Clueless as to whether I can do this or not in a program like Numbers

Before I begin - my disclaimer...
I have very little training in this area, and am completely clueless whether this can even be done.
I am trying to consider whether we will be able to create our own charting system in a medical clinic.  In beginning to play with the idea - the first thing that I need to find out would be does a database program like numbers have the ability to create full sentences from information in a give data field?  From there it becomes can you create a workflow that would take data from selected fields in a data base to populate a completed paragraph.
e.g. - based solely on how I would envision something like this to work (this is not based on anything concrete that I've seen in the past).
Data/Value in Cell A2 (from some sheet), would automatically populate the dot phrase in a partially pre-populated sentence.  So that if that data in the previous mentioned Cell A2 was "considerable pain" (let's say from a pop-up cell)... then... the following would be completed via automation.
The patient reported on intake today <value of A2:from some sheet> in the area of chief complaint.
So that maybe on another sheet the Sentence would read - "The patient reported on intake today considerable pain in the area of chief complaint."
Below is a sample from a form I've created that we use as a digital new patient intake form.  I'd like to know if we can create something along the lines of the above mentioned to create the paragraph following the screen capture below.  For illustration purpose, I've italicized the text in the full sentences with the data taken from each field of the chart.  Those fields in blue from the chart are cells whose format is pop-up.  The green text is data typed/dictation into the given cell.
The patient reported on intake today that the symptoms began while bending over to scratch an itch on her ankle.  The initial presentation was reported as immediate, with no changes since onset.  There have since been changes in the patient's breathing, with an increase in symptoms with coughing, and straining.
Again - I have no formal training in this other than creating the above mentioned chart.
Any help/suggestions would be greatly appreciated.

Hi L.T.D.,
To only answer the question you asked, the answer is yes you can do those specific tasks you mentioned.
My example:
Since you don't want the sentence if A2 is blank you would modify this formula to something like this:
=IF(ISBLANK(A2),"","the patient reports "&A2&" that won't leave.")
I don't see a problem if all you are looking to do is to translate your form or forms into a report. I could even see several different forms reporting to one sheet that tracks their history. It may require a lot of maintenance if there are an increasing number of forms reporting.
Sometimes merged cells create difficulty in Numbers. A mix of popups and checkboxes may complicate things.
I think the previous advice may turn out to be the best, though. You are asking,"If I head this way am I headed to Japan?" I am saying "Yes". They are saying, "You will need a boat!"
quinn

Similar Messages

  • HT201493 When trying to edit one of my "friends" on the Find Friends App. I noticed I can edit pics but not information, one of the numbers I have is wrong, it showed up when I added my daughter and it's not hers, I can't get rid of it to put hers in.

    Is there a way to edit numbers and addresses on Find Friends? I have been trying to fix a problem with my daughters iphone mobile number listed on my iphone. It brought up a number I believe she used for a social site but won't let me enter her actual mobile number. I contact her through her iphone using her phone number.

    If the phone is offline there is no way to track it or send a message to it.  You can place it in lost mode to lock it and send it a message (see http://help.apple.com/icloud/#/mmfc0f0165), but this will not take place until the phone goes back online, if it ever does.  If it does, you will get an email informing you.
    You might want to read this: http://support.apple.com/kb/HT5668.

  • BB10 browser - Hovering over Menu bar does not unfold items (Playbook can do this, but not Z30)

    Using the browser to access https://www.voip.ms/m/index.php
    On a Playbook, the menu items on the top bar unfold and allow user to select sub-menus. 
    On a Z30, nothing happens when hovering over the menu items.
    The BB10 touch browser seems to miss a pointer feature : browser doesn't recognize the hover option in the voip.ms menu.

    BB10 devices do not recognize the "hover" feature as you've described it, this is true. I don't have a PlayBook and cannot comment on any features available to it. However, you should be able to click for options where available. I know PC browsers have this feature but despite the BB10 browser being one of the most advanced mobile browsers, it does not incorporate this feature. All I can say is, if you can't do it on a BB10 browser, chances are you cannot do it on ANY other mobile browser.
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • I tried downlaoding itunes on my Windows Vista and after it completes, the icon doesn't appear on my desktop. The itunes setup can be found just not the actual program.

    I tried downloading itunes on my Windows Vista and after it completes, the icon doesn't appear on my desktop. When I search for the itunes under my programs, this is what shows: iTunes64Setup.

    It did prompt me to run it. I apologize. I said save.
    This is what happens, I run the iTunes64Setup, it downlods, says it has completed and then I click finish on the iTunes installer. After that, nothing comes up. Usually the program will start after it installs. There isn't an icon on my desktop either. When I go and search for iTunes under programs, only the iTunes64Setup appears. I am also having trouble downloading Adope Photoshop as well.

  • Can anyone suggest any Royalty Free music programs like Digital Juice?

    We use Digital Juice here at the office for music, graphics and Stock Footage, but I think I've used pretty much all of the "good" music tracks they have and was wondering if there are any other packages like Digital Juice out there that other people use.
    I'm basically just looking for something simple, where I don't have to create my own music, but that I can quickly sample the songs; like Juice lets you do.
    Thanks.

    As recommended above, SmartSound has two ways to use their music with most NLE's, including Premiere Pro. First, there is a free Premiere plug-in to access and use the music from within Premiere, Project Panel>New>Smartsound (once you install the plug-in). Or, you can do so much more with SonicFire Pro, but it is a standalone app. Marvelous how you can change the same piece of music with the Strata and BackStage (now being discontinued) series.
    Right now, they are having a sale on selected music disks. Go to www.smartsound.com and take a look. I *think* that they might have a few more sales over the next few weeks.
    I'm not sure that it's still going on, but SonicFire (not the full version) was also free with the purchase of any of the Strata Series disks. One can then upgrade to the full version.
    Basically, there are/were four levels of music:
    BackStage: (about the same as Strata Series, but greater bit-depth and sampling-rate, IIRC) - works beautifully in SFP.
    Strata Series: multi-level music @ 48KHz 16-bit - works beautifully in SFP.
    Regular disks: non-multi-level @ 22KHz & 44.1KHz - works in SFP, but does not support Mood Mapping (see the tutorial on their site)
    Compilations: non-multi-level @ 22KHz, and fewer variations than the regular disks. These are relatively inexpensive, but hard to locate on the site. There are/were some broad-ranging collections, so different ways to purchase these.
    Download: not a music type, per se, but one can purchase individual cuts from many of the SmartSound disks. Make sure that you do download all previews from SmartSound, so you can demo everything they offer.
    I will make that a third!
    Hunt

  • Can Quick Look but not open a PowerPoint file

    Someone sent me a power point file, and I can open it in Quick Look both in Apple Mail and in the Finder. However, Quick Look doesn't allow me to enlarge it big enough to make out the details or to print it. Text Edit won't open it. When I try to double-click the file, the finder displays the message:
    The document could not be opened. The file is not in the right format.
    I have no idea why Windows users blithely send people files like this in proprietary formats under the assumption that anyone and everyone will have no problem opening them. However, since Quick Look can view this, is there another default program on the Mac that can actually open it?

    OK, downloaded and installed NeoOffice, and it did indeed open and play the PowerPoint presentation--which, incidently, seemed to employ every single transition known to Microsoft, made me a bit queasy.
    As to why Windows users are so enamored with presentations, danged if I know. And why they have to email the things to everyone they know....well, it's a mystery.
    Anyway, you can get NeoOffice here:
    http://www.neooffice.org/
    It's open source, and thus has to be free. But if you actually end up using it very often, consider a donation.
    Francine
    Francine
    Schwieder

  • I'm investigating whether I can take on 'Lion' when it's released. The information states that your mac needs Intel Core 2 Duo. Is this the same as '2 GHz Intel Core Duo' which is what it actually states my mac has?

    I'm investigating whether I can take on 'Lion' when it's released. The information states that your mac needs 'Intel Core 2 Duo'. Is this the same as '2 GHz Intel Core Duo' which is what it actually states my mac has when I click 'About This Mac'?

    I could not agree more! My MBP 2007 Intel Core Duo has had its logic board replaced not to long ago (DVI port died). The original hard drive is running great and I am running Snow Leopard wonderfully.
    I was amped during the keynote and am really looking forward to Lion. I know the community is working hard to uncover a workaround because at present time, the solution (by new!) is not a worthy one. Especially when there is literally, nothing wrong with my existing machine.
    Apple, please ensure Lion will be available for Intel Core Duo machines, we are not that old! The closed architecture approach produces quality hardware. 4 years is a toddler perhaps teenager when it comes to apple hardware and technology. I predict I have at least 3-4 more years left in my current MBP 2007 machine.
    Much Love, Apple!

  • How I can solve this problem or manipulate it ports 80,443 are closed by ISP and they don't want to open it

    hi,
     I see that I have a particulier abonnee of my ISP , which has closed all the ports for security reason and they don't want to open  any of it 80,443 ect.
    suppose If I want to use Essential server 2012  how I can solve this problem , essential wants domain name whith A record.
    I asked DDNS service provider if I lease from them a domain name whith A record  would that help to open or manipulate the port 80,443  they said that I have to solve this problem myself . they lease only domain names with dynamic dns records.  
     so what can be a solution the ISP provider won't open this ports , how I can solve this problem .   domain name with ip adres is not helping so what it's go to help?
    thanks
    johan
    h.david

    The domain name in this instance is only used for remote access, and is seperate from the active directory domain name.
    If your ISP blocks port 80 and 443, and you dont intend to use remote access anyway, the wizard will likely not complete successfully whether you have a valid domain name or not.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • How I can change this query, so I can display the name and scores in one r

    How I can change this query, so I can add the ID from the table SPRIDEN
    as of now is giving me what I want:
    1,543     A05     24     A01     24     BAC     24     BAE     24     A02     20     BAM     20in one line but I would like to add the id and name that are stored in the table SPRIDEN
    SELECT sortest_pidm,
           max(decode(rn,1,sortest_tesc_code)) tesc_code1,
           max(decode(rn,1,score)) score1,
           max(decode(rn,2,sortest_tesc_code)) tesc_code2,
           max(decode(rn,2,score)) score2,
           max(decode(rn,3,sortest_tesc_code)) tesc_code3,
           max(decode(rn,3,score))  score3,
           max(decode(rn,4,sortest_tesc_code)) tesc_code4,
           max(decode(rn,4,score))  score4,
           max(decode(rn,5,sortest_tesc_code)) tesc_code5,
           max(decode(rn,5,score))  score5,
           max(decode(rn,6,sortest_tesc_code)) tesc_code6,
           max(decode(rn,6,score))  score6        
      FROM (select sortest_pidm,
                   sortest_tesc_code,
                   score,
                  row_number() over (partition by sortest_pidm order by score desc) rn
              FROM (select sortest_pidm,
                           sortest_tesc_code,
                           max(sortest_test_score) score
                      from sortest,SPRIDEN
                      where
                      SPRIDEN_pidm =SORTEST_PIDM
                    AND   sortest_tesc_code in ('A01','BAE','A02','BAM','A05','BAC')
                     and  sortest_pidm is not null 
                    GROUP BY sortest_pidm, sortest_tesc_code))
                    GROUP BY sortest_pidm;
                   

    Hi,
    That depends on whether spriden_pidm is unique, and on what you want for results.
    Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevamnt columns only) for all tables, and the results you want from that data.
    If you can illustrate your problem using commonly available tables (such as those in the scott or hr schemas) then you don't have to post any sample data; just post the results you want.
    Either way, explain how you get those results from that data.
    Always say which version of Oracle you're using.
    It looks like you're doing something similiar to the following.
    Using the emp and dept tables in the scott schema, produce one row of output per department showing the highest salary in each job, for a given set of jobs:
    DEPTNO DNAME          LOC           JOB_1   SAL_1 JOB_2   SAL_2 JOB_3   SAL_3
        20 RESEARCH       DALLAS        ANALYST  3000 MANAGER  2975 CLERK    1100
        10 ACCOUNTING     NEW YORK      MANAGER  2450 CLERK    1300
        30 SALES          CHICAGO       MANAGER  2850 CLERK     950On each row, the jobs are listed in order by the highest salary.
    This seems to be analagous to what you're doing. The roles played by sortest_pidm, sortest_tesc_code and sortest_test_score in your sortest table are played by deptno, job and sal in the emp table. The roles played by spriden_pidm, id and name in your spriden table are played by deptno, dname and loc in the dept table.
    It sounds like you already have something like the query below, that produces the correct output, except that it does not include the dname and loc columns from the dept table.
    SELECT    deptno
    ,       MAX (DECODE (rn, 1, job))     AS job_1
    ,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
    ,       MAX (DECODE (rn, 2, job))     AS job_2
    ,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
    ,       MAX (DECODE (rn, 3, job))     AS job_3
    ,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
    FROM       (
               SELECT    deptno
               ,          job
               ,          max_sal
               ,          ROW_NUMBER () OVER ( PARTITION BY  deptno
                                              ORDER BY          max_sal     DESC
                                )         AS rn
               FROM     (
                             SELECT    e.deptno
                       ,           e.job
                       ,           MAX (e.sal)     AS max_sal
                       FROM      scott.emp        e
                       ,           scott.dept   d
                       WHERE     e.deptno        = d.deptno
                       AND           e.job        IN ('ANALYST', 'CLERK', 'MANAGER')
                       GROUP BY  e.deptno
                       ,           e.job
    GROUP BY  deptno
    ;Since dept.deptno is unique, there will only be one dname and one loc for each deptno, so we can change the query by replacing "deptno" with "deptno, dname, loc" throughout the query (except in the join condition, of course):
    SELECT    deptno, dname, loc                    -- Changed
    ,       MAX (DECODE (rn, 1, job))     AS job_1
    ,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
    ,       MAX (DECODE (rn, 2, job))     AS job_2
    ,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
    ,       MAX (DECODE (rn, 3, job))     AS job_3
    ,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
    FROM       (
               SELECT    deptno, dname, loc          -- Changed
               ,          job
               ,          max_sal
               ,          ROW_NUMBER () OVER ( PARTITION BY  deptno      -- , dname, loc     -- Changed
                                              ORDER BY          max_sal      DESC
                                )         AS rn
               FROM     (
                             SELECT    e.deptno, d.dname, d.loc                    -- Changed
                       ,           e.job
                       ,           MAX (e.sal)     AS max_sal
                       FROM      scott.emp        e
                       ,           scott.dept   d
                       WHERE     e.deptno        = d.deptno
                       AND           e.job        IN ('ANALYST', 'CLERK', 'MANAGER')
                       GROUP BY  e.deptno, d.dname, d.loc                    -- Changed
                       ,           e.job
    GROUP BY  deptno, dname, loc                    -- Changed
    ;Actually, you can keep using just deptno in the analytic PARTITION BY clause. It might be a little more efficient to just use deptno, like I did above, but it won't change the results if you use all 3, if there is only 1 danme and 1 loc per deptno.
    By the way, you don't need so many sub-queries. You're using the inner sub-query to compute the MAX, and the outer sub-query to compute rn. Analytic functions are computed after aggregate fucntions, so you can do both in the same sub-query like this:
    SELECT    deptno, dname, loc
    ,       MAX (DECODE (rn, 1, job))     AS job_1
    ,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
    ,       MAX (DECODE (rn, 2, job))     AS job_2
    ,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
    ,       MAX (DECODE (rn, 3, job))     AS job_3
    ,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
    FROM       (
                   SELECT    e.deptno, d.dname, d.loc
              ,       e.job
              ,       MAX (e.sal)     AS max_sal
              ,       ROW_NUMBER () OVER ( PARTITION BY  e.deptno
                                           ORDER BY       MAX (sal)     DESC
                                          )       AS rn
              FROM      scott.emp    e
              ,       scott.dept   d
              WHERE     e.deptno        = d.deptno
              AND       e.job                IN ('ANALYST', 'CLERK', 'MANAGER')
                  GROUP BY  e.deptno, d.dname, d.loc
              ,       e.job
    GROUP BY  deptno, dname, loc
    ;This will work in Oracle 8.1 and up. In Oracle 11, however, it's better to use the SELECT ... PIVOT feature.

  • How can I fix the "This is not a test user account, please create a new account in the sandbox environment" error?

    Hi there everyone,
    Recently I tried to make an in-app purchase, I'm not sure whether the app is relevant or not but it was for Tapped Out, however, after trying to make the purchase I received an error message saying "Sign-In Required, tap continue to sign in to check for downloads [Environment: Sandbox]" so I followed the instructions and was then presented with another error message saying "This is not a test user account, please create a new account in the sandbox environment. [Environment: Sandbox]"
    I have been doing a lot of research online trying to find a solution and so far nothing has worked for me, I have also been passing emails backwards and forwards between an Apple Customer Support colleague and are yet to find a working solution.
    Here are a few pieces of information.
    1. I am running iOS 6.1.3 on a 4th Gen iPod, it's relatively new, I got it for Christmas.
    2. My iPod is not, and never has been Jail Broken.
    3. I do not have a test account and have never tried to make my own apps.
    4. I have tried signing out of my Apple ID, resetting my iPod's settings and signing in again.
    5. I have tried resetting my Apple ID password
    6. I have tried restoring my iPod to factory settings.
    If anyone has another suggestion for something I could try it would be greatly appreciated, thanks.

    Yep, I've been reading through other threads on lots of different sites over the last few hours and I can't seem to find a working solution, even though some seem to have worked for other people.
    Most of them hadn't been updated in a while so I made my own post to see if anyone has anything new.

  • If anybody can solve this, they win.

    I have a 15gb third generation (3g) ipod. Bought in April 2003, fully functional until about april 2006, at which point it stopped turning on all together.
    My thought? I made a homemade battery-pack out of an altoids tin, some batteries, and some soldering. It worked really well, providing the right amount of electricity and supplying juice for a good 8 hours---but I thought it may have fried the battery.
    So one day, my ipod stopped working. It wouldn't turn on, nothing. I gave up trying to revive it, and stuffed it away for a few months.
    But then, last week, I plugged it into my computer and it magically worked--not correctly, but it worked. I managed to download the updater and update the firmware--but then the ipod would only display the apple icon followed by the "connect to charge" icon before turning off.
    At the time, I had no idea what was wrong. So I plugged it into the computer, I reset it a thousand times, I went into diagnostic mode, I even opened it up and unplugged and replugged the battery. No dice.
    Later I found out here that a firmware update on a 3g must be completed by plugging the ipod into the AC charger. So I got mine back from my friend and did that, still no dice. Even left it charging for a good day and still nothing. Even bought a replacement battery (mine is getting old and unreliable anyway) and still no dice.
    Here's what I think happened: somewhere between unplugging the battery and resetting a million times, I disrupted the ipod's ability to finish the firmware update. So I'm unable to access anything--including diskmode--because the ipod simply won't run any firmware at all.
    So I'm stuck. Diagnostic mode tells me that everything is a go, but nothing is going anywhere. I'm unable even to get the ipod recognized by a computer in order to format it through windows---at best I can get a bubble to pop up on the computer saying "Device failure"
    If you could offer any help it would be greatly appreciated. Thanks for taking the time
    --David.
    Windows XP Pro
      Windows XP Pro  

    Hi
    First, try this
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    If does not work
    Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

  • I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.

    I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.
    Also, I had to install the software twice on my same computer before because I had to reboot the computer. I don't know if this affects the limit.

    You are allowed to have two activated installations so there should not be a problem having working installations on the two machines.  If by chance you have somehow tied up two activations for the one machine you can have Adobe support help resolve that thru chat.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I can't uninstall Thunderbird from my Windows Programs "uninstall list"; why does it not uninstall and be removed from this list?

    Very frustrating...under the Windows "Programs/Uninstall a program" list, Mozilla Thunderbird is still listed AFTER I have removed it completely (I thought) from my computer. I have clicked on "uninstall" several times and nothing happens. I resent the fact that Mozilla has set this up so that it apparently can't be removed from that list.. What's that all about? I have tried to research the problem, even using your website to no avail. All I want to do is get it out of my uninstall/change list. I have not used that program AND won't use it. I don't want that program on my computer/list period. I would appreciate your help.

    This is a fault with Windows application management. Mozilla does nothing to interfere with the install/uninstall process.
    You could re-install Thunderbird to re-synch the applications list and then un-install it again, or you could use a utility to remove it from the list.
    A search for ''thunderbird.exe'' will confirm whether or not it has been truly removed, though you may need to disable all the idiot-proofing that Microsoft implement to stop us seeing the true state of the file system; set it to show hidden files and file extensions for starters.
    Thunderbird is pretty much self-contained. You are free to manually remove the folder the application lives in if Windows is unable to uninstall it for you, though that won't fix the incorrect appearance of thunderbird in the list of installed applications.

  • I am considering the purchase of an iMac or macbook and want to know whether I can import my iTunes library of  400 albums from my Windows PC over my Home Network?  300 of these albums have been imported from CD's, so would not want to have to do that aga

    I am considering the purchase of an iMac or Macbook and want to know whether I can import my iTunes library of  +400 albums from my Windows PC over my Home Network?  300 of these albums have been imported from CD's, so would not want to have to do that again.

    Just copy the entire /Musci/iTunes/ folder from old computer to /Music/ on new computer.
    The libraries will be identical (date added, ratings, artwork, etc.).
    You can do this easily over the network.

  • Whether MRP can be carried out for work scheduling GR. 20 i.e. work to orde

    Dear Experts,
    Whether MRP can be carried out for work scheduling GR. 20 i.e. work to order.
    mahendra

    Hi MShirodkar,
    Yes, s and it specifies the time needed to process the material in the operations at the different work centers.
    The GR processing time depends on the order quantity.
    The GR processing time is required to calculate the lot size dependent in-house production time. The system then uses the in-house production time to determine the planned dates for planned orders in materials planning.
    You can define work scheduling times in the material master record in one of two ways.
    Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
    Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
    I hope it clears you doubt any queries please revert me back.
    Regards,
    Madhu.G

Maybe you are looking for

  • Apple TV sound bad when home sharing from Itunes

    Hello All, When I go through the Apple TV menus to Computers and choose my library to play my music it sounds really bad. Almost a "tinny" or metallic sound and the voices sound faded back. Not sure how to fix this or if this is the best way to play

  • How do I merge multiple Mailbox e-mails from different Macs in my house?

    The iSync does not quite fix what I'm seeking...a way to merge, not replace, all of my various e-mails that I send on different macs in my home. So, for instance, if I send an e-mail on one of them, I'd like to find that e-mail on my other two. Anybo

  • Error in Sun One AppServ 7 when debug app in Eclipse

    Hi, I'm using Sun One 7 App Server 7 - 2004Q2UR2 and Win 2000 pro. I'm starting my app in Debug mode, connecting the Eclipse 3.0.1 debug to the server and when running the app the server shutdown! someone give me a light! Tks

  • IPod Classic sorting TV episodes incorrectly???

    Hi, I have an iPod Classic that is listing TV episodes by release date insread of episode number. A Nano synced with the same content has arranged everything by episode number. Both iPod's are normally synced to indows computers, but the video conten

  • Fontpath???

    Hello! I am a student at an univercity in Sweden and using Solaris 5.8 on Ultra computers. I (obviously) don't have root access to the system. My problem is that I cannot add to the fontpath with "xset fp+ ~/fonts" command. I get the following error: