Code page of the receiver system could not be found".

Hi,
We are getting an error in IDOC-XI-IDOC scenario that the "code page of the receiver system could not be found".
What could be the reason for this error?
Because of this error all IDocs are getting stuck in XI.
Kindly help.
Thanks,
John

Hi john,
Have a look at this thread:
"Could not determine code page" inbound side error
This could be usefull.
Carlos

Similar Messages

The definition of the READ RFC to the managed system could not be found. Pl

Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PM

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

Code page of the receiving system cannot be found?

Hi,
I am sending Idocs from SAP ECC 6.0 System to Siebel System for message type ORDERS. All the idocs are failing and are in 02 Status.
We have already implemented OSS Note mentioned for this particular error, but still the error persists. So, can you one let me know what could be the reason why Idocs are failing and what needs to be done in order to avoid this type of error in future once again.
Raghuram.

Hi john,
Have a look at this thread:
"Could not determine code page" inbound side error
This could be usefull.
Carlos

READ RFC to managed system could not be found

I am trying to run the managed system configuration in Solution Manager for NetWeaver CE (Java) system. The step "Configure Diagnostics" fails with 1 error and 2 warnings:
[SSO] SSO setup OK
[Roles] At least one support role assignment did not succed, check details below and logs for more info
[SAPRouter] 2 entries for SapRouter configuration were added or updated to table AIDIAGPORTS
[Wilyhost Agent] Wilyhost Agent setup finished successfully with limitations. Data of at least one action is not available in Enterprise Manager(sapmd1ci.itg.ti.com:6001).
[E2E RFC] The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
[E2E RFC] The E2E Extractors Batchs were succesfully started for sapdsbxci/XD1/00 (sapdsbxci)
I have done RFC definitions for ABAP systems in SMSY transaction but this system is NW CE 7.11 (Java) only system. How do I define READ RFC for JAVA system? What do I need to do to get rid of this error above?
Regards,
Asif

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)

Hi,
I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.

Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.

"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}

I am using intermec printer (directly loading to the printer no system used for printing) for this program and if i run this,i'm getting this below error
"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}
any help on this .........
Thanks in advance.
using System.Globalization;
using Intermec.Printer;
using System;
using System.IO;
using System.Threading;
class TestCommunicationUSBHost
static UI.Canvas _canvas;
static UI.Keypad _keypad;
static UI.Canvas.Text _exitInstruction;
static UI.Canvas.Text _appliCationTitle;
// static UI.Canvas.Text _companyname;
static string _operatorCodeValue;
static UI.Canvas.Text _operatorCodeDisplayText;
private const string operatorCodeDisplayHeader = "SCAN Code: ";
static PrintControl printControl = new PrintControl();
static Drawing drawing = new Drawing();
private static bool _isExitKeyPressed = false;
// private static Communication.USBHost _usbHost;
static int Main(string[] args)
// Init new UI canvas
_canvas = new UI.Canvas();
// Set up some colors to use
Color white = new Color(255, 255, 255, 255);
Color blue = new Color(50, 100, 150);
// Add UI black background
UI.Canvas.Rectangle bg = new UI.Canvas.Rectangle(0, 0, _canvas.Width, _canvas.Height, blue);
_canvas += bg;
// Add Line
UI.Canvas.Line ln = new UI.Canvas.Line(10, 35, 300, 35, white);
_canvas += ln;
// _companyname = new UI.Canvas.Text(30, 45, "KEYBORD DEMO", "Univers Bold", 18, white);
// _canvas += _companyname;
// Add UI keycode text
_exitInstruction = new UI.Canvas.Text(20, 200, "Press [F4] to EXIT.", "Univers Bold", 18, white);
_canvas += _exitInstruction;
_appliCationTitle = new UI.Canvas.Text(05, 05, " A1 Technologies", "Univers Bold", 23, white);
_canvas += _appliCationTitle;
_operatorCodeDisplayText = new UI.Canvas.Text(20, 100, operatorCodeDisplayHeader, "Univers Bold", 20, white);
_canvas += _operatorCodeDisplayText;
// Set up keypad event handler
_keypad = new UI.Keypad();
_keypad.KeyDown += new UI.Keypad.KeyEventHandler(KeyHandler);
// Set up timer event handler
UI.Canvas.Timer timer = new UI.Canvas.Timer();
timer.Interval = 1000;
timer.Tick += new UI.Canvas.TimerEventHandler(TimerHandler);
timer.Start();
//int USBHost port o or Setup USBHost
Communication.USBHost _usbHost = new Communication.USBHost("/dev/ttyUSB0");
_usbHost.Open();
// Enter UI main loop
_canvas.Run();
// Cleanup UI
_canvas.Dispose();
_keypad.Dispose();
return 0;
public static void KeyHandler(Object o, UI.Keypad.KeyEventArgs eventArgs)
int keycode;
keycode = eventArgs.KeyChar;
if (keycode == 4)
_isExitKeyPressed = true;
return;
public static void TimerHandler(Object obj, UI.Canvas.TimerEventArgs eventArgs)
if (_isExitKeyPressed)
UI.Canvas.Timer timer = (UI.Canvas.Timer)obj;
timer.Stop();
_canvas.Exit();
else
// Open the first USB host device and read any data sent
Communication.USBHost usbHost = new Communication.USBHost("/dev/ttyUSB0");
usbHost.Open();
if (usbHost.IsOpen)
Console.WriteLine("Opened /dev/ttyUSB0 ({0})", usbHost.HIDName);
FileStream fileStream = usbHost.GetStream();
try
int timeout = 0;
int i;
while (timeout < 5)
// Console.WriteLine("Exiting in {0} secs", 10 - timeout);
Byte[] bytes = new Byte[256];
if ((i = fileStream.Read(bytes, 0, bytes.Length)) > 0)
// string data = System.Text.Encoding.ASCII.GetString(bytes, 0, bytes.Length);
string data = System.Text.Encoding.ASCII.GetString(bytes, 0, i++);
_operatorCodeValue = data;
// _operatorCodeValue = _operatorCodeValue + data;
_operatorCodeDisplayText.Data = operatorCodeDisplayHeader + _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
int leftCordinate = 40;
drawing.Clear();
Drawing.Text line1Text = new Drawing.Text();
line1Text.Point = new Point(leftCordinate + 30, 40);
line1Text.Data = _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
line1Text.Height = 18;
line1Text.FontName = "CG Times Bold";
drawing += line1Text;
drawing.PartialRendering = true;
printControl.PrintFeed(drawing, 4);
else
Thread.Sleep(1000);
timeout++;
catch (Exception ex)
Console.WriteLine("Exception reading /dev/ttyUSB0: {0}", ex.Message);
// Wait a short while
Thread.Sleep(1000);
// Clean up
// usbHost.Dispose();
return;

Hiya,
The error is because the app tried to import that driver but it was not found. So, you will need
to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
The code snippet does not show any information about the DLL import, check there too.
Hope this helps. :)

Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (...SQORA32.DLL).

I recently upgraded from 10g to 11g and upon this upgrade, a website of mine stopped working.
It is a classic ASP website. I added a "testdatabase" page to the website to test the basic functionality of opening a connection. I've pasted the testdatabase page below. Anyways, upon running this page, I get this error:
Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (Oracle in OraClient11g_home1_32bit, D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL).
I have two other environments where I have done the same upgrade and the site works just fine. I have compared all the IIS settings in my other environments to that of the one suffering from the error. Also, in the IIS settings, I have made sure that "Allow 32bit" was checked.
D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL is actually where this DLL resides.
I have also checked to make sure the environment variables are correct.
The very first environment variable in the PATH setting is D:\app\oracleadm\product\11.2.0\client_1\bin; and there are no other references to oracle in the PATH environment variable.
I have done a google search and I've seen that people also tell me to check ORACLE_HOME to make sure it's correct. I've checked this in both of the working environments and there is nothing there. There is also nothing there in the broken environment. What should be there? If anything?
I don't know where else to look. What could be causing this error?
<%
Option Explicit
Response.Expires = 0
Response.Buffer = true
Dim conn
Err.Clear
On Error Resume Next
Set conn = Server.CreateObject("ADODB.Connection")
conn.Open "DSN=RPS11;UID=FFXQM;PWD=ffxqm6prd$"
If Err.Number <> 0 Then
Response.Write (Err.Description & "<br><br>")
Response.End
conn.Close
Set conn = Nothing
End If
conn.Close
Set conn = Nothing
On Error GoTo 0
%>

As a temporary solution, add the Administrators group to the IUSR and IWAM userids and see if that works. If it solves the problem, then it IS a matter of setting the users privledges correctly.

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Recently got a new computer and installed itunes from external drive - all music shows up in the library, however when i click on a song i receive this message "the song could not be used because the original file could not be found". What do i do?

I recently got a new computer and installed itunes from which had been saved onto an external drive - all music shows up in the library, however when I click on a song I receive this message "the song "abc" could not be used because the original file could not be found". What can I do?

I was given the option to locate the file where the song is held. If so select "locate" and direct it to the folder / file where the song is and open it. itunes then will give you the option to use this process to update all of your library. OK that as this will do it automatically instead of doing them one by one. I hope this helps.
Martin

The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)

Hi All,
I have existing SSAS project. Previously it was working but now its showing following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)
Please provide the solution.
Thanks & Regards,
Vivek Singh

Hi Vivek,
According to your description, you are experiencing the error "The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)" when opening the SQL Server Analysis Services project that can be opened
without any problems, right?
Based on my research, the issue is caused by that some .dll files in your SSAS instance are corrupt. In your scenario, can you open other SSAS project? Please download the Adventure Works for SQL Server 2012 sample project and check if
you can open it or not.
https://msftdbprodsamples.codeplex.com/releases/view/55330
Besides, here are some similar issue with your, please see:
https://social.technet.microsoft.com/Forums/en-US/29e3cef1-4699-4710-9aa5-d56cf4a279c5/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e-systemwindowsforms?forum=sqlanalysisservices
https://social.technet.microsoft.com/Forums/en-US/b2faae67-19af-4f50-88c6-5a427556df3e/error-encountered-when-creating-new-integration-services-project-0x8007007e?forum=sqlintegrationservices
Regards,
Charlie Liao
TechNet Community Support

Error code "The specified module could not be found"

I am getting the error code "The specified module could not be found" whenever I try to open the editor

Hi owenskier,
Please try the steps mentioned in the given link:- Error message (The Specified module could not be found) how do I fix the problem?
Let me know if this helps.
Sarika

A song will not play. I have received message: could not be used because the original file could not be found. Will appreciate help on how to retrieve it.

A song will not play.
I have received message: could not be used because the original file could not be found.
Will appreciate help on how to retrieve it.

You will need to go into your Files and locate the song. By default, iTunes saves songs in the iTunes Media Folder which can be found in the following locations:
Mac OS X: /Users/username/Music
Windows XP: \Documents and Settings\username\My Documents\My Music\
Windows Vista: \Users\username\Music\iTunes
Windows 7 and Windows 8: \Users\username\My Music\iTunes
If you locate your song file, when you try to play it in iTunes, you will be given an option to locate. Navigate to the file in the pop up window and iTunes will re-path the file location.
Most people encounter this issue when moving to a new computer or if you have your music saved on an external drive or folder that you have since moved or removed. The imperative part is finding the song so you can re-map it.

Where will be the IDOC data saved when the receiving system is not ready

where will be the idoc data saved data when the receiving system is not ready

Hi karthik,
If the receiving system is not ready ,
the data is to be transferred and function modules to be invoked are temporarily stored in tables ARFCSSTATE and ARFCSDATA. once the receiving system is ready , the entried in these tables wiil be deleted.
regards,
Prasad kodi.

When I double click on a song in my iTunes Library i receive the following: the song "....." could not be used because the original file could not be found. Would you like to locate it?

Greetings all
When i double click on a song in my iTunes library the following appears:
The song "......" could not be used because the original file could not be found. Would you like to locate it?
Hope you can help
revds

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2

A server with the same hostname could not be found!

Hi macusers,
I saw that error on multiple threads but I found none related to my issue. So, before ignore it let's describe it:
Two MAC Mini: one early 2009 and second late 2010. Both OS 10.9.1, MacKeeper installed, 6+Gb for RAM. Both uses the same router to connect the internet. Both are LAN connected not WiFi. I even changed the DNS addresses on router using Google DNS.
On Mac 2009:
1. Safari opens pages randomly. Sometimes a website is not open but when I create a new tab and select the website from bookmarks the website is opened while in previous tab still says: Safari cannot find the server .... All those websites are used in my daily work. I am not reseting Safari unless necesary.
2. MAIL is showing online only Gmail acccount from 4 accounts. The rest of the accounts are not Gmail and appear as Offline. I restart MAIL and they appear online. I have to do that Open/Close MAIL several times a day.
3. Sharefile and oDesk Team application cannot be opened because of that error: A server with the same hostname could not be found!
4. Apple Store is displaying questions marks instead of the icons and I can barely see what softwares I have installed.
Now the beauty. Only on MAC 2009 I am experiencing those issues. The other MAC is fine. So far.
What I tried so far:
A. Reboot in SafeMode and Repair Permissions, Repair Disk. Everything OK.
B. PRAM Reset and SMC Reset.
C. Scan for viruses. No virus detected.
oDesk Team app is working fine on the other MAC and I managed to install it on Mac 2009 on Windows 7 partition as well. Is working fine.
Here are some screenshots showing you some of the errors I am picking on my side.
That one is taken while trying to connect to ShareFile. After three or four attempts it finally managed to connect.
That was a beauty. While MacKeeper was showing me that I am Offline, I was talking on Skype with a friend.
Still cannot access oDesk Team application. However, after several attempts it is logging but what is showing me is a real nightmare.
If I choose to see my contracts (though in the upper corner there is not my account) they do appear:
Any valuable entry will be highly appreciate it.
Warm regards,
Sebastian
P.S. I just remembered that I saw on a post in here related to the same error that someone from Apple asked a guy to make a test in terminal using a command line. I do it on my MAC and here is the result:
Message was edited by: sebdea

Hi Grant,
Here is what I did and so far seems it is wworking.
1. I deleted oDesk and ShareFile. I removed them using MacKeeper (I found this application very usefull for uninstalling applications as MacKeeper looks for them all over the computer: cache, preferences, application support etc.) While for oDesk is simple as I can look myself for oDesk in any file names, whith ShareFile was a little tricky to amke it amnually as MacKeeper find files that contain Citrix name then ShareFile. I will not guess unless I would search the internet on how to manually remove sharefile from my system.
2. I manually delete all cahe files and folders from ~Library and ~User/Library.
3. After reboot I installed Onyx and order maintanance where I checked all its options, including but not limited to DNS caches, fonts caches, everything.
4. After I reboot computer, I went in Disk Utility and Repaired permissions.
Reboot again. Now seems to work fine. At least odesk Team is working properly. I will have a second thought for installing ShareFile.
Some romanian mac users suggested to check my router connectivity and change some DNS in it. Looks like that was also a problem on some MACs. I recall the few weeks ago I had an issue with TP Link router. My computer wasn't connected to internet, though router showed that there is internet connection. I ping router from my computer and I received answer from ping. I ping google from computer, nothing. I ping google from router, was wroking. I connected the computer directly to internet without router, was wroking. When connected back through router, nothing. I contacted the guys from TP Link and they suggested to use google DNS instead of those my ISP provided. But since then I had not experienced any issue with router and internet, until now. The DNS are still those from google.
I will keep you updated if any issues are appear again. So far, it is working perfectly as it supposed to work.
Warm regards,
Sebastian

Code page of the receiver system could not be found".

Similar Messages

Maybe you are looking for