CME Live Recording Working but get a "Live Record has Stopped" message

Hi All,
I've configured Live Recording and its working perfectly.
However, when you press the LiveRcd button, you briefly get a message "Live Record has Stopped". (It does record the conversation and delivers it to my mailbox).
Is this normal?
Many thanks,
Ernesto
Cisco 2821 IOS 12.4(20)T
Cisco Unity Express 7.0.1

You might be hitting this bug:
CSCsq79034
Wrong Display while using LiveRcd softkey
Symptom:
If the call is active between phone A and phone B and phone A presses
the softkey LiveRcd , then the call is recorded however the display
says " Live Record has stopped" which is mis-leading to the users as
they feel the call is not recording but it actually is recording and
phone A gets a message after the call is disconnected.
Conditions:
its a cosmetic bug
Workaround:
Now if the call is active beween phone A and phone B and phone A presses
conference softkey and dials 9200 and presses conference softkey again ,
the call is recorded and phone A gets a message
HTH
java
if this helps, please rate

Similar Messages

  • TS3899 I currently have  live email account but after a few weeks it stops sending me a message to let me know I've got mail. Is there any way this can be sorted as I need notified of mail as it comes in through work. Thanks

    I currently have a live email account, but after a few weeks it stops notifying me that I've got mail. Is there anything I can do as I need notified of incoming mail for work at all times

    I copied text & paisted it and then draged the 3 photos from the file...then clicked on the photo then clicked the inline boxon tool bar nexed to floating one and that is how I did it
    I do not know what you mean "cut & paist"  how do I get the photo in from my picter folder if I do not drag it to the page in Pages? 
    I went to my photo folder and copied a photo and paisted the photo on the top left part of the page and it went there but there was no text to the right of photo...I could crop the photo to what ever size but no text to the right of photo...
    This is just too big of a mess of a program as it should be easier then this,,,I hav e 300 photos in this project and would have to re-paist them all...that is nuts...
    I see the button to the right of inline and floating that has 6 [lace to have the photo but the text does not float around the photo...
    If this is what your talking about this very little freedom in my page layout as I need it to let me place it where I need it to be and the wrap the text...
    There has to be an easier way to get my books ready for other formats other that Apple's iPad...iBooks Author was way eisier to make ready for iTunes...Love that program!!!
    Want my books for sale on all the other formats and was told by Apple Pages whould do it...
    I must be be out to lunch or the designers at Apple are ???

  • Motherboard went in my g5 desktop so i go my hard drive extracted with all my data..I now have an ibook g4 laptop and am trying to get gb working but get this message: he Instrument Library is invalid. GarageBand expects a valid Instrument Library folder?

    Motherboard went in my g5 desktop so i go my hard drive extracted with all my data..I now have an ibook g4 laptop running off OSX 10.4.11 and am trying to get Garageband working but get this message: The Instrument Library is invalid. GarageBand expects a valid Instrument Library folder?

    Contact Apple Support:
    http://www.apple.com/support/contact/
    Apple - How to Contact Us:
    http://www.apple.com/contact/
    Be sure to refer to the repair ticket number.
    Sounds like a terrible mixup.
    Good luck & happy computing!

  • After upgrading, I am getting the dreaded "iTunes has stopped working" message.  I've followed all of the troubleshooting tips on the forum without success.  Fortunately, it works on my other computers.  Running Win7 pro.

    After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch.  I've tried the troubleshooting tips on the Forum without success (though most are pretty old...).  Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep.  Anybody else with this issue??

    My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
    My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
    Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
    thanks!
    Kathi

  • My PC is communicating with my HP C309a wirelessly, but the Hp solution Center has stopped working.

    My PC (Dell XPS 9000) is communicating with my HP C309a wirelessly for printing, but the Hp solution Center has stopped working. Shouldn't I be able to use all functions wirelessly?
    I'm getting an error message "HP Solution Center cannot run because your device installation is not complete. Please plug in the usb cable or re-run the set-up program from the instattation CD for a network installation."  When I put the installation disk in to remedy the problem, it tells me that my present software is the latest so it won't update. When I go to the update center, it tells me I have the latest software.
    This question was solved.
    View Solution.

    Hi,
     Try  these:
     Click Start Menu icon>Programs>HP>HP Photosmart c309a>Add a Device
    With this, it will find the wireless printer and reconfigure the settings; simply follow the prompts. After completion, try to reopen HP Solution Center.
    Kiko

  • I purchased Creative Cloud through the Employee Purchase program. Had to reimage system. Need help reinstalling application. I have "redemption" code, but get error saying it has already been redeemed. Please advise.

    I purchased Creative Cloud through the Employee Purchase program. Had to reimage system. Need help reinstalling application. I have "redemption" code, but get error saying it has already been redeemed. Can you please advise how I go about getting my software reinstalled? If I was given the serial number when I redeemed, I don't have any record of it.
    Thank you,
    Starla

    Hi Starla Mehaffey,
    I would suggest you to sign in with your Adobe ID during installation and your product will automatically recognize your membership details.
    Refer this Link for any further assistance:- Redemption Code Help
    Hope that helps,
    Regards,
    Rahul Tyagi

  • I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

    I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

    Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

  • HT2305 when connecting to the itunes store i get a mess: (itunes has stopped working) all i can do is close the peogram. i was on the phoine with apple today over 2 hrs still cant fix it

    when connecting to the itunes store i get a mess: (itunes has stopped working) all i can do is close the peogram. i was on the phoine with apple today over 2 hrs still cant fix it. unistalled it 3x and in the proper order. reset all internet connection to default setting, turned off virus programs ect. Even the tech at apple by remote access couldnt fix it. use microsoft fix it also no good....\

    I am having the same problem now also. It happened after I updated my version. I have NEVER had this problem before as a windows user and have had iTunes for 5 years. So, I would have to say it is an Apple problem. I have not changed anything on my computer. I still have Internet Explorer and I have not even updated windows. The only thing I updated was iTunes. Now, I am not getting any response from Apple and if you call you have to pay for support. What a joke. An iPod costs $400 you would think that after paying that much you would at least get some type of help. This will now be the last time I ever by anything apple.

  • HT1926 I am getting an error - iTunes has stopped working.

    I am getting an error - iTunes has stopped working.
    This is happening in Win 7. It was working till yesterday Please help..

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • HT2311 I just installed 64 bit iTunes fon my new Dell Latitude PC. Everytime I try to open it I get an error "iTunes has stopped working..."

    I just installed 64 bit iTunes on my new Dell Latitude PC. Everytime I try to open it I get an error "iTunes has stopped working..."

    I requested this be relocated from iTunes for Mac to iTunes for Windows. You'll get a faster response on the correct forum.

  • I am trying to snyc my ipod and I keep getting an error: iTunes has stopped working.

    I am trying to snyc my ipod and I keep getting an error: iTunes has stopped working.  This following are the details of the error:
    Problemsignature:
      Problem Event Name:           APPCRASH
      Application Name:                iTunes.exe
      Application Version:             10.4.1.10
      Application Timestamp:        4e4e1904
      Fault Module Name:             iTunes.dll
      Fault Module Version:          10.4.1.10
      Fault Module Timestamp:     4e4e18db
      Exception Code:                   c0000005
      Exception Offset:                 001c5af0
      OS Version:                          6.1.7601.2.1.0.768.3
      Locale ID:                             1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    The ipod is updated except for the contacts.
    Any help is appreciated.
    thebiddy52

    Maybe:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

  • Keep getting error installation helper has stopped working for readstep2

    keep getting error installation helper has stopped working for readstep2

    attach a screenshot of that error message, FAQ: How do I capture and post a screen shot or... | Adobe Community

  • I installed Canon Pixma MG5520, since, always get "canon quick menu has stopped working" how do I fi

    I installed Canon Pixma MG5520 on win 7, since, always get "canon quick menu has stopped working" how do I fix please?

    Hi thaluza,
    We can see if there are files in a folder called TWAIN_32 other than those related to the printer that may be causing a conflict with the Quick Menu. If there are, we can temporarily remove the files to see if this will resolve the issue.
    To move the non-Canon Twain files from the Twain_32 folder, please follow these steps:
    1. Go to Computer / My Computer and locate the C: drive, then double-click on it to open.
    2. Locate the WINDOWS folder, then double-click to open it.
    3. Locate the TWAIN_32 folder, then double-click to open it.
    4. Inside of the TWAIN_32 folder, you will see a folder for your printer as well as a WIATWAIN.DS file. If there are other files in that folder, you will want to move them to another location, preferably your Desktop by doing the following:
        4-1. Click on each of the other items in the folder other than the the WIATWAIN.DS file and the folder for your printer to select them. You will want to hold the the CTRL key on your keyboard while selecting each of the items until all of the items except for the two referenced above are selected. Please be sure to leave the WIATWAIN.DS file and folder related to your printer inside of the TWAIN_32 folder.
        4-2. With all of the items you want to move selected, please go to the EDIT menu and select the CUT option.
        4-3. Go to your Desktop (main window that comes up when you start Windows with all of the icons on it) and right-click your mouse in any blank area, then choose the PASTE option. The items you selected from the TWAIN_32 folder should appear on the Desktop.
    5. Try to launch the Quick Menu again.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Why im i getting "an unknown error has occurred" message when i sign into the app store

    Im getting "an unknown error has occurred" message when i sign into the app store. I don't have a problem signing into anything else. What could the problem be?

    Were you able to find a solution to this issue? I am also getting the 'an error has occurred' message when trying to download or update any apps on my iPhone. Restarted, updated, re-booted, etc etc, nothing has worked.

  • My centre button has stopped working and my top lock button has stopped working too. I've had this iPhone 2 years now, can I take it into apple and swap for another phone or am I not covered? Thanks

    My centre button has stopped working and my top lock button has stopped working too. I've had this iPhone 2 years now, can I take it into apple and swap for another phone or am I not covered? Thanks

    The standard Apple warranty is 1 year. I believe you can purchase AppleCare+, which extends the warranty to two years from the date of purchase. This extended warranty needs to be purchased within 30 days of the purchase date for the phone.
    If you have the extended warranty, you may be able to get a replacement phone at no cost. You will need to make an appointment at an Apple Store Genuis Bar and have them take a look at the phone.
    If you did not purchase the additional warranty coverage, you should be able to purchase an Out-of-Warranty replacement, which is $199 for the iPhone 4S.
    ~Lyssa

Maybe you are looking for