CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

HI,
We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems.  The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems.  However, when I try and run the following command
Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
"property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later.  The object's currant version is 0.0 <6.5.6500.0>"
What object is this reffered to?  Can anyone help please?
Thanks
Paul

Hi,
To set a default font for all users, you can use this command: -
Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
You can use any font style in place of “Trebuchet”.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S 
Ashish@V

Similar Messages

  • Set a default layout for all users via DIAPI

    Hello everyone,
    I am attempting to set a default report for all users/business partners using the DI-API. 
    I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
    If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
    Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
    (stripped down for clarity)
    Dim oDefaultReportParams As DefaultReportParams
    oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
    oDefaultReportParams.LayoutCode = sMyLayoutCode
    oDefaultReportParams.ReportCode = sMyReportCode
    Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
    Code executes fine, but it doesn't have the expected impact on settings.  The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
    I experimented by including and setting the following properties to every combination I could think of with the same results
            oDefaultReportParams.UserID = 'tried 1, 0, -1
            oDefaultReportParams.CardCode = 'tried "", "0", "-1"
    Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
    Thanks!

    Hi,
    Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
    Thanks.

  • How can we set Admin rights to access all user mailboxes in IMAP server exchange 2010?

    Hi,
    IMAP is in exchange 2010..
    as per guide:
    http://technet.microsoft.com/en-us/library/jj200730%28v=exchg.150%29.aspx
    CSV Files for IMAP Migration Batches`
    Use super-user or administrator credentials.   This requires that you use an account in your IMAP messaging system that has the necessary rights to access all user mailboxes.
    In the CSV file, you use the credentials for this account for each row. To learn whether your IMAP server supports this approach and how to enable it, see the documentation for your IMAP server.
    How can we set Admin rights to access all user mailboxes in IMAP server exchange 2010?
    thanks?

    Hi,
    Do you mean assigning a user full access permission to all other mailboxes? If so, we can try the following command:
    Get-Mailbox -Server “Exchange 2010” | Add-MailboxPermission -User AdminUserName -AccessRights FullAccess
    Thanks,
    Winnie Liang
    TechNet Community Support

  • How to set the default settings for all users in 11.1.1.3

    I have couple of questions
    1. How can I change the default setting for all the users so that whenever they log in the planning takes them to the Task lists mode. Or is this a one time thing which they need to do individually ?
    2. How can I set the defalut setting for all the users so that they can see the same page when they log into Workspace ?

    For workspace have a read of - http://docs.oracle.com/cd/E12825_01/epm.111/bpmui_admin/assigning_default_preferences.html
    For planning you can't really set it without hacking tables.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • HT2509 Can I set a default font to all my emails on iCloud?

    How do I set a default font for all my outgoing emails on iCloud?

    G'day 5508,
    Some thoughts. Try System settings first (this may not be the culprit).
    System Preferences > Language and Region > Advanced > Currency > Australian Dollar
    I can only adjust the currency cell by cell, column by column page by page.
    Forgive my stupidity, but if the currency is a cell format in the template, can you select all currency cells at once, then change the currency? You will have to do this separately for each Table, but within a Table, you can select a range of cells. Quicker than cell by cell.
    Once you have reformatted the document that emerged from that template, save the document as a template with the same name to overwrite the old template.
    Hope this helps, mate.
    Regards,
    Ian.

  • How do you set default programs for all users when deploying Windows 8.1?

    I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
    to be the default for opening pictures, videos, etc. Can that be done?

    Great question, this has been bugging me too!
    So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
    After filtering out the junk, I could see some *interesting* writes to the registry:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
    "Hash"="57y87/ogggU="
    "ProgId"="PhotoViewer.FileAssoc.Jpeg"
    But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers.  This is both good news and bad.
    Background:
    One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
    just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
       Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
    Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
    Solution:
    This blog appears to have the answer:
    http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
    New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
    was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
    From:
    <Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
    To:
    <Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
    I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
    perhaps seperate GPO's for Desktops/Laptops vs Tablets?
    -k
    Keith Garner - keithga.wordpress.com

  • Set default password for all users including csv file

    I would like to set the default password for all users
    including the ones imported in the csv file?
    Also now the default passwrd in set to the email address. How
    do i change that setting to the "login" setting in the csv file so
    those users can loin with that password?
    Kinda the same question but do yuo get the idea?
    Thank you,
    Chip

    You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
    http://www.rubicode.com/Software/RCDefaultApp/

  • How can i set a default font for premiere cs6

    I am hoping to find a way to set a default font for cs6.  I work for a company where i need to use Meta book. Every time I create a new title/text slide, i have to change the font to meta book.  is there a way to make meta book the font that always comes up(as a default) when i go to create a new title/text
    thanks for the help(if there is any)

    You set up your font in the Title Properties then go the panel (dropdown) menu of the Title Styles and select New Style.

  • Default Color, Size and Font for all user.

    Hi
    I have been looking around for the correct way to set some default styles for all Word users in a domain thrugh GPO. I just have some questions.
    So far i can only get it working if it set a "Workgroup templates path" under "User Configuration/Administrative Templates/Microsoft Office 2013/Shared paths". Then the users are able to select it when they say "New" - "Shared"
    and then the template
    But i would like it to be default for all users, like in the Normal.dotm. But without making a script to replace the file for every users APPDATA.
    Then i saw the "User Configuration/Administrative Templates/Microsoft Office 2013/Shared paths/Enterprise templates path", how and what does that do?

    Hi,
    As far as I know, if we want to distribute the Normal.dotm to users in a domain through GPO, we could
    use GPP file extension to
    distribute Normal.dotm to the path "C:\Documents and Settings\user name\Application Data\Microsoft\Templates." for every user. For more detailed steps, please refer to the following link:
    http://technet.microsoft.com/en-us/library/cc772536.aspx
    Similar issue:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/87ab10d3-1cb6-4269-9334-1e0c37527e0a/move-location-of-normaldotdotm-to-central-file-server-best-solution?forum=winserverGP
    If you want to config Enterprise templates path, please read this thread:
    https://social.technet.microsoft.com/Forums/office/en-US/c4e5c872-402c-4339-9c02-cfa91e949e41/office-2013-templates-group-policies?forum=officesetupdeploy
    If you have further question about the GPO, I recommend you post it to GPO forum:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
    Regards,
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

    We are currently looking to set the default preferences in the CMC for all of our users.
    I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
    The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
    I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
    Thank you

    I thought I could just run it too but when I attempt to I get a Windows Script Host error:
    Script: C:\User Prefs.vbs
    Line: 1
    Char: 1
    Error: Expected statement
    Code: 800A0400
    Source: Microsoft VBScript compilation error.
    I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong.  I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

  • Is it possible to mass change desktop wall paper for all users using WGM?

    is it possible to mass change desktop wall paper for all users using WGM?

    yes, it's easy - change a machine to the desktop you want (the image must be on all the machines, with the same name, of course), find ~/library/preferences/com.apple.desktop.plist Copy that to your server (or just put it on a flash drive) In workgroup manager select preferences - details - "add". Navigate to that plist. (Optional - hit "edit" and cut and past from "often" to "always", then the user cannot change the desktop at all, if you leave it in "often" it will reset next log-on.)

  • Set a default Font for a whole Swing application?

    Hi,
    Is it possible to set "Courier" as the default font for a whole swing application?
    I seem to have gotten lost here, could someone give me some pointers please?
    Thank You,
    -Uday

    So it needs to be done right at the beginningYes.
    Is there a code sample i can look at for reference and a standard way of doing this.I've seen examples posted in the forum the use the UIManager.getDefaults() method and then iterate through the defaults looking for all properties that end with ".font" and then replace the font as required.

  • Set default application for *all* users

    Hello people, my 1st post here, so forgive me for possible imprecisions, ambiguity, inappropriateness....
    When I search how to set/change the default app for opening some type of file I always find the answer "through the getinfo". But doing that, I only change the default application for the current user.
    I want to do that for all users of my mac, without repeating the getinfo process for each of them.
    Is there any adminstrative tools for doing that?
    Thank you.

    You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
    http://www.rubicode.com/Software/RCDefaultApp/

  • Setting the Default Homepage for all current and new users but leave it user modifiable.

    I am in the process of creating our new Windows Deployment Image based on Windows 7. Previously I was able to use the browserconfig.properties file in the Firefox main program files directory to change the default homepage for all new profiles while still allowing the user of any given profile to change their homepage. I have not yet found any equivilent in FireFox 4. Any help would be appreciated. Thanks.

    > The locations of the files are different and none of them show up under
    > the new user, but do show up for existing users.
    Enable logging for GPP files to see what's happening:
    http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Changing file clicking default behaviour for all users

    Is there a way to change the default file clicking behaviour for all users? Each user can do it himself by going via the username menu ("Personal Preferences", "When clicking on a file...") but I would prefer to set it for all users to a value that is different from the default.

    Hi Ganesh,
    Can u pl post how you solved this.
    Regards,
    Reema.

Maybe you are looking for