Clip imports without the audio...

Using FCE I'm importing small a/v clips, but once they're in FCE they don't have any audio.
What am I doing wrong?
Thanks!
-Jeff

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
society of the dilletanti   Mac OS X (10.4.5)   T plus three and counting ...

Similar Messages

  • Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    No.
    OT

  • When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.

    When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
    Thank you for your help!

    Download/install an app is a know possible solution.
    3. Install another app from the App Store
    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    Above from Apple's :
    iOS: Troubleshooting applications purchased from the App Store

  • GoPro and 5D clips importing without video

    I have several GoPro .mp4s and a few 5D .movs, and I cannot get them to import into Premiere CS6 Mac 6.0.2 with the video included in the clip. Only the audio imports in whether I cmd+I, drag and drop or use Media Browser.
    The clips play fine in VLC and Quicktime, and FCP7 can import them just fine, so this is a real head scratcher for me. I'm used to .MTS and .MXF issues, but not my reliable 5D stuff!
    I've never seen this kind of error before and I'd like to avoid transcoding. I have started fresh projects and tried importing and the same issue occurs. Is this an issue with my preferences, a bug in my install or something else?
    Thanks

    hi tati,
    welcome to the  board
    you probably try to import mpegs (iMovie is meant for import from miniDV camcorders....)
    mpegs need conversion, get for free Streamclip and convert your "clips" into something usefull - WITH audio...
    hope, that helps.........

  • How do i delete a part of a clip and rejoin the audio on each side

    How (or where in the manual are the instr) l) do i delete a part of a clip and rejoin the audio on each side. This is most frustrating. The join command is never available. If i select an area to delete everything above and below is deleted, whether or not its selected and whether or not its mute. I find in the manual only ways to move entire clips. I need to remove 2 words from a clip in one track.

    i'm assuming your working in the multi-track mode since you didn't specify. select the razor blade tool and make two cuts to the audio, one where you want the cut to start, the other where you want the cut to end. select this smaller region that you want to delete and press the delete key.
    now you'll have a gap of silence where that unwanted clip was. select the clip(s) to the right of the cut and drag them left. the default behavior is to do a cross fade when the clips overlap. you'll probably have to play with the cross fade amount in order to get it to sound natural.
    hope that helps!
    scott
    PowerMac G5 2.5GHz   Mac OS X (10.4.7)   MacBook Pro 2.0GHz

  • Can you import only the audio?

    In the latest version of FCPX, is there a way to import only the audio and not the video (I'm dealing with AVCHD files, if that matters)?

    No. But, once you get the media into your event browser there is an easy way to bring just the audio to your timeline.

  • Moving a clip in timeline without the audio overwrite.

    is there a way to move a clip in a busy timeline in a way that the audio will not overwrite another audio.
    I'm dragging the video  to a clear spot on a higher track but the audio part of the clip remains in the same track (which is occupied by another clip).
    thanks
    arikw

    I found how to do.
    you drag the video portion of the clip downward pass the bar separating video and audio track . the video will remain in video track 1 and the audio will move to a different track.
    arikw

  • MULTICAM CLIP, retiming without affect audio

    i am editing a multicam project, in time line  i want to retime a clip without to affect the audio, so i lift it from storyline, press cmd r and retime, but the angle audio too is affected i want to speed up just the video  and to fill gap with brolls pictures, graphic or whatever. thanks.

    My first thought was the same as Karsten's, but then I checked and, indeed, "Detach Audio" does not seem to be available in a multicam clip.
    I was able to do what you asked by adding a new angle. Made a copy of the existing angle and pasted into this new angle. Now you can use one angle just for the audio and you can do anything you want with the video in the other angle.

  • How do you match the video duration of multiple clips to match the audio?

    If 'Windows Movie Maker' could do this..... come on! There's gotta be a way. I have multiple video clips that equal a duration of say 10 minutes. My audio file (that consists of 2 songs) equals say 7 minutes. HOW DO I SELECT ALL VIDEO CLIPS AND MATCH THEIR TOTAL DURATION TO EQUAL THAT OF THE AUDIO?

    HOW DO I SELECT ALL VIDEO CLIPS AND MATCH THEIR TOTAL DURATION TO EQUAL THAT OF THE AUDIO?
    It's called "editing".
    If you don't want to do it, hire someone or fire up Windows Movie Maker.
    On the other hand, Apple seems to be headed down the "design the software for the lowest common denominator" path lately. Perhaps Final Cut X can do this? You might ask over in that forum.
    x

  • After Upgrading to 10.1, all clips have lost the audio component.  Is there any way to get this back?

    I have recently updated Final Cut Pro to 10.1, after this upgrade (as well as an upgrade to Maverick) non of the video clips in ANY event or project have any sound component.  I have a backup of the project and event files before the upgrade, but I have no idea how I can get the clips back and if I do how I can update the numerous projects I have that no longer have sound.  Has anyone else had this problem, if so were you able to fix this?  Or am I just doing something wrong?
    The clips have no wave form when I look at them so it's almost like they have been stripped of sound.  If I goto the event browser and say reveal in finder, I am taken to Original Media, but these are tiny files that can't be played in VLC - they almost look like shortcuts or dynamic links or something...
    Can anyone help me get the adio back on these or should I revert back to a previous time machine backup and not update to 10.1?
    Thanks
    Richard

    Not sure what made the files lose the audio, but the solution for my issue was:
    In Final Cut, right click on a clip in the event viewer, Reveal in Finder
    Close Final Cut Pro
    Export orginal clips from Aperture.
    Copy exports into folder that the original meda was in, replace all
    Open up Final Cut Pro
    Load project again, it will start analysing the audio...
    Job done

  • Importing changes the audio quality of original video

    When I import a video into a new project the audio sampling rate of the video goes down and the audio channel changes to mono though the video is stereo.
    I have tried creating new projects changing the sequence presets to ones that include the higher sample rates and stereo, but this didn't work.
    More info on the original raw video:
    AVI
    Frame size: 1280x720
    Frame rate: 29/frames per second
    Data rate: 5000kbps
    Total bitrate 5192kbps
    Audio:
    Bit rate: 192 kbps
    Channels: 2 (stereo)
    Audio sample rate 44kHz
    When I drag and drop this video into the project section of premiere, and I click the "Info" tab, I notice that the audio is "11025 Hz - 16-bit - Mono" which is different from the original video.
    Does anyone know why this is and how I can fix it?
    Thanks!

    It might help if you were to post a screenshot with the
    full details (codecs, etc.) of the .avi file in question.
    Here are a couple of free utilities for media file inspection:
    GSpot
    http://www.headbands.com/gspot/
    MediaInfo
    http://mediainfo.sourceforge.net/en
    Also, you neglected to mention your version of Premiere.

  • How do I trim a clip not affecting the audio?

    Does anyone have an idea?

    So ... is what you're asking how to leave the audio untouched and remove part of a clip, tightening up the follow-on clip?
    If so ... simply "lock" the video track with the little lock icon on the left end of each track and do what you want to the video tracks.
    Neil

  • AVI file import only the audio track

    Hi
    When I want to import AVI file from a camcorder, I only get the audio file and not the video. I can view those avi file with VCL which mean (?) I have the necessary codec on the machine. So, know someone what do I do wrong?
    Claude

    Claude,
    I can view those avi file with VCL which mean (?) I have the necessary codec on the machine.
    While VLC Player is very good, there is one aspect of it, that can give one a false "sense of security" - VLC Player contains many CODEC's, that are not installed on the system. The same is true for MediaPlayer Classic HC - it also contains many CODEC's, that are not installed on the system.
    Usually, an AVCHD (H.264 CODEC) file will have an MTS, or perhaps MP4 format. Wrapping such a file in AVI is not standard.
    If you look at the file in MediaInfo (Tree View), the exact CODEC should be determined, and listed.
    If it IS H.264, then my next question would be whether you have the latest version of Apple's QT Player installed, as that should also install the Apple version of H.264.
    If you have an MJPEG CODEC file, wrapped in the AVI wrapper (much more common), then you will likely need to install an MJPEG CODEC. Here, it can get a bit tricky. Two suppliers of "generic" MJPEG CODEC's, MainConcept and Morgan, will usually work just fine. However, more and more camera mfgrs. are heavily tweaking the MJPEG CODEC, to suit their purposes. In those cases, the MainConcept, or Morgan, might not work 100%. In those cases, I recommend that one install the exact MJPEG CODEC, that came with the camera, whether Nikon, Canon, Panasonic, Olympus, or other. The exact MJPEG version will most likely be on the utility disc, that came with the camera, but it might install as a separate entity (not as common, as it should be), it might be installed with the camera's driver (a bit more common, but no where near universal), or it might be installed along with either an editing, or cataloging program, on that disc (most common, and not that intuitive). For instance, I have 5 MJPEG CODEC's on my laptop - one from Morgan, MainConcept, Canon, Nikon and Panasonic, as I have cameras from those companies.
    Again, MediaInfo will tell you what the CODEC is, inside the AVI wrapper.
    Good luck,
    Hunt

  • Can I import just the audio from a DVD into itunes????

    I'm a beginner to this Itunes and have been wondering this. If I can take audio files off of CDs and put them into Itunes. Can I take just audio from a DVD and put that into Itunes. Example: Can I take the audio from a live concert DVD for just one song?

    Welcome, Don, to the Apple Discussions!
    No, you can't do that with iTunes.
    There is third-party software available that allows you to do so, though.
    You might want to pay a visit to Google and enter
    b dvd audio ripping
    or some such terms.
    Good Luck!

  • Just recently, when I put clips into iMovie, the audio and video are not in sync. How can I fix this problem?

    Whenever I try to make a video on iMovie, the audio is not in sync with the video. This just happened recently. I have no clue what is causing the problem, or how to fix it. What should I do?

    Hi samueldoherty,
    If you are having audio issues during video playback in iTunes, you may find the following articles helpful:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Regards,
    - Brenden

Maybe you are looking for

  • G/L account determination for movement type 702, 309

    All SAP Gurus, In our plant, for movement type 702 (inventory count), 309 (material to material transfer), some /L account assignment is wrong. I suppose these settings are in Keys GBB, AUM and PRD. Will cahnging the G/L accounts n these keys will gi

  • Is it possible to bring back books in iTunes?

    Is it possible to use books in itunes instead of ibooks?

  • How do i unsync my ipod?

    I synced my ipod into one computer on my apple ID, then synced it onto my computer still on my ID. Now on my computer i cant download music until i unsync my ipod from the other computer but i dont know how so i cant download music. It keeps on commi

  • How to stop the running VSTO application

    Hi, I want to stop my Word/Excel 2010 C# VSTO application.  Is there any way to stop it by clicking on a button on the same application, command line option or keyboard shortcut. Thanks in advance.

  • Older versions of FCP (HD 4.5) compatible with the new 5.1 ?-- HELP

    Hello, I am a beginning video production student just starting out with FCP. I have been editing a commercial on my schools 5.1 version, but have FCP HD 4.5 on my PowerBook G4. I need to know how to handle working with the two versions so that they c