Codec settings not available greyed out AME Premiere Pro

Hello,
In CC 2014, when I want to transcode something to Quicktime/ProRes codec, the usual "Codec Settings" button in the Video Codec field is greyed out or not available. It was available in CS6... I could click on it and choose settings, but now I can't.
Just a little bg, but I don't think it matters, I can't choose it no matter what QT codec I choose: I have 23.976 final output that I want to convert to 29.97i for broadcast. Unfortunately, through various tests, in order to get the pulldown correct (without field blurring frames), in CS6 I would set it up in AME, then click the Codec Settings, and select Interlaced. Under Basic Video Settings field all is the usual 29.97, Upper First, etc. But to actually get the correct pulldown (repeat frame every 3 or 4 frames) I need to select the Codec Settings and select interlaced. Unfortunately, in CC 2014, I can't seem to access this option.
Any ideas? Codecs are in the system, everything else seems as it should be...
Thanks,
J

If the volume/disk is setup to be handled by ACLs (the default for 10.4.x) the older style "inherit permissions" is greyed out.
You can achieve inherited permissions from adding ACL permissions to the shared volume/folder by going to Sharing, Access "tab" in WGM. The first level of the share is never inherited (no) but the next level "down" will be (yes).
ACLs on or off is set in WGM by using the All "tab" in Sharing, choosing the volume and the General "tab".
ACLs override the POSIX settings: owner, group, everyone, and is hierarcial (permission list is read/enforced from top -> bottom, first matching "rule" goes)

Similar Messages

Just upgraded to Yosemite trying to add signature in Safari mail photo testing Annotations and trackpad is not available (greyed out) only camera is anyone have suggestions

Just upgraded to Yosemite trying to add signature in Safari mail photo testing Annotations and trackpad is not available (greyed out) only camera is anyone have suggestions?

I certainly understand the need to have an operable device! Please DM me your name and mobile number, so I may further assist you. Thank you!
TominqueB_VZW
Please follow us on Twitter @VZWSupport

Why is "edit in Audition" greyed out in Premiere Pro and After Effects?

Since the CC 2014 launch, the option in in Premiere Pro and After Effects to "edit in Audition" is greyed out. Right-clicking a clip in Premiere Pro doesn't have an option for Audition. I cannot send my compositions, sequences or clips to Audition for audio editing. I contacted an Adobe Support personnel earlier this evening. They suggested to go into my Mac's System Preferences and enable a root user, log out of my account, log into the root user, shut down and boot up into safe mode. None of these scenarios worked. It is still greyed out, in both user accounts.
Is this a known issue? I even uninstalled and reinstalled Audition. Still nothing. All my Adobe apps are updated. My Mac is updated. Again, never had this issue before.
I'd appreciate any assistance!
Thank you!
Cheers,
Evan Lockhart

I may have an answer for you, but not sure if my resolution will work for Macs.
First, here's my system and initial info. I'm using a work computer, operating system is Windows 7. I just upgraded to Adobe CC 2014 about a week ago, and I also uninstalled the previous versions of all my Creative Cloud programs after installing the new versions (CC 2014 doesn't just update the previous version, it installs a new program and doesn't automatically uninstall the previous CC programs). Not sure if the uninstall is necessary, for this resolution to work.
Anyway, after I installed Premiere Pro CC 2014 and Audition CC 2014, the Edit Clip in Adobe Audition command was available from the Edit menu in the Menu bar, but was disabled in the right-click menu for the sequence (for the right-click menu, it was visible, but greyed out and disabled). When I tried to use the command from the Edit menu in the Menu bar, it gave me a dialog box to fill out and it created a new folder (titled "Adobe Audition Interchange"). So, the command, when selected from the "Edit menu" obviously uses a different process than the command from the right-click menu. Anyway, I didn't want a new folder created or to fill out a dialog box, I just wanted it to behave like it used to. Basically, when I right-click the sequence and select Edit Clip in Adobe Audition from the right-click menu, it just opens Audition and the audio waveform is visible.
I was able to resolve this and get the right-click command working by reading a couple of articles on this same issue from Adobe CC (not CC 2014) and using those to figure out how to fix this in Adobe CC 2014.
Here's what I did:
I had to locate my .sesx files in my system. They are NOT in the same location as they were for the previous version of CC (at least, they weren't for me). I had to use the Search command and look for .sesx extensions to locate them.
Found them under the path C:>Users>Public>Public Documents>Adobe>Audition>7.0>Session Templates. Note that (for me), there was a folder titled 6.0 on the same level as the 7.0 folder. I selected the 7.0 folder as that folder contained the most recent set of .sesx files. I checked the 6.0 folder and those were the .sesx files from the previous version, so I deleted that folder just as a clean-up step.
I right-clicked on one of the .sesx files in the Session Templates folder and then selected Open with from the right-click menu. The Open with dialog box displays and provides a list of programs.
I selected Adobe Audition CC 2014 from the list of programs (you may have to browse to find it) and then selected Always use the selected program to open this kind of file. I then clicked OK to submit the configuration command and close the Open with dialog box.
I restarted Premiere Pro CC 2014 and the Edit Clip In Adobe Audition command was now enabled on the right-click menu and was working properly.
I wept with joy..... OK, not really, but I'm always irritated at ridiculous regression errors and a lack of thorough testing of new software versions, so I am happy to resolve frustrating issues.
Don't know if this will help you, or if you already resolved your issue. Either way, good luck!
~ Jim

After Effects composition greyed out on Premiere Pro timeline.

Hi,
I have created a timeline in PP CS4, right clicked certain clips and replaced them with AE compositions (using Dynamic Link) and I have then tried to motion stabilize these clips.
However, having completed the motion stabilization in AE and switched back to PP, the clip is greyed out (diagonal bars across it) on the timeline, and scrubbing through the clip now show me that there is no longer any contents shown in the Program monitor.
What gives? Are there certain things that can't be carried through the Dynamic Link feature from AE to PP?
Is there a work-around to this problem?
Thanks
Mikkel

I have same problem, render queue opens and menu items greyed out. I cannot find ae_render_only_node.txt on my system. Am also getting warnings to update CUDA which I did. Now get a warning about not enough VDRAM for 3D... Using latest AE CC 2014 on Yosemite.
Any more suggestions? I just want to open AE and don't plan to do 3D work for now.
Thanks,
C

Video rendering and playback option greyed out on Premiere Pro CC 2014

I cannot even click on the Video rendering and playback drop down menu as it is greyed out.
I have a GeForce GTX 660 2GB card which should be supported as it has enough memory. I am on Windows 7.
Would really appreciate if someone has a solution how to enable Mercury Playback Engine in this situation.

Managed to fix the problem by downloading and installing the GeForce CUDA drivers as well as updating graphics card firmware.
The Mercury Playback engine enabled itself in premiere after the updates.

Why is "Direct Link to Adobe SpeedGrade" greyed out within Premiere Pro?

Just installed SpeedGrade CC 2014 and "Direct Link to Adobe SpeedGrade" is greyed out from within Premiere Pro CC 2014. Help.

Great to hear you are up and running again! FYI the is the Creative Cloud App's forum. Future Premiere Pro questions should asked here: Premiere Pro
Thanks,
Benjamin

Context (right click) link to edit audio track with Audition is greyed out in Premiere Pro CS6

I have reported this previously in the forum and I've seen some other posts on this and was hoping that there is either a solution or workaround for this real workflow issue. I read that this is a known bug inserted with the update to 6.0.1. It is now 6.0.3 and time to fix this bug please.
Adobe, if you're listening, this is all about workflow. It's disruptive to a workflow situation where deadlines are important and it shouldn't be a difficult programming problem to fix. It worked before. Make it work again. That's not asking a lot from a customer who has been a Premiere user since the 90s.
Thank you.

It does work for most. So we have to find out why it isn't for you. (Though admittedly, I'm not even sure what questions to ask trying to track down the cause.)

HT3775 bought Bushnell trail cam: worked,got 2nd cam: worked. Got 3rd cam which needed DIV X,so downloaded, now can't view 1st 2 cams. msg " required codec is not available" ***? worked for 2 years till downloaded DIV X now can't view old cams. Suggestion

I bought a Bushnell trail cam. Worked well, each video presented on the screen with the opening frame of the 10 second video. I could tell at a glance what the video was.( I have to guess it used quicktime ). I bought a second cam, same results as first. I bought a 3rd cam ,( all bushnell ), which required me to download " DIV X ", which I did. Now, I can no longer view the first frame of the 10 sec video, it just has an icon that says "AVI XXX" ( XXXbeing the number of the video ). I now have to click the icon, go to "Action" drop down "open with" and select DIV X , for each "anonymous" video, ( as I cant see what they are any more , just a number). Furthermore, I can no longer view my old videos. A message shows up saying " a required codec is not available" ***????
The 2 original cams worked for 2 years with no problem, but since downloading DIV X I cant play the older ones. I should point out that even if I select a (now) anonymous video, go to " Action", drop down "open with" and manually select quicktime, the message still shows up about the codec.
Suggestions??
Thanks for any help

hello sir,
i want to your help
i was installed fresh windows 7 via cd rom and then after installed all software.
and now after 1 day customer complained me that cd rom not read any cd and i m also check when i insurt cd so its not read and when i am double click on cd rom icon its eject so what i do for that please reply on my email address.
[text removed for privacy]
VIMAL

TS1398 WiFi selection in settings is all greyed out - I cannot choose a WiFi connection

Suddenly my WiFi connection on iPhone 4S is kapput. WiFi selection in settings is all greyed out - I cannot choose a WiFi connection

I have the same issue - and I've tried everything listed in these forums and more. Nothing has worked - and I've had the phone less than 24 hours.
I took it to an Apple store to see a Genius this afternoon. They don't say what is wrong, but offered to replace the phone however BEWARE - when they say they will replace it, they often mean with a refurbished device, they will not replace it with a new device. Because I bought mine from a different retailer, even though it is an Apple device failed less than 24 hours out of the box, Apple will not give me a new phone - they acknowledged that it is a manufacturing defect, and couldn't understand why I was not satisfied with receiving a refurbished device. This seems ridiculous to me - I'm a long-time, repeat customer - but that doesn't appear to matter. I've heard great things about Apple customer service, now that I've needed it, I've found it isn't so great after all.
I got in touch with the retailer from whom I purchase the phone - they were shocked that Apple would not replace it - especially since I have Apple Care. They are now trying to get it worked out and obtain a new phone for me.

How can I get Quicktime to open my WMA file- it says a required codec is not available

How can I get Quicktime to open my WMA file- it says" a required codec is not available"?

please jon, where I can find those "Flip4Mac" codec packages?
Gp to http://www.telestream.net/flip4mac/ to see a comparison list of codec components available and what each set can do.

HT204382 Jfiles, still getting error message that required codec is not available -- Help!

Just installed Telestream to open wmv files, but still getting error message that required codec is not available -- Help!

I'm still getting that same message how did you fix it? i installed the wmv player or Flip4Mac (i'm unsure if thats the same program), but even after i am still getting the pop up saying " The movie ____.avi" can't be opened. What am i doing wrong?

HT4284 We are trying to open .mov files using Quick Time. It says that it is unable to open it because a codec is not available. What do we need to do?

We are trying to open and edit .mov files using Quick Time. It says that it is unable to open it because a codec is not available. What do we need to do?

he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil

I am having problems accessing my airport utilities, the area which allows me to alter settings is all greyed out. Can anyone help?

I am having problems accessing my airport utilities, the area which allows me to alter settings is all greyed out. Can anyone help?

Using the same Ethernet cable that is used to connect the modem to the AirPort Extreme, disconnect the Ethernet cable from the AirPort Extreme and connect it directly to your Mac as a test for 4-6 hours.
Be sure to power off the modem for 5-10 minutes when you do this, so that it will associate with the new device that it "sees".
Does the connection drop when you connect this way? If yes, then replace the Ethernet cable and run the test again for 4-6 hours.
If the connection still drops, you likely have a defective modem or a line problem on the cable service....despite what the cable company might say.
If the connection remains solid when you run the "test", then you know that the modem and Ethernet cable are working correctly.
If you have performed a factory default reset on the AirPort Extreme a few times, and connection still drops, then you should take the AirPort to an Apple Store....if you have one near you..... to let them take a look, or contact Apple Support directly.
http://www.apple.com/support/contact/

Why not Chinese Adobe cs2 photoshop, Premiere Pro??

Why not Chinese Adobe cs2 photoshop, Premiere Pro??
http://www.adobe.com/tw/downloads/cs2_downloads/index.html
I'm Chinese users
i'm Can not be enabled
my cs2

Why do you want to use an obsolete version of the software?
Photoshop CS6 supposedly is available in simplified and traditional Chinese language versions and as I supect you are not likely to get a lot of support for CS2 you may want to consider purchasing a license.
http://www.adobe.com/products/photoshop/tech-specs.html
I’ve read that the Cloud License allows for installing multiple language versions by the way.

Tried to reinstall my CS6 master collection onto my iMac. It will not install - In Design, Fireworks, Premiere Pro, Encore, After Effects, Flash Professional, Photoshop, Illustrator & Prelude. Could you give me some advice. I noticed problems when I was d

Tried to reinstall my CS6 master collection onto my iMac. It will not install - In Design, Fireworks, Premiere Pro, Encore, After Effects, Flash Professional, Photoshop, Illustrator & Prelude. Could you give me some advice. I noticed problems when I was doing some 3D work and the computer kept crashing and thought I would just reinstall my software.

uninstall (using the uninstallers), clean Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 and then reinstall.

Codec settings not available greyed out AME Premiere Pro

Similar Messages

Maybe you are looking for