Cloning Oracle Applications Release 11i

Hi,
for Cloning Oracle Applications Release 11i , is it ncessary to copy jre, oui and oraInventory directories from source database tier file system to trget ?
Many thanks before.

Applications / EBS is discussed in this category http://forums.oracle.com/forums/category.jspa?categoryID=11 (and there are more, if you look at the forums home page)
But, in general the oraInventory must exist to be able to patch or otherwise maintain the installation. Wouldn't think copying directories is a supported cloning method... Again, check with the proper forum. And use the Search function!

Similar Messages

Cloning Oracle Applications Release 12 with Rapid Clone

Hi,
I was going through metalink doc 406982.1 Cloning Oracle Applications Release 12 with Rapid Clone.
I couldn't understand a few points.
I would appreciate if someone can guide me regarding the following queries.
There is a statement in the doc
1)An important principle in Oracle Applications cloning is that the system is cloned, rather than the topology ....
--What is meant by topology in this description?
2)The Cloning methodology posted on this document requires full Autoconfig complience.
--didn't get this point.
3)Note: In the copying tasks below, UNIX/Linux users should ensure that the symbolic links (soft links) are preserved when copying. On most UNIX platforms, this can be accomplished with the cp -RH command. Consult the UNIX man page for the cp command to check the parameters available on your platform.
--what soft links are being talked about?will the regular cp -R command not preserve the soft links?
4)For patching AutoConfig on the E-Business Suite R12 instance, AutoConfig needs to be enabled on both the applications tier and the database tier. (387859.1)
--HOw do I check if AutoConfig is enabled or not?
5)Why do I need to synchronize appsutil on database tier from application tier?
6)Why do we need to maintaain snapshot information?
What does snapshot actually do?
Thannks,
Rushi

This is what I get when doing "grep rror" from 9239089 logfile.
will be ignored without error.
will be ignored without error.
will be ignored without error.
0 files had fatal errors.
0 files had fatal errors.
Performing second half of mirrored copies...
No mirrored copies were executed in this patch.
oracle/apps/ad/splice/adError [120.0.12010000.1] {oracle/apps/ad/splice/adError.class }
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/forms/java/frmall.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3-nls.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/lib/xmlparserv2.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/oafm/applications/mapviewer/web/WEB-INF/lib/mvclient.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/mail.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/activation.jar: No metadata entry META-INF/JRIMETA.DAT found
oracle/apps/media/ieu_status_error
oracle/xml/parser/v2/XMLErrorMsg
oracle/xml/parser/v2/mesg/XMLErrorMesg
oracle/xml/parser/v2/mesg/XMLErrorMesg_ar_AE
oracle/xml/parser/v2/mesg/XMLErrorMesg_ca_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_cs_CZ
oracle/xml/parser/v2/mesg/XMLErrorMesg_da_DK
oracle/xml/parser/v2/mesg/XMLErrorMesg_de_DE
oracle/xml/parser/v2/mesg/XMLErrorMesg_el_GR
oracle/xml/parser/v2/mesg/XMLErrorMesg_en_US
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_AR
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_fi_FI
oracle/xml/parser/v2/mesg/XMLErrorMesg_fr_FR
oracle/xml/parser/v2/mesg/XMLErrorMesg_hu_HU
oracle/xml/parser/v2/mesg/XMLErrorMesg_it_IT
oracle/xml/parser/v2/mesg/XMLErrorMesg_iw_IL
oracle/xml/parser/v2/mesg/XMLErrorMesg_ja_JP
oracle/xml/parser/v2/mesg/XMLErrorMesg_ko_KR
oracle/xml/parser/v2/mesg/XMLErrorMesg_nl_NL
oracle/xml/parser/v2/mesg/XMLErrorMesg_no_NO
oracle/xml/parser/v2/mesg/XMLErrorMesg_pl_PL
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_BR
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_PT
oracle/xml/parser/v2/mesg/XMLErrorMesg_ro_RO
oracle/xml/parser/v2/mesg/XMLErrorMesg_ru_RU
oracle/xml/parser/v2/mesg/XMLErrorMesg_sk_SK
oracle/xml/parser/v2/mesg/XMLErrorMesg_sv_SE
oracle/xml/parser/v2/mesg/XMLErrorMesg_tr_TR
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_CN
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_TW
Errors and warnings are listed in the log file
Also I am getting same kind of errors for patches 8919489,9171651,9833058 and 12404574.
Although there were neither failures nor any ORA- error in any of the log files.
Please guide what needs to be done regarding the shown errors for the patches.
after executing adpreclone on db tier I got the following message in logfile.
error while preclone on db tier:Attempt to remove existing adcrdb.zip failed
What could have been wrong?
Is the message normal and can it be safely ignored?
As a pre-install task of patch 9239089,I executed adgrantsall.sql
which gave me a prompt Enter a value for 1:
I entered apps (apps schemaname/username)
Is it ok?
Thanks,
Rushi

Oracle Applications Release 11i with Oracle Database 10g Release 2 (10.2.0)

Hi,
I am upgrading our Oracle EBS 11i database to Oracle 10g R2 as per note:362203.1.
In section After the Database Upgrade --> 5. Implement and run AutoConfig we need to refer to Note:165195.1.(Section 8: Migrating to AutoConfig on the Database Tier).
Since I dont have the DB enviornement file, I created one by copying the envioroment file from Oracle 9i Home and replaced 9.2.0 with 10.2.0. I also created Apache directory under Oracle 10g Home and copied perl directory from Oracle 9i Home/Apache to Oracle 10g Home/Apache. This way I got the DB enviornement file for Oracle 10g Home.
Then I used the following command to create the DB Context File:
perl adbldxml.pl tier=db appsuser=apps
Then executed autoconfig using:
adconfig.cmd contextfile=<Full path to the CONTEXT>
Is this the way I should do? Its working ok but I am not sure if my method is ok.
Plz suggest if some other method is there.
Thanks.
Thiru

This is a way I used to do it too. I am not sure whether it is the official way, but it works nevertheless.
Do make sure you run autoconfig afterwards, which will create a new environment file for you. Then stop listener and database, source the new environment file and restart listener and database.
I found some other procedure in order for you to recreate the environment file:
1. On the application tier, Execute $AD_TOP/bin/admkappsutil.pl to generate appsutil.zip for the database tier.
2. Copy this appsutil.zip to the database tier and unzip it into the ORACLE_HOME
3. Set the following environment variables:
ORACLE_HOME =<10g ORACLE_HOME>
LD_LIBRARY_PATH = <10g ORACLE_HOME/lib, 10g ORACLE_HOME/ctx/lib>
ORACLE_SID = instance name running on this database node.
PATH= $PATH:$ORACLE_HOME/bin;
TNS_ADMIN = $ORACLE_HOME/network/admin/<context_name> 4. Edit the $ORACLE_HOME/network/admin/tnsnames.ora file. Change the aliases for SID=<new RAC instance name>
5. Modify the listener.ora. Change the instance name and Oracle Home to match environment
6. Start the listener.
7. From the 10g ORACLE_HOME/appsutil/bin directory, create an instance-specific XML context file by executing the command:
adbldxml.pl tier=db appsuser=<APPSuser> appspasswd=<APPSpwd>8. De-register the current configuration using the command:
perl $ORACLE_HOME/appsutil/bin/adgentns.pl appspass=apps contextfile=$CONTEXT_FILE -removeserver9. Rename $ORACLE_HOME/dbs/init<rac instance>.ora , to a new name (i.e. init<rac instance>.ora.old in order to allow AutoConfig to regenerate the file using the RAC specific parameters.
10. From the 10g ORACLE_HOME/appsutil/bin directory, execute AutoConfig on the database tier by running the adconfig.pl script.
Now you should have the officially created environment file.
HTH.
Arnoud Roth

Oracle Application Server 11i

Hi,
Is there any information about when OAS 11i will be released?
regards,

Definitely there will be some additional steps like creating ASM instances/diskgroups and converting your database to RAC.
Please refer to the following notes for more details.
Note: 362135.1 - Configuring Oracle Applications Release 11i with 10g R2 RAC and ASM
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362135.1
Note: 388577.1 - Configuring Oracle Applications Release 12 with 10g R2 RAC
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1

Reg: oracle application database 11i

Database Version:9.2.0.6.0
Application version:11.5.10.2
OS version: Redhat linux 4Es
I want to upgrade the database 9.2.0.6.0 to 10.xxxx , please give me the solution.
Regards
D

Hi,
Please refer to (Note: 362203.1 - Oracle Applications Release 11i with Oracle 10g Release 2 (10.2.0)).
If you want to upgrade to 11g (which is also certified with Oracle Apps 11i), please refer to (Note: 452783.1 - Oracle Applications Release 11i with Oracle 11g Release 1 (11.1.0)).
Regards,
Hussein

Oracle Application Release 11 having error

Hi all,
I'm having problem with our Oracle Application Release 11. When I create a new Responsibility in General Ledger, I follow the exact step to create responsibility. But when I use the responsibility to open a Form in AP>Setup>Payment>Format , it gives us this error message->>> FRM-40735 PRE-FORM trigger raised exception NO_DATA_FOUND
This is the first time we create responsibility after doing upgrade and patching. Could it probably have mess things up?
Thanks for any reply!!! Really appreciate it if anyone out there can guide us on this.

OK... i ve found the answer on this
http://www.orafaq.com/forum/t/61820/0/?

Oracle Applications Release 12 and Oracle Warehouse Builder 10gR2

Hi
I'm trying to deploying process flows to Workflow but I get the following error:
RPE-02054: The version of Oracle Workflow is incompatible with this Control Center. Required 2.6.3, but found 2.6.0.
Comment I found on another thread: "As far Workflow Versions with Oracle Applications is concerned, it is always 2.6.0. Workflow is not identified with its 2.6.x versioning in Oracle Applications. The 2.6.x.x versioning is purely for Workflow Standalone."
Oracle Warehouse Builder Client: 10.2.1.31
Oracle Warehouse Builder Repository: 10.2.0.1.0
Oracle Applications Release 12
Any help would be appreciated.

May be the excerpt from the other thread is a response I posted.
So, when you say, deploying process flows to Workflow, I do not understand what you are doing exactly? If this involves the Oracle Warehouse Builder you may want to explain a little more in detail since I do not understand how OWB works with Workflow. But as far as I have heard, it is Workflow standalone that is packaged with OWB but you are deploying into Oracle Applications.
What is the version of Oracle Workflow Builder you are using?
Is the steps you are doing certified to be done with Oracle Applications R12?
Thanks

How to setup cash forecasting in Oracle Applications Release 12

Hi,
Is there any document/note/presentation which explains how to setup cash forecasting in Oracle Applications Release 12.
Balu

Thanks alot Mahesh Jayashan. I checked on following tables the DATA for year 2011 didnot exists it only contains for Previous Years and Months.
1- W_MCAL_PERIOD_D
2- W_MCAL_QTR_D
3- W_MCAL_YEAR_D
4- W_MCAL_CONTEXT_G
FOR TEST basses I Manually inserted Data for 2011 to W_MCAL_YEAR_D Table so data was shown on Dashboard for Year but i wasn't able to See for 2011 Months cause i didn't Manually inserted data in other tables.
Thanks man
chreeez
Edited by: 862383 on May 30, 2011 10:19 AM

How to reduce the size of cloned Oracle Applications Instance

How to reduce the size of cloned Oracle applications instance, so as to save the storage space for the cloned systems.
How can we remove unimplemented modules in the instance so that we can reclaim the space occupied by them.
can any please suggest on this..?

mumbai,
I would recommend to leave it as it is.
If you can add some inexpensive HDD to your test system then do so.
The Apps DB storage decreasing process is quite painful and isn't straightforward.
You cant just delete unused schemas & tablesapces (if they are not used than they are not consuming reasonable space anyway). The modules in Apps are using each other procedures and objects. The effect of deleting one module (schema) is highly unpredictable.
If you will do something like that than you will not be able to patch your cloned system after that.
Some things can be done however in order to reduce size of a testing Apps system:
- Decries UNDO & TEMP tablespaces. Normally you do not need that big tbs in test system as you have got in the production.
- If your REDO LOG files are quite big and you have got a lot of redo groups you can recreated smaller REDO log files.
- On Apps tier you can delete OUTput and LOG files
In case you still would like to decrease data volume in your testing system you need to take a look on some tools which provide data subtracting capabilities from Apps DB. This process has to be quite intelligent. The tool have to know the data structures in APPS DB and subtract data in the way to not harm logical relationships between records. After a subtracting process you will need to make multiple FULL exp/imp cycles in order to reduce physical space consumed by the database. Beside the fact that those tools are quite expensive you will need to spend a lot of your time to implement those.
BTW: That is the size of you production DB? Have you analyzed which module takes most of the space? May be you can identify top 10 objects and try to archive a data from those object preventing the future grow of the production database.
Just my 0.02£
Yury
Check this out:
A.
http://www.freelists.org/archives/ora-apps-dba/05-2006/msg00000.html
B.
- Users can subscribe to your list by sending email to
ora-apps-dba-request_at_freelists.org with 'subscribe' in the Subject field
C.
http://www.freelists.org/archives/ora-apps-dba/05-2006/threads.html

Re:Cloning Oracle Applications with Discoverer .

HI ,
We have configured Discoverer 11.1.1.4.0 on R12.1.3.
Request to kindly provide the document id to clone R12.1.3 including 11.1.1.4.0
Regards .

We have configured Discoverer 11.1.1.4.0 on R12.1.3.
Request to kindly provide the document id to clone R12.1.3 including 11.1.1.4.0Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
http://download.oracle.com/docs/cd/E17904_01/index.htm
http://www.oracle.com/pls/as111140/search?word=Cloning&Search.x=0&Search.y=0&Search=Search
Thanks,
Hussein

Will Oracle Apps Release 11i use Reports 6i

Will the forthcoming apps release 11i be using reports 6i (and
developer 6i)?
null

Yes - Reports 6i will be used by Apps Release 11i.
Regards
The Oracle Reports Team
Mrushad Patel (guest) wrote:
: Will the forthcoming apps release 11i be using reports 6i (and
: developer 6i)?
null

Migrating to Linux with Oraacle Application release 11i

Hi There!
I would appreciate your expert advice on migration of Oracle EBS 11i from Solaris to Linux.
We are following Oracle Metalink Doc id 230627.1 & 331221.1 (db 10gR1)
To give a brief picture on the environment, we have 4 servers, PRODUCTION on 2 servers (2 nodes, 1 db, 1 application), TEST on 3rd server and 4th one will act as target for migrating production multi node to single node (Solaris to Linux).
We have planned to make a fresh clone from production to test, it will be multi node to single node clone, then from the cloned test will migrate to Linux on new server (4th server) which will be a single node configuration.
I would like to have advice on the last stage of this process, since the final goal is to migrate the production from Solaris to Linux and we are using cloned instance on TEST for testing the whole process, will it be appropriate to export just the production database to the 4th server using datapump (while importing TABLE_EXISTS_ACTION = TRUNCATE) once the TEST instance is successful migrated to the 4th server? Rather than repeating the whole process again from PRODCUTION to the 4th server.
My point here is since this whole process of migrating the TEST to the 4th server might take a weeks time, the difference between the newly migrated 4th instance and the PRODUCTION will be a weeks data (since the 4th server is migrated from TEST which in turn is a clone of PRODUCTION), so by using datapump we will try to import up to date data from the production to the 4th server, this will save time and efforts by not repeating the whole process from PRODUCTION to the 4th server again. Or is there any better way of achieving this?
Regards.
AK.

What exactly is not supported?
i.) The parameter TABLE_EXISTS_ACTION = TRUNCATE while importing from a full export 'or' This option.
Please correct me if I have understood it wrong, do we still have to migrate the application, since the application is already migrated from TEST instance to the 4th server (the TEST instance happens to be a clone of the PRODUCTION). The only difference we have here is the data that to a week’s data ie the data generated on PRODUCTION instance since it was cloned to TEST. So will it be necessary to do the process all over again.For the application tier node, the simple answer is no (as long as no changes have been done at the application tier node, i.e. applied patches, created new custom forms/reports, ..etc).
If we are importing data into the migrated 4th server from PRODUCTION's full export file, how will DATAPUMP react when it come across already existing database with the same tables, because at this stage i will not be creating the database all over again, since it is already existing when we migrated the db and application from TEST to 4th server (according to the doc). One extra step i will perform in this approach, after importing the DB I will run post clone script on DB just to update tables with node information.The target instance should be clean when you migrate the database tier node, and this explains why the option of using the import parameter is not supported.
As you mentioned above, please log a SR and update this post when you hear back from the Oracle support.
Thanks,
Hussein

Oracle Applications Release 12.1.1 installation on windows 2003 failed

Hi All,
I am installing oracle 12.1.1.0 on windwos 2003 SP2.
I received some errors at the step 1 of 5 and till 13% of installation.
THe following are the errors reported in the Install log file located at:
Database logfile - F:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_stccspr01\08101732.log
E:\StageR12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/usr/bin/cl
'cc' is available.
/usr/bin/link
'link' is available.
ERRORCODE = 0    ERRORCODE_ENDThe system cannot find the path specified.
========================================================================================================================================================================================================================================================
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>(echo APPS & echo APPS ) | E:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;E:\StageR12\startCD\Disk1\rapidwiz\jlib\java;E:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;E:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e F:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_stccspr01.xml -stage E:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at F:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_stccspr01\ApplyDBTechStack_08101752.log
|      0% completed
/      0% completed
-      0% completed
\      0% completed
|      0% completed       RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>if 1 == 0 goto :ICFG_OK
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>if "" == "TRUE" goto :ICFG_OK
    RW-50010: Error: - script has returned an error:   1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instanceAfter further investigation in the following logfile Log file located at F:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_stccspr01\ApplyDBTechStack_08101751.log, i found the following errors:
Skipping Profile Phase
Skipping Apply Phase
Not able to rename adcvmlog.xml to F:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_stccspr01\adcvmlog.xml.08101752
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: F:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_stccspr01
      adsvdlsn.cmd            INSTE8_SETUP       1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStacksearched some notes on google, but didn't found anything preoper.
Please let me know what are the possible cause of this error and how to correct it.
Let me know, if you need any further information.

Hi,
THe installation started successfully and went beyond 13%. but at Step 3 of 5 i got another error and installation was completed till 53%.
Error occurred in ApplyAppsTechStack stage :
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
ill be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\oracle\LOCALS~1
\Temp\1\OraInstall2011-08-12_01-07-46AM. Please wait ... Oracle Universal Instal
ler, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
...............................................................Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
path: C:\DOCUME~1\oracle\LOCALS~1\Temp\1\OraInstall2011-08-12_01-07-46AM\jre\bin
;.;C:\WINDOWS\system32;C:\WINDOWS;E:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:
\Perl\site\bin;C:\msvc\VC\bin;F:\cygwin\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\W
INDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WI
NDOWS\system32;C:\Program Files\Microsoft SQL Server\90\Tools\binn\
toload is C:\DOCUME~1\oracle\LOCALS~1\Temp\1\OraInstall2011-08-12_01-07-46AM\Win
dowsGPortQueries.dll
100% Done.
Copying files in progress (Fri Aug 12 01:08:35 BST 2011)
.................................................Val: 0
.               79% Done.
Copy successful
Setup in progress (Fri Aug 12 01:08:42 BST 2011)
.....Oracle JAAS [Fri Aug 12 01:09:20 BST 2011]: exception: 9
opmnctl: opmn startedwe got the following errors in the following two logfiles:
1. Logfile located at :
E:\oracle\VIS\inst\apps\VIS_stccspr01\logs\08112230.log
/      3% completed
-      3% completed
\      3% completed       RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>if 1 == 0 goto :REG_OK
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\oracle\LOCALS~1\Temp\1>if "" == "TRUE" goto :INSIAS_OK
    RW-50010: Error: - script has returned an error:   1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance2. Logfile located at :
E:\oracle\VIS\inst\apps\VIS_stccspr01\admin\log\ApplyAppsTechStack_08120107
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I E:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
      ouicli.pl               INSTE8_APPLY       -1
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drvPlease find the complete logs files details at the following link:
http://www.filefactory.com/file/cde9fc8/n/Oracle_R12_Apps_TIer_INstall_logs_txt
Name of the logfile is: Oracle R12 Apps TIer INstall logs.txt
Please have a look at it and let me know what could be the possible cause of failure and its recommended solution.
Thanks Peeks.

Deploying a New Forms .ear File in Oracle Applications Release 12-FATAL ERR

Hello everyone, I am applying a scurity patch 7605070 to our R12 applications. As part of the post-install step, I need to follow Metalink Note 397174.1 to deploy a new forms .ear file.
However, I am getting following FATAL ERROR:
:->$FND_TOP/bin/txkrun.pl -script=CfgOC4JApp
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK/txkCfgOC4JApp_Fri_May_29_11_54_43_2009.log
Program : /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl started @ Fri May 29 11:54:43 2009
*** Log File = /apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK/txkCfgOC4JApp_Fri_May_29_11_54_43_2009.log
Enter Application name for re-deployment ? forms
Enter Oc4j Instance password for re-deployment ? welcome
Run Autoconfig <Yes/No> ? no
Required values for starting OC4J instance "forms":
====================================================
s_formsstatus = enabled
s_forms_nprocs = 1 (value should be greater than 0)
Existing values from the context file:
======================================
s_formsstatus = enabled
s_forms_nprocs = 1
*** Values for context variables are VALID ***
Stopping all OPMN processes.
OPMN stopped.
Errors encountered running /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl
*******FATAL ERROR*******
PROGRAM : /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl(/apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/bin/txkrun.pl)
TIME : Fri May 29 11:55:09 2009
FUNCTION: TXK::Process::run [ Level 3 ]
MESSAGES:
Command error: <rc> = 32512, <command> = /apps/ecrmR12apps9/apps/tech_st/10.1.3/opmn/bin/opmnctl start
STACK TRACE
TXK::Error::abort('TXK::Error','HASH(0x99e2a24)') called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Common.pm line 299
TXK::Common::doError('TXK::Process=HASH(0xa662688)','Command error: <rc> = 32512, <command> = /apps/ecrmR12apps9/a...','undef') called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Common.pm line 314
TXK::Common::setError('TXK::Process=HASH(0xa662688)','Command error: <rc> = 32512, <command> = /apps/ecrmR12apps9/a...') called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Process.pm line 449
TXK::Process::run('TXK::Process=HASH(0xa662688)','HASH(0xa295488)') called at /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl line 1469
TXK::RunScript::execOPMNControl('HASH(0xa4f977c)') called at /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl line 532
require /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/RunScript.pm line 105
TXK::RunScript::require('TXK::RunScript','/apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin...') called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Script.pm line 177
eval {...} called at /apps/ecrmR12apps9/apps/apps_st/appl/au/12.0.0/perl/TXK/Script.pm line 177
TXK::Script::run('TXK::Script=HASH(0x9d974d4)','/apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK','/apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin...') called at /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/bin/txkrun.pl line 150
(lnxcde21-ecrmapps9) /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/bin
:->
What should I do? Please advice...

Issue appears to be resolved :)
Here are the steps:
vi /apps/ecrmR12apps9/apps/tech_st/10.1.3/opmn/bin/opmnctl and updated following variable to the correct path. (I am not sure why these path's were still pointing to production environment. I cross checked another cloned instance and it is also pointing to production path)
ORACLE_HOME=/apps/ecrmR12apps9/apps/tech_st/10.1.3; export ORACLE_HOME
TNS_ADMIN=${TNS_ADMIN="/apps/ecrmR12apps9/apps/tech_st/10.1.3/network/admin"}; export TNS_ADMIN
Then, the issue got resolved:
:->$FND_TOP/bin/txkrun.pl -script=CfgOC4JApp
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK/txkCfgOC4JApp_Fri_May_29_14_53_22_2009.log
Program : /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl started @ Fri May 29 14:53:22 2009
*** Log File = /apps/ecrmR12apps9/apps/crmcrm9_lnxcde21/logs/appl/rgf/TXK/txkCfgOC4JApp_Fri_May_29_14_53_22_2009.log
Enter Application name for re-deployment ? forms
Enter Oc4j Instance password for re-deployment ? welcome
Run Autoconfig <Yes/No> ? no
Required values for starting OC4J instance "forms":
====================================================
s_formsstatus = enabled
s_forms_nprocs = 1 (value should be greater than 0)
Existing values from the context file:
======================================
s_formsstatus = enabled
s_forms_nprocs = 1
*** Values for context variables are VALID ***
Stopping all OPMN processes.
OPMN stopped.
OPMN started.
Deplolying Application : "forms" onto OC4J instance: "forms"
Application deployed successfully.
Stopping and starting OC4J instances.
Started OC4J instances.
Binding webApp : "forms" with webmodule : "formsweb" for OC4J instance: "forms"
Web application bound successfully.
Stopping OPMN.
OPMN stopped.
Program : /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl completed @ Fri May 29 14:54:13 2009
End of /apps/ecrmR12apps9/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkCfgOC4JApp.pl : No Errors encountered
Now I am not sure if the changes I made to opmnctl file is correct or not. I mean can I vi this file and update the value in this file as I wish, or should I be following some procedure to update the correct path.

Oracle Applications Release 11.0 CD Pack for MS Windows NT

1. Can I install this on Windows 2000 server?
2. If yes, when I try to install, the one hour install pops an error showing, "One hour install requires that the TCPIP Domain name is set"
How do I fix this?
Please help
Regards
Madhu

Hi Nick!
There was a bug logged on this same issue Bug No. 2163235 from a customer.
Have you tried some of the following troubleshooting techniques:
1. After you've selected the set of books form from the menu, is the Applications processing anything or just no response? Any error message at the bottom of the left hand side corner of the screen at all?
2. Have you tried to regenerate the set of books form (GLXSTBKS.fmx)?
3. Can you open up any other setup form? Like the Journal Categories (Setup->Journals->Categories) or Journal Sources form (Setup->Journals->Sources)?
4. If there are no error messages at all and you are able to open up other forms in GL, and have already set up a calendar and chart of accounts to be used for a set of books, have you recompiled all invalid objects and regenerated the GLXSTBKS form as well as all forms via adadmin?
5. If you go to the directory $GL_TOP/forms/US/, does the file GLXSTBKS.fmx exists and has the correct permission (execute and read)?
6. What if you change to a different GL responsibility, such as General Ledger SuperUser? Does the set of books form come up?
7. Can you try using the Vision Demo database with the GL Super User responsibility? The form function should be assigned to the GL Concurrent Request data group. (From System Administrator Responsibility, open the Define Responsibilities form to see what data group is assigned to the GL responsibility).
--Theresa

Cloning Oracle Applications Release 11i

Similar Messages

Maybe you are looking for