Clips from Project bin to source monitor causing video output to go out of sync(CS6 and CC)

Any footage I double-click or drag from the Project window to the Source monitor causes my video output to go out of sync. When I put the clips in the timeline, video goes back in sync and I'm able to view video output.  My monitors are connected to a Blackmagic Intensity Shuttle Thunderbolt(9.7.5) via component and HDMI. Is this normal behavior in Premiere or is there a setting to enable this? No issues doing this in FCP7(clips from Project window to Canvas).
Can someone with an I/O from AJA, Matrox, or Blackmagic please test this out for me. Thanks...
2012 Macbook Pro
MacOS 10.8.3

Hi Joe,
How do you have your audio setup? Try the following.
- Set your OS system sound to Built-in or Line out audio
- Select Blackmagic for both Video and Audio in Preferences> Playback
- Select System Default Input/Output from Preferences> Audio Hardware
Hope this helps,
Peter Garaway
Adobe
Premiere Pro

Similar Messages

  • I took out a clip from project window.

    I took out a clip from project window. I went back to the event window and when I played back it was like it skipped a frame.  the audio was fine but the vid was skipping every other frame.  any suggestions?
    imovie 11  OSX 10.8.1 imac 16 gigs ram

    Buying AppleCare, at this point, would be a waste of money. You voided your warranty when you replaced your optical drive with a hard drive. Only RAM and hard drive bay customer alterations will not affect your warrany.
    You could have, I suppose, kept the optical drive and if your computer ever needed Apple repair, have replaced the hard drive for the optical again before taking it in for service. A little bit underhanded, but some people have done it.
    You're pretty much just out of luck now...
    Sorry,
    Clinton

  • Suddenly my event library in iMovie 11 is empty.  I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion. Help??

    Suddenly my event library in iMovie 11 is empty.  I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion.
    I was working on a project, when all of a sudden the event library went blank.  There are no devices showing in the left column, only "last import" and "aperture videos".  There are no video clips in the editing window.  I have "Show: All Clips" selected.  I've tried "group events by disk". 
    When I have a Project open, it plays just fine.  There are no yellow triangles saying "source clip is missing".  Yet, again...nothing is in the event library large editing window.  So, it seems the data is still there, but invisible.  This is true with all the projects, and all the external devices I've experimented by plugging in to see if their video clips show up in the event library. 
    I have tried to import new movies, and iMovie responds as normal...looking like it's importing, then "generating thumbnails", then it makes the "ding" signalling that the import is complete...but nothing shows in the event library.  I've tried importing movies from the harddrive, from quicktime, and from an external drive.
    I have searched the forums, and found many users with a similar, but not the same, problem.  For them, it seems the "go to users-library-preferences and delete iMovie plist" has solved their problem.  This didn't work for me. 
    I uninstalled/reinstalled iMovie, I even have re-installed Mountain Lion (from a last-ditch effort suggestion from Apple technician). 
    HERE'S AN INTERESTING DETAIL:  After almost 5 hours on the phone with Apple, I decided to cut my losses and take my project to another Mac I have.  I'm working on a project, for work, that is critical that it's completed by tonight (whoops), and all my video is on an external drive.  So, I plug in the external drive to Mac #2, open iMovie, and everything is looking fine.  I continue importing some files I was converting, through Wondershare, and suddenly (whether or not this has to do with the importing, I'm not sure), the SAME THING happened to Mac #2!!!!  I can't believe this. 
    Does anyone have any suggestions?  Have you ever heard of this happening?  Could it have to do with the files I'm importing??? 
    I apologize if my language is confusing.  Obviously, I'm not an Apple genius-person!  I hope I've provided all the information you need.
    Mac #1 is a 27" desktop, mid-2012, software up-to-date.  Mac #2 is a 24" desktop, about 4 years old, OSX 10.7.5

    I'm adding more information:
    in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
    This happened all of a sudden, while I was working on iMovie project (on both computers).
    All my Projects are intact, and play when I open them. 

  • My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

    My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

    What kind of Mac to you have?  This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire.  If your mac *does* have firewire, get a camcorder firewire cable and try again.
    ETA:  Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go.  You will probably need a cord that goes from FW800 to your camcorder.

  • Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

    Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

    Try this:
    Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
    If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse.  ONce the computer starts up again, wait for the pop-up looking for a mouse.  Turn on the power to the bluetooth mouse.  It should work normally now.

  • Multiple instances of the same source clip in Project bin

    This is a strange one.
    I think its more an issue now than ever due to tapeless format editing. I edit lots of video now shot on Canon 5d. They sometimes have thousands of individual clips.
    The problem is that our project files are getting huge and premiere slows to a grinding halt.
    We copy paste lots of timelines from one project to another. When we paste, all of the source clips land in the project bin (as you would expect) However, sometimes I have already made reference to the same source files in the edit to begin with (So they are already in the project bin)
    However, when I paste a new timeline, it will make another reference to that same source clip in the project bin. Therefore double up reference to a souce clip in the project. Increasing the clips in the overall project, which bloats everything and slows premiere down.
    Can premiere be smarter? Can it see that the source file already exists in the project and link to that existing file instead of creating another reference to the same file?
    Hope that makes sence.

    I am beginning to think that there is no easy way around this issue.
    I have started to use Final Cut and am noticing lots of differences between the two platforms. I have been a Adobe Premiere user for 10 years and I concider myself a NINJA using this program. However, there are definitly differences between the two, this being one of them.
    Final cut does not double up on source references in your project bin when copying one sequence from one project into another.
    CLEVER
    Its annoying that premiere doubles files up as it gets ridiculously messy in your project bin. Double ups, triple ups, quadruple ups the list goes on.
    Its strange cause when you start a Prem project from scratch and import a source clip, you can set in and out points as many times as possible and drag onto the timeline, and it does not duplicate the original source file in the project bin. Thus keeping your project bin neat and clean. However, as soon as you paste a sequence, it goes and duplicates refeneces like its outta control, rather than looking at what you alraedy have in your project bin and saying to itself. (Hmmm well the source clip is already here, so we dont have to duplicate this one....move onto the next file)
    Prem is great at lots of things, dont get me wrong. I freaking love the program, however, things like this let it down as the program becomes unusable as it gets bogged down with way too many clip references.
    Hmmm, we shall see who wins the day in the end. Time do do some Final Cut edditing now.
    P.S. Final cut can do 16 multi clips in a real time edit. Premiere...only 4...come on Prem, pick up your game!

  • Audio "sub-clips" won't play in source monitor, but will play when cut into a sequence.

    I'm cutting an "audio only" project in Premiere and I came across a strange problem while making sub-clips. The first 6 sub clips made from the same master audio clip were normal, but then something changed, and the rest of them won't play any sound while in the "Source" window, even though while in the window the sub-clip displays a waveform.
    Once edited into a sequence they play normally, but not being able to listen to the sub clips in the source monitor is annoying, and louses up my whole editing routine for this kind of project.
    Any ideas as to why this is happening, or what I might do to fix it?

    Number of issues here:
    1. Your system does not meet minimum requirements.
    2. Your CPU, disks, memory are not enough for anything other than DV.
    3. What video camera was used with what codec on what OS with which version of PR. etc.
    Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

  • CS4 Premiere Pro Clips Won't Play in Source Monitor/Program Monitor

    I can't get clips to play in source monitor/program monitor/preview pane in Pr Pro.  I have spent hours looking through the forums to try and find a fix and I have troubleshot the following.....
    1. Codecs are not broken... or seem to be working according to Sherlock
    2. Video and audio drivers up to date
    3. Unistalled and re-install Pr Pro then updated via updater
    Here is the funny thing...
    In Encore, OnLocation, and other Suite program the play functionality works just fine....the only one it doesn't is Pr Pro.
    Question:
    Is the source code to playback video in Pr different then the other suite programs or am I just making a trivial mistake in Pr?
    Sorry for the novice question but I am about to give up and have no where to turn.
    Hardware Specs
    CPU 3.6 GHz
    HD 1TB 7200 RPM
    RAM 2 MB (is this my issue?)
    Video: Open GL

    Number of issues here:
    1. Your system does not meet minimum requirements.
    2. Your CPU, disks, memory are not enough for anything other than DV.
    3. What video camera was used with what codec on what OS with which version of PR. etc.
    Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

  • Adobe Premiere - from project bin to timeline

    I've just installed trial verison of AP and have populated  a new project bin with jpg images and mp4 video clips.
    For some reason I can't drag anything into the timeline window.
    Am sure it's a simple fix but....

    Hi Roberto
    Marked as helpful
    I just installed Premiere today so I don't yet have any samples.
    I want to add Premiere ability after several years with Avid Studio as it's commonly sought for contracts.
    I plan to re-create a couple of recent projects in Premiere to learn the interface and functionaity.
    I'm increasingly starting to sell the idea of interactive video and haev done some recent screen capture demos and talkthroughs of a couple of samples.
    I want to recreate the same kind of interfaces in Premiere using the same multimedia elements.
    Here's a couple of samples on Vimeo:
    http://vimeo.com/72317003
    http://vimeo.com/68424241
    Mark

  • I DRAG AND DROP A VIDEO CLIP FROM THE EVENT BROWSER THAT IS 7.9 SECONDS INTO MY IMOVIE I'VE STARTED AND IT CHANGES IN THE PROJECT TO 4.9 SECONDS - HOW CAN I KEEP THE LENGTH THE SAME

    I drag a video clip from Event to Project into my imovie I've started.  The video clip length changes from 7.9 seconds to 4.9 seconds. How can I stop that length from being changed?

    If you are using transitions either side of the clip they will use some of the clip to generate the effect, there isn't anything you can do unless you remove or shorten the transition.
    If you aren't using transitions it may be that you are only selecting part of the clip in the event window, try dragging out the yellow frame to include all the video you want in the project.

  • PIP / Green screen only using clips from project libary

    Hello,
    I've been experimenting with iMovie and looking to combine some clips and do some PIP, Greenscreen, etc. The only way I combine 2 clips to to drag it down from the event library. Is there no way to combine 2 clips from the project library?
      I ask this because all the clips on the project library are edited, cut and ready to go. The event library footage is hours long and raw, seems like a obvious thing to be able to combine 2 project libary clips but I cannot seem to do it.
    Failing that, I though maybe add the Project library clip to the event library and do it that way but that also does not seem to work
    Hopefully I've explained myself ok, if you need any more info or explanation just ask.

    Yes, you need to drag clips from the Event Library to the project.
    If you need to use some edited project clips in a project, you should use the SHARE menu to Export Using QuickTime. Choose Apple Intermediate Codec as the video codec, and save it to a place where you can find it. Then you can import it to an iMovie Event using FILE/IMPORT MOVIES...

  • I edited audio from a clip in logic. when putting both back together in FCE it is out of sync.

    Hi there,
    i am more of a logic user than a FCE user. so i had a clip recorded at a friends in 720p (1280x720).
    the audio codec used was 24-bit integer (little indian), stereo at 44,1k
    the video one was: apple openDML JPEG, 1280x720
    since i am used to the logic audio environment i decided to edit the audio in logic.
    but now when putting it into FCE the clip is shorter than the video clip and starts to run away from the video. after a while its totally desynced.
    i tried to edit the audio in logic in a 48k session and 44,1k,. bounced it 24bit and 16 bit and i feel i tried everything that come to my mind but nothing worked.
    so right now i am really needy for any kind of idea that might work.
    i hope i described the process of what i have been doing sufficiently and have given enough information (FCE 4.0, Logic Pro)
    excuse my poor english, i am not used to writing anymore.
    i hope someone takes the time and there is a possibility to fix this without editing the audio in FCE.
    cheers and thanks in advance

    well.... i had some problems when i exported the video and audio toghether. could not get the resolution right. so i changed the sequence settings to apple intermediate codec 720p30.
    thing is this seems to work with audio 48k but the source file just got 44,1k.
    before grasping the fit to fill feature, i got to check what that means.
    thanks a lot for your help already
    do i need to export the project in 48k audio maybe before i can use logic the edit the audio?

  • What settings need to be adjusted to send out Dolby digital ,DTS from inputs such as Netflix to the video output via an adaptor to HDMI?

    Hi. I can only stream picture and PCM out of my Mac BookPro. What settings need to be adjusted to output Dolby Digital or DTS to an HDMI adaptor had thence onto my AV Processor?

    The Audio Midi Setup utility may need to have its settings updated.
    That's if you have the right adapter:
    https://discussions.apple.com/docs/DOC-2821

  • Importing clips from iMovie project (they keep ending up in the trash)

    I have never tried to import other clips from another iMovie project before and I just tried it yesterday. This is what I did:
    -I went into the other project and clicked on each individual clip from that project that I wanted (one at a time).
    -I copied that clip and then saved it to the desktop
    -From there I copied those clips to my external drive (which holds the new project that I am working on
    -I then opened up the new project in iMovie
    -I went to File<Import
    -I selected the clips that I had copied over to the external drive
    -I imported them
    -They all showed up fine, they played fine and I was able to edit them and put them into the time line as well
    The problem I face though is after I save the project and exit, the next time I open the project, each of those clips are missing and have been placed in the trash
    What am I doing wrong?
    Thanks ahead of time for your help!

    It sounds like something may be preventing iMovie from properly saving the project on the external drive. The drive format may be wrong, or third-party software might be causing conflicts. More here:
    http://discussions.apple.com/message.jspa?messageID=1852869#1852869
    Another possibility is that you are opening the wrong project file saved inside the iMovie 5 project. If your project was originally an iMovie 4 project converted to iMovie 5 that's an easy mistake to make. More here:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=1971832
    Note that the copy/export/import routine you used can be simplified enormously. iMovie 5 lets us Copy and Paste clips much more simply. To copy clips from Project A to Project B, open Project A, select all the clips you want copied to Project B, choose Edit > Copy, open Project B, move the playhead where you want to place the clips, and Paste. iMovie will import all the files that support those clips from Project A to Project B. Note that it imports the entire file for the clip, not just the clip itself. That's so the clip inherits all the non-destructive editing features it had in Project A.
    To avoid Project B becoming unnecessarily large, it's important to Copy and Paste all the clips you want together. If you copy two clips at the same time that share the same file iMovie imports their source file just one time. But if you Copy and Paste two clips that share the same source file separately, iMovie imports the same file twice.
    Karl

  • Insert from source monitor to a different video track

    I working in a DVCPro project, and also have AVCHD. Is it possible to insert/overwrite the AVCHD from the source monitor onto Video 2 (or 3 or whatever?). I've tried targeting Video 2, but then it just inserts blankness.
    thanks
    kairosmatt

    Targeting tracks
    Be sure your Source Track is lined up
    with the Target Track in your Timeline.
    Click + Drag your source Track to move up or down.

Maybe you are looking for