Cloning Hdd to SSD boot drive and what happens with Music/Logic Plugins

Hi, my computer is a mid-2012 Mac Pro 12 Core
It's a great computer but I'm considering upgrading my main boot drive (WD Caviar Black 1TB HDD) to a 1tB Samsung EVO 840 SSD drive (I'm using a sonnet tempo PCI card to mount an SSD that holds audio at the moment and will add another SSD for the boot drive I'm referring to) so I just had a question - if I clone the HDD to the new SSD, what happens with things like licenses for my audio plugins, such as Native Instruments Komplete, programs by IKMultemedia. programs that use an ILOK such as Steven Slate Plugins and also, WAVES plugins? Will this info all carry across to the new SSD drive or do you think I'll need to reauthorise some things? I have all the serials etc so this shouldn't be an issue, but just wondered.
Any help would be appreciated as it feels like quite a big step in that it's my main system drive!
Thanks in advance
Sam

CCC is excellent. If it doesn't work then sure, just always have a safety net of your system that is untouched.
Also, after a clean install, CLONE it!
And then use Setup Assistant. Migration Assistant.
Clone of the system can go on sparse disk images too so you don't have to partition (should have at least one though) and you can have clone from different stages and versions: 10.9.4, without Setup Assistant, migrated, full loaded with all your apps. Multiple versions.
CCC is designed to make a working bootable copy of a system so you can move the system to another boot device like hdd and SSDs without the worry.
But I think we were talking about a system that did not see a clean install of Mountain Lion or Mavericks so it is over due for one!

Similar Messages

NEW - 2.4 Westmere 8 Core, 240 SSD boot drive won't start

Brand new, out of the box 2.4 Westmere 8 Core with a 240 SSD boot drive and 12GB RAM will not boot up.
Safe mode won't work.
Boot from disk won't work.
I can't even get the DVD tray to open. I hear no chime on startup then, it goes as far as the gray apple screen then....nothing.
CrN.

Who sold you this?
You dont' get 3rd party from Apple. And who installed the OS?
Pulling the SSD would still let you boot from a DVD as long as it is your Mac's OEM.
Then you can install OS to a drive of your choice that you have on hand.
Yes, take it back.
For $2100 Mac Pro 2.8 4-core, upgrade to 3.3GHz $590, add OWC SSD $240 (120GB, usually more than enough for OS and apps, all the data goes to WD Black 1.5TB $109) and 3 x 8GB RAM (high capacity ram shows 15% boost in memory bandwidth and performance).
I strongly recommend against 2.4GHz - unless you plan a DIY to dual 3.3's - then yes. 2.4's on a PC are good for OC'ing to near 4GHz speeds so they are easy to sell.

How to use ssd as boot drive and hdd as storage on a macbook pro 13

Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one . by formatting using mac software . I would like to run all programs and OS but would love to have my downloads and useless data on run on my 1tb 5400rpm hdd without me have to manual send it there..

Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one
Each drive mounts as a separate volume. There is no convenient way to make them look like one contiguous volume.*
Franky, with an hdd and a ssd I would recommend you put your home dir on the hdd and leave the ssd for the OS and your key applications. It's relatively easy to do and I think better than moving only portions of your stuff.
How to Move the Home Folder in OS X – and Why
* There are ways to to make musltiple volumes appear as one large drive but I think it is beyond the scope of this discussion and not appropriate to this configuration.

Installed new SSD boot drive, Time Machine won't backup

I installed a new 240 GB SSD boot drive (cloned using Super Duper) in my Mac Pro and want to use it as my startup disk. When I boot up using the new 240 SSD drive and try to start Time Machine to back it up onto a 500GB external drive it tells me it failed because the estimated backup size is over 2 TB. I suspect that Time Machine still has the last backup from my old boot drive, which was a 3TB hard drive. I go to Options and tell it not to back up any of my other hard drives but that doesn't help. So now what? How can I get rid of the last backup, which was from my 3 TB hard drive, so that I can backup a 240 GB SSD on a 500 GB external drive? Or is it another problem? Help!! Thanks!!

Problem solved, wasn't using Options/Exclude items properly.

Procedure for SSD boot drive in Mac Pro?

I just purchased a 115GB SSD that I want to use as the boot drive in my Mac Pro running OS 10.6.8. I've read several articles about how to set this up but none seem to be working for me. On the SSD boot drive I want only the essentials: OS, Home Folder, Apps. Everything else (docs, downloads, music, photos, movies, etc.) needs to go on my 1TB storage HD. The problem I'm having using Carbon Cloner and Super Duper to copy the OS, HF and apps to the SSD is they're copying too much data, filling up the SSD with non-essentials (there should only be about 90GB of data being copied but much more seems to be transferred). I can't seem to lean-down what's being moved. Would doing a new install with the Snow Leopard DVD and then copying over only the essential files/folders with Migration Assistant be better, more specific?
Has anyone perfected this procedure, and can give me step-by-step instructions? All help is greatly appreciated!

There are dozens and dozens of threads, MPG, MacRumors and elsewhere.
don't move anything from "home" except the bare essential ~/Library (1GB at most) with CCC and deelect everything else. That should get you down to size.
Before you bought I hope you asdded up the /applications and good estimate. most users can get an OS/apps into 60GB or less (the max I would want to see on SSD you have) FCP and some others or if you hae a lot of large apps - some allow for installing in alternate locations as well as into system/library.
Some - there are always some - have had trouble cloning. Some had trouble with installing, too. Can't win for losing at every turn sometimes.
Been there, but look again at MPG series.
How To Clone a Volume
How to upgrade your system/boot drive
Using Cloning as a Backup Strategy

Bay 1 or bay 2 when installing a 120gig SSD Boot drive with 10.8 into a MacPro 3.2Ghz Quad core ?

Im about to install a 120gig SSD into a MacPro 3.2Ghz Quad core. It shipped with a 1TB Hitachi Ultrastar HDD Sata III, that runs 10.7 and is the boot disk running form bay #1. I plan to run 10.8 on the new SSD and use that as the boot disk.
Should I swap over the Hitachi HDD and SSD so that new SSD boot drive is in bay #1 ? If so am I correct that it would be okay to download and install Mountain Lion on the SSD using bay #2 first and then swap them over once installed ?

Thanks. FYI the planned build is this...
Bay 2 - BOOT DRIVE. 120gig SSD running OS 10.8 plus all apps (although not sure whether to wait a while regarding upgrade to 10.8 ? )
So far Im quite happy with 10.7.3 and the machine seems very stable
Bay 1 - 1TB HDD running OS 10.7.3 (so can boot from this HDD disk if required to should the SSD fail (if or when ). This is disk already running 10.7.3 as boot disk now.
Bay 3 & 4 - On horizon... x2 1TB Western Digital Black Caviar HDD set up with RAID '0' stripe. Not sure on whether to use a RAID 0 or not yet.... Might just go with one 2TB drive... TBC.
BACKUP: 3tb external HDD or Synology DS411j NAS drive
So from what I understand once I've installed the OS on to the new SSD along with any apps, use Carbon Copy Cloner to make an fresh image before I use the system... is that correct ???

Creating a Boot drive and a data drives

I have just installed a new 750 GB hard drive into a PowerMac G5, it had a 160 GB drive already, and I left that in there. I would like to use the older smaller drive as the boot drive, and the newer bigger one as the user data drive.
How do I go about doing it to minimize problems? I can clone the older drive onto the newer one, using disk utility. Once I do that, then what? Please give me some detailed steps.
Where do I divide things up, put system and applications on the boot drive, and users on the data drive? What about Library? What about things like etc, tmp, and var? Will I have problems cloning users? Please help

You do not need to clone to the new drive, unless you want to be able to startup from it.
Just use Disk Utility. Select the new drive in the Disk Utility sidebar. If you just want one partition on the drive, you can use the Erase tab to format it. Select Mac OS Extended (Journaled) as the format type. If you want to partition it and format it, use the Partition tab. One possibility is to create two partition, with one partition being about the size of the 160GB startup drive. You can then periodically clone your regular startup drive to that smaller partition to have a bootable backup (very useful for trouble-shooting). The second partition can be the rest of the space. How you partition the drive is up to you...
You should keep your system and library files on the startup drive. You should generally keep your application files on your startup drive, in the Application folder. You may also want to keep all of default first level folders in your Home (user) folder on the startup drive. These are the folders like Documents, Music, Movies, etc. that are created during the OS installation.
Inside these user folders, I have moved my large folders (such as +iTunes Music+ at <home>/Music/iTunes/) to my second drive. Then I create an alias named exactly like the moved folder, and put it back in the original location. When iTunes is started, it should act like the folder was still on startup drive in the default location. Alternately, you can move the folder and tell iTunes where the new location is in its preferences, but I like using the default settings when possible.
You should be able to take similar actions to put your iPhoto library folder and others on your second drive. If you have sub-folders in your documents folder, you can also alias them to folders on your second drive. Essentially, most of your user-created data can be on the second drive, but it will look like a default setup in Finder and to the system.
There are more technical things you can do, such as move your entire user folder to the second drive. You can look at those possibilities as well...

GT683: swapping RAID0 HD config for non-RAID/AHCI SSD boot drive

A question re: MSI skus which come with 2x HDs in RAID0 config. My system (GT683DXR-603US sku) came with 2x 500GB HDs (WD5000BEKT) in RAID0 config.
First thing I did was to replace this with a Crucial M4 256GB ssd, though prior to this I took an image of the stock system (prior to even booting it up the first time) and restored said image onto the SSD.
The first time I booted off the SSD (no other HD in the unit, as I pulled both of the WD 500GB out to try the SSD alone), I went into the BIOS and changed the SATA config from RAID to AHCI. But Win boot cycle almost immediately resulted in a blue screen. I then changed SATA config from AHCI to IDE, w/the same boot result. Finally, set the BIOS config back to the original RAID, and Win7 booted fine.
Upon confirming SSD Win7 boot and testing operation successfully, I pulled the SSD, place the 2x 500GB HDs back in the system, just long enough to break the RAID 0 array.
Replaced the SSD in the primary bay, and left one of the 500GB HDs in the 2nd bay, and that's how I'm using the system now: Crucial M4 SSD boot drive, WD Scorpio 500GB data drive ... with the BIOS SATA config set to RAID mode.
So the system is working now, but question is - should I pursue trying to change the BIOS setting from RAID to AHCI mode? I'm thinking that in order to get the SATA 6Gbps performance out of the Crucial M4, the Intel SATA config needs to be set to AHCI ... yet apparently I first need to modify the Win7 config (the SATA driver, perhaps?), before I can modify the BIOS sata config?
Any suggestions would be appreciated!

bump ... any thoughts? I'm thinking to leave my sysetm in RAID mode, as from what I've read recently Intel storage mgr supports TRIM in RAID mode as well as AHCI.

Best size for SSD boot drive?

Hi,
I am looking to replace my optical drive from my iMac 27" with an SSD to be used as a boot drive and to hold my applications for faster loading etc..
I was wandering what would be the best size for a boot drive so that I dont overspend as SSD's are expenive.
Thanks for any help in advance.

The best size is the size you need to store OS X and your apps without getting the SSD full. For example, if OS X and your apps take less than 100 GB, you should consider a 128 GB SSD, and if they take 150 GB, go for a 256 GB SSD.
You can buy the SSD at OWC to guarantee the compatibility > http://eshop.macsales.com/shop/SSD/OWC/

BIOS setup for SSB boot drive and 2 RAID 0 data drives

I'm trying to setup my new rig. I was able to get Win 7 to see all drives when plugged into the white SATA connectors. This with no BIOS RAID. If I change the BIOS from AHCI to RAID, Windows fails to boot completely.
After some research, I tried plugging the SSD boot drive into the JMicron controlled blue SATA 7 connector. It works. The 2 WD 640's are in the South Bridge controlled SATA 1-6 connectors (3 & 4). Windows sees the drives with On-Chip ATA Devices set to AHCI. I can setup the 640's with On-Chip ATA Devices set to RAID and the BIOS sees them during boot up, but Windows can't. I did install the RAID drivers as specified in the manual Appendix B.
My system specs are in my sig. I don't see them in preview, so I hope the show up.
So, what did I miss? Thanks if advance for any assistance!
Scott

I did this from the manual appendix B:
Installing the RAID Driver Under Windows
(for Non-bootable RAID Array)
1. Insert the MSI DVD into the DVD-ROM drive.
2. The DVD will auto-run and the setup screen will appear.
3. Under the Driver tab, click on AMD chipset drivers by your need. The AMD chipset
drivers includes RAID Driver.
4. The driver will be automatically installed.
Plus, I installed the JMB36x drive under the RAID button on the MSI CD.

Installation of Production Premium on a SSD Boot Drive

I've receintly built a custom rig with a couple of SSD Drives, a 1TB spinning disk drive, and 2 x 2TB spinning disk drives to be raided. I am using the largest SSD to act as my boot drive and hold my programs. I am just about to Install Production Premium CS6. I intend to load CS6 programs onto the boot drive/SSD, but would prefere that any included CS6 media (video clips or sound clips) reside on the 1TB hard drive. I've done some google serches on installation practices but have found very little. Does anyone have any advice and helpful hints on instalation and the set up and of CS6 media during Installation.
Thanks.
V.C. Wolff

What type of raid do you plan to use with the 2x2tb drives? Also what type of footage do you plan to edit?
Installing Production Premium on your SSD won't be any problem at all, you can just go ahead and do that shouldn't be any issues there. Your idea about putting all your content on another drive is also good, although I'd actually recommend putting all your footage on your RAIDED disk for performance reasons (If you chose RAID-0) then exporting all your content to the 1TB single disk.

Living with a small SSD Boot Drive on New Pro??? Migration?

Hi Folks, I am seriously considering moving to a new mac pro from my 2008 tower. Aside from peripheral issues, my main concern is how to use the smaller SSD boot drive vs. my now current 2T drive? I've been a mac user since 1985 and my user folder with gigs of mail, documents, pictures (iPhoto and Aperture) and videos, etc., plus my application folder, is much larger than a 512 SSD. I now use a 3T drive as a separate movie/video FinalCut drive, so I've stored that separately. It just seems that if I try to do a migration of my current mac to a new one, I'm going to be creating major headaches and problems.
Before I buy something like that, I need to have a good strategy for a move.

You should try your cyrrent system and clone the OS to a 250GB SSD and 2-3TB data drive
The difference is nothing but remarjabke znd easy to do.
The 2600xt really should have been retured already and confivurd your system with 16GB RAM or more
Might be able to get more out if your Mac and get another year or more
Using one drive only is never a good idea.
System - data - projects - media - scratch - time machine
And putting scratch and system on multiple SSDs and on PCIE controller card
And then a GTX 680 or AMD Mac 7950 graphic card
The nMP is faster but it still needs work and yiurs isn't dead

Permissions problem with new SSD boot drive

I recently installed an OWC SSD drive as a boot drive on an iMac I've had for many years. I’m having some sort of permissioning error that I can’t figure out how to resolve.
I’ve setup the SSD as the boot drive (created user named “Boot Admin”). 10.9.3. All data and files remain on my old spinning disk
When the computer first boots, as expected, I’m presented with 2 users at the login screen (“Boot Admin”; Original User Account). If I choose my old user account, I receive the following error:
"You are unable to log in to the user account “<name of original user account>" at this time. Logging in to the account failed because an error occurred.”
If I choose the Boot Admin user I’m able to login without issue as the Boot Admin user (no access to my original apps and data). At that point, I can choose Log Out from the Apple menu and then login using my old user account. When I follow that sequence, I’m able to login with no issues. Apps are there, data is accessible etc. I can enjoy the speed of the SSD.
Although, if browse within Finder to the Boot Admin user on the hard drive, none of the folders are accessible (the little red icon is on the folders). Similarly, if I boot straight into the Boot Admin user and browse to my original User on the hard drive, none of its folders are accessible!
I am at a loss on how to troubleshoot. Ideally, I would like to login in directly to my old user account (eliminate the 2 step — login to Boot Admin, log out, login to Original User) and have full file access to things within both the Boot Admin user and my original user account.
Any guidance or tips on how to troubleshoot? thanks in advance

I appreciate the continued assistance. I'm clearly overlooking something and Google is not my friend! I've tried.
At the expense of repeating myself, I'll share my current configuration:
10.9.3
2 hard drives (new SSD with name "Boot Drive" and original spinning disk "Macintosh HD")
Startup Disk in System Preferences is "Boot Drive"
"Macintosh HD" has 3 User Folders: bootadmin, jayelevy, shared
jayelevy is my home folder - all my documents are in tact
bootadmin has the normal home folder structure
"Boot Drive" has 3 User Folders: bootadmin, jayelevy, shared
jayelevy is empty; no folders
bootadmin has the normal home folder structure (Desktop, Documents, Downloads, Movies, etc), but each is empty with the exception of Movies and Pictures. I've moved my Aperture databases to these 2 folders to take advantage of the speed of the SSD
When I restart the iMac I'm presented with 2 user choices: jayelevy and bootadmin
If I initially select jayelevy, I receive the error mentioned at the start of the thread
If I initially select bootadmin, I can login without issue, but get the standard Mac desktop (not my home).
If I then log out of bootadmin (not restart, but logout) and then choose jayelevy, the signin completes successfully and my desktop/home folder is restored to it's normal and expected condition.
I am still trying to avoid this step of login/logout/login.
I imagine I'm overlooking the obvious, but I'm in uncharted grounds for me! Here I thought the hardware swap to replace my optical drive with SSD would be the hard part. That was simple! I've stumbled on the software side!

Using existing 1Tb Home Folder from new SSD boot drive

So, I am completely stuck.
My plan;
Mac Pro (2008) with RAID card. 4x750Gb drives as RAID5, Home Folder is resident there at 1.25Tb.
Purchased 160Gb SSD. Performed clean install of 10.6.7 on it connected by e-SATA.
Migrated Applications. Booted into SSD; Used Advanced Users from System Preferences to point at original Home Folder on RAID.
My result ;-)
50% success but many of the sub folders in ~Library are locked with permissions. Preferences, Mail etc.
Everything is 100% OK when I boot from the original Raid (which is great as a fallback)
My hope;
That there is some way that the original Home Folder would be 100% fine when referenced from the new SSD boot drive.
£1,000,000 to the first MacWiz to help me solve this... (joking about the £1,000,000 but I would be very, very grateful indeed)
Cheers

Hi all,
I just went through a similar issue and solved it with a little persistance.
Follow these steps:
1) All you need to do is cmd + i or "get info" on the folders you want access to
2) in the bottom right of the window that pops up click the small padlock symbol
3) enter your password (the login password for you mac) to "authenticate"
4) Click the arrow by "sharing and permissions" to open that drop down
5) click the + button in the bottom left corner
6) in the new window that pops up click administrator or your specific user (both work fine)
7) when it adds that user click the "privilege" and choose Read & Write
Hey presto, when you refresh the finder window the folder will be accessilble!!!
Yay

I have both the 250 gb high performance hard drive and a 1 ter byte hard drive. What happens when the 250 gb hardrive is full?

I have both the 250 gb high performance hard drive and a 1 ter byte hard drive. What happens when the 250 gb hardrive is full? This on Imac desktop

Never let a drive get more than 80% to 85% full.
AND keep 50-100 GB of free space on a startup drive to allow proper function of virtual memory in all OS X versions from 10.5x to current versions.
10.4x can get by with 20 GB of free space on the boot drive, but more is always better.
I try and keep all boot drives between 50 and 60% of capacity.
Beyond 60% and up to 90% capacity, seek times increase almost exponentially; performance suffers.

Cloning Hdd to SSD boot drive and what happens with Music/Logic Plugins

Similar Messages

Maybe you are looking for