Clone 10.2.0.4 failing
$ORACLE_HOME/oui/bin/runInstaller -clone -silent -ignorePreReq ORACLE_HOME="/usr/orasys/10.2.0.4" ORACLE_HOME_NAME="ora_10204r4"
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /usr/orasys/10.2.0.4/tmp/OraInstall2009-05-09_10-52-37PM. Please wait ... Oracle Universal Installer, Version 10.2.0.4.0 Production
Copyright (C) 1999, 2008, Oracle. All rights reserved.
SEVERE:OUI-10180:Either a component of the path prefix or the file referred to by path does not exist or is a null pathname.
please advice
did you ever find the answer. i have exactly the same issue?
running command
/optware/oracle/product/10.2.0/db/oui/bin/runInstaller -clone -silent -ignorePreReq ORACLE_HOME=/optware/oracle/product/10.2.0/db ORACLE_HOME_NAME=HOME1
error
SEVERE:OUI-10180:Either a component of the path prefix or the file referred to by path does not exist or is a null pathname.
Similar Messages
-
using CS5 12.0.4 x32, the clone stamp function has slowly failed. At first only the central third of the pixels were replace. now maybe 5% of the pixels are replaced. Painting with a grey bursh barely lays down any pixels. I thought a reinstall of app might help. Do I delete CS5 or install over the present installation?
Please post in the Photoshop forum. This forum is for suite specific issues only.
Bob -
ADX Database Utility failing on FS2 patch system
Hello
My fs_clone failed on FS2 system. on my init.ora has an entry, I am getting Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection.
service_names = PRO0DV,ebs_patch,
local_listener=PRO0DV_LOCAL
How do recreate listener.ora file on fs2 system.
Thanks
PrinceHello Hussein.
This is the error I am getting on my fs_clone
Communication error with the OPMN server local port.
Check the OPMN log files
SEVERE : Apr 8, 2015 11:43:32 PM - ERROR - CLONE-20218 Cloning is not successful.
SEVERE : Apr 8, 2015 11:43:32 PM - CAUSE - CLONE-20218 An internal operation failed.
SEVERE : Apr 8, 2015 11:43:32 PM - ACTION - CLONE-20218 Provide the clone log and error file for investigation.
oracle.as.clone.cloner.exception.ApplyCloneException: Instance "Create & Start" step failed.
at oracle.as.clone.util.ASInstanceUtil.createStartInstance(ASInstanceUtil.java:203)
at oracle.as.clone.cloner.component.ComponentApplyCloner.createStartInstance(ComponentApplyCloner.java:253)
at oracle.as.clone.cloner.component.ComponentApplyCloner.doClone(ComponentApplyCloner.java:124)
at oracle.as.clone.cloner.Cloner.doFinalClone(Cloner.java:61)
at oracle.as.clone.request.ApplyCloneRequest.applyArchive(ApplyCloneRequest.java:188)
at oracle.as.clone.request.ApplyCloneRequest._clone(ApplyCloneRequest.java:69)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:131)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:114)
at oracle.as.clone.client.CloningClient.executeT2PCommand(CloningClient.java:238)
at oracle.as.clone.client.CloningClient.main(CloningClient.java:115)
Caused by: java.lang.Exception: Unable to start opmnserver of the instance /apps2/property/product/devr12/fs2/FMW_Home/webtier/instances/EBS_web_PRO0DV_OHS1
at oracle.as.clone.provisioning.implementations.ASInstanceProvImpl.startInstance(ASInstanceProvImpl.java:409)
at oracle.as.clone.provisioning.implementations.ASInstanceProvImpl.createInstanceAndStart(ASInstanceProvImpl.java:158)
at oracle.as.clone.util.ASInstanceUtil.createStartInstance(ASInstanceUtil.java:197)
... 9 more
SEVERE : Instance "Create & Start" step failed. -
Execution of "Copy Configuration" of SOA failed
Hi Everybody,
We are trying to extract moveplan.xml from a provisioned FMW setup but we are stuck with an error.
It would be of great help if any one can help on this.
Any help to resolve this would be highly appreciated.
Error:
*SEVERE : [PLUGIN]Jun 13, 2011 4:07:53 AM - CLONE-53004 Error in examining Human WorkFlow.*
*SEVERE : [PLUGIN]Jun 13, 2011 4:07:53 AM - CLONE-53004 Human WorkFlow examination failed.*
*SEVERE : [PLUGIN]Jun 13, 2011 4:07:53 AM - CLONE-53004 Make sure that all the specified values are correct and domain configuration is valid. Check managed server logs and clone logs for more details.*
*SEVERE : [PLUGIN]Jun 13, 2011 4:07:53 AM - CLONE-53013 SOA Plugin examination failed.*
*SEVERE : [PLUGIN]Jun 13, 2011 4:07:53 AM - CLONE-53013 Execution of "Copy Configuration" of SOA failed.*
*SEVERE : [PLUGIN]Jun 13, 2011 4:07:53 AM - CLONE-53013 Make sure that the SOA managed server is started and all the applications targeted to the SOA managed server are in active state.*
The idea is to run T2P(Test 2 Production) copyConfig.sh script for all doamins one by one and then collect all archives to one place and finally run extraxtMovePlan.sh specifying all achrives to get single multi archive Move Plan.
So, first we ran copyConfig.sh on CommonDomain, but came across the above error.
The command that we executed was :
copyConfig.sh -javaHome ./jdk6 -archiveLoc /scratch/ntallapa/t2p1.jar -sourceDomainLoc <Domain root>/CommonDomain -sourceMWHomeLoc <Fusion App Top>/fusionapps -domainHostName <hostname> -domainPortNum 7001 -domainAdminUserName FUSION_APPS_PROV_PATCH_APPID -domainAdminPassword /scratch/ntallapa/p.txt -logDirLoc /scratch/ntallapa/ -silent true
The SOA managed server is up and running.
Regards,
SaurabhSaurab,
Did you find a resolution to this as I am facing the same issue?
Thanks
Mark -
Missing entrys in SPRO after upgrade to FS-RI 6.60
Hi,
We've upgraded FS-RI 472 to 6.60 fp4. (R/3 470 to ERP 60 EHP 4)
Refering to the Release notes there should be some new entries under "Accounting", "Settings for Time Period".
There should be "Edit Financial Years", "Open and Close Accounting Periods". We only have "Edit Scope of Accounting Period".
Anyone have any idea? I guess I've missed some step in the upgrade.Randy,
Looks like you need to add more space to /tmp directory as I see the following entries in CLONE*.error file.
CLONE2013-12-28_12-41-01PM.error:
=================================
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20275 Insufficient space to create /tmp/CLONINGCLIENT8522798570339051663.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20275 Minimum required space was at least "1,798" MB, but only "1,737" MB was available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ACTION - CLONE-20275 Make sure that the minimum required space is available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20233 Restoring Middleware home for sourceid "mwhome1@FMW_Home" has failed.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20233 An internal operation failed.
Thanks,
Hussein -
Error while creating template from win 8.1 VM
hello Experts,
I have a SCVMM 2012 R2 with Hyper-V host on Windows server 2008 R2 sp1 .
Next I have create a Windows 8.1 VM on Hyper-v Host machine then created a clone of this VM. It created successfully, but when i i tried to create a template from any of these windows 8.1 VM and its Clone VM. it have got failed with error as below:
Error (2916)
VMM is unable to complete the request. The connection to the agent host1.aaa.com was lost.
WinRM: URL: [http://host.aaa.com:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsCompactServerUrlGroup], Filter: [select * from BitsCompactServerUrlGroup where UrlGroup="none"]
Unknown error (0x80338126)
Recommended Action
Ensure that the Windows Remote Management (WinRM) service and the VMM agent are installed and running and that a firewall is not blocking HTTP/HTTPS traffic. Ensure that VMM server is able to communicate with host.aaa.com over WinRM by successfully running
the following command:
winrm id –r:host.aaa.com
This problem can also be caused by a Windows Management Instrumentation (WMI) service crash. If the server is running Windows Server 2008 R2, ensure that KB 982293 (http://support.microsoft.com/kb/982293) is installed on it.
If the error persists, restart thost.aaa.com and then try the operation again. /nRefer to http://support.microsoft.com/kb/2742275 for more details.
I have removed the hyper-v then re-added host on scvmm ,Ensured that Windows Remote Management service is running.
I don't have idea exact reason for this....is there is compatibility issue win 8.1 ?Hello Srinivasa,
The WWI folder in program files of C drive has definitely been played with. Try installing SAP GUI again on your machine.
Also, please check for WWI installation as follows
1.If you have done local installation, please try installing again by following steps mentioned below:
Open any Word document .docx
click on "office button"
click on "word options"
click on "advanced"
click on "file locations"
select "user templates"
click on "modify"
look in " C> program files>SAP> front end> SAP Gui-->wwi". click on "Ok"
2.If you have MS word 2003, go to tools> options>advanced..Then follow the above steps.
Hope this solves your problem.
Regards
Pavan -
Issue with adop fs_clone after upgrade to R12.2.3 on VIS instance
I have installed EBS R12.2.0 Vision instance on Oracle Linux Server release 6.5 x86-64 with Unbreakable Enterprise Kernel release 3 (3.8.13-16.2.2.el6uek.x86_64) and then updated to R12.2.3. Everything went smooth with the initial install, the AD and TXK patches, and the adop patching cycle for 12.2.3 update. I'm having an issue with the running fs_clone which is the first post-update step from doc 1586214.1. The other adop phases ran OK see below. Also below is the error I'm getting and want to know if anyone has experienced this or any ideas? I've googled and searched MOS but can't find a direct hit. I'm new to adop and struggling to troubleshoot this....any help would be appreciated. I've run the fs_clone phase a couple times but got the same result.
adop -status -detail (this is the R12.2.3 update cycle). All steps seems OK here.
Current Patching Session ID: 4
Node Name Node Type Phase Status Started Finished Elapsed
hn-s-sb13 master PREPARE COMPLETED 27-DEC-13 09:27:31 -05:00 27-DEC-13 09:55:35 -05:00 0:28:04
APPLY COMPLETED 27-DEC-13 10:11:53 -05:00 27-DEC-13 09:35:53 -05:00 11:24:00
FINALIZE COMPLETED 28-DEC-13 09:28:46 -05:00 28-DEC-13 09:29:52 -05:00 0:01:06
CUTOVER COMPLETED 28-DEC-13 09:32:12 -05:00 28-DEC-13 10:05:35 -05:00 0:33:23
CLEANUP COMPLETED 28-DEC-13 10:25:22 -05:00 28-DEC-13 10:48:31 -05:00 0:23:09
File System Synchronization Used in this Patching Cycle: None
Generating full ADOP Status Report at location: /u01/oracle/VIS/fs_ne/EBSapps/log/status_20131229_120910/adzdshowstatus.out
Please wait...
Done...!
adop exiting with status = 0 (Success)
From txkADOPPreparePhaseSynchronize_Sat_Dec_28_12_40_05_2013.log:
==========================
Inside setCloneStatus()...
==========================
Generating SQL file: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13/TXK_SYNC_create_Sat_Dec_28_12_40_05_2013/5_DEREGISTER-ORACLE-HOMES.sql
SQL Command: UPDATE ad_adop_session_patches SET clone_status = 'DEREGISTER-ORACLE-HOMES' WHERE status = 'N' AND bug_number = 'CLONE' AND node_name = 'hn-s-sb13' AND adop_ses
sion_id = 5;
Execute SYSTEM command : sqlplus ********* @/u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13/TXK_SYNC_create_Sat_Dec_28_12_40_05_2013/5_DEREGI
STER-ORACLE-HOMES.sql
EXIT STATUS: 1
SQL execution went through successfully.
LOG FILE: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13/TXK_SYNC_create_Sat_Dec_28_12_40_05_2013/5_DEREGISTER-ORACLE-HOMES.out.
*******FATAL ERROR*******
PROGRAM : (/u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl)
TIME : Sat Dec 28 12:42:54 2013
FUNCTION: main::runFSCloneApply [ Level 1 ]
ERRORMSG: /u01/oracle/VIS/fs2/EBSapps/comn/clone/bin/adclone.pl did not go through successfully.
From adop_20131228_123623.log:
ADOP Session ID: 5
Phase: fs_clone
[START 2013/12/28 12:39:57] fs_clone phase
[EVENT] [START 2013/12/28 12:40:01] Performing CLONE Steps
[EVENT] [START 2013/12/28 12:40:02] CLONE Patch File System from Run File System
[EVENT] Calling: /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl
[STATEMENT] Output directory: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13
[UNEXPECTED]Error occurred while executing <perl /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl -contextfile=/u01/oracl
e/VIS/fs2/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml -patchcontextfile=/u01/oracle/VIS/fs1/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml -promptmsg=hide -co
nsole=off -mode=create -sessionid=5 -timestamp=20131228_123623 -outdir=/u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13>
[UNEXPECTED]Error occurred while CLONE Patch File System from Run File System using command: <perl /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOP
PreparePhaseSynchronize.pl -contextfile=/u01/oracle/VIS/fs2/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml -patchcontextfile=/u01/oracle/VIS/fs1/inst/apps/VIS_hn-s-sb1
3/appl/admin/VIS_hn-s-sb13.xml -promptmsg=hide -console=off -mode=create -sessionid=5 -timestamp=20131228_123623 -outdir=/u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20
131228_123623/VIS_hn-s-sb13>.
[PROCEDURE] [START 2013/12/28 12:42:55] Check and Stop Patch Admin Server
[STATEMENT] select count(1) from ad_adop_session_patches
where applied_file_system_base='/u01/oracle/VIS/fs2' and
patch_file_system_base='/u01/oracle/VIS/fs1' and
bug_number IN ('CLONE','CONFIG_CLONE') and
status IN ('N','F')
[STATEMENT] There is a pending clone session for /u01/oracle/VIS/fs1.
[STATEMENT] Skipping Check and Stop Patch Admin Server Step.
[PROCEDURE] [END 2013/12/28 12:43:01] Check and Stop Patch Admin Server
[UNEXPECTED]fs_clone phase completed with errors/warnings. Please check logfiles
[PROCEDURE] [START 2013/12/28 12:43:03] Unlocking sessions table
[STATEMENT] SQL stmt: < begin
AD_ZD_ADOP.UNLOCK_SESSIONS_TABLE('hn-s-sb13',60,2);
end;
>
[PROCEDURE] [END 2013/12/28 12:43:07] Unlocking sessions table
Log file: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/adop_20131228_123623.logRandy,
Looks like you need to add more space to /tmp directory as I see the following entries in CLONE*.error file.
CLONE2013-12-28_12-41-01PM.error:
=================================
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20275 Insufficient space to create /tmp/CLONINGCLIENT8522798570339051663.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20275 Minimum required space was at least "1,798" MB, but only "1,737" MB was available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ACTION - CLONE-20275 Make sure that the minimum required space is available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20233 Restoring Middleware home for sourceid "mwhome1@FMW_Home" has failed.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20233 An internal operation failed.
Thanks,
Hussein -
Do not read this tip, unless you want to be left with no excuse for an unsuccessful update or upgrade.
Because you won't install anything until you KNOW if it will eat your Mac, your cat, or a school bus
You have Time Machine and Time Machine is good, but it's not the same as a bootable clone. Each have their own strengths and purposes.
The clone is a file for file copy of your entire hard drive. With a clone, if your hard drive fails you can just boot from it and keep on right on working, until you have the time to repair or replace the main drive.
There are many cloning apps to choose from, you can do it through Mac OS X in Disk Utility as described in Disk Utility Help, However Disk Utility won't update the clone.
There are other cloning utilities you can use, but both SuperDuper or CarbonCopy Cloner seem to be the most reliable and simplest to use, as reported by users here. You can also use them for incremental backups. CCC is free for backup, while SD is shareware for the backup feature. Also be sure to run Disk Utility/Disk repair before cloning and that there are no issues you know of.
Why it's guaranteed not to eat your Mac....
Because the next time you install, you will startup from your clone, by selecting it in System Preferences > Startup Disk. (At the same time in System Preferences choose Time Machine and turn it off, remembering to turn it back on when you return to your main disk.)
Now, install your test software and try it out. (Remember to Repair permissions after all installs.)
After that, you can be very sure if it works, or if there are issues. If it runs well, boot back to your main disk and install the software.
-mjI see that as related but not the same.
Not so much the other side of the coin but certainly from the same set of coins.
7:24 PM Sunday; November 28, 2010 -
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
Hi Experts,
I am performing Cloning for Oracle Application R12 with rapid clone and adcfgclone dbTier is failing with the below error.
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
Both my source and target system are on the same server. I am using dbTier option because I have cold backup available from the source system.
DB Version: 11.2.0.3
EBS version: 12.1.3
OS Version: RHEL6, 64 bit
cat /data/db_top/db/tech_st/11.2.0/appsutil/log/TEST_oracleupk/ApplyDBTier_07050816.log
Log file contents:-
AutoConfig could not successfully execute the following scripts:
Directory: /data/db_top/db/tech_st/11.2.0/perl/bin/perl -I /data/db_top/db/tech_st/11.2.0/perl/lib/5.8.3 -I /data/db_top/db/tech_st/11.2.0/perl/lib/site_perl/5.8.3 -I /data/db_top/db/tech_st/11.2.0/appsutil/perl /data/db_top/db/tech_st/11.2.0/appsutil/clone
ouicli.pl INSTE8_APPLY 255
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
/data/db_top/db/tech_st/11.2.0/appsutil/driver/regclone.drv
cat $[target_oracle_home]/ appsutil/ log/$CONTEXT_NAME/make_[timeStamp].log
Error found while relinking
return code = .58
I have already checked these MOS Notes
OUICLI.PL Fails While Running Adcfgclone On Oracle EBS R12 If Global Inventory Does Not Exist [ID 458653.1]
RC-00110 Error While Running adlnkoh.sh [ID 330469.1]
But none has worked in my case. Please let me know what I'm missing here.
Thanks,
AnkurHi Hussein,
Following the workaround provided in this MOS Note ID has solved my issue.
Rapid Clone On Dbtier Fails "RC-50013: Fatal: Instantiate Driver Did Not Complete Successfully" [ID 1352116.1]
But now "adcfgclone.pl appsTier" is failing with the below error.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /data/appl_top/inst/apps/TEST_oracleupk/admin/install
adgendbc.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
txkWfClone.sh INSTALL_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /data/appl_top/apps/apps_st/appl/au/12.0.0/perl -I /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/scripts/adexecsql.pl sqlfile=/data/appl_top/inst/apps/TEST_oracleupk/admin/install
afwebprf.sql INSTE8_PRF 1
amscmprf.sql INSTE8_PRF 1
amswebprf.sql INSTE8_PRF 1
bisadmprf.sql INSTE8_PRF 1
bisdblrp.sql INSTE8_PRF 1
clnadmprf.sql INSTE8_PRF 1
cncmprf.sql INSTE8_PRF 1
cseadmprf.sql INSTE8_PRF 1
csfadmprf.sql INSTE8_PRF 1
csiadmprf.sql
INSTE8_PRF
1
eamadmprf.sql
INSTE8_PRF
1
fteadmprf.sql
INSTE8_PRF
1
icxwebprf.sql
INSTE8_PRF
1
oksfrmprf.sql
INSTE8_PRF
1
wshadmprf.sql
INSTE8_PRF
1
Directory: /data/appl_top/inst/apps/TEST_oracleupk/admin/install
adadmprf.sh
INSTE8_PRF
1
admk80ln.sh
INSTALL_PRF
1
afadmprf.sh
INSTE8_PRF
1
afcpctx.sh
INSTE8_PRF
1
afcpgsm.sh
INSTE8_PRF
1
ibywebprf.sh
INSTE8_PRF
1
igccmprf.sh
INSTE8_PRF
1
jtfictx.sh
INSTE8_PRF
1
okladmprf.sh
INSTE8_PRF
1
txkJavaMailerCfg.sh
INSTE8_PRF
1
txkWebServicescfg.sh
INSTE8_PRF
1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /data/appl_top/apps/apps_st/appl/au/12.0.0/perl -I /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/install
adadmat.pl
INSTE8_APPLY
1
AutoConfig is exiting with status 31
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyApplTop
ERROR: AutoConfig completed with errors. Check logfile at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_07080320.log for details.
ApplyApplTop Completed Successfully.
# Checking the status of AutoConfig run of ApplyApplTop
Warning : AutoConfig has completed with errors .
Thanks,
Ankur -
I have used SuperDuper to make bootable back ups in the past, but if Time Machine backs up files on the fly it seems unnecessary to make a full back up from time to time. The bootable backup is easier to restore, but takes up another disk. The chances of both the computer's and the Time Machine disks failing simultaneously are, one hopes, fairly remote.
Any advice or comments appreciated.Yes you can always boot in recovery mode and restore from the TM backup. If your data is important to you then you should have a secondary backup on another drive for safety. Drives are cheap and you just never know what's could happen. Lightning strikes in a home can fry more than one piece of equipment at one time. If you can't afford a large enough drive for a secondary backup, then a smaller drive could be used to backup just your data files using SuperDuper.
I only have one backup drive myself. But my backup drive is partitioned with TM on one and a SuperDuper clone on the other partition. Even a TM backup can become corrupt or fail. I also just like to have a bootable SD clone in case my internal fails. I can boot from the external SUperDuper clone partition and continue on until my internal could be replaced. -
RMI activation problem under LINUX
When I try to run the activation example from the RMI tutorial, I get the following exception:
Exception in thread "main" java.rmi.activation.ActivationException: ActivationSystem not running; nested exception is:
java.rmi.NotBoundException: java.rmi.activation.ActivationSystem
at java.rmi.activation.ActivationGroup.getSystem(ActivationGroup.java:453)
at examples.activation.Setup.main(Setup.java:68)
Caused by: java.rmi.NotBoundException: java.rmi.activation.ActivationSystem
at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106)
at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:342)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:207)
at sun.rmi.transport.Transport$1.run(Transport.java:148)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
at java.lang.Thread.run(Thread.java:536)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:350)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at java.rmi.Naming.lookup(Naming.java:84)
at java.rmi.activation.ActivationGroup.getSystem(ActivationGroup.java:449)
... 1 more
This is with J2SE 1.4.1 on RedHat 7.3 running a vanilla 2.4.18 kernel. I'm running everything out of shell scripts to keep from getting bitten by typos.
Here's the punchline: The identical code works just fine on RedHat 6.2 (kernel 2.2.14 or so) - same 1.4.1.
Netstat tells me there is something listening on the appropriate ports, and output from strace suggests that there is some traffic back and forth to the server. There is no firewall running - I unloaded ipchains in the interest of paranoia. (There is firewalling running on the working system, go figure...)
Help? I can post more details if that would help resolve the problem.I wrote
When I try to run the activation example from the RMI
tutorial, I get the following exception:<snip>
The key was this:
The identical code works just
fine on RedHat 6.2 (kernel 2.2.14 or so) - same 1.4.1."Identical" really was - I'd used a tar archive to make a complete copy of the code running on the RH 6.2 system. The copy included the file log/Logfile.1, written by rmid (or rmiregistry). This contains lots of IP addresses; I suspect it's more than a log. Since the original machine and the clone are separated by a firewall, attempts by the clone to contact the original failed.
Deleting the "log" directory made the problem go away. -
How do I upgrade to mac OS X version 10.7?
I have Macbook Pro OS X version 10.6.8. How do I upgrade to 10.7 so I can use the Quick Books for Mac software I just bought?
Welcome to the Apple Support Communities
First, check if your Mac is compatible with OS X Mountain Lion > http://www.apple.com/osx/specs
If it's compatible with OS X Mountain Lion, open App Store and purchase OS X Mountain Lion. While Mountain Lion is downloading, make a backup of your data with Time Machine and/or Carbon Copy Cloner so, if the upgrade fails, you won't lose any file. When the download finishes, the Mountain Lion installer will show up, so follow the steps to upgrade to Mountain Lion.
Also, check if your apps are supported > http://www.roaringapps.com -
Installing 9.2 with 10.4.6 already installed
Hey guys,
I just purchased a new processor from WOC http://eshop.macsales.com/item/Other%20World%20Computing/MEG42M1500/
and because of its requirements I need to install OS 9.2 on the same disk that already has 10.4.6. Presently I don't have OS 9 installed at all and I dont have the 10.4 disk with me anymore. I do have an original OS 9.1 install disk and my original Power Mac G4 OS 9 Install disk (grey) as well if that'll work plus the 10.2 - 10.3 install disks.
After reading this page
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh763.html
I tried to install OS 9.2.1 but my only option during the install setup was to do it on my secondary storage drive, not the main drive where I need it. Is it a problem that I have File Vault active on my main drive?
Anyone know what I'm doing wrong here and should I be concerned that once installing OS 9 on my main drive it will screw up/erase any part of 10.4.6?
These are the questions I ask and await your godly response.
thanks/e
Power Mac G4 400MHZ - soon to be 1.5 GHZ Mac OS X (10.4.6)I don't know about "godly" response. "It's against my programming to impersonate a deity." (thus spoke C3PO in "Return of the Jedi").
Anyway, if you need to boot into Mac OS 9 on the hard drive, which is frequently the case for firmware updates which need to be applied in Mac OS 9, you need to install the Mac OS 9 drivers. I would repurchase the retail 10.4, as that's necessary for troubleshooting 10.4 issues. Assuming the last time you installed Mac OS X, you erase and installed, your problem is going to be the fact that automatically the drivers for Mac OS 9 are not installed. I would clone your system to an external hard drive as my backup FAQ says:
http://www.macmaps.com/backup.html
And if necessary erase, apply the Mac OS 9 driver installation, and restore the system you cloned. Be sure to have at least two clones, in case the first fails.
Here is the article on how to install the Mac OS 9 drivers:
http://docs.info.apple.com/article.html?artnum=75275 -
Back-up advice/assistance needed
hi, i have a titanium G4 with all indications of hard drive going bad and want to replace the HD. Meantime, tho i've read about Carbon Copy Cloner i'm still not clear just what the step-by-step should be as far as backing up everything before swapping out old HD for a new one.
As it stands, the Ti-Book is so slow that i hesitate trying to boot from it as the 'master' machine. What's the best way to replace the drive and restore the contents from the HD going bad....I believe what i need to create is a bootable Clone of its HD onto a firewire drive. Meantime, the only way to conveniently access the TI-Book is via Target Mode from a
healthy system. The Ti-Book is just running WAY too slow to boot into it - and the drive is making noise.
Anybody have a suggestion on the best approach to take with this. I'm thinking that if i could do the backup and restore using Target Disk mode from a desktop as the "master" machine that would be the easiest for me to understand but
need instruction on what the procedure would be for if i can do it that way...
Thanks much for any thoughts on this one.
MikeAnd once you get the two Macs connected in TDM, I strongly suggest that you forget about cloning the old hard drive. For one reason, if it's already malfunctioning, you may not have enough time to clone it completely before it fails altogether. For another, its directory may have been corrupted already, and if that's the case, a clone of it may be nonfunctional even if it is completed successfully (or appears to be).
Instead of cloning, focus on drag-copying the most important data files from the problem hard drive (the Target) to the desktop Mac's (the Host's) hard drive. Never mind the OS, any applications that can easily be reinstalled from their original source CDs, and data that is already backed up. Concentrate on backing up your highest-priority data files first. Most of those will be in your Home folder inside the Users folder, by default. -
Journaling could not be enabled
I always format my drive using OS Extended (Journaled) I had always assumed the HD in my MacBook Pro was formatted this way. I recently cloned my HD to an external drive and in the process discovered the HD was not Journaled. Upon researching the issue I discovered I could enable journaling through Disk Utility.
I selected the external clone and enable journaling highlighted. I selected it and journaling was enabled on the external. I tried the same procedure on the internal HD and I get the dialog Journaling could not be enabled on this HD.
How can I resolve this? Disk Warrior says all is fineHere is a summary of my solution: Remember, after I cloned my HD to the external, I discovered my internal drive had not been journaled for some unexplained reason.
The clone was not journaled as well. I assumed the file system was just copied from the internal HD to the clone. I successfully enabled journaling on the clone using Disk Utility, but failed enabling journaling on internal HD. Booting from the clone did not help. Permissions repair, and DiskWarrior did not help. Journaling could not be enabled. Then I thought I would just do a Smart Update using SuperDuper from the clone to the internal HD, thinking the file system, journaled, would copy to the internal HD. Superduper Crashed each time I tried to Smart Update the internal HD. Detailed reports were offered to be forwarded to Apple in a dialog box. Anyway, solution was to make a second clone, just in case, and then erased the internal HD and formatted extended journaled. I then used the original clone to restore the internal HD. Both volumes are now journaled and up to date. Phew!
Maybe you are looking for
-
Error 2 when installing Fireworks CS4 Trial?
Hey, I keep getting the Error: Error 2 when ever I try to install Fireworks CS4 Trial, downloaded from Adobe. Installing: Adobe Fireworks CS4 Adobe Exstention Manager CS4 After its pretty much done, it say's finished but with Error's, hit view info,
-
[S10e-4187] Inconsistent webcam internal port connectivity
The problem is that the webcam reconnects all the time to the USB port, so the computer says that there is new hardware from time to time. Sometimes the webcam works after this and sometimes not - it also says that if I connect to an USB2 port it wil
-
PO condition without access sequence maintain
Dear All, Recently found one of the company PO condition Y02X in OMJJ that the Access sequence is blank. and in the pricing procedure which i can see there is a calculation type/method assign to it. Can anyone please advice me what is the purpose of
-
Color Label Buttons - Unexpected Behavior
I have had two issues with the color label buttons on the toolbar in LR3: - When a custom filter is being used and then one of the color buttons is pressed to change the color, the resulting color is not the selected color. For example, if the "gree
-
Is Adobe Air needed for Photoshop elements 12?
I need some space for my computer and was just wondering if I needed adobe air in order to run Photoshop smoothly.An answer would really help.