Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

Similar Messages

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

I use Citrix Receiver to connect to my office systems when I work from home. The office systems are Windows 7 based and I work at home on a Imac. Up to yesterday everything worked like a dream. Then I upgraded from OSX 10.9.4 to 10.9.5 and sine then my keyboard has stooped responding when I am connected to my office system. When I close Citrix the keyboard works OK. I tried to connect using a MacBook still on 10.9.4 and there are no problems with the keyboard in Citrix. What do I do to get the keyboard to work under 10.9.5?

Citrix Receiver is upgraded to 11.9.0. http://discussions.citrix.com/topic/356870-receiver-for-mac-119-tech-preview-for -os-x-yosemite/
It works good together with OSX 10.10 Yosemite.
I think they did a great job releasing an update so soon after the release of Yosemite.
I upgraded to Yosemite on a mid 2011 iMac. It all performs better that OSX 10.9.5. No issues so far.

IPhoto no longer works with Nikon 5100 after upgrade to 10.8

IPhoto with newly installed Mountain Lion no longer recognizes a connection to my Nikon 5100. The USB cable is good, as it works with my other Macs -- OSX versions 10.6.8 and 10.7.4, just as it did with my Imac before I upgraded to 10.8. My Preferences are set to recognize any camera. I even upgraded to IPhoto 11 v9.3.2, but no help. Any ideas?

Hi, I have the same problem with my Nikon Coolpix 5000: camera is not recognized at all by Mountain Lion after upgrading: worked just fine with Lion.
Problem: I connect the camera, Mac (MacBook Pro Late 2011) freezes for a while (!!!) then external disk icon does not appear.
Console registers messages like the following:
20/08/12 19:34:24,000 kernel[0]: USBF: 363761.547 AppleUSBEHCI[0xffffff801fcbf000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
Strange thing is, my Coolpix 5000 is a very old camera with only USB 1 support: this problem occurs to me with every USB 1 device connected on Mountain Lion!
Hope they'll fix the problem or just find some workaround...

I have the command, control, and option key symbols that display on my desktop when I tap them on my keyboard. what is this called? and how do you get rid of them from doing this?

Not sure what this is called and I need help to get rid of it.

I already figured it out it was the act that sticky keys was on.

Airplay no longer working with 3rd party after upgrading to Maverick.

I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

I and K keys no longer working on Macbook keyboard

The I and K keys no longer work, it seems. I've restarted, attempted to clean out the keyboard, restarted again, etc. No dice. Sometimes when I push I or K I'll get an odd string of characters--'YIOU' or a bunch of symbols--but mostly I just get no response. I wasn't doing anything unusual when this started and I didn't spill anything on it.

Welcome to Apple Discussions!
I have heard around the message boards about this kind of problem, and no one seems to know what the problem is. Your best bet is to take it into Apple and they can fix it for you. If you are in warranty, they shouldn't charge you, especially since you didn't spill anything into the keyboard (also a common problem). if you are out of warranty, you're looking at around $90 or so (still better than not being able to finish that email or that final report!). i had my keyboard replaced for a different reason, but the receipt said I would have been charged said amount had I not been under warranty.
hope that helps!
-MD55

RETURN/ENTER and SHIFT keys no longer work, and my number keys only work as numbers - no longer do they serve as exclamation points or dollar signs etc.

After downloading OS X Yosemite my RETURN/ENTER and SHIFT keys no longer work, and my number keys only work as numbers - no longer do they serve as exclamation points or dollar signs etc. PLEASE HELP

Does this bad behavior persist when logging in as a different user, e.g., Guest? Does it persist when starting up in Safe Mode?

Function keys no longer working with a new keyboard...

I got a new keyboard and my function keys no longer work with it. I am used to have them used in the standard format, i.e. F10-F12 control the voume, etc. I have the "Use all f1,f2, etc." button clicked. I have also tried restarting my computer. Any thoughts?

Try doing a SMC reset and PRAM reset.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

IHome no longer works with iPhone 4s after iOS 6.1 update.

My iHome no longer works with iPhone 4s after iOS 6.1 update. Prompts message 'This accessory is not supported by iPhone'. Has anyone come accross this and is there a fix?

Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

Option keys no longer working!

Can any experienced user provide a solution for this seemingly simple problem? Since I upgraded to 10.6.8, my keyboard (first slim version, extended) option keys are dead. All other keys seem to be working normally.
Here are just a few problems associated with it:
8 I can no longer make a bullet (option 8) as you see here.
8 I can no longer shut down my computer using command-option-control-eject. It restarts instead now.
8 I can no longer perform various keyboard shortcuts in Adobe CS5 apps that require using the option key.
How do I fix this...anyone?

Thanks for the response. Option modifier key is set to Option.
Thinking back again to when this first occurred, it actually started about a week before updating to 10.6.8. The first time I noticed it was when I upgraded to Adobe CS5 from CS3 and in InDesign was not able to change text leading using the option key. I thought CS5 might have a different keyboard shortcut for that, but no. Still, at that point, I didn't realize it was the option key that wasn't functioning until these other issues occurred. Could CS5 could have caused this? Perhaps I should go to the Adobe forum with this issue.

Volume and Eject Keys No Longer Work After Boot Camp 2.1 Update

Earlier this evening I allowed the Apple Software Update app in Windows to update Boot Camp to version 2.1. I allowed the computer to restart following a successful installation of the update. I've restarted two more times since then. Ever since the update (including before the computer restarted for the first time following the update), the volume and eject keys on my keyboard don't work. I also have an Apple Wireless Keyboard (one of the 2003-2007 era white/clear ones) and it exhibits the same problem. Both keyboards otherwise work fine. The computer also otherwise works fine, and there's no evidence of any driver problems.
Some other potentially relevant information:
1- The Boot Camp icon is no longer present in the Windows System Tray.
2- The Boot Camp Control Panel is still present in the Windows Control Panel and it works fine.
3- All settings in the Boot Camp Control panel are unchanged from their defaults. In particular, I have confirmed that "Use all F1, F2, etc. keys as standard function keys" is still unchecked.
4- The Windows Device Manager properly recognizes both keyboards as Apple Keyboards.
I'm using Windows Vista Ultimate on an early 2008 MacBook; system specs are in my signature. Any ideas?
Thanks for taking the time to read this, and double-thanks if you can respond with any suggestions!

Ah, the joy of working with computers...:( Apparently, from my woes with the same problem, the Apple Keyboard Manager is rightfully entered into the Run directory in the Windows registry at HKLM/Microsoft/Windows/Current Version/Run.
Why it doesn't start I still have to find out, but this may be because I have Parallels Workstatio installed as well and switch back between a virtualized Windows and a Bootcamp Windows. However, after installing Bootcamp 2.1 first and then SP3 IN THE BOOTCAMP ENVIRONMENT everything seems to work, except the Energy Options taskbar icon and Apple Keyboard Manager.
Will keep you posted on any progress I make.
Apple Support, BTW, was absolutely abysmal, with them even refusing to accept the ticket at all, on the grounds that they have no knowledge about Windows. Apple, get your support fixed!

Enter and tab keys no longer work

Good morning.
My enter and tab keys are no longer working within a text box. Could it be the result of installing "Deke Shortcuts" on my system? I never had a problem before the installation....
Any suggestions would be welcome.
Thank you.

Did you try removing the shortcuts?
I'd suggest resetting your prefes: Adobe InDesign CS4 * Setting preferences

Progams that work with Alltel and Suddenlink are no longer working with VERIZON (IRC)

I have worked this issue TO DEATH already and am getting FED UP!
I have been polite and nice and called customer support to get very short and not very explicit answers to this issue.
Complaint #1: When I call technical support and ask questions more complicated than " How do I plug in my computer?" they inform they are transferring me to TECHNICAL support. Okay so who did I call in the first place if not tech support.
Problem: IRC ( Internet Relay Chat) Is one of the main things that I enjoy doing online. Some do games, some do work. I do it all through my little IRC program. When I was with Alltel and had my little blackberry pearl. I could even get onto irc just fine that way. Getting on via a cell phone is kind of a pain. Small keyboard and lots of typing isn't my idea of that relaxing but.. okay whatever at least I could get on. Since Alltel became Verizon I was told to upgrade my phone to the brand new Blackberry Curve. Well now IRC didn't work. I upgraded to the LG Vortex. Now it works on my phone. So I upgraded my wireless card too and IRC worked just fine for a long time. NOW we are back to the same old same old.
For those of you not familiar with the program just wiki it. I have been told by NUMEROUS customer support reps that this program is not being blocked so this is the list of things I went through to make sure it was indeed NOT me or my computer.
Step 1: System restored before most recent updates to the last date that it was working.
NO GO
Step 2: Disabled firewall and virus software temporarily and even turned down my security on my browser
NO GO
Step 3: Re updated my computer and updated my firmware on my MIFI2200 card.
No go
Step 4-7 Called customer Support
NOPE.
Still waiting. I am paying for a service that is not providing. My entire family was with Alltel and is now with Sprint. I just keep asking myself why am I still with Verizon when all we ever do is fight. I hate to admit it to the kids but I think it's time for a divorce from you if we can't get this issue resolved. Before upgrading to these devices I even asked store reps if irc programs would work and they assured me " OH YES! With these new upgrades things will be better than ever!"
I realize to some this seems like not a very big deal, but when I am paying for a service so that I can come home relax, maybe take a few art commisions while chatting on irc and all the sudden I either can't use it or can use it when I couldn't before it's amazingly frustrating. I have taken my computer over to other people's houses to see if turning my security all the way back up as well as my firewall made a difference, but on any provider OTHER than verizon I can connect just fine.
Tell me WHY Verizon. Tell me why you either can't fix this.. or won't fix this.
Security issues? That's my problem. If I want to connect to a DNS server based program that connects via different ports.. that should be MY decision. You should NOT get to make that choice for me.
It's amazing I went to the customer support for IRC and they told me that Verizon doesn't allow you to use IRC. I have checked NUMEROUS boards and discussion forums only to have them tell me that VERIZON does NOT allow you to use IRC. However when I talk to Verizon they say " No it must be you.. " Well I am not taking that excuse anymore. I've done my share of work on this problem. Now it's your turn. Sorry to be rude.. but I paid for the mIRC program, and take artwork commisions over it as well. I probably pay more for verizon's service than I would with sprint (so says the rest of the family).
Please give me some real answers and real tech support.
Thanks for any help.

I choose option 3. The moment I talk to them about anything more complicated than the bare basics of getting connected they tell me they will transfer me to " tech support." Very frustrating lol. I always wonder who I was on the phone with prior to that because it says Tech support but clearly there must be different levels of their support lines. Sometimes I get someone who will talk and work with me, but generally I get someone who says " Okay I have down your issue and I'll pass it along.." then they hang up. However I have been transferred twice in one sitting from "tech support" to Tech support. So I dunno. I think they don't have an answer and so they run me in circles.

Aperture and DVD Player no longer work with NVIDIA 330M, help!

I recently got my computer back from the Apple Store, had the display switched because the glass kept falling off.
Anyways, since getting it back, I noticed DVD Player doesn't work anymore, it gives me:
There was an initialization error
A valid video device could not be found for playback. [-70017]
And when I try to start Aperture 3.3:
Error
The installed graphics card does not meet the minimum requirements for Aperture.
I have a mid-2010 MBP i5 2.4Ghz with 8GB memory, running OSX 10.7.4.
Things i have tried:
Reset PRAM
Reset SMC
Boot into recovery mode and fix permissions
Boot into 32 bit kernel
force fsck
Create new user and try from that account
Also my video conference software, Jabber gives an error and quits too. Its something with the video.
Switching to Intel HD video, everything works fine. Only with the NVIDIA 330M do I get this error.
Does anyone have any idea what this may be or what I could try?

I'm having exactly the same problem. Additionally, the DVDs I make aren't recognized by other Macs I've tried. All the Preferences are set correctly.
My dvd player no longer reads commercial movies or a
dvd project I just burned with it. Disks no longer
show on my desktop when they are inserted. When I
got to dvd player and manually press play it reads
"not Permitted" for both.
The burner does work in as I played the dvd in my
home dvd player.
PowerBook G4 Mac OS X (10.4.6)

NB305 - FN key no longer working with Flash Cards

I acquired my NB305 last week, and the FN key was working such that when you held it down the Flash Card appeared at the top of my screen. However, that association has since ceased. The FN does work for other purposes, and I turned on the feature with the Flash Cards to allow the mouse cursor to activate them. so both the key itself and the Flash Cards are working, but not together.
I have searched high and low and I can find no way to reassociate the key and the Flash Cards. This forum is my last hope for solving this riddle. I did search the board, but I could find no reference to this problem.
Any assistance you may be able to provide is very much appreciated,
-Neil

start menu> all programs> toshiba> utitilies>settings for flash cards. when the window comes up check the box for allow the mouse to bring up the cards. also make sure the box next to keep the cards on top of other windows so they alway show up where you can see them if you have other programs open. when you have problems bringing them up with the FN key try the same thing as before but instead of settings for flash cards select reset flash cards
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

Similar Messages

Maybe you are looking for