Color and size changed when upgraded to photoshop CS5

Hi, I created a flyer in an older version of photoshop and when I upgraded to CS5 the colors and print size changed. This is particularly distirbing b/c this is a flyer/advertisment for work that was almost at the final stage. They are quite small changes, but changes that need to be corrected just the same. The colors look different (duller) on the screen and in print while the size became smaller when I print (to pdf and the printer). My print settings are the same as before as are my color settings (CMYK). I am fairly new at creating flyers in photoshop, so I am hoping this is a simple fix. Thanks.

Are you 100% certain you are using the same color profiles throughout? That print size issue might be specific to your printer driver... CS5 has a completely rewritten print handling which may not correctly cooperate with your printer driver or conversely the driver might need to be updated...
Mylenium

Similar Messages

Why does color of image change when imported to Photoshop

When I import or edit my Lightroom image into Photoshop the color tones of the image change to a darker tone.
I'm using the same screen.
What can I do to correct this?

Thanks for both responses .
I tried changing the export settings but still get a different color image rom the one I get in Lightroom.
Also, the monitor was recently callbrated, so could the answer be in PHOTOSHOP's color management settings?
When I checked PS's Color Settings window the " Working Spaces" setting was at "sRGB"...
and
Color Management Policies @ "Preserve Embedded Profiles
My first export from LR was also @ sRGB.
Any thoughts on some common settings that might put this right?
Thanks again.

Color and Contrast Change when opening pictures in PhotoshopCS3

I just calibrated my monitor { Mac book 15 inch Pro} using Display Calibrator assistant. I used the Expert mode. I normally had it Calibrated with HUEY PRO. I was not liking my print results with Huey. So I matched the print to the new calibration using Display Calibrator. Now that the pictures match. I go to open one in Photoshop CS3 and the picture darkens, more contrast, and high in Saturation. I can view the picture in photoshop and see it in Bridge at the same time and they are dramatically different. I have all my color spaces set in photoshop the right way using the SRGB for working and that is the format I Shoot in. I have not changed anything except the new monitor calibration. Any one know what could be happening? THanks!!!

Now that the pictures match.
Which pictures match?
Are the profiles embedded in the images?
What are the Color Management Policies?

Why do the relative values of RGB and CMYK change when switching between Photoshop and InDesign?

I'm trying to put together a Colour Guide for my company's brand guidelines.
I initially worked from InDesign and wrote down all the H, RGB, and CMYK values that I got when I eye-dropped my original colour palette.
However when I put the same RGB values into Photoshop- I am given a (slightly) different set of CMYK numbers from those that I had originally documented in InDesign.
Why is this???

Jamie,
in Photoshop go to Edit > Color Settings and choose your parameters:
For RGB: sRGB or AdobeRGB (1998)
For CMYK: the process as recommended by your printer (person, company)
For offset printing this is here ISOCoated-v2-eci and elsewhere for instance SWOP.
For digital printing you should ask the company as well.
For Grayscale: Gray Gamma 2.2
For Spot: probably irrelevant in the moment. Dot Gain 20%
Everything as shown here:
For your application I've modified my settings a little, therefore we can see top left 'unsynchronized'.
In InDesign do practically the same, but there are no settings for Grayscale.
You'll find for any topic explanations if you move to by mouse (position the pointer over ...).
The field 'Settings' shows not 'Custom' but the file name of a configuration which had been previously saved
and then loaded (buttons top right).
Further explanations on request. It would be quite useless to explain everything now at the same time.
The colors will be wrong if the settings are not synchronized. Above they are explicitly synchronized.
Because Bridge was not used, the system considers them as 'not synchronized', which doesn't matter.
Best regards --Gernot Hoffmann

CustomTaskPane Title font size changed when upgrading from 2010 to 2013

I just upgraded my Word project from Office 2010 to Office 2013. The title of my task pane has changed font size considerably. Is there anyway to control the font size of the custom task pane title?
taskPane = Globals.ThisAddIn.CustomTaskPanes.Add(new Ey.Wpp.Word.Controls.WppDocTreeControl(), "WPP Report Pane", ctx.Window);

Hi Jeffki123,
I can reproduce it as you describing. Based on my understanding, the task pane is drawed by Word applicaiton, the Word applicaiton need to make task pane fit the current version of Office.
>>Is there anyway to control the font size of the custom task pane title?<<
No. As far as I konw, we can only change the size and postion of custom task pane. You can get more detail about the task pane from links below:
Custom Task Panes
CustomTaskPane Interface
I suggest that you submit the feedback from link below, if you want to Word expose this function to enable change the font size of custom task pane.
Submit Feedback - Microsoft Support
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

DVDSP3: Subtitle-fonts and size changes when re-opening project

Hi,
got problems with subtitles: When specifying a subtitle for helvetica 24pt, then closing the project,working with - lets say - photoshop, the font-type changes in this subtitles to the last used font in photoshop.
What is this behavior?
I specified the type of font for the subtitle in the Text-Menu from DVDSP.
thanks in advance,
thommes

And a thread here, too: Project opens random sequences

I have lost the ability to change fonts,use color and size and when I try to write anyone,I cannot see my mailing list and there is no send button.

A few months ago my ability to use different fonts, colors and sizes suddenly disappeared. These choices were always available when looking at my email and I used them regularly . No one I asked ever heard of such a thing happening. I left it alone until I found someone to help. Then, a few days ago, when I clicked "write" , two things happened. First, I could not forward, reply or even see my collected email addresses. Second, there was no longer a place that said "send". My email page filled the entire screen and when I scaled it down, there was still no way to see my list or to send. I am a novice when it comes to fixes and terms but, I have asked people who have some experience with PC's they were stumped. I contacted Fairpoint and they said it must be a Thunderbird problem. Most of the people I asked said they didn't know Thunderbird. One suggested that I reinstall T.bird but, said I also might lose everything on my PC. I would appreciate any help you can give. Thanks, Jim

When you click Write and open the new message editor, press Alt to show the Menu Bar, then enable all the toolbars under View/Toolbars. Plus, press F9 to show the Contacts sidebar.

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

Camera raw 8.7 color and contrast shifts when file opened in ps 6

camera raw 8.7 color and contrast shifts when file opened in ps 6

Thanks ssprengel for the suggestions and running a side by side yourself. I went through all my settings and applied your suggestions and did a side by side each time. I even uninstalled the entire creative suite on my system then reinstalled and updated and I still get the same outcome. It was fine yesterday with the previous version of ACR. It seems like the updated version is not showing the image preview in any color space. When I switch the color space in the workflow options the histogram changes but it doesn't seem to affect the preview window. And yes the preview button was checked on it was just when I was using the screen grab tool in windows it took focus away from the application so that is why the settings appear grayed out. I have attached more screen grabs below illustrating all my settings. Also here is some system info if anyone out there has a similar setup and would be willing to test.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1

Visited link color is not changing when there is no page redirection

Visited link color is not changing when i just open a popup on clicking the hyperlink.. whereas visited link color gets changed when i redirect to a new page on clicking the hyperlink
I want to have my visited link color to change even if i show a popup on clicking the hyperlink
This works fine with IE..

Hi,
Have a look at the user status table TSOCM_STAT_PROP and see if there are any unwanted PROCESS_TYPE <> STSMA combinations.
For your process type there should only be one kind of status schema assigned.

Hyperlink color doesn't change when hovering over link

I create hyperlink, color I select for hovering over link works fine. But sometimes when I publish to my website the link color does not change, but the link works ok. I go back to my mac and check, sure enough the color changes just fine. I wipe out the link and reinsert new one. Works fine on the mac, but when I publish, color does not change when hovering. Help.

Welcome to the discussions. This is a long shot, but try clearing your browser's cache and reloading the page — then see if the color changes when hovering. ( In Safari, click on the Safari menu and choose +Empty Cache...+ )

Why display hanging and software problem when upgraded to ios 8

Why display hanging and software problem when upgraded to ios 8

Hi Redhazel,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you're experiencing a poor image quality with your iPhone's camera, please follow the troubleshooting below.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
iPhone: Hardware troubleshooting
Cheers,
Alex H.

My font sizes change when I send e-mails from Apple Mail.

My font sizes change when I send e-mails in Apple Mail. Sometimes the font style changes, too.
This is unacceptable, as I use my e-mail for business applications.
Any suggestions for a fix?
Thank you.

Before you do that I must warn you that also with PC is the same.
It's not the hardware nor the software that makes the difference, because e-mail must obey to certain rules that is RFC.
Maybe what you are looking for is a message that looks like a web page.
You can find something of that kind here.
http://www.jumsoft.com/stationery/
But again, the recipient e-mail could have little differences from the original that depend on many variables
If you are curious enough to know a little more about electronic mail you can read this page
http://en.wikipedia.org/wiki/Email
P.S.
IMHO you already have the best in Hardware and software. It would be a pity to give away that gem

I have photoshop CS5 and I want to upgrade to Photoshop CS6

I have photoshop CS5 and I want to upgrade to Photoshop CS6

DUPLICATE THREAD
You have a reply here:
I have photoshop CS5 and I want to upgrade to Photoshop CS6

Color and density changes DV MPG-2

Ever wonder about what color and density changes may be taking place in your video clips as they go from DV to MPG-2?
The bottom line: there are slight changes going from DV to MPG-2 that darkened most of the patches, but the changes (although noticeable) are VERY SMALL.
If you want to review my experiment and see an image showing the changes, go to: http://homepage.mac.com/profpixel/color_bars/colorbars.htm
I hope at least a few of you find the experiment interesting. Let me know.

bump....

Color and size changed when upgraded to photoshop CS5

Similar Messages

Maybe you are looking for