Clip appearance not displaying in event browser in filmstrip view

Some of the clips in the event browser don't display a visual in the filmstrip view until I skim over it.  Any clue?

Here is a solution to the problem: 
In the Finder -> Go -> Go to Folder,
enter   /Users/Your user name//Movies/iMovie Library.imovielibrary/Name of Event/
(Name of Event is exactly as it appears in the Event Browser)
Select Go
This takes you to the folder in iMovie Library for that event, and you will see the contents of that folder as several folders and perhaps a file.  One of the folders is Original Media.  Open that folder and you will see individual files of the individual clips contained in that Event.   Delete the file of choice in the usual OS X way. iI will then appear in the Trash folder.  Empty the trash and it is gone.
This solution was suggested by Shirt Pocket Support, which provides technical help for the backup app SuperDUper.  I am indebted to them.
Bob Stokstad

Similar Messages

  • Audio Waveforms (On Certain Clips Only) Not Displaying

    Long time forum-lurker, first time poster.
    Here's the situation: The nighttime assistant editor created a sequence of B-roll clips for an editor. On both the editor's and the assistant editor's computer, the audio waveforms for these clips are not displaying correctly. Specifically, the symptoms (on both computers) are:
    - Waveforms do not appear in timeline unless zoomed in to maximum or second-to-maximum zoom. When zoomed out farther than that, the "X"es appear.
    - When viewing the clip in the viewer's audio tab, either by double-clicking the sequence clip or match-framing from the sequence, the waveforms do not appear at all until I zoom in to near maximum level. When zooming out after that, the remnants of the zoomed-in waveforms remain on the screen.
    - The waveforms of other clips display correctly.
    I have tried deleting the waveform cache on both computers, changing the location of the waveform cache and restarting, and deleting the preferences on the editor's computer. I have not tried recreating the sequence from the original clips because the daytime assistant editor has more sequences to create and needs to use her computer.
    If anyone can help me, that would be great.
    Here are the specs:
    Assistant Editor's Computer: eMac running Final Cut Pro 5.0.1 and Mac OS 10.4.something (I haven't gotten a chance to run software update).
    Editor's Computer: Dual Processor Power Mac G5 running Final Cut Pro 5.0.4 and Mac OS 10.4.8.
    Both computers are sharing the same media which is located on our SAN. The Editor's computer (along with two other G5-based editing systems) is connected via FibreChannel. The Assistant Editor's computer (along with a whole bunch of other computers) is connected through our server, which serves the SAN drives as network volumes. Assistant editors create sequences on the eMac and upload the project file to the server, where they are available for the editors to download.
    Power Mac G5 and eMac   Mac OS X (10.4)   SAN: Xserve RAID, CommandSoft FibreJet (not Xsan). Server: Xserve (Intel model)

    Don't know what's going on, but tell us the format of
    the audio.
    It's the audio track from a video clip. All video on this project is DV NTSC. The audio is 48.0 Khz, 16 bit, 2 mono channels.
    Also, try copying
    one audio clip to a local drive and see if the
    problem persists.
    Copied one of the offending clips onto the desktop. Dragged it into the project. Opened it in the viewer and hit the Audio tab. Whaddya know, the waveform appeared.
    I cut a chunk of it into the sequence that is full of clips whose waveforms don't work and turned on "show audio waveforms". Waited for a long time and I still just got the Xes unless I zoomed in really close to the new sequence clip.
    But then I cut a chunk of the newly copied clip into a brand new sequence, turned on audio waveforms in the timeline, and they showed up.
    I don't know if any of this will help to solve my problem, but hopefully it will give someone an idea. I've got an editor who says he's used to editing from waveforms and needs the ability to see them. (Unfortunately, copying media to local drives is not a viable workaround. The media must stay on the SAN.)
    Power Mac G5  

  • When I burn a disc from a playlist in iTunes, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

    When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

    No, this standard has been implemented for several decades.
    How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
    It is just conceivable you burned a CD that exactly matched one already in the Gracenote database.  Gracenote uses track count and duration to decide what CD it is you have in a computer.  If you have one that matches that it will label it.  You could conceivably even have one that matches it that is not the correct one.
    This script will only work on Macs:
    http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes

  • How do I list in the Event Library clips that are in the Event Browser?

    Footage is from iPhoto.
    Thanks.
    Erin

    Hi Erin,
    As the footage is from iPhoto, the clips will appear in the item "iPhoto Videos" in iMovie's Events Browser. When you click on the heading iPhoto Videos, the clips will appear in the thumbnails panel to the right of the heading - these will be in chronological (date) order. This is unlike other videos, which are listed in the Events by individual name and grouped by disk and by year.
    I trust this is what you are referring to.
    John

  • CF8 - pdf files do not display in a browser

    We are setting up the multiple instance capability using jrn4 with cf8,
    with apache 2.x on Redhat linux 5.X.
    For the when browsing to the main cfusion instance I can see pdf files
    but if I go to the document root of an instance, pdf files are not displayed.
    Infact it hoses whichever browser you are using.
    I can see cfm, txt, html files.
    Anyone have an idea what is happening?
    paulw

    I tried your recommendation of turning off coldfusion and it
    appears the problem of not being able to display
    a pdf file has nothing to do with coldfusion or with apache.
    The problem appears to be how we are mounting the documentroot on a linux server
    from a windows file server using a cifs mount.
    It seems to handle text files properly but not pdf files (it may have problems
    with other types of files), perhaps it is an issue with end of line or end of
    file which is confusing things.
    This is the mount command we are using
    //win_file_server/xyz     /data/xyz          cifs   user,ro,credentials=credentials,uid=48,gid=48,file_mode=0755,dir_mode=0755
    The credentials file contains
    username=some_name
    password=xxxxxxxx
    uid=apache
    gid=apache
    filemode=0660
    dirmode=0770
    nosuid
    nosetuids
    It works file if the documentroot is on a mounted unix file system, but not windows.
    Does anyone know if mounting a windows file system can work properly?
    (Perhaps we are missing some additional settings).
    paulw

  • Report is not displayed on the browser

    We have a 9iAs Oracle application(built in developer6i(forms and reports) patch12).The database version is Oracle 9.2.0.6.0.My problem is I have a report that is called from the form. If the print_receipt = 'Y', display the report.I have also an afterreport trigger that updates this print_receipt to 'N'.Somehow the afterreport trigger fires before the report is display thus giving a blank pdf output on the browser.My user has new pc and new operating system, Windows XP but they're still using Novell Netware for signing on to the network. Before she does not have any problem displaying the report, she was using Windows NT4 and Novell Netware for signing on to the network.Is there any limitations in Windows XP that interferes with the report? Is this known problem in report's afterreport triggers?Is there a workaround here so the report can be displayed?Thanks for the help.

    Hi,
    Try this may be it will help.
    Go to Iexplorer property - settings - Change (Check for newer version of stored pages to Automatically.
    This error is coming because the report runs twice, so the after report trigger is fired before anything is displyed & hance your report is not displayed.
    Thanks,
    Awadh

  • ICal not displaying all events in Month view, leaving unused blank space

    I think this is a bug or bad programming of iCal:
    In the month view, I have for example a day with 5 or 6 events. When I change the size of the global iCal window, the size of each day is of course changing, displaying more or less of the events on that day; and displaying "..." when additional events exist but can not be shown. This is all fine... and normal...
    However, I noticed that iCal is simply not making use of the whole space: when my day is bog enough to display all events, iCal is still only displaying half of them, and the "...".
    This is really a pity as the white space is there.
    Anybody observed the same behavior?

    Hey, thank you.
    But how do I change the font and its size?
    I tried....
    Thanks,
    Janos

  • Will not display pdf in browser window -

    will not display downloaded acrobat files from the web in browser window - safari -
    can save same download and view in acrobat and/or preview.

    Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
    If you are running Lion v10.7 >  Known Issues | Adobe products on Mac OS 10.7 Lion

  • ICal will not display correct "event" times

    Have iMac (21.5-inch, Late 2012), OS X Yosemite (10.10 ) and iCal app suddenly will not display the correct Event times that I have designated in the little pop up box? Any ideas about what I can do to reset iCal or fix this annoying error in the app?
    Thanks!
    Marilyn

    Hi,
    Have you tried turning it off in iCal's Preferences and then back on again?
    Best wishes
    John M

  • Nodes and links are not displaying in IE10 browser - mapviewer ps6

    Hi,
    Node and link are not visible on the IE10 browser where as in IE9 they are displaying properly.
    In IE10 browser ,
    when we set compatibility settings - Display All websites in compatibility view --> node are displaying properly.
    when we deselect this node are not displaying properly
    Is there any existing bug on mapviewer?
    Thanks in Advance
    Aruna

    DRK Montreal,
    try opening Terminal, and running the following command in the Terminal window:
    nslookup www.pinatize.me
    If you still have access to some of those other Mac computers, try running the same command on them also for comparison.
    Please include in your reply the full output from that command.

  • SWFs containing 3d movie clips do not display correctly

    I'm having difficulty using a swf with a 3d movie clip, it's displaying much larger in captivate than it does in any other context.  Are there known issues with 3d clips in captivate?

    Hi GCemb,
    Thank you for contacting Adobe Support.
    Can you please and insert an .mp4 3D video clip using though Event video option in Adobe Captivate.
    We tested the same at our end and the video is working fine.
    Thanks
    l.oveesh

  • 911- textarea captured but can not displayed well on Browser with linebreak

    Please have a look at point 1 and answer point 2. Please do any suggestion
    1.
    Here is a test.jsp code:
    <script language="javascript1.2">
    function OK()
    alert(document.frm.textarea.value);
    return true;
    </script>
    <%
    if (request.getMethod().equalsIgnoreCase("POST"))
    out.println(request.getParameter("textarea"));
    else
    %>
    <form name="frm" method="post" onSubmit="return OK();">
    <textarea cols="10" rows="5" name="textarea"></textarea>
    <input type="submit">
    </form>
    <%
    %>
    2. when I enter
    this is a test
    thsss
    we get the msgbox display
    this is a test
    thsss
    which is OK.
    Now when we're back to the server, which send to the brower
    this is a test
    thsss
    but the Browser could not display as it is. On the browser, I use view source and see exactly whatever we entered
    (/n or /n/r)
    -- Paul.

    the esiest way to make it work is to use <pre></pre> tag. In your case it will look like
    <script language="javascript1.2">
    function OK()
    alert(document.frm.textarea.value);
    return true;
    </script>
    <style>
    pre{font-family:verdana;};
    </style>
    <%
    if (request.getMethod().equalsIgnoreCase("POST"))
    out.println("<pre>" + request.getParameter("textarea") + "</pre>");
    else
    %>
    <form name="frm" method="post" onSubmit="return OK();">
    <textarea cols="10" rows="5" name="textarea"></textarea>
    <input type="submit">
    </form>
    <%
    %>
    Notice that I used a style sheet to change the default font for <pre> (you can write your own style sheet). Good Luck.

  • Calendar list does not display all events of the day

    Using calendar on iphone 3GS, I've found that if I select the 'list' option then not all the events in my calendar display. It's a pain to have to keep reverting to 'day' option to double check that I'm not missing any events. Does anyone else have this problem? Is it a bug or is there something I can do to correct it?

    I have exactly the same problem, I expirienced it today the first time, but I actually do not use the list view often. In the list view, I'm missing quite a lot of events, I first thought it went something wrong with exchange sync and tried around about an hour till I found out, that all events are basically on the phone and also shown in day and month view, but not in the list view.
    There seem to be a general problem with the list view, as I found this discussion:
    http://discussions.apple.com/thread.jspa?threadID=2260803
    Greetings
    Bernhard

  • Charts in Apex 3.2 demo application do not display in Firefox browser

    Hi,
    just installed Apex 3.2 and launched the demo application using Firefox 3.5.7
    The charts are not displayed. Switching to MS Internet Explorer everything works fine.
    Is Firefox not supported or any idea what's missing to display the charts ? Adobe flashplayer 10 plugin and Adobe SVG 3.0 are installed on
    my WIN XP client.
    Regards, Werner

    It kept bugging me .. so I worked on it a bit.
    The charts actually show, then get hidden by the noplugin funciton.
    The problem is in Firefox ( the (ns || mo || !win) branch) the plugin check does not work.
    When I use either this, the check for SVG feature:
    function supportsSvg() {
    return document.implementation.hasFeature("http://www.w3.org/TR/SVG11/feature#Shape", "1.0")
    and
    hasSVGSupport = supportsSvg();
    or a check by mime types , like this:
    var hasSVGSupport = false;
    if (navigator.mimeTypes != null && navigator.mimeTypes.length > 0) {
    if (navigator.mimeTypes["image/svg-xml"] != null)
    hasSVGSupport = true;
    I get the correct result and the charts display (remain displayed).
    I simply modified plugins.js and use my modified version instead.
    if (ns || mo || !win) {
    if (hasSVGSupport) {
    null;
    } else {
    noPlugin('svgRegion');
    Hope this helps,
    K

  • Some artists not displaying in iTunes browser but load fine under search

    I'm having an odd problem with iTunes that has been digging under my skin. Some of my Artists aren't displaying under the Artists pane in the browser. An example of this is my Eazy-E collection. If I serac for Eazy-E all of the songs display and the Eazy-E field is filled out for Artist. Yet under found artists it displays 0 and under found albums it displays 1 which is the number of albums I have for that artist.
    It even does this for songs I've recently purchased from the iTunes music store. I purchased some Pearl Jam and it doesn't display in the browser, I have to do a search to load the songs. I've tried everything, including rebuilding my iTunes library. What can I do I'm desperate?

    The albums are listed under Compilations.

Maybe you are looking for

  • Quantities captured in Purchase Order from Sales Order

    Hi, Here is the scenario: 1. Sales Order: Ordered 2 units of item A. 2. Item A in warehouse = 1 unit. Therefore, I'm short of 1 unit. 3. Tick Purchase Order in the logistic tab. 4. When I click Add sales order, Purchase Order confirmation window appe

  • How do i put firefox on a flash drive

    How do i put fire fox on a flash drive so that i can install it on a PC that has a corrupted IE

  • HTMLDB_item.Date with row selector

    Hi : In my application i am using htmldb_item.datepicker and row selector to insert the date object wise the problem wht i am facing is if suppose 10 rows are generated when i select 3rd row date and insert date picker date get populated in 2nd row s

  • PostProcess event handler for trusted recon -11G Release2

    Hi all, I am disabling a user in post process eventhandler bulkExecution method. When the event handler is triggered does the user is already created at OIM? Do I modify the already created user? Or all changes done to any user during the orchestrati

  • Password Protecting a Blog

    Hi there, I am trying to create a blog on my new website but I want to password protect it. I read that you can only password protect the entire site, not single pages. I just figured it being a blog there could be some way you could keep some people