2056399665-367356602-4899']LOG]!><time="08:51:15.233+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1"
thread="4968" file="requestassignmentstask.cpp:1489">
<![LOG[Requesting User policy from authority 'SMS:MCT']LOG]!><time="08:51:15.249+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context="" type="1" thread="4968" file="requestassignmentstask.cpp:1549">
<![LOG[Skipping request for user policy assignments due to agent configuration for authority 'SMS:MCT'.]LOG]!><time="08:51:15.249+300" date="02-05-2015" component="PolicyAgent_RequestAssignments" context=""
type="1" thread="4968" file="requestassignmentstask.cpp:1621">
TIA

Clients stuck in provisioning mode are usually due to unexpected reboots or unexpected state changes within the task sequence. Double reboots caused by a handful of software updates are a common culprit as of late. Really, the only way to troubleshoot
this is trial and error. Remove things from your TS and run it again to see if the client agent stays in provisioning mode or not. Start with the Install Software Update task.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.
This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

Fair question
And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
Thanks.

Operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not listed in applications. have downloaded install app but cannot carry out the installation. am informed flash player is blocked.

operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash player.
thank you!

Hi Anne,
Your version of Safari is still supported. Please see Adobe Flash Player | Tech specs for supported OS and browsers.
If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari. This has nothing to do with whether or not Flash Player supports the browser.
I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it." Flash Player.plugin only works in the browser to view Flash content in the browser. The plugin does not open files outside of the browser. If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
Google Chrome does embed Flash Player in it, while Firefox does not. Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
Maria

When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.
So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so. I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines. My already
deployed servers seem to have picked up the PKI setting no problem. In the past when I would deploy a new windows client everything would be fine. When i converted over to PKI in my test environment I am now having issues when I go to deploy a
new windows client. I don't get all of the Actions listed in the Configuration Manager control panel. All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
Cycles, before all of them would populate no problem. I have let this machine sit here for several hours and nothing has changed yet. It does say PKI for client certificate. Sometimes when I would deploy new machines it would say NONE for
Client certificate. In my production environment it says self-signed. I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
Ok so maybe not all the time that when i reinstall the client it fixes it. I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
Does anyone have any ideas?

Hi,
I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
You can export and import the certificate by using MDT integration, try this blog for PKI part:
How To: Build and Capture in Configuration Manager 2012 using HTTPS
And in addition, you can upload the log to your onedrive so you can share with us.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Loop at screen - not all fields are available

Hi all,
I want to set some fields on the screen invisible.
When I do the loop at screen in PBO not all fields from the screen are available.
Just four fields are available. In the screen there are about 20 fields.
I try to use the chain. field xyz. endchain... But it was not the problem.
Any ideas?
regards

Try this ,May be Help ful
{ SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_cars.
PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_toyota .
PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_ford .
PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_bus .
PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_volvo .
PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_merced .
PARAMETERS : r_merced RADIOBUTTON GROUP rgb2 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT. " AT SELECTION-SCREEN OUTPUT
IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
    LOOP AT SCREEN .                       " Looping at screen
      IF screen-name CS 'R_VOLVO' OR
         screen-name CS 'R_MERCED'.
        screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'R_TOYOTA' OR
         screen-name CS 'R_FORD'.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF. }

Service Desk - Expert Mode - Not all actions are available

Dear SAP colleagues,
I have just implemented the Service Desk in our SOLMAN system.
1. I choose Incident Management
2. I click on Queries
3. I click on a ticket (Transaction ID).
4. I edit the message
5. When I select Actions, I only have the 4 following options :
    - Send Message to SAP
    - Maintain SAP Logon Data
    - Display SAP Action Log
    - Update SAP Message
When I consult some demos, there are many differents options available in Actions menu, as, for example :
- Open System fro SAP
- Confirm Message to SAP
- E-Mail to Message Creator (Mail)
- Print Message
- Create Change Document
- Call Solution Manager Diagnostics.
Is it due to an missing authorizations (roles and profiles) ?
Thanks for your input.
Best regards
CP2009

Dear Rajeev,
First of all, thanks for your input.
I have choosen SIVA when I have activated BC Sets.
Should I activate also BC Sets for transaction type SLFN ?
1. I have started SPPFCADM and follow your recommandations.
2. I have choosen CRM_ORDER
3. I have then click on "Condition Configuration (Transportable Conditions)
4. There are many entries related to the Support and Service Desk
Example : Support Desk Message Action Profile
I have 5 actions defined -
Action 01 : Send Message to Processor
Action 02 : Create/Change Basis Message from CRM Procedure
Action 03 : Send Notification to SAP
Action 04 : Update Message from SAP
Action 05 : Confirm Message to SAP
I have activate BC Sets for transaction type SIVA, not for SLFN.
Best regards
CP2009

How to request - Updating an embedded image in a PDF using Actions but not all actions are recorded

i am trying to create an Action in CS3 but some of my actions are not been recorded.
What i want to do is run the Batch option on a folder with a 1,000 PDFs in it. The PDFs
(which were created in Illustrator CS3) consist of a single page with a single embedded
image at the foot of the page. I am trying to update that embedded image.
The Actions i am trying to record are...
1) Select the single image in the Links palette.
2) Choose the "Relink.." option in the drop down menu of the Links palette.
3) Navigate to the new image and select "Place".
4) Save and close document.
But the first two actions are not been recorded.
How do i get around this problem ?
Note: From trying this manually the new image seems to take on the horizontal and
vertical scaling of the previous image which is what i want. But if i am going to have to
do a script then that is a factor that may have to be incorporated into the script.
Any help appreciated.

Give this a trial… It does a save as which is much safer than overwriting… At least you still have your originals should I get something wrong…? I did test but only with 3 files…
#target illustrator
function replaceImage() {
          var i, doc, fileList, inFolder, outFolder, opts, pic, rep, rip, saveFile, uIL;
          inFolder = Folder.selectDialog( 'Please choose your Folder of AI PDFs…' );
          outFolder = Folder.selectDialog( 'Please choose a Folder to save AI PDFs in…' );
          pic = File.openDialog( 'Please choose your replacement Image…' );
          if ( inFolder != null && outFolder != null && pic != null ) {
                    fileList = inFolder.getFiles( /\.pdf$/i );
                    if ( fileList.length > 0 ) {
                              uIL = app.userInteractionLevel;
                              app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
                              for ( i = 0; i < fileList.length; i++ ) {
                                        doc = app.open( fileList[i] );
                                        rip = doc.rasterItems[0].position;
                                        rep = doc.placedItems.add();
                                        rep.file = pic;
                                        rep.move( doc.rasterItems[0], ElementPlacement.PLACEBEFORE )
                                        rep.position = rip;
                                        rep.resize( 31.414, 31.414, true, true, true, true, 100, Transformation.TOPLEFT );
                                        doc.rasterItems[0].remove();
                                        rep.embed();
                                        opts = new PDFSaveOptions();
                                        opts.pDFPreset = '[Illustrator Default]';
                                        saveFile = File( outFolder + '/' + doc.name );
                                        doc.saveAs( saveFile, opts );
                                        doc.close( SaveOptions.DONOTSAVECHANGES );
                              app.userInteractionLevel = uIL;
                    } else {
                              alert( 'This Folder contained NO Illustrator PDF files?' );
replaceImage();

Adobe Customization Wizard XI with Reader XI-not all options are available

I'm using the Adobe Reader XI redistributable (yes, I got the license and special download, etc.)
I've followed the Enterprise administration kit which makes me extract and build an AIP. All is well
What I notice is that the Customization Wizard has some options grayed out.
For example, the DOCS for the customization wizard say that I can fill out username, organization, etc.
But those are grayed out.
Also, I cannot select the Installation Options -> Remove previous version of Acrobat (it's grayed out). I can only select the Remove all versions of Reader.
Any idea why this is?
I point it to the AIP reader .MSI File when i built the customization kit.

You should post this on the Enterprise Deployment forum but the username, organization, etc... are for Acrobat only. The ability to uninstall Acrobat is for Acrobat only. It would be a bad thing for Reader to uninstall a more capable product like Acrobat Standard or Acrobat Pro no matter what the version.

HT5731 If I purchase the whole season of a tv show (example; PLL 4) but not all episodes are avalible or out yet will I be able to just download them when they come out or will I have to pay extra for them?

I want to download a tv show but all the season havent come out yet and so half the season is unavalible. When they come out can Ijust download them straight away or will I have to pay for them again even though im buying the whole season?

Once you pay for a season, you get the entire season as it is released.

Coreapplication shows as down in OEM, but all components are up

Hi,.
Just upgraded from 11.1.1.5 to 11.1.1.6.2. All went fine and everything running. Also upgraded WLS from 10.3.5 to 10.3.6
Yet the core application shows as down in OEM although system status reads All components are available
weird .....
diagnostic logs show failed to get status for java components so looks like the console isnt communicating with opmn correctly? Not sure. Everything is running out of the same box except the database.
admin server log presents:
Failed to get status of all of OPMN components for one or more Oracle Instances of BI instance: coreapplication
Any bright ideas please ping them this way!
THanks
Edited by: 869150 on 23-Jul-2012 06:20

SR 3-5707809851 : Managed components missing from diagnostics after 11.1.1.5 to 11.1.1.6 in-place upgrade ==> Bug 14111737; fixed in 11.1.1.7.0.

Some, but not all, albums not displayed after Yosemite/iPhoto 9.6 upgrade

After upgrading to Yosemite and iPhoto 9.6, photos from some, but not all, albums are missing. All albums from the previous version are listed in the Library, but 12 of 15 are showing "(0)" with no contents.
Is recovery possible?
iMac 21.5in (late 2009), OS X 10.10.2
3.06 GHz Intel Core 2 Duo
4 GB Ram
OS X 10.10.2
iPhoto 9.6 (910.29)

Your best solution is to restore a backup copy of the library made just prior to the Yosemite and iPhoto upgrades.
Otherwise try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

When I back up my Mac Book Pro to an external hard drive not all files are backed up. Can anyone help please?

When I try to back up my Mac Book Pro to an external hard drive some of the files are backed up but not all files are backed up. I don't understand. Can anyone help please?

I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
Thanks for replying
John

I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients".

I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients". Does anyone happen to know the reason for this? It should have at least the same number of clients as the largest collection.
Thanks,
James
James A+, Network+, MCP

Hi James,
The All Desktops and Server collection only contains devices that show client=yes.
Meaning the Configuration Manager client is installed on those devices.
This WQL query will give you a collection of all devices that do not have the client installed.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where (SMS_R_System.Client is null or SMS_R_System.Client = 0) and SMS_R_System.Name != 'Unknown'
Another handy collection is all clients that are inactive (No communication for the default 7+ days)
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_CH_ClientSummary on SMS_G_System_CH_ClientSummary.ResourceId = SMS_R_System.ResourceId where SMS_G_System_CH_ClientSummary.ClientActiveStatus = 0
I normally create both and then a third collection of all devices and exclude the above two which should show you all healthy devices.
Have a look at the ccmsetup.log file on the client if it has attempted to install the ConfigMgr client but failed.

After reinstall not all apps are installed

Hi!
I've had the problem that my iPhone 3G freezed and the restart only shows the apple logo. So I started it in recovery mode, reinstalled iPhone, activated it and my computer and synced one time. All contacts, calenders and all settings were restored - wonderful!!!
But not all apps have been installed. But why? All apps are lying in the directory where the others are lying which were installed. After another sync nothing more happened. Then I double clicked an app-file directly and then it showed up in iTunes under Programs. After another sync some programs are installed on iPhone but not all.
So is this normal? How could I install all my apps?
Is it possible to download apps which I didn't synchronized before restore, because iTunes says there are no downloads available.
Thanks for help in advance!!
Greetings
Udo

As far as I know you shouldn't have ANY TROUBLES with the NATIVE APPS...you know like Safari, Calendar, Photos...etc. However, the apps that you download from the app store, I believe, need to be re-installed manually. This is what I have to do with my original iPhone with 2.0 software anyway. I would think that it is the same with the 3G.

Client Installing But Not All Components Are Available Post Install

Similar Messages

Maybe you are looking for