COGS Values are not flowing to COPA

HI
Dear experts
here i  have prepared copa report , but cogs values are not comming to copa report
cogs elements have been created by taking cost element category "1"
Regards
RAJESH

Hi,
Can you check whether COPA document is created for billing document and COGS value field is updated in this document? If this value is not updated then you need to check COGS value field mapping to COGS condition type (generally VPRS).
If the COGS value is updated in COPA document then you need to check COPA form and report.
Let me know if you need further details.
Thanks & Regards,
ADI

Similar Messages

  • Revenue values are not flowing into COPA

    Dear Experts,
             We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
    May I know the exact reasonu2026.
    Please suggest me in right wayu2026.
    Regards,
    Balaji Bhonsle.

    Hi Balaji bhau
    I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
    See if the Billing Type has been entered in KE4W and the VF reset for it
    Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
    br, Ajay M

  • Values are not flow to COPA

    Can you please clear some point.-
    1.According to my understanding, From SD data will flow through condition type,which is assign with value field and condition types are assign with Pricing Procedure.
    In my problem, Condition type-YREC(Packing tax) is in Pricing Procedure and YREC assign with value field VV031 but amount is not flow to COPA.
    2.Please tell me the FI flow to COPA
    Please help me.

    <b>Pl try KE4ST billing transfer simulation</b>
    Simulate Billing Document Transfer
    In the activity "Simulating the Transfer of Documents from Billing", you have the option of simulating the transfer of billing document data into Profitability Analysis.
    Simulation occurs on the basis of the Customizing settings valid at the time it is carried out. You can view the characteristics and value fields of the line item to be written to COPA.
    The function "Valuation analysis" allows you to perform an analysis of the valuation strategy valid for valuating billing document data.
    You can also restart the simulation of document transfers for billing documents that have already been transferred. This option should simplify in particular the analysis of error situations that have arisen.
    Performing this simulation causes no data to be posted to COPA or to other modules.
    <b>Check tcode KEAT also</b>
    Check Value Flow in Billing Document Transfer
    In this activity, you can compare your actual data in Profitability Analysis with the data posted in Financial Accounting (FI). This makes it possible to analyze the flow of values from SD billing documents to CO-PA, find and analyze any differences between the different applications.
    Billing data is stored by condition types in SD, accounts in FI, and value fields in costing-based CO-PA. The reconciliation report yields a list of the balances for value fields, condition types, and profit and loss accounts.

  • Sub Contracting Values are not flowing in to COPA

    Hi,
    PP guy has run Sub-Contracting scenario, later when i see the postings in COPA, those are not flowing into COPA. Amount is showing only in FI.
    510085 Consumption - Subcontracting =800
    520085 Inventory Change - Subcontracting = -5800
    How to bring them into COPA report. Please advise me..
    Thanks
    KB

    Add those cost elements to the automatic account assignment table (t-code OKB9) ans click the profitability segment assignment box.  If using cost based COPA, assign these cost elements to a PA transfer structure (KEI2) so that they are assigned to the correct value field.
    thanks,

  • Excise Values are not flowing from J1IJ to VF01

    Hi All,
    I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
    I have gone through SDN, everybody is suggesting about 356 routine.
    My scenario is STO from Plant to Depot and Sale from Depot to Customer.
    ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
    In J1IJ, excise values are coming but in VF01 it is not coming.
    Kindly help me.
    With Regards
    Azeez.Mohd

    Hi,
    in j1ig initial screen which excise group/series group i need to enter
    is it of supplying plant or depot --- Enter Your Excise group
    If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
    it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
    You can also use the Excise Invoice Details tab
    Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
    use Depot Excise Invoice in case of transfer from another depot
    and Excise Inv. Date
    On next screen,
    In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • Depot Sales-Excise values are not flowing from J1iJ to VF01

    Hi Gurus,
    In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference. And the excise values are shown here correctly.
    Issue: In VF01- when we are raising the commercial invoice , the duty values are not flowing from the J1IJ transaction. Instead the values are showing Zero for all the three condition types namely JEXP, JECS and JHCS. We have used the Pricing Procedure ZINDEP and 356 routine.
    Inputs on this how to solve will be highly appreciated.. as we are in critical stage.
    What are the checks to be ensured to Get the values flow from J1IJ to VF01.
    Scenario: STO from Mfrg Plant to Depot and Depot sales to customer.
    Me21N-Me29N-VL10B-VL02N-VF01-J1IIn-MIGO-(STO process completes)-VA01-VL01N-J1IJ-VF01(duty values should flow from the J1IJ referenced Excise Invoice) Correct me if I am wrong.
    Any user exits, Notes please let me know. I could not find any. I have gone through the forum threads, which speaks about 356 routine, J1ID- checks etc.
    Thanks&Regards
    Sreekanth:

    Hi!
    Am sure you would have captured the Excise at Depot with J1IG.
    Also, have you saved the billing document to check the duties? 
    Thirdly, after save, again open the billing doc and go to Header-Conditions then Save. This part does not seems logical, but i am sharing my practical experience.
    Please check condition records if any.
    Regards
    Arun

  • Excise values are not flowing  in MIGO

    Dear All,
    I am facing a problem during MIGO.
    THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
    1 I have created a PO.
    2.Delivery through VL10D
    3.Picking-vl02n
    4.Created Bill-VF01
    5.Created Invoice and saved it
    When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
    Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
    Regards
    Manash

    Hi,
    Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
    SETOFF Must Be Maintained:-
    JMX1 --     IN: A/P BED setoff
    JEX1 ---      Ecess Setoff Sta
    HX1     IN: A/P SECess SOTot       
    If it is there please follow the Following steps for STO
    1.     Create Purchase Order(STO)  using ME21N
    2.     Create Outbound Delivery using VL10B
    3.     Create Billing Document using VF01
    4.     Create Excise Invoice using J1IIN
    5.                   GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Decimal values are not flowing to Excise Invoice created in J1IIN

    Dear Sap Gurus,
    Please help me with the problem. After creation of invoice in VF01 when i am creaing outgoing excise invoice decimal values for BED, ECS and SEC. ECess( AT1) are not coming instead values are rounded of to nearest whole number.
    for ex.
    if invoice values are as below
    BED= 16
    ECS= 3.2
    HSC= 1.6
    when excise iinvoice is created values are changes as below
    BED= 16
    ECS= 3
    HSC= 2
    please give propeer solution
    reg.
    suresh

    Check in Logistics - General -> Tax on Goods Movements -> India -> Basic Settings -> Maintain Company Code Settings. 
    Also ensure that in V/06, for the respective excise condition types, rounding is not activated.
    thanks
    G. Lakshmipathi

  • AED and SED values are not flowing into Order

    Dear Gurus,
    We are using ECC 6 and TAXINJ. We did all the CIN configurations to the best of my knowledge. JMOD is flowing normally. But AED & SED are not. UTXJ is coming as also JIN6 (VAT), E Cess and S&HECess. We dont have Cess in the client's company, so Cess is not to be considered.
    If a check list can be given, maybe I can check my customization with it, since I am an SD consultant and alot of things are involving MM too. Unfortunately we dont have any MM guy with us for the time being.
    Any answers are most welcome.
    Thanks and regards.
    Venkat - Hyd.

    Hi,
    Go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults
    Here check whether AED and SED condition types are assigned under columns A/R AED Cond and A/R SED Cond respectively. If not then assign and check.
    Also check in FV12 for the Tax Code used whether condition record has been maintained as 100 % for AED and SED conditions. If yes then check in J1ID, for "Excise Tax Rate", maintain rates for AED and SED.

  • CO-PA- Actual Values are not flowing in the CO-PA

    Hi ,
       I have created an operating concern and created the characteristics and value fields as per our requirement. I have assigned a particular cost element to a value field through FI direct posting .
      I have mapped SD Condition types to my value fields
      I have also activated the Operating Concern
      Now when i  am tryinng to post the document from FI no CO-PA document is getting generated nor the actuals are getting transferred to the CO-PA.
      And when i am trying to post a document from FI to Profitability Segment (through account assignment) iam getting following dump.
    The current ABAP program "SAPLKEET" had to be terminated because one of the
    statements could not be executed.
                                                                                    This is probably due to an error in the ABAP program.
                                                                                    In program "RK2FGPKE ", the following syntax error occurred
    in the Include "RK2FGTKE " in line 23:
    "The Dictionary structure or table "T25A2" is either not active or does"
    " not exist."                                         
    But I have already created a segment as my characteristics and i have created a segment for my operating concern and I have checked that this is getting stored in table T2509.
    I have checked with the table T25A2 it is not activated .
    Can anyone suggest am i going wrong in the customisation part.
    how do i solve it plz assist me as early as possible.
    Regards
    Sunil

    hi sunil
    as per ur mail this problem is occured in table space . kaindly consult ur BASIS onsultant first. based on that ask the ABAP ER . some times it will happen if any oracle applicastion not works

  • Characteristic Values are not updated in COPA Report

    Dear Gurus
    I have created one characteristics  and derive the value out of derivation rule but the same is not appearing in the COPA Report even though I mapped that Characteristics in my COPA Report.  Please advice and help.
    Sivakumar Subramanian

    Dear Jayaram
    While creating the Derivation Rules I checked the derivation is working fine or not by giving the inputs and it is working and no error in deriving the characteristcis.
    Please help.
    Sivakumar Subramanian

  • Service order/confitimation - plannedvalues/actual values  or not flowing

    Hi All,
    When I am creating a Service contract in SAP CRM an internal order is created with planned values but when I am creating a service order/service confirmations and assigning it to a contract t the planned values/actual values are not flowing on to the internal order
    Can you please let me if any specific configuration is missed or required for the above scenario?
    Thanks
    SK

    closed

  • COGS Value not flowing to COPA

    Dear ALL
    I am trying to post COGS/COGM to COPA, All revenues and discounts getting flow to COPA but COGS/COGM is not updating in COPA
    Please any one send me solution
    Thanks in Advance
    Hemant

    Dear Hemant,
    Check whether you have maintained Standard average price in Accounting view of Material Master Record. You need to maintain Condition type VPRS in Pricing Proceedure with subtotal as B and Requirement as 4. Once you maintain this data will flow to COPA. and also Consult your SD Consultant.
    Thanks and Regards
    MBS

  • Values not flowing to COPA - PO with Acctt Asgnmt Cat-Ind. Cust. w/o KD-CO

    Dear Friends,
    The users have created a PO with Acctt Asgnmt Cat as "Ind. Cust. w/o KD-CO" while mentioning the Sales Order and GL Account No. in the PO. The GL Account No. defined is that of Inventory Account (Balance Sheet). The issue is that at the time of Invoice Verification, the price was different from the PO value and the difference in the price got debited to the COGS Account, However, even though there was a reference to the PO, while posting the difference to COGS, the system did not create the Profitability Segment and thus the value did not flow to the COPA. But the basic costs debited to COGS at the time of GR has flown to COPA.
    Could any one help in understanding this, is this the normal behavior, and was it correct to mention the Inventory GL in PO instead of COGS A/c.
    Regards

    Hi
    1. I asked you which CO object it is posting to upon PRD... Profit center is not a CO object if the cost element category is 1....
    Your COGS should be ideally Cost Ele Catg 1, which means without a Cost Center, IO or WBS you can not post..
    2. As you say, COGS is flowing to COPA upon PGI, which means Prf Segment is the Cost Object for COGS account
    Similarly, what is the CO object upon PRD and what is your cost ele category?
    3. If it is 12 instead of 1, may be you can post to Profit Center also.. But system gives a warning message KI 166 Enter a true account assignment object with revenues.. You should convert it into Error in OBA5 so that you wont be able to post without a True CO Object
    *4. The notes which I mentioned are both for flowing COGS as well as PRD into Costing based COPA*
    Regards
    Ajay M
    Edited by: Ajay Maheshwari on Oct 14, 2010 10:35 AM
    Edited by: Ajay Maheshwari on Oct 14, 2010 10:36 AM

  • Billing document are not flowing into FI and COPA

    Hello SAP CO gurus,
    please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
    what are the settings need to check?
    is there any option to get release by manual?
    Initiatives rewards with points........
    Regards
    Chandra.

    Hello Chandra,
    Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
    I am also working on the same issue but not solved yet.
    regards
    Nivas

Maybe you are looking for

  • Members edit only their page, no other areas?

    Hi, I am working at a membership based site, and want each member to have access to their own page -- and the editing of that page. But am confused on how to set that up: 1) set up their own page in muse, www.hellohorse.com/joe-smith 2) set up in-bro

  • Problem when starting an object in UWL

    Hi, Does anybody knows if it is possible to configure a workitem so that the object isn't visible ? Or to configure the UWL that only for tasks (not for notifications ! ) the object/attachment isnt 't visible ? Till now every solution we have found w

  • Web gallery syncing (Aperture 2)  - Why does it resend all images?

    Hi All, I have a number of web galleries, many of which I like to continually update as I make new photos. But when, for instance, I want to add a single photo to a gallery that already contains 50 images, I tell it to synchronize the gallery, it upl

  • Adding EXIF Fields to Aperture - possible?

    Hello all, I would like to add to the EXIF fields that aperture displays.  I know that you edit the Metadata views, and check the various Metadate Fields on and off, but I would like to add Metadata that my camera records in EXIF that aren't listed. 

  • Finder Icon View Isn't Remembered

    This is frustrating me a lot. I like using icon view in Finder, but now it never remembers it and keeps going back to column view. The column view as deafult button in finder prefs is not checked, I tried erasing the .plist file for finder prefs, and