Cloning is third party software required?

I'm getting ready to update my hard drive to a hybrid in a brand new 2012 13 mac book pro but couldn't find a clear answer.  Do I need an outside program like superduper or can i just use disk utilities?
I saw the following answer but it was back in 2007
"Yes, or you can use the Restore option of Disk Utility:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
For added precaution you can boot into safe mode before doing the clone."

You can use Disk Utilities to clone your hard drive, some people prefer CCC and others, but I think Disk Utility is just fine.  If you use something like TimeMachine, you could also do a full install and restore on the new drive.

Similar Messages

  • Will upgrading to OS X Maverics require me to reinstall any third party softwar i.e photoshop, after effects etc.

    Will upgrading to OS X Maverics require me to reinstall any third party softwar i.e photoshop, after effects etc.

    Wait for testing.
    Do your own testing. Clone your system first.
    Do a clean install of 10.9 on another drive and then use that with Setup Assistant or Migration Assistant if you want.
    I would not update over the old system - at least not w/o a safety backup net to catch you.
    There are always a couple things that need fixing. And it may be that they won't know until they have the final bits and do their own inhouse testing now that they have the actual release version.

  • Intune & Third Party Software Automatic Updates

    Can Windows Intune ensure third party software such as Java, Adobe Reader, & Flash is updated? I at-least want an email when a PC has an out of date version of the above software. If Windows Intune can't do
    this, any recommendations?
    We're a small business that simply uses Windows Intune and Office 365. Recently a PC had a vulnerable/out of date version of Java and visited a compromised site, resulting in a nasty virus. Obviously I don't want this to happen again.
    Update: I ended up using GFI Cloud's patch management to address the lack of automatic third party patching in Windows Intune.

    That requires manually uploading patch files for third party software daily... I'm looking for something that can automatically update common third party software that cause major security concerns, or at-least notify me when they are out of date.

  • Payment proposal data to be transfered to third party software

    Hi,
    I want to transfer prposal data to third party software to write check and attach digital signature. And once checks are prepared want to bring that data in SAP for payment run to generate accounting entry. I was wondering which BTE can help me in programe SAPF110V. Or if there is not any BTE that can be used after proposal is done what approach can be followed.
    Thanks

    Hi DHANANJAY,
    I have a requirement like need to send mail after the payment run (After F110).
    I need to send mail to vendors just after finishing the payment run i.e. After getting the message like Posting orders : X Generated, X Completed. I have a Zprogram to send mail , just i need to code such that it will schedule a job(ZPROGRAM) in background after 1 min . Is there any exit , BADI or BTE to do the same. I searched for some BTE's like 2040 and 2050 , but those are used to send mails after the form printing. I dont need to go for printing the payment advice . Please help me in this regard.
    Thanks,
    Bhanu.

  • Problem installing third party software

    I have encountered an issue whereby on trying to install downloaded upgrades to third party software I am asked to insert a disk entitled with my user name. At first I put this down to dodgy software, but have now had the same issue with installing Adobe Acrobat Reader 9.0. The installation software appears to be something called iNosso.
    Essentially the installation gets as far as stating "This software was successfully installed" but before coming up with the summary window comes up with:
    *Please insert the "username" disc to*
    *continue installation.*
    You have chosen to install software that requires this
    disc.
    (username isn't actually shown what is shows is presumably the local name I have given to the computer).
    No such disc exists and have tried the original installation discs for 10.5 but to no avail. I end up force quitting the installer but am concerned that by doing so I may corrrupt the installation and build up problems for myself going forward.
    Has anyone else encountered this issue and if so is there a fix?
    Thanks in advance.

    Allan, I had hoped not to have to go through the steps you suggest as one of the reasons for doing Migration Assistant was to avoid re-installing all my applications and all the relevant license information. Also note that my old apps are running fine it is just third party installers that appear to be the issue. As a test I ran the Apple installer loading some additional apps that came with the computer with no issues. I would also add that all my applications old and new appear to be running without issue. Indeed even those apps affected by this installation issue (incl Acrobat Reader 9.0) seem to run normally so it does appear to be an annoying glitch in the installation that simply stops the automatic completion of the process.
    My nervousness however is that something more sinister is going on in the background that I am not aware of that may affect the performance of the computer going forward.
    However from both yours and Barry's comments it would appear that this is not a common fault therefore is likely to be peculiar to the way I have set things up so in order to resolve I will have to try either re-installation of everything per Barry or a re-installation of apps as you suggest. Now I just need someone to find me the time!!
    If anyone else has come across this issue before and found an easier resolution I would be eternally grateful. Thank you Allan and Barry for the speed of your responses and your suggestions.

  • Integration between third party software and SAP

    Hi all,
    I have requirement in which i have to integrate SAP with third party software. My third party software will be generating material no as we generate in SAP then after the generation of the Material No by the third party software again i have to pull the material no generated and corresponding information into SAP .Please tell me how to do this as i am new to these concepts and if possible please send links from where i can download study materials.
    Thanks and Regards
    Manu.

    Hello Manvendra,
    There are many approches for solving this integration issue:
    But before solving this issue there are few questions which need to be known:
    1. In what form the material no list is generated? i.e. some flat file, in database table, or shared memory
    2. What is the language for 3rd party software? C, Java, .Net etc
    3. What is the frequency of material number generation? i.e. is it on demand, batch processing etc
    Considering 3rd party software is generating flat file or csv files for material number we can have this integration in
    following way:
    1. Save file at particular location.
    2. You can configure logical path in FILE transaction
    3. Write ABAP report to read that file using logical path and file name.
         Refer following link for Link: [logical path creation|http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm]
    4. Read file into internal table using Link: [GUI_UPLOAD|http://saplab.blogspot.com/2007/10/sample-abap-program-to-upload-table.html].
    5. Create BDC recording for MM01 transaction for material creation using Link: [SHDB|http://abaplovers.blogspot.com/2008/02/recording-bdc-using-transaction-shdb.html] transaction code.
    6. Using data from internal table and BDC recording create all the materials in SAP systems.
        In this step you need to loop at internal table and fill data variables in BDC recording with the internal table data
        and call the transaction MM01 for creating material.
    Above steps are very high level guidelines and it is one way of integration but concept wise more or less integration will be in same way!
    You can definetly fine tune it by exploring SAP help!
    Enjoy SAP!
    Thanks,
    Augustin.

  • Need Third Party software recommendation - duplicates management and remova

    I have read several dozen discussions addressing duplicate file/song removal from itunes, and many recommend third party software. While there is a 'show exact duplicates' command in itunes at Shift:File->Show exact duplicates, in my case all it did was show all of my songs, 8,440 instead of the actual 4,220 that are in my library. I'm not sure of the purpose of this command, perhaps it works for someone but not me.
    Absent the ability to add a user defined column in itunes that would have the capability to perform an Excel-like function to number each row, allowing the sorting of odd/even numbers or some such scheme, I guess users with thousands of songs who have fallen into the duplication trap are required to purchase third party software to correct this, or just go ahead an begin whatever medical procedures purport the relief of carpal tunnel syndrome.
    Does anyone have recommendations of software they have actually used, paid, share or free?
    Thanks.

    Would that I be so lucky! I reinstalled my Vista OS and was adding back all of the programs and data, so all of the music had the same 'date added'. However, I have just this moment solved my own problem. Here is what worked for me:
    1. I downloaded freeware from the website LCIBrosSolutions.com which does indeed identify duplicates in the iTunes file and will erase them.
    2. However, now you are stuck with broken links (i.e. "!" songs) in your iTunes, and need to eliminate them. What I did was go into the View choices, and picked something that I would never use. In my case, I picked "Episode Number" and added it as a column. Then, I went to "select all" and highlighted all 8000+ song names. Right clicking gave me "Get Info" after the warning, and then I went to the video tab and entered the number 4. I un-highlighted, sorted on the Episode Number Column, and since the song names with no real content would not accept the number 4, they were at the bottom, and were all duplicates. I deleted them.
    The way to verify that you do indeed have broken links is to sort by song name, and see that every other one does have an ! by it.

  • Regarding third party  Software  which genrates screen (prototype)

    Hi ,
    Is there any third party software available which can be use for  generating SAP  screen prototype like without doing coding we should be able to generates screen , and attached to Functional specification as a proposed screen , please suggest or give a name of the software if anyone knows . for example i want a screen to be enhanced with a new field , of a selection screen with two radio button and check box  so any software which will give a prototype of this kind of requirement .
    Thanks in advance
    Rajeev

    Hi,
    Please take a look at this link: www.synactive.com ->Tutorials -> GuiXT
    Regards,
    ScriptMan

  • Third Party Software to Manage iPhone music libary across multiple PCs

    Can anyone recommend third-party software to get around the "An iPhone can be synced with only one iTunes libary at a time?"  I get this warning when I try to change settings to manually manage music and videos, which you would think would allow me to drag and drop an album off my main desktop music library to my iPhone, or from my smaller laptop music libary to the same iPhone when I am not at home.  From Apple, I appear to be locked into picking one primary library.  There has got to be a better way.  (The kb/ht1202 article does not solve this issue).

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entires and import the local content you have on that box.
    tt2

  • Third Party software's to be launched from SharePoint 2013

    I have a strange requirement of launching couple of third party software's from a SharePoint site. Here is one of the application, this application is used for time management which sync's to a central server (I think). It has a user interface where user
    can capture his/her time and then save it. Now, my client wants to launch this application from his SharePoint site like an icon should be there on the site and users can click it from company's external SharePoint site and use the application. The current
    situation is that application is installed on the SharePoint server and now we need to host it on a SharePoint library or anywhere (may just a link) but as per my understanding we cannot do that so I wanted to check with all admins if they have ever encountered
    such request or even is this doable?
    Regards,
    Shiv Yadav
    Shiv Yadav(MSCA)

    If it's a web app, you can integrate it leveraging the Secure Store Service, but I've got the feeling it's a client application. Of course, this falls outside the control of SharePoint or the browser, but you can display a link pointing to a local client
    in HTML in a SharePoint page. If it's there, a dialog window appears and if the end user agrees the client app is started (of course, it is not possible to start client apps at will from a browser, this would be far from a desirable situation). The code would
    be like so:
    <html>
    <body>
    <a href="C:\Program Files (x86)\Microsoft Lync\communicator.exe">Launch</a>
    </body>
    </html>
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • Sync to Outlook/Exchange-Third party conduit required?

    I am retiring my Palm OS PDA to replace with iphone. When syncing the palm to Exchange-based Outlook, the palm desktop did not sync correctly and required that I use a third-party software such as Chapura for the conduit. (Chapura was often bundled with the palm software and device).
    With iphone syncing to Outlook on Exchange, will I need a third-party conduit program? Suggested conduit applications that have worked for anyone?
    Thanks much.

    I do not believe so. I dont believe the iPhone could even utilize a third party conduit program. It should sync just fine. As of right now the iPhone will only talk to iTunes for means of syncing.
    Hope this helps.

  • IDocs for Notification and Work Order messages to third party software

    Dear all,
    Our client have a third party software in which he intends to manage the Notifications for PM. Now he wants that, when the Notification is created into SAP, the Notification number from SAP to be sent to the third-party software. Also, from the WO created from the Notification, to the third party software have to be sent the WO number and the status of the WO and, each time the status of the WO is changed, the new status have to be sent to the third party software, until the status of the WO is TECO.
    Please, can you help me, I am totally uninitiated of the IDocs and I don't know if there are some standard IDocs that can be used for this and how to manage them.
    Thank you very much for your help.
    Kind regards,
    Sorin

    Hi Sorin, 
    There are idoc types INOTIF and IORDER available but please refer to SAP note 812542 which states that the recommended way of transferring the data to third party software is to make use of the available BAPIs. Please note, the mentioned idocs will not benefit from future developments, but they
    will still be  supported in their current state. 
    However, please refer to the existing PM BAPIs in transaction BAPI. Specifically BAPI_ALM_ORDER_GET_DETAIL and BAPI_ALM_NOTIF_GET_DETAIL can be used to read
    data from the order and notifications. This data can then be exported in a way that suits your requirements.
    I hope this helps,
    Siobhan

  • If I upgrade to Lion do I need to reinstall my third party software?  Office, etc

    If I upgrade to Lion do I need to reinstall my third party software?  Office, etc

    If you install Lion in place and are using versions supported in Lion, no.  You should check with your third party software vendors to see whether upgrades are required to work with Lion.  For example, since you mentioned Office, the 2008 and 2011 versions are compatible with Lion.  The 2004 version is not. It is generally a good idea to upgrade your apps first, and then upgrade to Lion, as you may sometimes need the older version of the app to migrate data to the new version.

  • ODI Third party software usage

    Hello,
    I am looking for the information, which different Third party softwares/drivers etc ODI used in its architecture.
    Could you guys let me know if you have any idea.
    Thanks in advance.
    -- Harshad

    I am trying to find out what magic is required to transfer photo's from an Album/Library to the Camera Roll because it appears that the Windows program defaults to the camera roll only.

  • Uninstall third party software

    How do I uninstall third party software. I want to make sure all the application has been deleted.

    In general, if the program has an uninstaller, use it. Third party modifications to OS X require an uninstaller to ensure those modifications are removed.
    Otherwise, simply drag its icon from the Applications folder or wherever it happens to be installed (not the Dock) to the Trash. If its icon remains in the Dock, drag it a distance away from the Dock sufficient for it to disappear in a cloud of environmentally correct smoke.

Maybe you are looking for

  • Total and Subtotal for set_table_for_first_display

    Hello, I am displaying data in ALV by using set_table_for_first_display , i want to do_sum  for 10-15 columns starting from the column index 11.. and i have also passed the value in internal table of type LVC_T_SORT and in the fieldcatlog this fields

  • C6 Problem with Google Sync

    I have a brand new Nokia C6 with me. In this i cant synchronize my contacts or calendar. Whenever i try to connect it is givind a message like "Your Account does not have permission to synchronize with curren settings. Contact your administrator." Ca

  • How to use XML data stored in table column in XML Data Definition

    Hi, We are using BIP 5.6.3 (Oracle EBS R12). We have a table which stores XML data in a column. Is there a way we can use this XML data through a SQL query in XML Data Definition of BI Publisher report instead or writing whole SQL query to fetch same

  • Excel14.4.7 (Excel for Mac 2011); can't sort data

    Upgraded to Excel for Mac 2011 (v.14.4.7) and cannot sort data. Have read instructions but keep getting error message "missing column/row name" Tried doing it with box checked "My list has headers" and with the box unchecked....same non-result and er

  • Templates and Tabs layout

    Hi , I would like to know if is possible in OraclePortal to increase the tabs thickness . Like the red tabs of this page , that contains links ( Oracle Technology Network , Collaboration , MyForum ), and the User Welcome. I hope you have understood m