Comcast Cable Internet not working with router (WRT54G), but network is fine?

My Comcast Cable Internet is not working with my router (WRT54G), but my home network is fine. The internet works without router.
I have a WRT54G Wireless-G Broadband Router from Linksys.
I was using Bellsouth DSL Internet up until two weeks ago.
I had my DSL modem connected to my router, and the router let me use the internet and share some files and printers with my laptop upstairs.
A few weeks ago we changed to Comcast cable. The technician came in and connected it himself, but only for the desktop. The internet worked perfectly, and still works perfectly on my desktop (the one downstairs). He didn't really give me any instruction or CD-roms for it.
When I tried connecting my router, the internet stopped working. It was weird because the router worked for the file sharing and printer sharing between both my computers, but the internet didn't work. Although, the light for the internet is lit on the router itself.
I even have this program called "AOL Network Magic" which shows a map of what is connected to the router, and it shows that the router and my laptop and desktop are connected, but then it has an "X" for the internet connection.
I have tried everything. I lost all of my CDs and things that came with Linksys, but I downloaded some guides from the Linksys website and it doesn't really help. I tried something called "NetSet", but after I set everything up it says my router is not compatible or something with NetSet. I read a bunch of FAQs, I tried going to comcast and seeing if they had any FAQS about it, but I can't find anything.
Maybe one of you can help me?
Also, I don't know my modem's IP address. I had it for Bellsouth, and sometimes when I would lose my connection I would go there and click on "reconnect" or something like that.
So the only way I can use the internet is to disconnect everything from my router and connect the ethernet cable directly to the modem.

You may open the web setup utility page of the router by typing its IP address on your browser's address bar. By default, it is 192.168.1.1. When you're asked for username, you may leave it blank. For password, its "admin". If in case that does not work, reset your router at the back for 30 secs and do a power cycle again, see if it becomes accessible after that...
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

Similar Messages

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

Hi,
Any one have this issue?
HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
This issue was found in my replacement motherboard. the original mother do not have this issue.
The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
Appreciate any one can provide clue for resolving the problem.
I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50)

@wheng
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

INTERNET NOT WORKING WITH PRINTER HP OFFICEJET PRO 8600

Hi,i have new printer HP OFFICEJET PRO 8600.if i connect printer to PC internet stops to work.I have mobilstick internet.Its working without printer.IF the printer is connected and i put mobilstick to PC its writeing the device cannot be recognized.The internet is working with old printer.
I have windows XP.thank you

It does sound like there is a compatibility problem. You might try posting on one of the computer boards to see if anyone has advice on a computer setting that might help solve the compatibility problem. Click Here
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Arris Cable Modem not working with WRT54G Router

I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them. Any help GREATLY appreciated!
Thanx!

ok man, good new and bad news. Good news, i know what ur goin through cause i have the exact same problem. Tried a new router too (wrt54g to no avail). Bad news i have no idea how to fix it. I've tried everything. Linksys tech support hasn't emailed back after their originaly fix which did nothing. Please PM me if you get any ideas. Ps Have you noticed that when the setup page times out you can't get an ip wirelessly. Also, my temporary fix is power cycling. Somtimes it works for a few days, or sometimes a few hours.
[Mod Note: Email address removed. Get in touch through PM for details.]
Message Edited by OnnagokorO on 09-25-2007 08:45 PM

Internet not working with Time Machine after power outage... but works when

My power went out and now the internet will not connect with the Time Machine. If I plug it directly into my mac book it works. Sometimes it takes a little bit to work when plugged straight in, but I can get it to work. However, when using the Time Machine, I can't get on at all.
I tried using the Airport Utility Set up and nothing worked -- and now it won't even recognize the time machine at all!
Any suggestions of what to do? All of my work is on the internet. I had no issues before the power went out.
Thanks!!

Hello,
Yes, I mean Time Capsule. I tried unplugging and plugging in several times. Nothing is working. Somehow I cannot even see the Time Capsule network as being there at all.
I've had the cable company come replace the cable modem, but the guy didn't really know anything beyond that. So I have a new modem that can work when the cable is plugged directly into my laptop but the whole functionality of the Time Capsule is down.
Please help! I need internet this fixed by tomorrow morning if possible.
Greatly appreciate the help! Thanks!!!
Danielle Marie Crume
http://youknowitbyheart.com
http://www.twitter.com/sumsette
"We are continually faced with a series of great opportunities brilliantly disguised as insoluble problems." ~John W. Gardner

PC Internet Not Working with Airport Extreme

Hey guys, just got a new Airport Extreme to replace my old one. Me and my brother's MacBook's both work in terms of the internet, but my dad's PC's internet will not work. It is connected to the Airport, but has no internet access. Any ideas? Thanks.

Apple's support section (http://docs.info.apple.com/article.html?artnum=306256) says "How to enable Cisco VPN connections
You should use Cisco's VPN client software to establish a Cisco VPN connection via an AirPort Extreme base station. Note: In the Cisco VPN client preferences, make sure the "NAT-T" option is enabled.
Note: Some corporate firewall configurations may cause issues with the Cisco VPN software.
Please contact AppleCare support if you are unable to contact a Cisco VPN server via Cisco VPN client software and an AirPort Extreme base station.
I'm experiencing the same thing. DellLatitude D610. Netgear rangemax wireless PC card (WPN511). I can connect to the internet but I try to vpn into work I get half way through the connection process and get an error which states" Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I've spent 2 hours trying different settings. I really want to stick w/the apple product but will have to return it if I can't get it to work. I need cisco vpn via wintel for work.

My auxiliary cable will not work with my ipod touch

Will someone please help? My auxiliary cable will not fit my ipod touch. I am trying to hook it up to my stereo. My ipod 4th generation fit just right.

See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Wireless-Card doesn't not work with WPA/WPA2 but with WEP [Solved]

Hello I have a MacBook (late 2007) with a wireless-card from Broadcam, the card works with WEP and the classic configuration over rc.conf very well. But I can't get the card running with WPA and the net network-profiles.
Here is the link to the driver - http://www.broadcom.com/support/802.11/linux_sta.php
eth2 = wireless-card
eth1 = firewireanything
eth0 = wired-card
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="macbook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(!eth0 !eth1 eth2)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(wireless)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
/etc/network.d/wireless
CONNECTION="wireless"
INTERFACE=eth2
HOSTNAME=macbook
IP="static"
IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
DNS1=192.168.1.1
# Wireless Settings (optional)
ESSID=3Com
#KEY=
IWOPTS="mode managed essid $ESSID channel 11"
#WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
# that is linked to the real $INTERFACE
#WIFI_WAIT=5 # seconds to wait for the wireless card to
# associate before bringing the interface up
USEWPA="yes" # start wpa_supplicant with the profile
WPAOPTS="" # use "" for normal operation or specify additional
# options (eg, "-D ipw")
# see /etc/wpa_supplicant.conf for configuration
Can I set here the WPA/WPA2-Key also? Why here ESSID? Do I need still a configuration in wpa_supplicant.conf?
Thats very confusing and not explained.
WPAOPTS? Do I need to add something like "-D wext"?
/etc/wpa_supplicant.conf
# This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
key_mgmt=NONE
priority=-9999999
network={
ssid="3Com"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="topsecret"
priority=5
# WPA2
# proto=WPA RSN
I need help. Please
Last edited by hoschi (2009-01-04 20:21:58)

fwojciec wrote:If this info is not in the wiki it might be worth it to add it -- it's all detailed in /etc/network.d/examples/complete.example though.
Thats the reason why I was so confused.
My new and well working configuration:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="macbook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(!eth0 !eth1 !eth2)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(3com)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
CONNECTION="wireless"
DESCRIPTION="Very verbose complete wireless example"
INTERFACE=eth2
HOSTNAME=macbook
# Interface Settings (use IP="dhcp" for DHCP)
IP="static"
IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
# DNS Settings (optional)
DOMAIN=localdomain
DNS1=192.168.1.1
DNS2=
SEARCH=
# Standard Wireless Settings
ESSID=3Com
SECURITY=wpa-config # One of wep, wpa, wpa-config, none
KEY=""
# Scans to see if network is available before connecting (reccomended)
SCAN="YES"
# Time to wait to connect to a network. Default 15.
TIMEOUT=10
# Pass *custom* options to iwconfig. Usually not needed (optional)
IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
# Any extra arguments for wpa_supplicant
WPA_OPTS=
# For SECURITY='wpa-config' only - filename of a wpa-supplicant config
WPA_CONF=/etc/wpa_supplicant.conf
# This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
key_mgmt=NONE
priority=-9999999
network={
ssid="Linksys"
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="areulookingatmybreasts"
priority=5
network={
ssid="3Com"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="nomam"
priority=5
# WPA2
# proto=WPA RSN
There are also profiles for the Linksys-Router and for wired cable.
Thanks for the help!
Last edited by hoschi (2009-01-04 20:21:23)

OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it...
Modular Design
Large legal sized Scanner
Standard/Legal Paper Printer
Copy
E Print Capability
High Yield / Affordable Toner Replacements
Unfortunately, I discovered the Wireless network capability is less than desirable. After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work. If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
HOWEVER, I did discover this solution. If the unit is near your base computer, install it to your computer with a usb connection. That allows you to have scanning and printing from that unit. Then you can connect the unit through its ethernet connection to your router. From there all computers can print within your network. It's not the best way to connect a WIRELESS printer, but at least it works.
I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked. The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure. I wasted an entire day of productivity attempting to make it work. I'm posting this so you don't make the same mistake. If you happen to know a verified solution, then I would welcome the information. Best of luck!!!

It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
http://www.apple.com/support/bootcamp/
I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

Internet not working through Apple applications, but ok in firefox?

I'm having trouble with my internet connection through Apple software on my computer. It started a few days ago, I don't think any changes have been made to my network.
Basically if I try to connect to the internet in Safari, Mail, iTunes, Dashboard or anything else that's an Apple program, it doesn't work at all. It spends a huge amount of time "Loading..." and sometimes will eventually come up with the information but usually times out.
However, if I use Firefox - which I had luckily installed on my computer - all pages and everything load instantly.
I connect to the internet through an Airport which we bought three months ago. The Airport connects to a modem which connects to the line.
What is wrong and how do I fix it?? I much prefer using Safari and I'm dying because I can't get into the iTunes store!!

Hi and welcome to Discussions,
Firefox is one of the few applications that maintain their own 'Proxy'-settings and do not use the general 'Proxy'-settings of OSX like all the other apps you mentioned to not work.
Check the Proxy-settings of Firefox against the general OSX ones.
Hope it helps
Stefan

Lightning cable won't work with any computers, but will work with wall chargers

My iPod Touch (5th Gen)'s cable is having some issues. I can not connect to any computers with it (I've tried two different iMacs, my Macbook Pro, and a car USB port that is used to play music through the car speakers). It used to work intermittently for a while, but now it doesn't work in any situation with computers. However, it will work with various power sources that have a USB port on them, but don't transfer data (A USB battery and a wall adaptor). This is using the AmazonBasics Apple Certified Lightning to USB Cable. (http://www.amazon.com/gp/product/B00FA4Y66U/) I've had this issue with both iOS 8 and iOS 7, even after completely wiping the iPod.

Try a genuine Apple cable
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

ISight not working with Apple apps but only with Skype and flash....

Hi guys, don't know why but suddenly my isight stopped working with every apple application, like ichat, imovie and photoboot, but it still works with skype and safari (flash).
The camera simply doesn't work, the green led stays off.... I tried resetting PRAM, SMC, deleted .plist files, tried new account and everything...
Maybe the problem is facetime, I uninstalled it by simply dragging it to the trashcan, so I followed a thread here and manually deleted its last files but no luck....
Please guys help me, I really hope I don't have to FORMAT my mac... sounds so windows to me XD...

V4N0 wrote:
...Well the camera is seen in system profiler and it works perfectly with skype, I'll try a couple of things then... well reset is inevitable....
Thanks for the "helpful" star, V4N0!
(1) Your initial post shows you using Mac OS X (10.6.6),
but your latest post shows Mac OS X (10.6.5).
Have you "downdated" to 10.6.5?
(2) iSight works with iMovie, Photo Booth, QuickTime, and other apps like Address Book,
etc. You need not try every possible app, but please tell us which you have tested,
and which, if any, work with your iSight.
(3) Have you tested iSight operation in more than one user account?
Are the symptoms EXACTLY the same in any user account you test?
(4) If your only problem is with ALL apps in ALL user accounts, try applying the
Combo Update using the method suggested in this recent post:
http://discussions.apple.com/thread.jspa?messageID=12859723&#12859723
If you want the latest Mac OS instead of 10.6.5, download the 10.6.6 Combo Update:
http://support.apple.com/kb/DL1349
instead of the 10.6.5 Combo (http://support.apple.com/kb/DL1324) link in the post.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6)
MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11)
iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Internet not working properly in osx but fine in xp

I'm running OS X 10.5.6 and found that lots of websites just aren't loading up. For example I have to post this in xp as this part of the apple website just hangs.
Webmail also doesn't work, can't log onto hotmail, I can log onto yahoo but cant read messages or send mail via webmail. If I use the 'mail' program in OS X I can download all the mails and send very small mails of up to about 10 lines, any more than that and they just get stuck. I have tried Safari, Firefox and Seamonkey, also the Seamonkey mail client and all suffer the same problems.
The websites will just sit there loading and eventually time out.
I have XP home edition on bootcamp, if I reboot into that it's fine and I can access everything normally using both IE7 and firefox.
If I run the same xp partition using VMware fusion though I have the same problems as in OS X.
This problem was present in 10.5.5 and I was hoping it would be cured in 10.5.6... I guess not.
I read a lot of talk about dns problems so I manually added various dns servers but to no avail. The network settings are the same in xp as in os x (except for the dns servers I added).
Has anyone got any suggestions on this? I got a mac to escape windows, now its forcing me to use it >.<

I'm also having extreme problems with Flash. I did the
uninstaller thing too, I re-booted over & over again & it's
still not working. I can't view anything that uses Flash!!! It
shows up as being installed on my computer, but all the websites I
go to say "you don't have the new version installed-install now."
There's a link to install, I get the pop up on my toolbar to
install Active-X, but nothing happens.
If anyone has new info...please help

Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"

I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player, and it still wouldn't work.
The user is on Windows 7, 64-bit. Using IE 10.
Flash not working for Standard User - YouTube

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Comcast Cable Internet not working with router (WRT54G), but network is fine?

Similar Messages

Maybe you are looking for