Code: 0xC0208452 Source: Data Flow Task ADO NET Destination [86] Description: ADO NET Destination has failed to acquire the connection {}. The connection may have been corrupted.

Hi There!
I have created one package (1) to import data from Flatfile(csv), (2)Clean It  then (3)send clean rows to SQL Database.
This package was working fine before. Since I have decided to deploy this package to automate this process, I have no clue what went wrong but this doesn't run anymore. Flatfile and Database are on same windows box. We are running SQL 2008.I
have attached some screenshot to make this conversation more concise.
Your time and efforts will be appreciated!
Thanks,
DAP

Hi Niraj!
I recreated connection and I was able to remove that RED DOT next to those connections.
Still package doesnt run well :(
I have only one server. I use same server through out the process. I ran that process as job through SSMS and attached is output file(if this explains more)...
Microsoft (R) SQL Server Execute Package Utility
Version 10.0.4000.0 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started:  11:34:38 AM
Error: 2014-07-18 11:34:39.33
   Code: 0xC0208452
   Source: Data Flow Task ADO NET Destination [86]
   Description: ADO NET Destination has failed to acquire the connection {2430******}. The connection may have been corrupted.
End Error
Error: 2014-07-18 11:34:39.33
   Code: 0xC0047017
   Source: Data Flow Task SSIS.Pipeline
   Description: component "ADO NET Destination" (86) failed validation and returned error code 0xC0208452.
End Error
Error: 2014-07-18 11:34:39.33
   Code: 0xC004700C
   Source: Data Flow Task SSIS.Pipeline
   Description: One or more component failed validation.
End Error
Error: 2014-07-18 11:34:39.33
   Code: 0xC0024107
   Source: Data Flow Task 
   Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_SUCCESS (0).
Started:  11:34:38 AM
Finished: 11:34:39 AM
Elapsed:  0.531 seconds
Thanks for your time and efforts!
DAP

Similar Messages

  • HT1338 I am having trouble installing updates on my mac this is the error code the pops upThe update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that

    can some one help me? I have been trying to update my MAC and it will not download because this message come up
    (The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.)

    For anyone that comes across this. I managed to fix the problem. It had something to do with the date on my computer. Mavericks installer apparently does a date check of some sort and that is where the error is coming from. Open terminal and check the system date. It may be wrong. Another poster in the forums told me how to to check the date and change it. Click here for the link to the explanation. Be careful because the date is in a weird format.

  • Error on Data Flow Task MSSQL 2012 Clustered "Description: The version of Lookup is not compatible with this version of the DataFlow. "

    We have an SSIS package that runs on clustered MSSQL 2012 Enterprise Nodes that is failing.  We use a job to executer the package.
    Environmental information:
    Product - Microsoft SQL Server Enterprise: Core-based Licensing (64-bit)
    Operating System - Microsoft Windows NT 6.1 (7601)
    Patform - NT x64
    Version - MSSQL Version 11.0.3349.0
    Package is set to 32 -bit.  All permissions verified.  Runs in lower environments, same MSSQL version.  All environments are clustered.  In the failing environment, all nodes are at the same service pack.  I have not verified if all
    nodes in the failing environment have SSIS installed.  Data access is installed.  We have other simpler packages that run in this environment, just not this one.  Time to ask the community for help!
    Error:
    Source: Data Flow Task - Data Flow Task (SSIS.Pipeline)     Description: The version of Lookup is not compatible with this version of the DataFlow.  End Error  Error:  Code: 0xC0048020    
    Description: Component "Conditional Split, clsid {7F88F654-4E20-4D14-84F4-AF9C925D3087}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.  End Error 
    Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Conditional Split;Microsoft Corporation; Microsoft SQL Server; (C) Microsoft Corporation; All Rights
    Reserved; http://www.microsoft.com/sql/support;0".  End Error 
    (Left out shop specific information.  This is the first error in the errors returns by the job history for this package. )
    Thanks in advance.

    Hi DeveloperMax,
    According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
    As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
    only in 32-bit versions, so the job failed.
    To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
    select “32 bit runtime” in the Advanced tab.
    Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How can I create a template of a Data Flow Task in SSDT?

    The majority of the Data Flow Tasks that I build have the same five elements in them (OLE DB Source, Conditional Split, Derived Column, Data Conversion, and OLE DB Destination).  I'd love to have a template of a Data Flow Task which already contains
    these elements.  Is that possible for me to create, and how do I do it?
    I'm currently on SSDT 11.1, with Visual Studio Pro 2012.

    Hi Tim_Dorenkamp,
    If I understand correctly, you want to create a custom task, then add it as template of a Data Flow Task in SSIS Toolbox. So that you can use it in every packages.
    Just as Samir suggested, we can developing a Custom Task that create a class that inherits from the Task base class, apply the DtsTaskAttribute attribute to your new class, and override the important methods and properties of the base class, including the
    Execute method. The sample of create a custom task is for your reference:
    http://microsoft-ssis.blogspot.com/2013/06/create-your-own-custom-task.html
    Besides, as to your requirement, we can simply create a template package that including this Data Flow Task, then use this template to create new packages. If we want to use the Data Flow Task in an existing package, we can add a new package with the template,
    then copy the Data Flow Task from the new package and paste it to the existing package. For more details about create a template package in SSIS, please refer to the following thread:
    https://social.technet.microsoft.com/Forums/en-US/b0747467-daff-4fc8-9f81-20d68b38e5ee/change-default-for-package-protection-level?forum=sqlintegratio
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Read from sql task and send to data flow task - [OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.

    I have created a execut sql task -
    In that, i have a created a 'empidvar' variable of string type and put sqlstatement = 'select distinct empid from emp'
    Resultset=resultname=0 and variablename=empidvar
    I have added data flow task of ole db type and I put this sql statement under sql command - exec emp_sp @empidvar=?
    I am getting an error.
    [OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
    [SSIS.Pipeline] Error: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC02092B4.

    shouldnt setting be Result
    Set=Full Resultset as your query returns a resultset? also i think variable to be mapped should be of object type.
    Then for data flow task also you need to put it inside a ForEachLoop based on ADO.NET recordset and map your earlier variable inside it so as to iterate for every value the sql task returns.
    Also if using SP in oledb source make sure you read this
    http://consultingblogs.emc.com/jamiethomson/archive/2006/12/20/SSIS_3A00_-Using-stored-procedures-inside-an-OLE-DB-Source-component.aspx
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • "Syntax error or access violation" on Data Flow Task OLE DB Data Source

    I am implementing expression parameter for a SQL Server connection string (like this: http://danajaatcse.wordpress.com/2010/05/20/using-an-xml-configuration-file-and-expressions-in-an-ssis-package/)  and it works fine except when it reaches data flow
    task - OLE DB Source task. In this task, I execute a stored procedure like this: 
    exec SelectFromTableA ?,?,?
    The error message is this:
    0xC0202009 at Data Flow Task, OLE DB Source [2]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft OLE DB Provider for SQL Server"  Hresult: 0x80004005  Description: "Syntax error or access violation".
    Error: 0xC004706B at Data Flow Task, SSIS.Pipeline: "OLE DB Source" failed validation and returned validation status "VS_ISBROKEN"
    When I change the SQL command above with reading from table directly it works fine. I should also add that before changing connection string of the SQL data source to use expression, the SSIS package was working fine and I know that the connection string
    is fine because other tasks in the package works fine!
    Any idea why?

    Hi AL.M,
    As per my understanding, I think this problem is due to the mismatching between the source and the destination tables. We can reconfigured every of components of the package to check the table schemas and configuration settings, close the BIDS/SSDT and then
    open and try to see if there are errors.
    Besides, to trouble shoot this issue, we can use the variable window to see the variable's value. For more details, please refer to the following blog:
    http://consultingblogs.emc.com/jamiethomson/archive/2005/12/05/2462.aspx
    The following blog about “SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred: Reasons and troubleshooting” is for your reference:
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/11/10/ssis-error-code-dts-e-oledberror-an-ole-db-error-has-occurred-reasons-and-troubleshooting.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error o

    When I was Importing data from XML to SqlServer using SSIS , I am getting this error. The import is working if i use small file and not working if I use large XMl file. Can any one of you guys help me out with the issue?
    Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
    Error: 0xC02092AF at Data Flow Task, XML Source [24515]: The component "XML Source" (24515) was unable to process the XML data. Pipeline component has returned HRESULT error code 0xC020902A from a method call.
    Error: 0xC0047038 at Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on component "XML Source" (24515) returned error code 0xC02092AF.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED.  Thread "SourceThread0" has exited with error code 0xC0047038.  There may be error messages posted before this with more information on why the thread has exited.
    Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED.  Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.  There may be error messages posted before this with more information on why the thread was cancelled.
    Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED.  Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.  There may be error messages posted before this with more information on why the thread was cancelled.
    Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED.  Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.  There may be error messages posted before this with more information on why the thread was cancelled.
    Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED.  Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.  There may be error messages posted before this with more information on why the thread was cancelled.
    Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED.  Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.  There may be error messages posted before this with more information on why the thread was cancelled.
    Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED.  Thread "WorkThread0" has exited with error code 0xC0047039.  There may be error messages posted before this with more information on why the thread has exited.
    Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED.  Thread "WorkThread1" has exited with error code 0xC0047039.  There may be error messages posted before this with more information on why the thread has exited.
    Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED.  Thread "WorkThread2" has exited with error code 0xC0047039.  There may be error messages posted before this with more information on why the thread has exited.
    Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED.  Thread "WorkThread3" has exited with error code 0xC0047039.  There may be error messages posted before this with more information on why the thread has exited.
    Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED.  Thread "WorkThread4" has exited with error code 0xC0047039.  There may be error messages posted before this with more information on why the thread has exited.

    The reason is in the first line of the error.  It doesn't have anything to do with the size of your XML file - it has to do with the contents of the "MsgLev1" column.  You (or the XSD) has indicated that the values in this column not exceed a certain size - but one of the values in the file that's failing is larger than that.
    In order to fix the problem, you're going to need to increase the allocated space for that column.  In order to do that, you're going to need to find out what the required size of that data is - either from someone who ought to know, or by direct examination of the file.  If you want to know which entity has this overly large data element in it, you need to configure the error handling of the XML Source to "redirect truncation errors".  Then you can hook up the XML Source's error output to another destination where you can see which rows are problematic.
    Talk to me on

  • Building a data flow task, within a foreach loop for dynamic table name, but ole db source not allowing variable

    In my control flow, I set up a variable for the table name, enumerated by SMO, following the instructions from the link here:
    http://www.bidn.com/blogs/mikedavis/ssis/156/using-a-for-each-loop-on-tables-ssis
    Now, I put a data flow task inside the foreach. I selected the OLE DB connection manger for my database, set the Data access mode to "Table name or view name variable", and selected my variable name from the drop down. So far so good. When I click on OK,
    it gives me an error 0x80040E37, basically saying it can't open the rowset for "my variable", Check that the object exists in the database.
    So, I assume I won't be able to do this "that' easily, and I will need to build a "SQL command from variable" or some such thing. Any advice on how to build this Source editor to dynamically name my columns from the variable?
    Thanks in advance!
    mpleaf

    Hi mpleaf,
    Please try to set "ValidateExternalData" to False in your OLE DB Source Properties and "DelayValidation" property to TRUE, please refer to similar threads:
    http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/620557d9-41bc-4a40-86d5-0a8d2f910d8c/
    http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/456f2201-447c-41b3-bf27-b3ba47e6b737
    Thanks,
    Eileen
    Eileen Zhao
    TechNet Community Support

  • Unable preview the data of oracle source in Data flow task in SSIS

    I am working on a SSIS package DATA FLOW TASK to get the data from Oracle Source.My oracle source query is as belows
    select Employees from EmployeDW WHERE StartDate =('15-MAY-14')
    There is no error in execution of package but there is no data in Destination table.When i am PREVIEW the data source i dont find any data but when i executed above query in Oracle i am getting the values.Do i need to make any chages in oracle data source Side.
    Can you guys help me please.

    What is the source connectoin used and its configuration? Can you please share the screenshots? That will help.
    Happy to help! Thanks. Regards and good Wishes, Deepak. http://deepaksqlmsbusinessintelligence.blogspot.com/

  • Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command." error

    I have an .XLSX File that I am trying to Upload into SQL Server.  I use the Source as OLEDB Connection manager and pick OLDEB PROVIDER as MS OFFICE 12.0 ACCESS DATABASE ENGINE. In that I put this query but it gives the foll
    error when I run the SSIS Package.
    [OLE DB Source [1]] Error: No column information was returned by the SQL command.
    Query I use in DATA FLOW TASK  , IS SQL COMMAND:
    Select top 1 [Investor #],[Investor Name], CONVERT (VARCHAR(1000),Delegation)AS DELEGATION ,[Date Added],[Date Revised] from [EXCELSHEET1$]
    Any suggestion to fix this error? i have to do a convert since the excel datayype is DT_TEXT AND SQL TABLE DATATYPE is VARCHAR(1000)  SO Have to do this Convert.

    If the target table's column is not a BLOB/CLOB (e.g. NVARCHAR(MAX)) and you have text longer than the max value it will not fit into the target, if you are allowed you need to trim it and convert, otherwise sure you get the error as the target datatype
    is smaller. 
    Arthur My Blog

  • Need help ASAP with Data Flow Task Flat File Connection

    Hey there,
    I have a Data Flow Task within a ForEach loop container.  The source of the flow is ADO.NET connection and the destination is a Flat File Connection.  I loop through a collection of strings in the ForEach loop.  Based on the string content,
    I write some data to the same destination file in each iteration overwriting the previous version. 
    I am running into following Errors:
    [Flat File Destination [38]] Warning: The process cannot access the file because it is being used by another process.
    [Flat File Destination [38]] Error: Cannot open the datafile "Example.csv".
    [SSIS.Pipeline] Error: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.
    I know what's happening but I don't know how to fix it.  The first time through the ForEach loop, the destination file is updated.  The second time is when this error pops up.  I think it's because the first iteration is not closing the destination
    file. How do I force a close of the file within Data Flow task or through a subsequent Script Task.
    This works within a SQL 2008 package on one server but not within SQL 2012 package on a different server.
    Any help is greatly appreciated.
    Thanks! 

    Thanks for the response Narsimha.  What do you mean by FELC? 
    First time poster - what is the best way to show the package here?

  • SQL Query using a Variable in Data Flow Task

    I have a Data Flow task that I created. THe source query is in this file "LPSreason.sql" and is stored in a shared drive such as
    \\servername\scripts\LPSreason.sql
    How can I use this .sql file as a SOURCE in my Data Flow task? I guess I can use SQL Command as Access Mode. But not sure how to do that?

    Hi Desigal59,
    You can use a Flat File Source adapter to get the query statement from the .sql file. When creating the Flat File Connection Manager, set the Row delimiter to a character that won’t be in the SQL statement such as “Vertical Bar {|}”. In this way, the Flat
    File Source outputs only one row with one column. If necessary, you can set the data type of the column from DT_STR to DT_TEXT so that the Flat File Source can handle SQL statement which has more than 8000 characters.
    After that, connect the Flat File Source to a Recordset Destination, so that we store the column to a SSIS object variable (supposing the variable name is varQuery).
    In the Control Flow, we can use one of the following two methods to pass the value of the Object type variable varQuery to a String type variable QueryStr which can be used in an OLE DB Source directly.
    Method 1: via Script Task
    Add a Script Task under the Data Flow Task and connect them.
    Add User::varQuery as ReadOnlyVariables, User::QueryStr as ReadWriteVariables
    Edit the script as follows:
    public void Main()
    // TODO: Add your code here
    System.Data.OleDb.OleDbDataAdapter da = new System.Data.OleDb.OleDbDataAdapter();
    DataTable dt = new DataTable();
    da.Fill(dt, Dts.Variables["User::varQuery"].Value);
    Dts.Variables["QueryStr2"].Value = dt.Rows[0].ItemArray[0];
    Dts.TaskResult = (int)ScriptResults.Success;
    4. Add another Data Folw Task under the Script Task, and join them. In the Data Flow Task, add an OLE DB Source, set its Data access mode to “SQL command from variable”, and select the variable User::QueryStr.
    Method 2: via Foreach Loop Container
    Add a Foreach Loop Container under the Data Flow Task, and join them.
    Set the enumerator of the Foreach Loop Container to Foreach ADO Enumerator, and select the ADO object source variable as User::varQuery.
    In the Variable Mappings tab, map the collection value of the Script Task to User::QueryStr, and Index to 0.
    Inside the Foreach Loop Container, add a Data Flow Task like step 4 in method 1.
    Regards,
    Mike Yin
    TechNet Community Support

  • Cannot change SQL command text in Data Flow Task

    I have an SSIS package that extracts data from Teradata into a SQL Server DB.
    I'm using SQL Server 2008 R2 EE x64, and Visual Studio 2008 PE (BIDS) supplied with it, accessing Teradata v13.
    In the Integration Services project, I have a Data Flow Task, it has an ADO .net source which has Data access mode set to “SQL Command”.
    This worked for a while when I initially entered a SQL statement to select data.
    But, when I change the existing SQL Command text and save the package, the changes are lost.
    It keeps going back to the original SQL Statement.
    It is currently “select col1, col2, … col10 from view1”.
    When I change it to anything else, like “select col5 from view1”, and save, and then double click the ADO NET source again, I find that the SQL command text is still the old one. It goes back to the previous statement.
    I’ve tried other statements like “exec macro” for Teradata, etc. but the same thing keeps happening - changes are not saved.
    Does anyone have any ideas on this, or have you seen this before?

    This is odd, but seems to be a component metadata corruption; so why don't you:
    delete the teradata connector and source component, then re add them back, see if it now accepts the new SQL statement, if this does not work
    abandon this package and create a new one replicating the functionality incorporating the new SQL.
    In case #1 and 2 both fail post here any errors observed and find out whether you are missing any updates to either Teradata provider or SQL Server
    Arthur My Blog

  • SSIS Data Flow task using SharePoint List Adapter Setting SiteUrl won't work with an expression

    Hi,
    I'm trying to populate the SiteUrl from a variable that has been set based on a query to a SQL table that has a URL field.  Here are the steps I've taken and the result.
    Created a table with a url in it to reference a SharePoint Task List.
    Created a Execute SQL Task to grab the url putting the result set in a variable called SharePointUrl
    Created a For Each container and within the collection I use the SharePointUrl as the ADO object source variable and select rows in the first table.
    Still in the For Each container within the Variable mappings I have another Package Variable called PassSiteUrl2 and I set that to Index 0 or the value of the result set.
    I created a script task to then display the PassSiteUrl2 variable and it works great I see my url
    This is where it starts to suck eggs!!!!
    I insert a Data Flow Task into my foreach loop.
    I Insert a SharePoint List Adapter into my Data Flow
    Within my SharePoint List Adapter I set my list to be "Tasks", My list view to be "All Tasks" and then I set the url to be another SharePoint site that has a task list just so there is some default value to start with.
    Now within my Data Flow I create an expression and set the [SharePoint List Source].[SiteUrl] equal to my variable @[User::PassSiteUrl2].
    I save everything and run my SSIS package and it overlays the default [SharePoint List Source].[SiteUrl] with blanks in the SharePoint List Adapter then throws the error that its missing a url
    So here is my question.  Why if my package variable displays fine in my Control Flow is it now not seen or seen as blanks in the Data Flow Expression.  Anyone have any ideas???
    Thanks
    Donald R. Landry

    Thanks Arthur,
    The scope of the variable is at a package level and when I check to see if it can be moved Package level is the highest level.  The evaluateasexpression property is set to True.  Any other ideas?
    I also tried to do the following.  Take the variable that has the URL in it and just assign it to the description of the data flow task to see if it would show up there (the idea being the value of my @[User::PassSiteUrl] should just show in the
    description field when the package is run. That also shows up blank. 
    So i'm thinking its my expression.  All I do in the expression is set [SharePoint List Source].[SiteUrl] equal to @[User::PassSiteUrl] by dragging and dropping the variable into the expression box.  Maybe the expression should be something
    else or is their a way to say  @[User::PassSiteUrl] = Dts.Variables("User::PassSiteUrl2").Value.ToString() 
    In my script task I use Dts.Variables("User::PassSiteUrl2").Value.ToString() to display
    the value in the message box and that works fine.
    Donald R. Landry

  • Data Flow Task problems after installing SQL Server 2014 SSIS

    I can't create any Data Flow Task. Once I create (tested and working) Connection (it doesn't
    matter if it is Excel, Flat File or other) and try to use it with a Source Assistant, I get the following messages:
    ===================================
    The component could not be added to the Data Flow task.
    Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
    ===================================
    Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
    Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
    ===================================
    Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
    Program Location:
    at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
    at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
    ===================================
    The component could not be added to the Data Flow task.
    Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
    The component could not be added to the Data Flow task.
    Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
    ===================================
    Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
    Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
    Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
    Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
    ===================================
    Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
    Program Location:
    at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
    at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
    Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
    at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
    at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)

    See examples here:
    http://www.sqlusa.com/bestpractices/ssis-wizard/
    What is your data source?
    What is your data destination?
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Database Design
    New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Maybe you are looking for

  • Connecting iPod to hifi system

    I have a hifi dock but the iPod is in a leather case. I can't plug it in to the dock without taking it out of the case because the whole package is too thick, but the case is a very tight fit which makes removing the iPod from the case quite difficul

  • How do I make a loading screen where every 5% loaded something pops up??

    Hi, okay, I want to make a preloader, and I know how to make basic ones (where a rectangle gets bigger as the amount of loaded content increases), but I would like a little more complicated one, like this: I have 20 letters in my website title, and w

  • Extending a BT Infinity Installation to be able to...

    I have recently had BT infinity installed. Unfortunately, I was not around when the installation was completed so I now have the modem and hub in my hallway next to the maastewr socket. All my devices work fine over the WiFi except my ageing iMac. Wh

  • Zsnes 1.42 fails to detect opengl libs

    Hi there, I'm new to archlinux (although not new to linux in general) and really like it so far. However I'm having some problems with compiling zsnes 1.42. For some reason zsnes fails to detect opengl. I'm running libgl 7.0.3rc1-1 and mesa 7.0.3rc1-

  • Interaction record supress

    Hi, I am trying to implement the BADI CRM_IC_IARECORD for suppressing creation of interaction records.The interaction record should get generated only when the user clicks on the interaction record work center. I passed RV_SUPPRESS_IREC as true but t