Client License applicable in windows server 2008 R2

Dear Sir/ Madam
I have purchase a windows server 2008 R2 and install properly and make this machine a Domain Controller. I have connected 5 client user with this machine because Microsoft provide 5 client access default windows server 2008 R2, now we need to access more
client from this server machine. so we have purchase some more license from Microsoft then how we install / implements or apply these license for client.
does these license install on server. ?
does these license install on client. ?
we have the following details about license.
Authorization Number:
License Number:
Distributor Purchase Order Number:
License Date:
Agreement Information:
Reorder/Software Assurance End Date:
Please resolve my quire.
Thanks & regards
Krishna +91-8459060870

Hi Krishna,
Thank you for posting in Windows Server Forum.
From your description it seems that you have purchased CAL for your client to get access. Whether you have purchase simple server CAL or RDS CAL (Per user or Per Device).
If you have purchase RDS CAL then you need to have install RDS License role service and then first need to activate the RD License server. After activating we can configure the RDS CAL on RD License server and for this you might need to call the MS clearing
house, explain them your situation and they will help you to activate and configure everything. After that we also need to point our RD License server to RDSH server.
For more information, you can refer below article.
Configuring Remote Desktop Licensing
http://technet.microsoft.com/en-us/library/cc754309.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

8.8 Client cannot connect to Windows Server 2008 error -1102

SAP Business On 8.8 on PL 18
This is not the first time I have had this issue with Windows Server 2008.
however everytime the resolution was diffrent. Now this site is causing trouble.
The issue is the client cannot connect. We have the log on window, can see the company list. type on the password and we get a -1102 error.
The client on the Server itself can log on. It is the cleints that cannot.
I checked these below.
1 SQL Native client is installed and ok.
2. Licence server is configured and ok
3. The user has admin access to locl PC
4. The SAP user name and password are correct ( client on server can connect fine )
5. The ports 1433, 30000 and 30001 are open on the server.
6. Through SQL server configuration the named pipes and TCP are enabled.
7. SQL server browser is running
The only things I have not tried are
The Firewall is running on the server and I have not yet stopped it. Will try that tomorrow.
Do you have any other ideas please ?

I have got this working but I am not confidant of the outcome - yet - I really need your expert advise here.
This is what I did. In that order.
1.     As Owen suggested I checked if there was a specified Port for the instance. What I found was TCP Dynamic ports were enabled ( SQL server config manager | network configuration | tcp properties ) and there was no TCP port specified. Assuming ( ai may be wrong) that the system assigns a dynamic port to this instance I set it up so the Dynamic port does not happen and manually specified the Port 1433. Restarted the SQL Service. ( still having the Port 1433 open in the firewall). This did not solve the issue.
2.     With the above setting still on, switched off the firewall. Went to the PC client and SAP can log on now. Now keeping the SAP client running, switched on the Firewall on the server. Log off SAP on PC client and log back in ( with firewall off ). SAP now can log on.
3.     I had to do the above step for all PCs to get them working.
4. Currently the firewall is on and clients can connect
So what could be happening? I have no clue. It is apparent there is some setting that gets saved within the PCs ( may be user profile) after the first log on with the Firewall off - to say its safe ?
However I have no idea what will happen if the server is restarted u2013 this server we cannot restart any time we want as itu2019s a critical server and runs other things.
I would still like to get to the bottom of this to understand what is happening.
I have a SAP message running too and will ask them this same question.

Intermittant disconnection of Shared Drives on Windows 7 Client machines hosted in WIndows Server 2008 Standard Edition

The environment - Windows Server 2008 Standard/Windows 7 32 bit Client machine.
Share - It is not a DFS share.
Antivirus - McAfee
The issue - 1 user is unable to connect to a particular shared drive hosted from within the Windows Server 2008 Standard file server. This drive is one of the multiple drives which are supposed to be connected to the user machine during logon using
the logon script. All the other drives mentioned in the logon script gets mapped fine but one particular drive does not. The user uses a laptop and we have checked his connections while in LAN, Wireless, VPN. Everything seems to be working
fine apart from this one shared drive. Rest of the users within that office gets the drive fine but just not this one user. Since we are not domain admins so we do not have a visibility of the group policies linked to this particular drive and
hence RSOP as well does not help. We have not seen the user getting logged into the machine using a TEMP profile as well for us to ascertain that the issue may be with a TEMP profile logon.
Please note that the drive does get connected at times and at times the connection just drops off! As an interim measure the local IT has created a batch file and given it to the user which maps the drive for the user.
Any help in resolving this long impending issue would be much appreciated!
Suman

Hi Suman,
You could keep the session always active to workaround this issue. Please open Control Panel -> Administrative tools -> Local Security Policy -> Local Policy -> Security Options and set the value of the policy Microsoft Network Server:Amount
of idle time required before suspending a session to 99999 and see how it works.
This security setting determines the amount of continuous idle time that must pass in a Server Message Block (SMB) session before the session is suspended due to inactivity. Administrators can use this policy to control when a computer suspends an inactive
SMB session. If client activity resumes, the session is automatically reestablished. For this policy setting, a value of 0 means to disconnect an idle session as quickly as is reasonably possible. The maximum value is 99999, which is 208 days; in effect, this
value disables the policy.
For more detailed information, please refer to the thread below:
Loss of mapped drive, networked drive disconnects
http://social.technet.microsoft.com/Forums/windows/en-US/c6da707b-5224-40f5-8d0e-e8985453221d/loss-of-mapped-drive-networked-drive-disconnects
You could also refer to the article below to troubleshoot the issue:
Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Macbook clients cannot connect to Windows Server 2008 RRAS with L2TP/IPSec

Hi everyone,
I had installed "Remote and Routing Access" or a VPN server on Windows Server 2008. The connection type set up is L2TP/IPSec. All the Windows clients can connect to the L2TP/IPSec VPN server without problem but Macbook users are facing problem.
The Macbook users got the error message "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator."
I think it is something related to the pre-shared key encryption but I am not sure. The Macbook users could connect if the connection type is changed to PPTP on server and clients side. I searched for similar problems and solutions online but no luck, I couldn't find solution that helps. I found this is a common problem faced by many macbook users.
Does anyone have a solution or suggestion for this, please? I appreciate all the helps and suggestion given.
Thanks,
CK

Hi,
Thanks for the question, however, this forum is for Remote Desktop Clients related questions.
Regarding the issue, as Windows clients can connect with no problem, I suspect that it is a Mac side issue and I would like to suggest you contact Apple support for help.
Thanks.
Jeremy Wu
TechNet Community Support

How to setup the 'Client Licensing Mode' for Windows server?

Hello,
We will install the SBO server:
OS: Windows Server 2003 Standard Edition
SBO Clients: 150
How should we setup the 'Client Licesing Mode' for the windows server?
If we select the mode "Per server,Number of concurrent connections", how to set the connection number?
Thanks in advance.
Don

Hi..
you can set License to Particular user using License under Administration and Client will automatically fetch License using License Manager on License Server
Regards,
Bhavank

Oracle 8.1.7.3 client on Windows Server 2008 64bit

Hi all!
I'm a newbie to Oracle and this forum, so please be gentle...:)
I'm trying to install Oracle 8.1.7.3 client on a 64bit Windows Server 2008, without success. Best result I got so far is 'installed' client and provider, but unable to run the config tools, or use the provider. I installed the same client on a 32bit version of Win Server 2008 and it worked with few minor tweaks.
Reason I'm doing this is trying to integrate an old legacy Oracle 7 database with SQL Server 2008 using linked servers.
Upgrading to a recent version is not an option.
Anyone has any guidelines? please help, this is driving me nuts!
Thanx,
Igor

user12219185 wrote:
hmmm i'm trying the download on http://edelivery.oracle.com, but can't find 64bit client.. it has 64bit database version, which is 2 cds... is the client included?
The client is included. Download it and start the installation. It should give you an option to select 'client only'.

Activating Windows Server 2008 R2 Enterprise 180 Eval after Upgrade from Win2K8R2 Standard

I had a licensed instance of Windows Server 2008 R2 Standard. It is an OEM License.
I wanted to try Windows Server 2008 R2 Enterprise for 180 days without rebuilding the whole machine so I entered "DISM /online /Set-Edition:Enterprise" on the command line and now I can use the enterprise features.
The problem is that I have 30 Days to activate. When I attempt to activate, it says "Error: 0x8007232B DNS name does not exist"
How can I activate the 180 day trial?

I had a licensed instance of Windows Server 2008 R2 Standard. It is an OEM License.
I wanted to try Windows Server 2008 R2 Enterprise for 180 days without rebuilding the whole machine so I entered "DISM /online /Set-Edition:Enterprise" on the command line and now I can use the enterprise features.
The problem is that I have 30 Days to activate. When I attempt to activate, it says "Error: 0x8007232B DNS name does not exist"
How can I activate the 180 day trial?
"Error: 0x8007232B DNS name does not exist", suggests this server is now configured as a KMSclient, and it is trying to contact a KMShost to perform activation. It is not being returned any SRV records from your DNS, when it queries for _vlmcs._tcp
If you do not have a KMShost server implemented, you need to input a suitable ServerEnterprise product key.
When you purchase your ServerEnterprise license, you will be given a product key to use for this.
For this task, you can use slmgr.vbs /ipk
For your trial, you could use the method slmgr.vbs /rearm
this will only succeed 3 times, I think.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Windows Server 2008 SP2 randomly reboots due to lsass.exe failed with status code 255

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

Windows Server 2008: Add Links to Desktop

Hello,
Does anyone know if it is possible to add hyperlinks to videos or documents to client's desktops on Windows Server 2008? I am trying to use a similar functionality to Active Desktop which allows desktop wallpaper to be .html files.
Thanks

Yes, create an IE shortcut for the hyperlink and simple shortcut for the documents, with GPP it's easy with GPO. (Adding
shortcuts on desktop using Group Policy Preferences in Windows 8 and Windows 8.1) (wrote for windows 8, but the same gpo can be applyed to 2008R2)
Regards, Philippe
Don't forget to mark as answer or vote as
helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

Client can not connect to Server installed window server 2008 and using 8.8

HI all!
I have a problem when Client log in to server that installed window server 2008.It can not connect to this server even when restart and key in IP or Server name,...
I try disable Firewall of window 2008 in server machine and client can connect to server. But when i disable firewall, it's mean i can not use Remote desktop or terminal service..
Now, how i can do in order to solve this problem.
Thanks!

Hi,
Take a look at the admin guide (Page 75, 119, 159):
[http://service.sap.com/~sapidb/011000358700000150922010E.zip]
If you installed a firewall on the license service computer, make sure that the firewall is not set to port 30000; otherwise, the license service cannot work.
If you are using Port X, make sure that you open Port X and Port (X+1) in the firewall. For example, if you are using port 10000, make sure to also open port 10001.
The default communication port is 1143.
The default port of the SAP Business One license server is 30000 for license communication and 30001 for the license naming service

How to get CAL license type from installed window server 2008 r2

Hi,
we have domain controllers which is installed with windows server 2008 r2 datacenter. now we need get the cal information of that servers like whether its per device or per user. can I get the information from an installed server. any scripts?
Thanks, Venkatesh. "Hardwork Never Fails"

Hi Venkatesh,
As Diramoh suggested, we do not need to install CAL in Windows Servers unless it is RDS CALs. You can put the document into your administration papers.
However, if you need further assistance about license, it is recommended to visit the Volume Licensing Microsoft Licensing Center.
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=2
Best Regards.
Jeremy Wu
TechNet Community Support

Windows Server 2008 Server Manager - The WinRM Client Cannot Process the Request.

Hello,
I have recently purchased a Dedicated Server, and I have installed Windows Server 2008 R2. I want to use Server Manager because I don't really have that much experience with command line commands, so I wanted to use server manager, I can remotely connect
to my server but when I use Server Manager I get the error "The WinRM Client Cannot Process the Request, if the authentication scheme is different from Kerberos..." I haven't set up a domain between my PC and the Dedi, as I do not know how/or know
if this is applicable in this situation.
Thanks for your time!
Bill Gates Mate

Hi,
If you are using the non-domain management method, please refer the following article to add the trust host.
The related article:
Remoting Week: Non-Domain Remoting
http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/29/remoting-week-non-domain-remoting.aspx
More third party article:
The WinRM client cannot process the request. If the authentication scheme is different
http://technico.qnownow.com/the-winrm-client-cannot-process-the-request-if-the-authentication-scheme-is-different/
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites;
therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure
that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Unable to install SCCM client on Windows Server 2008 R2 - certificate permission error?

I am trying to comply with corporate policy, which is, have an SCCM agent or client on every Windows device. I have successfully used the provided SCCM installer on other Windows 2008 R2 servers. However for one particular server I cannot get the SCCM agent
to install successfully. I've searched forums and documentation, but can't find a solution. Part of the problem is the lack of feedback by SCCM on what is wrong. I think I have narrowed down the symptom to the following error messages from the "C:\Windows\CCM\Logs\ClientIDManagerStartup.log":
[LOG[Certificate [Thumbprint C559304C1598F17641D0732EB9EB787169A25FA7] issued to 'SMS' doesn't have private key or caller doesn't have access to private key.
[LOG[Failed in GetCertificate(...): 0x87d00281]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="ccmcert.cpp:2122">
[LOG[CCMCreateAuthHeaders failed (0x8009200b).]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="clientauthutil.cpp:978">
When I use the Certificates MMC snap in to look at installed certs on this Windows Server 2008 R2 machine, there are plenty of normal and expected certificates there. There is also a branch called SMS with hundreds of entries, I have no idea what that is.
The above error seems to indicate a permissions issue. What do I do to fix this SCCM install? It seems like a server cert issue, not an SCCM issue, so I'm posting to the Windows Server forums.
Thanks in advance.
Thanks

this maybe helpful...
http://www.jamesbannanit.com/2011/04/certificate-requirements-for-sccm-2012/
should be asked in SCCM forum...
http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagerdeployment
Best,
Howtodo

Client License applicable in windows server 2008 R2

Similar Messages

Maybe you are looking for