Colours different on object and inspector

Hi,
For most colours, there seems to be a subtle difference in the appearance of the fill colour of an object, and the colour for the object shown in the inspector/colour chooser. The object shown on the page has more saturation or brightness than in the floating palettes.
This is immediately noticeable to me on the default green colour for a new object from the toolbar menu (eg. a new circle). In fact, if I click the magnifying glass on the colour palette and click my object, even though they're meant to be the same colour, both the inspector and object change colour slightly, proving that it's not just my eyes. I can repeat this again and again on the object of default green fill until the object is bright green (green starts on 183 of RGB and ends up on 255.)
The problem is the same with text and lines in Pages, but this does not happen in TextEdit. Text copied directly from TextEdit into Pages has a slightly different color.
Does anyone else experience this? Any fixes?
Thanks

This was brought up in the Keynote forum quite some time ago, compllete with a handy demonstration by Kyn.
I would suggest sending feedback and seeing if it shows up in keynote too. If it doesn't then it was a missed fix in color handling that was not forwarded to the Pages team.

Similar Messages

How can I apply a timestretch to different null objects and then use them to parent layers?

I am using several hundred stills which are held on screen for different lengths of time. Is there a way to create null objects with various timestretch values and then use them to parent my stills?
I'm trying to find an equivalent to the 'paste attributes' function in Final Cut Pro.
Thanks in advance
A

If you have movement on the stills you can set up expressions based on in and out points. That's what I do. I then drop all my stills in order into a comp then set the out point for all stills for the longest duration. I then set group colors for layers that I want to make different lengths, do a group select and then adjust the out points for those layers. When I'm done I sequence the layers using the keyframe assistant.
The other way I work is to use an audio track with markers for timing. I have an expression that reads the markers and sets opacity for the layers based on pairs of markers. The motion is also controlled by expressions. That's an even faster way to set up an animated slide show.
The last way I work is just to set in an out points for all layers, sequence the layers, use expressions to do the motion and then use time remapping on a pre-comp to adjust the timing of the slide show. All methods are quick and easy.
Here's a fly in bounce and then drop out fxx preset that will give you an idea of how expressions based on in and out point work for slide shows. You just drag the layer to it's resting position, apply the animatiokn preset and the layer flys in, bounces, and then drops out the bottom of the comp. Works in 2D and 3D space.

Keep specific colour of an object and make everything else b & w... help :(

how do I keep the colour of, say a football, in red and make everything else in the clip black and white?

Kevin Brock wrote:
stuckfootage wrote:
http://www.lafcpug.org/tutorials/basicpleasantvillelook.html
Man, if I only had a $ for each time this link was shown to someone on this forum.
<chuckle> Googling around, there are lots of explanations how to do this
effect online, but I think the LAFPUG page is the easiest to understand.
That's the nature of these forums, that people keep asking the same
questions over and over.

Mapping in interconnect between different Business Objects

I want to know how to do transformation and mapping between different business objects in interconnects.
Always,We have a very complex SQL,when We do intergration
with Oracle interconnect ,We use DB Adapter or Jdbc Adapter,but the complex SQL have to be excuted in the resource DB or the destination DB which may be a big pressure to them ,I think can We use different Business Objects, and do the Mappings in interconnect,so the big pressure will be on the interconnect server just like the ETL tools, But I just find that Interconnect can do tranformation and mapping in one Business Object ,how can I do? Is anyone meet this problem like me ?thanks for discussion.

For me, Business Objects are logical groupings of business processes. For example, we have a Business Object called "Maintain_Employees". Under this we have 1 Procedure (Create_Employee) and 2 Events (Update_Employee and Delete_Employee).
We have 1 Oracle system interfacing with 23 other legacy systems. Some of these legacy systems will be using this "Maintain_Employees" Business Object (Common View), and our main transformations will be between the Common View and the legacy Application Views.
We are using a number of techniques to assist in "validating" data in the InterConnect. The main ones are using 'Cross Reference Tables (XREF)' and 'DatabaseOperation' transformations. By using 'Content Based Routing' we are able to send the right message to the right legacy system, and therefore do the right transformation/validation on the message payload. However, this is only a small part of a complex puzzle.
I also have the "problem" of having "very complex SQL" on our Oracle system too. This is not unusual when using the InterConnect.
To my mind, the InterConnect does 2 main operations. Firstly, it performs some message transformation (mapping), and secondly, it acts as a transportation engine (routing) using the adapters.
The remainder of the effort required to create or consume the message resides with the Applications themselves. Whether it is parsing an XML CLOB payload, inserting data into staging tables, writing to log files, pre-processing data, calling API's or something else, your Application side programming and processing overhead can get large.
The trade off it to ask the question, do I want to be able to track and manage messages from start to finish in high detail? Or can I trust that all message payload data will be consumed with no additional processing on the Application side?
My experience has shown that the bottleneck is always at the Application side, and almost never in the InterConnect.
The short answer to your first question is "You are right. Mappings can take place only between Application Views and Common Views only - not between Business Objects.".
To answer your second question "Probably everyone reading this forum has this problem. The intelligence that is able to really interpret message data, validate it and process it is only found in the Application, not the InterConnect. You could, however, use the Workflow engine within OAI in order to provide additional pre-validation, human interaction and logic, but this too could be complex."
At my current client, we are architecting an Application OAI Message handling schema. This will contain staging tables, pre-processing tables, "OAI" wrapper PL/SQL scripts, "APPS" wrapper PL/SQL scripts and Message Logging and Exception tables. Ours will be a complex set of PL/SQL processes too.
I hope this helps, just in letting you know that you are not alone with this problem.
I wonder if anyone else would like to share how they have architected their InterConnect and Application side mapping and transformation solutions.

Illustrator CC text colour prints different to object colour

Hi there
Im having an issue in Illustrator CC where text is printing a different colour to an object. Both are using the same cmyk colour and look identical on screen but when printed the text is much lighter.
If the text is converted to outlines it prints fine. There is no transparency or tint applied. I've tried a few different colours, tried back-saving and converting to pdf, same problem. Will now check our printer settings but in the meantime, has anyone had this problem?

Here it is with the appearance options shown
There is only one lay with the box (which I eyedropped color from) and the text. In this image I selected both of them and its saying they are both blue (if the text was black than a question mark would be in the pallet instead of the blue)

Drag and drop between different Flash objects

It is possible to drag & drop items between different flash objects?

Yes, you can drag and drop anywhere on the stage. You'll need to explain things in more detail if there's more to your question.

Different _scope parameter of Enqueue_ lock object and Dequeue_ lock objec

Hi, all.
When we create lock object and generate enqueue_<lock object> and
dequeue_<lock object>, the default value of _scope is
enqueue : _scope = 2(update owner only)
dequeue : _scope = 3(for both dialog owner and update owner).
Does anyone tell me the reason of this different default values?
i read help.sap.com - lock related help but i couldn't get the idea
of these different default values between enqueue and dequeue.
Best Regards.
Sejoon

Hi,
When you use ENQUEUE, the owner is going to lock that record. So at that time, the only person who can modify the record in the one who has locked it using ENQUEUE. So only he needs to be informed.
Whereas when you use DEQUEUE, the owner who has locked the record and processed it + the 2nd user who wants to lock it needs to be informed. Hence it is to update the 1st User(who has done the update and planning to release the lock) + 2nd User(who wants to do the update and planning to lock the record ).
Best regards,
Prashant

NodeIterator Objects different in ChangeAwareClassLoader and bootloader?

I have an application that does xpath stuff, and just got an error
java.lang.LinkageError: loader constraint violation: when resolving method
"com.sun.org.apache.xpath.internal.XPathAPI.selectNodeIterator(Lorg/w3c/dom/Node;Ljava/lang/String;)Lorg/w3c/dom/traversal/NodeIterator;" the class loader (instance of weblogic/utils/classloaders/ChangeAwareClassLoader) of the current class, com/guidewire/pl/system/database/dmv/DMVPlan, and the class loader (instance of <bootloader>) for resolved class, com/sun/org/apache/xpath/internal/XPathAPI, have different Class objects for the type org/w3c/dom/traversal/NodeIterator used in the signature
If I understand this error correctly, one classloader loaded a NodeIteratorImpl class that is different from what the other classloader is trying to load.
In my app I have xercesImpl.jar, but where could the other implementation be? And.... how do I fix this problem?
Thanks!
Randy

Hi,
 If you have EAR application then 
You can put the following Jars inside "APP-INF/lib"
serializer.jar
xalan.jar
xercesImpl.jar
xml-apis.jar
Then add the following entry inside *"META-INF/weblogic-application.xml"*
 <prefer-application-packages>
 <package-name>org.apache.*</package-name>
 <package-name>org.apache.xerces.*</package-name>
 <package-name>org.apache.xalan.*</package-name>
 <package-name>org.apache.xmlcommons.*</package-name>
 <package-name>org.apache.xerces.jaxp.*</package-name>
 </prefer-application-packages>
= = = = = = = = = =
 If you have WAR application then 
ThenPut all the above Jars inside "WEB-INF/lib" directory and then add the following entry inside *"weblogic.xml"*
 <container-descriptor>
 <prefer-web-inf-classes>true</prefer-web-inf-classes>
 </container-descriptor>
For more information on These Tags and Filtering ClassLoaders...please refer to: http://jaysensharma.wordpress.com/parsers_issues/
Thanks
Jay SenSharma

What is different between conflict object and lingering object in AD

Hi
I found lots of conflict object in my Forest on AD 2k8R2 with FFL & DFL 2k3 with dsquery filter "(name=*\0ACNF:*).
But Only I can see 4 to 5 AD object in ADUC.
How can I found others.
Also these conflict object are replicated with AD replication? and due to these conflict object, can be any issue in AD replication like slow replication or delay replication?
If I delete them then how can I delete and which command or tool like LDP?
Also Is conflict AD Object and lingering objects means are same?
Please suggest and guide..
See below link of my conflict object ..
http://sdrv.ms/19DUTbi

IT means... If I don't find duplicate or conflict object in ADUC then I no need to worry about it as after AD tombstone lifetime period, these conflict object would be delete automatically ...?
Conflict objects can be duplicate or lingering objects both & you need to worry. Consider an example, if you have a system named abc & you try to join another system with the same name from other site DC where connection b/w other DC's are down &
ABC information is not present in that local DC, it will allow you to join system in the domain with the same name, then the object joined later vl have CNF added.
Another case, two new systems are joined together from two different AD site with the same name, it will allow you to join & once replication occurs, you will find duplicate name with CNF.
Same problem happens, when you connect old DC which has crossed TSL. WHat happens here is you have most recent DC with the deleted objects, when you connect old DC which has not received replication & crossed TSL, again during replication, you will see
objects with CNF which will be lingering objects.
So, CNF objects can be duplicate & lingering objects both & in both the case, i'll worry. Lingering objects are not visible directly, you can find out using repadmin tool. It is really complex to clean them if they exists in the ready only partition
of the GC.
http://technet.microsoft.com/en-us/library/cc738018%28v=ws.10%29.aspx
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

ArrayStoreException in WLS 8.1SP3: Object and inner type of array differs

Has anyone seen this? We seem to get them from time to time, am running WLS 8.1 SP3 on JRockit 1.4.2.03. Stack trace follows.
 cheers
 dim
 <BEA-000802> <ExecuteRequest failed
 java.lang.ArrayStoreException: Object and inner type of array differs.
 java.lang.ArrayStoreException: Object and inner type of array differs
 at weblogic.rjvm.BasicOutboundRequest.sendReceive()Lweblogic.rmi.spi.InboundResponse;(BasicOutboundRequest.java:108)
 at weblogic.rmi.internal.BasicRemoteRef.invoke(Ljava.rmi.Remote;Lweblogic.rmi.extensions.server.RuntimeMethodDescriptor;[Ljava.lang.Object;Ljava.lang.reflect.Method;)Ljava.lang.Object;(BasicRemoteRef.java:137)
 at weblogic.cluster.replication.ReplicationManager_813_WLStub.update(Lweblogic.cluster.replication.ROID;ILjava.io.Serializable;)V(Unknown Source)
 at weblogic.cluster.replication.ReplicationManager.updateSecondary(Lweblogic.cluster.replication.ROID;Ljava.io.Serializable;Ljava.lang.String;)Ljava.lang.Object;(ReplicationManager.java:811)
 at weblogic.servlet.internal.session.ReplicatedSessionData.syncSession()V(ReplicatedSessionData.java:490)
 at weblogic.servlet.internal.session.ReplicatedSessionContext.sync(Ljavax.servlet.http.HttpSession;)V(ReplicatedSessionContext.java:184)
 at weblogic.servlet.internal.ServletRequestImpl.syncSession()V(ServletRequestImpl.java:2471)
 at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl;)V(WebAppServletContext.java:3679)
 at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread;)V(ServletRequestImpl.java:2630)
 at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(ExecuteThread.java:219)
 at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
 at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
 Caused by: java.lang.ArrayStoreException: Object and inner type of array differs
 at java.io.ObjectInputStream.readObject(Unknown Source)
 at java.util.HashMap.readObject(Unknown Source)
 at java.io.ObjectInputStream.readSerialData(Unknown Source)
 at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
 at java.io.ObjectInputStream.readObject0(Unknown Source)
 at java.io.ObjectInputStream.readSerialData(Unknown Source)
 at java.io.ObjectInputStream.readObject(Unknown Source)
 at weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:120)
 at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:117)
 at weblogic.cluster.replication.ReplicationManager_WLSkel.invoke(Unknown Source)
 at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
 at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
 at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
 at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
 ... 3 more

You have to be careful how you define your complex elements, define complex elements outside of the root element or in a seperate file and reference them.
 While the following is syntactically correct, in weblogic you will result in the error you had previously
 <element>
 <complex type>
 </complex type>
 </element>
 Instead do
 <element type="ir:ComEx">
 <complex type name="ComEx"></complex type>
 outside of the root element
 Had this exact same problem today, this is how I fixed it

Wanted: Script to duplicate objects and apply colours

Hi
I am looking to pay someone to write a script which can duplicate objects and apply colours.
I have a full break down of the project together with a Illustrator Action that demonstrates the functionality of the required script.
If you are interested, please email [email protected] for full details.
You can also send me a private message.

big_smile wrote:
- script which can duplicate objects and apply colours.
- Illustrator Action that demonstrates the functionality of the required script.
Can you post a screen shot of the resulting outcome, derived from your current action, so we can see the desired result?

Export to PDF and print same swatch colour - different variation of colour on printouts

I have multiple documents - they are all set up the same way.
I have 2 or 3 swatches in each of them -namely Rubine Red is giving me an issue - this is the same swatch in every document!
===============
The Swatch
===========
Colour Settings
Here are my Colour Settings - the exact same in every document - I have also used the "Convert Profiles" and made sure all are the exact same.
=================
Export to PDF
When I export to PDF - the export looks great - and the coloured frames all look the exact same - and they give the exact same colour read outs in any profile I look at in the Preflight Manager
The CMYK Reading is 4/99/20/0 in all boxes
====================
The printed result
==================
Same colour settings
Same swatch and same swatch values
Same PDF export options
Same swatch values on output
Only 1 file prints the correct colour throughout
====================
PDF export settings
Test File
Can anyone help me with this?
The printer I am using is a XeroxColorQube using PS driver.
Windows 7
Adobe InDesign CS5.5
Fully updated

I've also exported the document to IDML - and I've unzipped that folder. I've read the information for the colour - there's only 1 reference to Rubine Red and that's giving the same percentages as the InDesign file.
I don't know where the 2nd shade of pink is coming from.
But I suspect that it's from the print driver itself.
Also - just occured to me, I lost my PDF settings a while ago, InDesign crashed and the PDF defaults were missing - I dowloaded a copy of a set from someone on these forums through a google search.
But I no longer have PDF x4 export option - where can I retrieve these.
How can I restore the original PDF settings for InDesign?

Resizing objects and groups in CS4 - different from CS3

Hi all,
In CS3 I used to be able to resize objects or groups of objects by just using the solid select tool and just grabbing a corner or side of the object and resizing it. That doesn't work in CS4. Doing the same thing only moves the image around. I have to actually use the scale pop-up.
I can still do the same thing an anchor or path at a time with the outline select tool.
I'm sure there's a way to do this in CS4 and there's probably a switch buried deep in some menu to allow this, but darned if I can figure it out.

I'm still on CS3 so I don't know for sure, but I don't think so. It's always been a pretty easy key shortcut to hit by accident though.

Tidying up objects and listeners (basic)

A newbie wannabe-AS3 question. My difficulty is (I think)
removing unwanted objects and listeners as I move from one mode to
another in my project ... altho my difficulty behind that is
probably inadequate understanding of Display List basics.
In one 'mode' of my project I have generated the following
structure:
1.... Sprite ("reviewPage");
2a......... Some graphics on reviewPage
2b......... TextField ("commentBox");
2c......... A number of Sprites ("displayCard_1",
"displayCard_2", ... "displayCard_n");
3a............. Some graphics on each displayCard;
3b............. Several EventListeners on each displayCard
(e.g. displayCard.addEventListener(MouseEvent.CLICK,
gotoReviseCardMode, false, 0, true))
3c............. TextField ("questionBox_1" ...
"questionBox_n");
3d............. TextField ("equationBox_1" ...
"equationBox_n");
3e............. TextField ("answerBox_1" ... "answerBox_n").
One of the eventListeners attached to each displayCard Sprite
calls a function intended to tidy-up the unwanted objects and
eventListeners and then shift the activity to a different mode,
defined by another function.
There is only one child on the stage. I assume this will be
my reviewPage with all the objects it holds. However when I trace
it, and it's name, I get "root1 [object MainTimeline]". Using
stage.removeChildAt(0) removes all the visible objects from the
Display List and leaves me with no children on the stage.
I've tried to 'explore' my structure by writing a small
function to identify each object/container and the hierarchy of
objects attached to them ... but have as yet been spectacularly
unsuccessful in that effort and overwhelmed with error messages.
I have a couple of concerns / questions:
1. Do I remove all the eventListeners when I
stage.removeChildAt(0)?
2. Do I still need to remove these objects from memory? If
so, how? How can I explore what listeners and objects are using
memory after I've attempted a clean-up like this?
3. How do I remove just one of the TextField objects, say
answerBox_212, or one of the eventListeners attached to one of the
"displayCard" Sprites, from the Display List and/or from memory?
Any guidance would be greatly appreciated.
Cheers
Dougal

Hi John,
Many thanks for your reply, where can I find out what the default setting is? In the style sheet, margin is set to 0. Do you mean the on the first line of text? The code for that section is below, do I not need the ?
<h6>Heding 1</h6>
 An image placeholder was used in this layout in the .header where you'll likely want to place a logo. It is recommended that you remove the placeholder and replace it with your own linked logo. 
 <h3>Logo Replacement</h3>
 Be aware that if you use the Property inspector to navigate to your logo image using the SRC field (instead of removing and replacing the placeholder), you should remove the inline background and display properties. These inline styles are only used to make the logo placeholder show up in browsers for demonstration purposes. 
 To remove the inline styles, make sure your CSS Styles panel is set to Current. Select the image, and in the Properties pane of the CSS Styles panel, right click and delete the display and background properties. (Of course, you can always go directly into the code and delete the inline styles from the image or placeholder there.)
Many thanks for your help.
Regards
Nick

Colour inconsistency between mac and pc

Hi
Both my colleague and I use cs4 to create websites. He designs on a mac and I use windows xp. We are having difficulties getting our hex colours right.
He normally creates a psd and then I get to use it to develop the website.
He creates a green square and then uses the pipette tool to get the hex. He exports the green sqaure as 100% and puts it into a simple web page which has a green back set to the hex above.
On his mac you can't see where the square is - ie its the same colour as his background.
On my pc you can see the sqauire???
I know macs/pcs display colours differently.
What do we need to alter so that both pc and mac can't see the sqaure?
Thanks in advance
Edward

If you DO go with a PC you might be better off with a desktop than a laptop for Photoshop use. A. Photoshop uses a system more aggressively than most applications, and B. Laptops don't get as good display driver support because usually drivers have to come through the laptop maker vs. directly from the display adapter company.
With Mac systems your drivers come through Apple anyway, so the B section above doesn't apply.
In my humble opinion Apple generally makes better laptops (hardware/reliability wise) than any of the PC companies. I hope I don't insult anyone who loves their PC laptop with this statement; it's just opinion. Apple's prices are generally higher for similar performance to pay for that fact.
-Noel

Colours different on object and inspector

Similar Messages

Maybe you are looking for