CMS Import error: archive not found

Hi experts,
trying to import components under Consolidation tab in CMS I get this error:
Feb 7, 2011 4:12:26 PM Error : error during loading of propagation request Exc=com.sap.cms.tcs.interfaces.exceptions.TCSFileNotFoundException: archive not found: D:\usr\sap\trans\EPS\in
\CMStarvosNWD/CMS/archives/sap.comSAP-SHRWEBNWD_EAMM1DEV_D~6 / D:\usr\sap\trans\EPS\in\CMStarvosNWD/CMS/archives/sap.com#SAP-SHRWEB#NWD_EAMM1DEV_D#6
archive not found: CMS/archives/sap.comSAP-SHRWEBNWD_EAMM1DEV_D~6
Unfortunately all the *.pra files were deleted under CMS\archives.
Ho can I restore these archives?? Or what can I do? What are the *.pra achives for?
Best Regards
Mirko

Hi Mirko,
I think the error comes not due to the pra files, but due to the missing sca files. Can you please try to recreate them in the way we have discussed? Assembly always takes the changes from cons/active, there's no way to change on this behaviour, i.e. there's nothing to be configured thisregarding. After import into cons a force activation takes place (i.e. in cons there's no need to do an explicit activation, the changes gets reflected after import automatically into cons/inactive as well as in cons/active)
Best Regards,
Ervin

Similar Messages

CMS archive not found

we deleted some old Archives from the JTrans folder...
now we cant seem to activate anything.... & sap asked us to change the DTR & CBS url's.. we cannot do it .. we get the following errors..
1. Cannot find software component release (Vendor/Name/Release sap.com/CUSTCRMPRJ/5.0) in CMS. UpdateCMS Server or/and check SLD component content.
2. Component (Vendor/Name: sap.com/CUSTCRMPRJ) changed in SLD Server
and when i try to re-import we get the following error...
Feb 7, 2008 1:03:05 PM Error : error during loading of propagation request Exc=com.sap.cms.tcs.interfaces.exceptions.TCSFileNotFoundException: archive not found: F:\usr\sap\JTrans/CMS/archives/sap.comCUSTCRMPRJNJ7_ECO1.2X_C~20070807102054 / F:\usr\sap\JTrans/CMS/archives/sap.com#CUSTCRMPRJ#NJ7_ECO1.2X_C#20070807102054
Feb 7, 2008 1:03:05 PM Error : stack trace:
[EXCEPTION]*
this is one of the files we deleted..... we have the latest files.. but not the old ones... how can we fix it. ???

Hi,
You get this error
1. Cannot find software component release (Vendor/Name/Release sap.com/CUSTCRMPRJ/5.0) in CMS when the SC sap.com/CUSTCRMPRJ/5.0 is not available in the SLD. If you are sure you do not need this SC then you can just delete this from the CMS track definition and then try to save the track with new CBS, DTR URL(which was what you were trying to)
Incase the SC is needed then create the SC definition update your CMS cache and then try to save the track as it is,(with the new CBS,DTR URL)
Akshatha

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

Error:Can not found "javax/xml/soap"

Hi:
I'm fairly new to Java development and I'm trying to write a wrapper class that will access a webservice. The problem I'm running into is that I keep getting this error message when I try to compile my class:
./STest.java:1: error:Can not found "javax/xml/soap" [JLS 7.5.2, 7.6]
I've installed the jwsdb-1_2 and I think mh env is set up correctly.
The above error message is generated by:
import javax.xml.soap.*;
Please help!

I've searched every jar file and it doesn't seem as though any of them have the soap stuff....
This page, http://java.sun.com/webservices/docs/1.0/api/overview-summary.html, seems to say that I need the Web Services Developer Pack, which is was the wsdp is....

Proxy Generation internal error object not found.

Hi
We have BW-XI implementation .Recently an error has started popping up , while the checking the proxy in tcode sproxy.
Error is - Proxy generation internal error , <message> not found, check failed . However when I double click on the proxy and do a check its fine and we are able to load data in BW successfully .
Does any one have a clue on this and how important is this check on the first screen of sproxy ? Thanks in advance .

Hi......Kapil,
proxy's mainly based on msg interfaces.with out creating msg interface we can't do proxies.For this logon to IR & create data & msg types & then msg interfaces.
after complition of this process.Under proxy generation screen u can see the following details .......
Ur data type,msg type,& ur interface...
regards,
Naresh.K

Error - Table not found

Hi Guys,
Error - TABLLE NOT FOUND
We are working on discovery server which comes preconfigured from SAP.
I am able to work on the standard repositories like products available on this server for syndication and importing, but when I am trying to create the new repository I am getting the error TABLE NOT FOUND. Getting this error after entering the DBMS Server, Login Details and Repository Name and Port details.
Thanks,
MS

Hi colleagues
You should check follow:
- DBMS-user can connect to DBMS from your workstation(where you run SAP MDM Console)
- DBMS-user has premissions(grants) according to "installation guide".
- restart SAP MDM Server
- update DBMS Settings
- create new repository
Regards
Kanstantsin

ImportTextData fails with an error: row not found

In am using Acrobat XI. In a js script in an action wizard the statement this.importTextData("mypath", 0) continues to return a 3 "error: row not found". I have checked the path and it is correct. The text file was created by Access 2013 and is tab delimitated. What am I doing wrong? The top row in the txt file is the column names and there are 3 rows of data.

What happens when you try to import from the data file manually?
If you have a field named "A.0" as you said, you have to have a matching column header, but you said you just have "A", "B", and "C".

"Error: NameValue not found"

Hi,
I am having a problem where I have been asked to modify an application. And I am unable to compile. I am using JDev 10.1.3 and I am getting the following error.
"Error: NameValue not found"
This is the whole error code.
I have looked through the .sjp for clues and the only item that looks like it might use NameValue is the code:
NameValue[] linkParams = new NameValue[pHmParam.size()];
So I googled NameValue and the only api I could find was this:
http://openi.sourceforge.net/docs/api/org/openi/util/NameValue.html
This website says that the "org.openi.util.NameValue" is part of "java.lang.Object" and as I understand java.lang is automatically imported to all java projects. So shouldn't the NameValue class be imported automatically too.
Does anyone know why I might be getting this error?

What that link says is that NameValue extends java.lang.Object, not is "a part of."
If that is in fact the NameValue, then you need the OpenI libraries (of which that NameValue you linked is a part): http://openi.org/
there is also a NameValue class in Apache Jackrabbit... Have a look at the imports in your Java class/jsp for some clues as to what it is, I guess.
John

[SOLVED] pacman error: database not found (during an install)

i am trying to install an app
when installing
# pacman -S /path/to/dir/app.tar.gz
error: database not found
when i look inside the tar, theres only one file, app.bin
im sure its some fundamental that im missing. so i have to makepkg first , or am i missing a command during the intallation, or is the file broken?
Last edited by wolfdogg (2011-06-04 05:50:09)

well, im geting some errors with the program, im wondering if i need to make a package? i think i will try that next.
heres the beginning of the log, Java errors mainly
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86
!ENTRY org.eclipse.equinox.ds
!MESSAGE
!STACK 0
org.osgi.framework.BundleException: The bundle could not be resolved. Reason: Missing Constraint: Import-Package: org.eclipse.equinox.internal.util.event; version="1.0.0"
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolverError(AbstractBundle.java:1313)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolutionFailureException(AbstractBundle.java:1297)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:309)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:370)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1068)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:557)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:464)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:248)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:445)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:227)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:337)
ok, i downloaded a different binary of this program, and it installed successfully. thanks for the help
Last edited by wolfdogg (2011-06-04 05:49:37)

Could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).

Hi
I am getting this error when trying to start a VM in a Windows 2008 R2 Hyper-V ( all updated applied )
'vm-xx' could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).
Does anyone experienced this error?
I found one update, KB967902 but it is for Windows 2008 Hyper-V not for R2
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.com

Hello
Alessandro,
I wrote about this error in the following KB and blog post.
Please let me know if they are helpful.
Error 2912 when a Virtual Machine Manager 2008 operation fails due to a certificate issue: "Element not found (0x80070490)"
http://support.microsoft.com/kb/971264
http://blogs.technet.com/b/mbriggs/archive/2009/05/08/vmm-operation-fails-with-error-2912-0x80070490-due-to-a-certificate-issue.aspx
Best Regards, Mike Briggs [MSFT]
– Posting is provided "AS IS" with no warranties, and confers no rights

DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)

Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
<Location /pls/jd-download-dev>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername w_web_user_download
PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
PlsqlDatabaseConnectString jddev TNSFormat
PlsqlNLSLanguage German_Germany.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDefaultPage w_anwendung.p_web_show_document
PlsqlAlwaysDescribeProcedure Off
PlsqlErrorStyle DebugStyle
</Location>
The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
Our Test-Application generates the following link
'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
Thank you in advance for your help
Udo

Hi Raj,
it is a Sparc Solaris 10
and yes that's my enviorment.
After some more tests it's seems it's not a real bug but no realy nice working solution.
Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
After deleting the complete secure storage and test it again with the juno version it works well.

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

Error File not Found in CS 5.5

When I go to open up PP CS 5.5 it provides a list of possible projects I can open up. Click on a project and it opens accordingly. However, over the past 2 days it has become problematic. I can click on the listed project but I now receive an error message: Error file not found. PP will not open up. I haven't moved any files, folders or projects around. I have simply closed the project, quit PP and then opened it again when wanting to edit. I have tried opening up the auto saved project file and I receive the same message?

Hi Todd both your solutions (and the one suggested by Colin) works initially. Dbl click the project file and it opens PPro. However, I tried this on another project which has a 3rd party pllugin (Smartsound Sonic Fire Pro) in it. Things get interesting with Smartsound being activated with me unable to quit out of it and I am not able to access Premier Pro. I have to Force Quit both programs. Then when I try to dbl click on the program that opened up OK the error message returns: File format not supported. There is no Smartsound file involved in this project? Same thread? New thread? many thanks for your responses

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Error: file not found

Hello,
I am using a labview program which already exists. The program
inputs a file ( txt file with some numerical data) and gives the output
file at the required location after performing some calculations to it.
The problem is when I input my file path and run the program it always
gives an error ' file not found'. Please help me.
Thanks
Laxmikanth

Hi Laxmikanth,
Some more info would be helpful. Such as posting a image of your program, which version of labview, platform etc.
that being said if you are literally typing in the filepath that is the most likely source for the error. Is there a browse button visible to the right of the filepath control? If not try right clicking and under the visible menu make sure the browse button is selected. Then click on the browse button and find/select your disk file. Now run the program and see if you get the same error.
Cheers,
--Russ

CMS Import error: archive not found

Similar Messages

Maybe you are looking for