COM+ with Oracle 9i

Hi,
I have created a COM+ component which makes a
connection to Oracle 9i database. I get a "No error
information available: XACT_E_NOENLIST(0x8004D00A)."
exception when i try to open the database connection. I am
using OleDB provider for Oracle. I am using Oracle9i client.
I have also made the changes in the registry --
OracleOciLib - oci.dll
OracleSqlLib - oraclesql9.dll
OracleXaLib - oraclient9.dll
When I run the msdtcora test tool I get following report
Calling LoadLibrary on oraclient9.dll.
LoadLibrary on oraclient9.dll succeeded.
Calling LoadLibrary on orasql9.dll.
LoadLibrary on orasql9.dll succeeded.
Calling LoadLibrary on oci.dll.
LoadLibrary on oci.dll succeeded.
Calling GetProcAddress on the Oracle xa_switch function 'xaosw' in oraclient9.dl
l.
GetProcAddress on 'xaosw' in oraclient9.dll succeeded.
Calling GetProcAddress on the Oracle 'sqlld2' function in orasql9.dll.
GetProcAddress on 'sqlld2' in orasql9.dll succeeded.
Calling GetProcAddress on the Oracle 'opinit' function in oci.dll.
GetProcAddress on 'opinit' in oci.dll succeeded.
Calling GetProcAddress on the Oracle 'oopen' function in oci.dll.
GetProcAddress on 'oopen' in oci.dll succeeded.
Calling GetProcAddress on the Oracle 'oclose' function in oci.dll.
GetProcAddress on 'oclose' in oci.dll succeeded.
Calling Oracle 'xa_open' function with the open string 'Oracle_XA+Acc=P/scott/ti
ger+SesTm=440+DB=TEST+SqlNet=rmsvar+Threads=TRUE'.
'xa_open' call failed with the return code = -3.
Does anyone know, do I have to change some settings in
oracle server to handle the distributed transactions. Or it will work with Oracle 8 client?

make sure that your registry setting in client is correct, and these dlls can be found in your \\ORACLE_HOME\bin directory.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC\MTxOCI]
"OracleXaLib"="oraclient9.dll"
"OracleSqlLib"="orasql9.dll"
"OracleOciLib"="oci.dll"

Similar Messages

  • Does Oracle OLAP comes with Oracle Database 10g ?

    1.Does Oracle OLAP comes with Oracle Database 10g or do we need seperate software to have this ?.
    2.If I create a Cube with Analytic work space manager the cube is going to be stored in the Database ( meaning the in the table space where OLAP is Stored).
    3. What is the difference between Analtyic work space manager and discoverer For Olap.
    Help is higly appreciated ..
    Thanks, Prasad

    One thing to point out : The OLAP option is a costed database option, so while this is automatically installed and part of your database you do have to purchase additional licenses to use this feature. You will need to check with your Oracle account manager to see if you are actually licensed to use this feature.
    If you have existing 9i OLAP cubes these can be quickly and easily migrated to 10g OLAP and the documentation explains how to do this. However, there are many new features that are part of 10g OLAP that will improve the performance of your data model that will not be enabled as part of a migration process. Based on my experiences it would be quicker and easier (depending on the size of your existing 9i OLAP cubes) to consider rebuilding your data model using these new 10g features. You should be able to export all the dimensions to XML templates from 9i OLAP and import the templates into the 10g schema and reload your dimensions.
    For the cubes you will probably want to consider using partitioning, composites and compression to provide maximum flexibility and performance for your new data model. There is more information on these features within the OLAP documentation and in the many whitepapers and presentations on the OLAP home page on OTN.
    For moving data from SQL Server to 10g OLAP much depends on the nature of the data transfer. If it is a one-off bulk data load then you could consider using the normal MS command line tools to dump the data out and transfer it to Oracle. Alternatively, you could consider using Oracle Data Integrator to manage the extraction of the SQL Server data and the data load process into Oracle 10g relational tables. If you decide to use Data Integrator this will require additional licenses.
    If you can extract the data from SQL Server to flat files you can use Oracle Warehouse Builder (basic ETL is free as part of the 10g database license) to load that flat file data via external tables. Warehouse Builder can also be used to define your OLAP data model (think of Warehouse Builder as a more powerful version of Analytic Workspace Manager) and provides tools to load the data directly into your OLAP dimensions and cubes. You can get more information on managing OLAP data models with Warehouse Builder the Warehouse Builder home page on OTN.
    There are no facilities to modify Discoverer Viewer to add customisations. You can add company logos, modify certain colors and/or hide certain features but it is not possible to add additional features. You may want to consider using BI Beans to provide this type of environment. BI Beans is the development framework used to create Discoverer Viewer. You can create customised JSP pages that look identical to Discoverer Viewer pages with the added benefit of providing your own specific features. You can get more information on the BI Beans home page on OTN.
    Keith Laker
    Oracle EMEA Consulting
    BI Blog: http://oraclebi.blogspot.com/
    DM Blog: http://oracledmt.blogspot.com/
    BI on Oracle: http://www.oracle.com/bi/
    BI on OTN: http://www.oracle.com/technology/products/bi/
    BI Samples: http://www.oracle.com/technology/products/bi/samples/

  • Procedure Builder does not come with Oracle 9iDS r2 (Complete)?

    Hi All
    I have enjoyed using Procedure Builder - but did not see opportunity to install with the Developer Suite.
    Does anyone know where I could get PB? I am not interested in using the version that comes with Forms 6i...
    Thank you!

    Procedure Builder is no longer a stand alone product.
    You can still edit and debug PL/SQL procedures from inside Oracle9i Forms.
    You might also want to take a look at the PL/SQL development capabilities of Oracle9i JDeveloper.
    It gives you the ability to debug PL/SQL stored procedures and it also has a helpful code insight when you write PL/SQL code in it.
    Check out the Database Development viewlets at http://otn.oracle.com/products/jdev/viewlets/viewlet.html

  • Creating Managed Server for Weblogic that comes with Oracle Service Bus

    I've installed Oracle Service Bus 10.3.
    Weblogic Server 10.3 comes bundled with OSB 10.3.
    Everything is working fine in the Admin Server.
    But when I create a Managed server and try to start it, I get the following exception and server doesn't start :
    ####<Nov 10, 2009 10:24:32 AM IST> <Critical> <Security> <iflmud6dlb5jn> <OSBManagedServer2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257828872747> <BEA-090403> <Authentication for user weblogic denied>
    ####<Nov 10, 2009 10:24:32 AM IST> <Critical> <WebLogicServer> <iflmud6dlb5jn> <OSBManagedServer2> <main> <<WLS Kernel>> <> <> <1257828872747> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
    weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
         at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    I've tried changing the boot.properties file and given clear text username and password, but even this did not change the exception.
    Are there any other security concerns that are to be taken care of while configuring Managed Server for Oracle Service Bus?
    Kindly help.

    How are you starting the manageserver. Is it using command line or using NodeManager from Weblogic console of admin server. Most of the times we start managed server using yourDomain/bin/startManagedWebLogic.cmd (.sh).
    startManagedWebLogic nameOfYourManagedServer adminURL(Ex: http://host:port).
    If you created a managed server at the time of creation of domain itself using custom option, then under your domain root folder, you should see a file named like "startManagedWebLogic_readme.txt" that kind of gives the same above command.
    If you added the managed server later on, to an existing single server domain, then you can use the above command.
    Ravi Jegga

  • Dose OHW come with Oracle Application Server 10g?

    I install Oracle Application Server with two instances (named: AS10131 and AS10g2). ohw.jar is found in:
    \ AS10131\jee2\home\applications\ascontrol\ascontrol\WEB-INF\lib and
    \ AS10g2\jee2\home\applications\ascontrol\ascontrol\WEB-INF\lib.
    Is it means:
    1. Server containers have OHW already?
    2. I only need to implement OHW in my web application (developed iwith Jdeveloper)?

    OHW is not installed by default. You can download it from OTN. (http://www.oracle.com/technology/tech/java/help/index.html).
    The OHW you've found is part of the AS control application only.
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Security vulnerabilities in apache that comes with oracle database.

    Hi,
    We are having a QA database in Oracle enterprise version 9.2.0.4 on OS : OSF1.
    Recently our security team ran a test and found that the apache1.3 that comes as component of Oracle database is prone to security vulnerabilities. Also they suggested to remove the apache or upgrade to latest as remedy.
    When contacted to Oracle support, Oracle team replied apache upgrade should not be done instead latest apache seprately can be installed as reverse proxy. But when asked for steps/document there is no reply. Anyone faced this problem can provide any help/suggestion in this regard.
    I am attaching some of the threads identified by our Security Team for reference.
    1. Apache 1.3 HTTP Server Expect Header Cross-Site Scripting XXXX and YYYYYY ports 7782, 4889, 3339.
    2. Apache HTTP Server 413 Error HTTP Request Method Cross-Site Scripting Weakness
    3. Keep-Alive: timeout=15, max=100
    Connection: Keep-Alive
    Transfer-Encoding: chunked
    Content-Type: text/html; charset=iso-8859-1
    <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
    <HTML><HEAD>
    <TITLE>417 Expectation Failed</TITLE>
    </HEAD><BODY>
    <H1>Expectation Failed</H1>
    The expectation given in the Expect request-header
    field could not be met by this server.<P>
    The client sent<PRE>
    Expect: <script>alert(document.domain)</script>
    </PRE>
    but we only allow the 100-continue expectation.
    -CR

    I dont know how to find which components are using the apache. Help me if there is any way to find it. Only information i can say you is there is no other software installed that in that server other than oracle Database.

  • Does Oracle Internet Directory come with Application Server 10g Release 3

    I noticed Appserver 10g 10.1.3 does not have as many components as Appserver 10.1.2. It does not even come with Oracle Internet Directory. Do I need to install Appserver 10.1.2 first and then upgrade to Appserver 10.1.3?

    Nope. Doesn't work that way. AS 10.1.3 is a different release...
    Perhaps one way of seeing AS is as a family name for sets of application platform products or technology. The "core" of AS is OHS and OC4J + management, for many of the releases or product sets (i.e. not all of the AS family are or were based on OC4J). On top of that core, Oracle adds products depending on the release.
    If you go from the Downloads menu -
    You would see that (currently) 10.1.3.x or 10.1.3.1 ("for deployment" - See All) is e.g a SOA Suite release. It also has Service Registry, Data Integrator and WebCenter Suite.
    AS 10.1.3.0.0 is a OC4J release, if I'm not mistaken, to include support for Java/JDK 5.
    AS 10.1.4.0.1 is a Identity Management release.
    If you are looking for other app server products such as Discoverer or Reports Services, the latest release that I know of is 10.1.2.0.2. If you have AS 10.1.2.0.x, you may upgrade the including products via a patch set to 10.1.2.2 or later. Portal and IM components in this release may be upgraded to 10.1.4.x.
    Also note that AS patch sets might introduce some additional version number confusion.
    Combining different releases into mid-tier and infrastructure services is possible, if you need to stay with the latest features (such as a setup with 10.1.2.x mid-tiers using 10.1.4 Identity management). See Upgrade and Installation guides for information and configuration rules.
    http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
    http://www.oracle.com/technology/software/products/ias/htdocs/101401.html
    http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
    Message was edited by:
    orafad

  • ECC5 Installation with Oracle 10.2.0.2.0

    Dear Experts,
    We want to do a Heterogenous Sytem Copy from our ECC5 system landscape on HP-Unix, Oracle 10.2.0.2.0 to win2003 (64 bit), Oracle 10.2.0.2.0.  Oracle version needs to be exactly same after migration as under this version our Production system will run for some time before we upgrade to ECC6 & Oracle 11G on Windows 2008.
    The PAM says that ECC5 is supported with Oracle 10.2.0.2.0, though not sure if it's supported as a direct Installation to 10.2 or only as a Installation to Oracle 9.2 & followed by a upgrade to Oracle 10.2.  The migration media for ECC5 that we have recieved from SAP comes with Oracle 9.2, so wanted to check if a direct Installation of ECC5 on Oracle 10.2.0.2.0 is supported?. If yes is this Oracle Installation DVD for 10.2.0.2.0 downloadable from SMP?.
    Thanks
    Abhishek

    > We want to do a Heterogenous Sytem Copy from our ECC5 system landscape on HP-Unix, Oracle 10.2.0.2.0 to win2003 (64 bit), Oracle 10.2.0.2.0.
    Are you aware that you must have a certified migration consultant on-site to do the migration? see http://service.sap.com/osdbmigration --> FAQ
    > The PAM says that ECC5 is supported with Oracle 10.2.0.2.0, though not sure if it's supported as a direct Installation to 10.2 or only as a Installation to Oracle 9.2 & followed by a upgrade to Oracle 10.2.  The migration media for ECC5 that we have recieved from SAP comes with Oracle 9.2, so wanted to check if a direct Installation of ECC5 on Oracle 10.2.0.2.0 is supported?. If yes is this Oracle Installation DVD for 10.2.0.2.0 downloadable from SMP?.
    What you need is not an ECC5 installation media but a new netweaver 2004 media containing the support for Oracle 10g, you'll have to do an R3load migration, backup/restore will not work (different endianess source vs. target).
    Markus

  • Does Materialize Views comes with Standard One?

    Hi
    Does Materialize Views comes with Oracle 10g Standard One?
    Regards,
    Néstor Boscán

    Read this discussion: https://discussions.apple.com/message/16215112#16215112

  • What comes with Rapid Install (12.1.1)

    Hi,
    I need to install (from scratch) the latest version of Single Sing-On, Portal, and Discoverer on top of E-Business Suite 12.1.1 with Database 11gR2. I upgraded E-Business Suite from version 11.5.9 and DB 9.2.0.4 (to DB 10.2.0.5 first) using Rapid Install CD for 12.1.1.
    My question is without installing anything new, do I have any version of Portal, Single Sing-On, or Discoverer that came with Rapid Install, if I wanted to live with that and not go to the latest version of these products?
    I know even if Rapid Install comes with above mentioned products, I would need to configure them.
    Also, the latest version of these products apparently comes with Oracle Fusion Middleware 11g, is this correct? Do I need to download any of these separately if I already downloaded the Fusion Middleware 11g? I am trying to identify my starting point.
    Note: I will configure the portal and discoverer from scratch as I don't have anything important I would have to bring with upgrade, so I think this would make the installation easier for me?
    Thanks,
    Sinan

    Hussein,
    I have a 64Bit OS installed on a 64Bit server. Am I supposed to use this 32Bit Oracle Application Server 10g Release 2 (10.1.2.0.2)?
    Also, can you please let me know if my understanding from this whole thing is correct:
    If I wanted to install 10g version of Portal, Discoverer, and OID, and SSO, all I needed was Oracle Application Server 10g and Oracle Developer 10g
    If I want to install 11g version of Portal, Discoverer, and OID, and SSO, I need Oracle Application Server 10g, WebLogic Server and Oracle Fusion Middleware (which includes Discoverer)I am trying to install as little as possible just to configure the latest version of Portal and Discoverer with Single Sign-On on an existing 12.1.1 release running on 11g R2 database.
    The reason for my confusion is that the AS download on below link already includes the following, so why do I need Fusion Middleware at all?
    http://www.oracle.com/technetwork/middleware/ias/downloads/101202-095224.html
    Included: Oracle HTTP Server
    Oracle Application Server Containers for J2EE (OC4J)
    Oracle Application Server Web Cache
    Oracle Application Server Portal
    Oracle Application Server Wireless
    Oracle Sensor Edge Server
    Oracle Enterprise Manager 10g Application Server Control
    Oracle Database Server 10g (10.1.0.4.2)
    Oracle Internet Directory
    Oracle Application Server Single Sign-On
    Oracle Application Server Directory Integration Provisioning
    Oracle Application Server Delegated Administration Services
    Oracle Application Server Certificate Authority
    Oracle Application Server Forms Services
    Oracle Application Server Reports Services
    Oracle Application Server Personalization
    Oracle Business Intelligence Discoverer
    Oracle Security Developer Tools
    Oracle Application Server Guard
    OracleAS Backup and Recovery Tool
    Thanks,
    Sinan

  • What is JSF version of Oracle ADF that come with Jdev 10.1.3.1.0

    HI
    tahank you for reading my post
    which version of JSF used in oracle ADF that comes with jdev 10.1.3.1 ?
    thanks

    JDeveloper ships with JavaServer Faces (JSF) Reference Implementation 1.1_01
    Hope this helps
    Regards
    Grant Ronald
    oracle Product management

  • Oracle Unbreakable Enterprise Linux come with an ndiswrapper kernel module?

    Hello
    Does Oracle Unbreakable Enterprise Linux come with an ndiswrapper kernel module?
    Does Oracle Unbreakable Enterprise Linux come with a package for the ndiswrapper kernel module that matches the kernel version?
    What wireless driver is compatible with Oracle Unbreakable Enterprise Linux?

    Hi,
    Oracle Unbreakable Linux does not come with any ndiswrapper kernel module and any package for ndiswrapper module. But it includes many wireless network drivers. You can look at them from kernel package. For example
    rpm -qlp kernel-2.6.18-8.el5.i686.rpm |grep wireless
    From the output, you can find which wireless drivers are coming with Oracle Unbreakable Linux kernel.

  • Does Oracle Portal come with preceeded OC4J (with PDK)

    Hi,
    I had installed the preceeded OC4J extension (with PDK in it) from http://download.oracle.com/otndocs/tech/ias/portal/files/pdk101202_oc4j_extended.zip.
    What I dont understand are the following:
    1) Does Oracle Portal come with this download?
    2) If so how do I verify whether it is installed or not... I tried accessing http://localhost:7778/pls/portal and http://localhost:8888/pls/portal but in vain, am I missing some configurations?
    3) How do I view the Oracle Portal if it has been installed?
    Regards,
    Nithya

    "Download the pre-seeded OC4J. This download contains the portlet standards, JPDK, OmniPortlet, and Web Clipping already deployed and ready to use within OC4J 10.1.2.0.2. Simply download, extract, and start OC4J."
    You only downloaded the deployed portlets.
    If you want Portal up and running, you still need the have some midtier installed

  • Is MS Word really the best Oracle can come with for designing layouts?

    Hi all,
    I am returning to XMLP development after first looking at it two years ago. Back then I advised our company not to use it for all report development as MS Word didn't seem robust or flexible enough to generate report layouts.
    Now I am working for a client that wants to use XMLP and am trying to develop a fairly simple tabular report but with about 5 levels of grouping. The resulting RTF template therefore has 5 levels of nested tables. Whilst all the data is coming out fine, I am finding it very hard to make the layout look anything like as within Word it is hard to select table cells, visually establish the heirachy of the tables, etc. A simple task like putting the correct borders around cells so they render correctly is very hard to get right. In addition to this I have a number of areas where erroneous white space is being displayed.
    Is Oracle seriously going to continue to expect developers to use MS Word as a layout designer or are they going to develop a decent product fit for the task? I am tired of hearing from sales guys, functional consultants and Oracle blurb how easy XMLP is to develop reports in. Yes, it is if the report is simple, but try and develop a more complex layout and it is anything but simple.
    Anyone got any advice or experience they can share? Are there any alternative tools on the market? A response from Oracle wouldn't go a miss to help stem my disappointment with both product and company!
    Cheers,
    Jon.

    Hi Guys,
    forgive me, that I am biased - I am responsible for the BI Publisher tool development.
    First one comment regarding the nested table - The code we generate for that is the worst part of the template builder. We already have implemented a new version, which is much better - to be released after 10.1.3.4. I apologize for us not fixing that issue earlier.
    Yes, the BI Publisher template builder for Word is different. Naturally it is better for some tasks and maybe weaker for some other ones. Nobody forced the E-Business Suite teams to take up BI/XML Publisher - I was PM in one of the teams so I know for sure - we all decided that we rather use BI Publisher. In our eyes it is a step forward and not 10 steps back.
    I was product manager for Oracle Contracts. We tried to create a contract layout with Oracle Reports and it was not pretty. Sure If I create just some data reports all the classical reporting tools are fine (Do you really like these other tools???)
    But creating contracts or more business style reports like invoices is MUCH easier with BI Publisher. With the first generation of the tools, it took my 2 hours to convert a customer contract example (in word naturally) into a production ready contract layout. Now, I could probably do it in 15 minutes.
    While PL/SQL has great acceptance in the Oracle Community, it is not everyone's favorite - for example Peoplesoft, JD Edwards or Siebel developers can not use PL/SQL.
    XSL has its quicks and wish it was a better language, but it is an OPEN standard.
    We have migrated about 3000 Oracle reports, and all of the Peoplesoft and JD Edwards reports... I don't think it is a toy. It has the same concept as Java Server Pages and it uses Word for formatting instead of HTML.
    True, knowing SQL does not help with BI Publisher reports, but user with a little SQL knowledge can do havoc to a production system. BI Publisher complete separates the responsibilities. SQL for professionals and Word for formatting. I think there are more people out there that know Word than SQL.
    Embedding the XSL did not turn out all that straight forward. We are also missing one feature in the standalone, that we had in E-Business Suite and that will be included in the 11g release: Subtemplates.
    Subtemplates allow you to write complicated XSL libraries that can be called from within RTF templates. For all of you who need to write complicated logic, it is much better to write the logic into an XSL stylesheet and just call out from within the Word template than coding to complicated logic into the Word document. Again my apologies for us not providing this option earlier.
    People also had to learn java for Oracle applications, when they only needed to know PL/SQL before.
    For all the people who don't like Microsoft Word, we are offering a web based alternative shortly after the 10.1.3.4 release. This tool may be better suited for data style reports - you will be the judge.
    I appreciate your feedback and I open for any suggested improvements.
    Thanks,
    Klaus
    Message was edited by:
    KlausFabian

  • Unable to boot bankapp servers with Oracle 8.1.7 in windows2000

    Hello,I tried to run bankapp examples with oracle 8.1.7 in windows2000. But when
    I booted the servers using tmboot, there are some errors.(1)I used the following
    RM entries:Oracle_XA;xaosw;D:\Oracle\Ora81\precomp\lib\msvc\oraSQL8.lib D:\Oracle\Ora81\precomp\lib\msvc\oraSQX8.lib
    D:\Oracle\Ora81\RDBMS\xa\ORAXA8.lib (2)The OPENINFO string in the ubbshm file
    is:DEFAULT:TMSNAME=TMS_ORA TMSCOUNT=2 LMID=SITE1
    BANKB1     GRPNO=1 OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/tiger+SesTm=100+LogDir=.+MaxCur=5"(3)the
    follow is the error message when I booted the servers:
    .. 174841.GLOBALDB!BALC.852.2572.0: 07-26-2001: Tuxedo Version 8.0 32-bit Windows.
    174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:262: INFO: Standard main starting
    174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:466: ERROR: tpopen TPERMERR xa_open
    returned XAER_RMERR
    174841.GLOBALDB!BALC.852.2572.0: tpsvrinit: failed to open database due to
    174841.GLOBALDB!BALC.852.2572.0: tpopen failed, tperrno: 16
    174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
    174841.GLOBALDB!tmboot.480.548.-2: CMDTUX_CAT:825: ERROR: Process BALC at SITE1
    failed with /T tperrno (TPERMERR - resource manager error) ...
    Can anyone help? Thanks a lot!
    Best Regards
    Lily

    I found the answer myself in an earlier post.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by The Oracle Reports Team:
    Reports 6i will connect to Oracle8i, however you need to connect over Net8 - i.e. on the database side, you need to set up the TNS listener to accept connections, and on the Reports side (which, incidentally, needs to be installed in a separate Oracle_home) you need to configure the tnsnames.ora file to connect to the 'remote' database (since it is in a different oracle_home, to all intents and purposes it may as well be on another machine - it's all considered 'remote').
    Regards
    The Oracle Reports Team http://technet.oracle.com <HR></BLOCKQUOTE>
    null

Maybe you are looking for

  • Why won't my iMac start up after I put my password in. It just stops on the screen with the apple logo

    I turned on my iMac today running Lion and typed in my password and it went to the gray screen with the apple logo and a little wheel spinning below it and won't go any further. Ive tried the Pram reset with cmd alt r p. no help. Ive tried a safe boo

  • Since about two weeks the right click doesn't work in firefox, how do i resolve this?

    I always used the Nightly version of Firefox, so I figured it was a bug in the new update. But by now I completely removed Nightly, and installed the normal Firefox, but still nothing happens after rightclicking in the screen > in, e.g. the bookmark

  • How to modify file name with the press of a radio button

    Hello, I have a simple task that I am having some trouble completing. This is what my program is doing: My VI takes 3 angles between -180 and 180 and computes the XYZ coordinate using a mathscript node. Then every time I press Trigger, the current 3

  • Fatal (??) crash out of nowhere

    Hello There! Recently I bought a MSI K8T Neo FISR2 board with a A64-3200+ CPU. Still need to buy some other parts, but I couldn't wait. So I installed everything, and it worked perfect. Specs: 300WATT PSU (Cheap-ASS ) MSI K8T Neo FISR2 (bios default,

  • Hyper-V 2012 R2 Cluster Creation Fails

    I am trying to create a 2 Node Hyper-v 2012 R2 Cluster.  The Cluster Validation passes with no errors or warnings but the the cluster creation fails.  The error is similar to here .  In this case he solved it by joining the Nodes to a Windows 2012 Do