Command to start the SAP Server in AIX Machine

What is the command to start the SAP Server in Unix Environment

Hi Balaji,
To start sap you just type startsap on the command prompt... are you getting any specific errors?
Also read,
http://help.sap.com/saphelp_nw04s/helpdata/en/70/b38937809c8f71e10000009b38f842/frameset.htm
Regards
Juan

Similar Messages

  • Starting the sap server using startsap program .

    Hi ,
    platform AS400 R3/DB2
    For manually starting the sap server using startsap program .
    startsap sid(c44) instance(44) profile('/usr/sap/c44/sys/profile/what profile?)
    I want to clear my doubt in  the above command, which profile can be given for the above startsap command?
    please help.
    Regards
    Hany.

    Hany,
    Is there more than one instance of SAP running on this server? Usually a 'startsap' or "startsap R3" - if the db is started already - will work.
    Otherwise, you'll want to use the instance profile of what your attempting to start. Remember there are 3 profiles in the folder - Default, start, and instance.
    Try to start with the instance profile.
    -Tim

  • I fail to start the sap server with error:Operating system call recv failed

    I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
    R/3 Basis System: Operating system call           recv failed (error no. 10053)
    Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

    trc file: "dev_disp", trc level: 1, release: "620"
    Sun May 07 13:14:30 2000
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        3628
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    Sun May 07 13:14:32 2000
    WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
    Sun May 07 13:14:37 2000
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          12784     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
    DpShMCreate: allocated sys_adm at 001E0040
    DpShMCreate: allocated wp_adm at 001E0560
    DpShMCreate: allocated tm_adm_list at 001E3750
    DpShMCreate: allocated tm_adm at 001E3778
    DpShMCreate: allocated wp_ca_adm at 00380438
    DpShMCreate: allocated appc_ca_adm at 00384A88
    DpShMCreate: allocated comm_adm_list at 003861F8
    DpShMCreate: allocated comm_adm at 00386210
    DpShMCreate: allocated ca_info at 003B5010
    DpShMCreate: allocated wall_adm at 003B5018
    MBUF state OFF
    Sun May 07 13:14:38 2000
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
    <ES> 2457 blocks reserved for free list.
    ES initialized.
    ***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6200, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
    DpMsgAdmin: Set patchno for this platform to 674
    Release check o.K.
    Sun May 07 13:15:18 2000
    ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    Sun May 07 13:15:38 2000
    ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W13
    my types changed after wp death/restart 0xbf --> 0xb7
    Sun May 07 13:15:58 2000
    ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W15
    Sun May 07 13:16:18 2000
    ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    my types changed after wp death/restart 0xb7 --> 0xb5
    Sun May 07 13:16:38 2000
    ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W14
    ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W16
    my types changed after wp death/restart 0xb5 --> 0x80
    DP_FATAL_ERROR => DpEnvCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    DpModState: change server state from STARTING to SHUTDOWN
    Sun May 07 13:16:42 2000
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
    MBUF state OFF
    MBUF component DOWN
    ***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

  • Error while starting the weblogic server

    hi all
    i got the below error while trying to start the weblogic server on windows machine (win2k3-sp1). please suggest me the best way to overcome from this problem.
    thanks in anticipation.
    "FATAL ERROR: Exception from System.loadLibrary(smjavaagentapi) java.lang.Unsatis
    fiedLinkError: no smjavaagentapi in java.library.path
    FATAL ERROR: Exception from AgentAPI.initialize() java.lang.UnsatisfiedLinkError
    : initialize
    <Aug 22, 2006 6:23:51 PM GMT+05:30> <Critical> <WebLogicServer> <BEA-000386> <Se
    rver subsystem failed. Reason: java.lang.UnsatisfiedLinkError: javaagent_api_get
    Config"

    Copy http_client.jar file from $ORACLE_HOME/oui/jlib to $DOMAIN_HOME/lib. Also check whether the classpath has been set for this jar file under $DOMAIN_HOME/bin/setDomainEnv.sh
    https://forums.oracle.com/forums/thread.jspa?messageID=10200685

  • Problem in starting the web-server after configuring .so on AIX

    I am trying to configure a .so file in iplanet fasttrack web server 4.1 on AIX 4.3. I have build the .so file on IBM AIX 4.3. But while starting the web-server it failed to start.It fails when I include the following in obj.conf "Init fn="test-init" config="ConfigFile". While starting web-server I got the following :
    server terminated (signal 11): watchdog is restarting it
    failure: server initialization failed
    Any pointers on this would be helpful.

    I got similar errors in the past when the web server process was running in the background. Sometimes shutting down WAS does not work.
    Before you start WAS ensure that no java process is running or better try rebooting.

  • Why it take so long to start the SAP Web Application Server?

    As I read from the doc that starting the SAP Web Application Server will take from 25 to 40 minutes, I don't believe. But as I try it on my machine, it does take really so long. Isn't it a wonder?
    I am used to work with Tomcat, JBoss, BEA etc. None of them will take so long.

    Hi Chen,
    In a WAS I assume that it has dual stack (ABAP + JAVA)
    For the startup of a ABAP Stack it generally takes about 2 minutes or so.
    And for the WAS JAVA STACK should take around 8 to 15 minutes depending on the application, services and hardware sizing.
    The reason for the long time required for a WAS Java Stackis:
    JAVA Stack depends on three diffrent components: a) dispatcher(java) b)SDM c) Server0 process.
    Now before the execution of all these the first thing what happens is the initializastion of jcontrol which inturn initiates the java bootstrap process.
    At this moment of time the JVM environment takes some time for the loading and memory management. Once the JVM is loaded successfully then only the three compnents (SDM, dispatcher and server0) are initiated to run.
    The SDM and dispatcher do started up with a couple of services and hence require not toomuch of time.
    But the main component i.e Server0 process consumes a lot of time to startup at it requires many of the Java stack services to start before it reaches running state.
    Again the port configuration for HTTP for SDM , dispatcher , server0 and java process also takes place.
    So this was an overview for the Time required for a WAS Stack to come up in operational condition.
    Apart from this , seeing specifically to your scenario, wherein it takes 25 - 40 minutes could be an issue with the Hardaware sizing of the Server and the Sofware compnents / tools loaded. We might need to analyze it in more detail to get a clear picture.
    I hope this helps you!
    Regards,
    Prem

  • Unable to start the managed server on OBIEE11.1.1.6.0, Oracle RTD exception

    Hi
    I am unable to start the Managed server on OBIEE 11.1.1.6.0 , as it is giving the following exception
    "[bi_server1] [NOTIFICATION] [] [oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor] [tid: RTD_Worker_9] [userId: <anonymous>] [ecid: 0000JxpZwaCDkZ__xPWByW1Hm1HW000001,1:23440] [APP: OracleRTD#11.1.1] [WSM_POLICY_NAME: oracle/wss_username_token_client_policy] Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
    Here I am providing the bi_server1.log, bi_server1.out log,bi_server1-diagnostic.log
    Please suggest me workaround to resolve this issue,
    thanks in advance
    Pavan
    bi_server1.log
    ==========
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <WebLogicServer> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900822> <BEA-000000> <WebLogic Server "bi_server1" version:
    WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638  Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Notice> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900902> <BEA-170019> <The server log file /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900906> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Jun 24, 2013 12:41:40 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066900981> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "http" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "https" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901100> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901101> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901106> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901107> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <RJVM> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901133> <BEA-000570> <Network Configuration for Channel "bi_server1"
    Listen Address   :9704
    Public Address   N/A
    Http Enabled   true
    Tunneling Enabled  false
    Outbound Enabled  false
    Admin Traffic Enabled  true>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901212> <BEA-002609> <Channel Service initialized.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901244> <BEA-000406> <PosixSocketMuxer was built on Jan 10 2008 23:07:45>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901301> <BEA-000436> <Allocating 4 reader threads.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901302> <BEA-000446> <Native IO Enabled.>
    ####<Jun 24, 2013 12:41:41 PM AST> <Info> <IIOP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901427> <BEA-002014> <IIOP subsystem enabled.>
    ####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907382> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
    ####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907849> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908041> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_LVk1d2v3EBrlDS/rSIpIRiGgLnM=>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908346> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908755> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909006> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909180> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server bi_server1 for security realm myrealm.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Notice> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909181> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909747> <BEA-002622> <The protocol "[iiop, ldap, http, https, ldaps, cluster-broadcast, admin, iiops, t3s, cluster-broadcast-secure, snmp, t3]" is now configured.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <XML> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909759> <BEA-130036> <Initializing XMLRegistry.>
    ####<Jun 24, 2013 12:41:49 PM AST> <Info> <messaging.interception> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909771> <BEA-400000> <Initializing message interception service>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910180> <BEA-280008> <Opening the persistent file store "_WLS_bi_server1" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/store/default requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910314> <BEA-280009> <The persistent file store "_WLS_bi_server1" (fb352aa7-3e6f-4655-b314-8b2cf7d9caa3) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=109.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910462> <BEA-001135> <Initializing the JDBC service.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910473> <BEA-001137> <Initialization complete.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001138> <Resuming the JDBC service.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001140> <Resume complete.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910507> <BEA-190000> <Initializing J2EE Connector Service......>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910510> <BEA-190001> <J2EE Connector Service initialized successfully>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910593> <BEA-040305> <JMS service is initialized and in standby mode.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910637> <BEA-040090> <Deployed 8 default connection factories.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910641> <BEA-040306> <JMS service is active now.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910680> <BEA-101128> <Initializing HTTP services.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101135> <bi_server1 is the default Web server.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101052> <[HttpServer (defaultWebserver) name: bi_server1] Initialized>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910700> <BEA-101129> <Initializing the Web application container.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910746> <BEA-180046> <INFO: Logging service enabled.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910749> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910750> <BEA-180046> <INFO: TC Task Manager instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910753> <BEA-180046> <INFO: TC security service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910756> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910758> <BEA-180046> <INFO: TC Transaction service instantiated!>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910770> <BEA-220031> <The server does not support reliable SOAP messaging.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910771> <BEA-220027> <Web Service reliable agents are started on the server.>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMX> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910888> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://10.11.34.111:9704/jndi/weblogic.management.mbeanservers.runtime .>
    ####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910904> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
    ####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911658> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
    ####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911696> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912880> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912883> <BEA-000256> <Invoking oracle.as.jmx.framework.wls.spi.StartupListener.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912942> <BEA-000256> <Invoking oracle.j2ee.ws.server.WebServiceServerStartup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912956> <BEA-000256> <Invoking oracle.ias.cache.Startup.main(null)>
    ####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912959> <BEA-000256> <Invoking oracle.dms.wls.DMSStartup.main(null)>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913225> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= null"; Assumed Blocking Config= true; JDK version= 1.6.0; Operating System= AIX.>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913226> <BEA-141279> <Detected BLOCKING java entropy configuration. This is the most secure setting, but may cause performance issues on machines with few sources of entropy.>
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913228> <BEA-141187> <Java system properties are defined as follows:
    EPM_ORACLE_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
    EPM_ORACLE_INSTANCE = novalue
    EPM_REG_PROPERTIES_PATH = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
    HYPERION_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
    XDO_FONT_DIR = /app1/orabi/Oracle/Middleware/Oracle_BI1/common/fonts
    bi.oracle.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
    com.ibm.cpu.endian = big
    com.ibm.oti.configuration = scar
    com.ibm.oti.jcl.build = 20110622_1654
    com.ibm.oti.shared.enabled = false
    com.ibm.oti.vm.bootstrap.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
    com.ibm.oti.vm.library.version = 24
    com.ibm.vm.bitmode = 64
    common.components.home = /app1/orabi/Oracle/Middleware/oracle_common
    domain.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
    em.oracle.home = /app1/orabi/Oracle/Middleware/oracle_common
    epm.useApplicationContextId = false
    file.encoding = utf-8
    file.separator = /
    hyperion.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
    ibm.signalhandling.rs = false
    ibm.signalhandling.sigchain = true
    ibm.signalhandling.sigint = true
    ibm.system.encoding = ISO8859-1
    igf.arisidbeans.carmlloc = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/carml
    igf.arisidstack.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/arisidprovider
    java.assistive = ON
    java.awt.graphicsenv = sun.awt.X11GraphicsEnvironment
    java.awt.headless = true
    java.awt.printerjob = sun.print.PSPrinterJob
    java.class.path = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jdbc/jdk16/bijdbc.jar::/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/app1/orabi/Oracle/Middleware
    java.class.version = 50.0
    java.compiler = j9jit24
    java.endorsed.dirs = /usr/java6_64/jre/lib/endorsed
    java.ext.dirs = /usr/java6_64/jre/lib/ext
    java.fullversion = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
    J9VM - 20110624_085526
    JIT  - r9_20101028_17488ifx17
    GC   - 20101027_AA
    java.home = /usr/java6_64/jre
    java.io.tmpdir = /tmp/
    java.jcl.version = 20110530_01
    java.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/usr/lib
    java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
    java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
    java.protocol.handler.pkgs = oracle.mds.net.protocol|weblogic.net
    java.runtime.name = Java(TM) SE Runtime Environment
    java.runtime.version = pap6460sr9fp2-20110627_03 (SR9 FP2)
    java.security.policy = /app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
    java.specification.name = Java Platform API Specification
    java.specification.vendor = Sun Microsystems Inc.
    java.specification.version = 1.6
    java.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration
    java.util.prefs.PreferencesFactory = java.util.prefs.FileSystemPreferencesFactory
    java.vendor = IBM Corporation
    java.vendor.url = http://www.ibm.com/
    java.version = 1.6.0
    java.vm.info = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
    J9VM - 20110624_085526
    JIT  - r9_20101028_17488ifx17
    GC   - 20101027_AA
    java.vm.name = IBM J9 VM
    java.vm.specification.name = Java Virtual Machine Specification
    java.vm.specification.vendor = Sun Microsystems Inc.
    java.vm.specification.version = 1.0
    java.vm.vendor = IBM Corporation
    java.vm.version = 2.4
    javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
    javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
    javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
    javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
    javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
    jrf.version = 11.1.1
    jrockit.optfile = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt
    jxe.current.romimage.version = 15
    jxe.lowest.romimage.version = 15
    oracle.biee.search.bisearchproperties = /app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jee/BISearchConfig.properties
    oracle.core.ojdl.logging.applicationcontextprovider = oracle.core.ojdl.logging.WlsApplicationContextImpl
    oracle.core.ojdl.logging.componentId = bi_server1
    oracle.core.ojdl.logging.config.file = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ovd_11.1.1/templates/ovd-logging.xml
    oracle.core.ojdl.logging.usercontextprovider = oracle.core.ojdl.logging.WlsUserContextImpl
    oracle.deployed.app.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/tmp/_WL_user
    oracle.deployed.app.ext = /-
    oracle.domain.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
    oracle.ecsf.configuration.class = oracle.biee.search.services.BISearchServiceConfiguration
    oracle.ecsf.security.service = oracle.biee.search.security.BISearchSecurityService
    oracle.notification.filewatching.interval = 2000
    oracle.security.jps.config = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/jps-config.xml
    oracle.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/servers/bi_server1
    org.apache.commons.logging.Log = org.apache.commons.logging.impl.Jdk14Logger
    org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
    org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
    org.xml.sax.driver = weblogic.xml.jaxp.RegistryXMLReader
    org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
    os.arch = ppc64
    os.encoding = ISO8859-1
    os.name = AIX
    os.version = 6.1
    path.separator = :
    platform.home = /app1/orabi/Oracle/Middleware/wlserver_10.3
    rtd.instanceName = RTD_bi_server1
    server.group = obi
    sun.arch.data.model = 64
    sun.boot.class.path = /usr/java6_64/jre/lib/ppc64/default/jclSC160/vm.jar:/usr/java6_64/jre/lib/annotation.jar:/usr/java6_64/jre/lib/beans.jar:/usr/java6_64/jre/lib/java.util.jar:/usr/java6_64/jre/lib/jndi.jar:/usr/java6_64/jre/lib/logging.jar:/usr/java6_64/jre/lib/security.jar:/usr/java6_64/jre/lib/sql.jar:/usr/java6_64/jre/lib/ibmorb.jar:/usr/java6_64/jre/lib/ibmorbapi.jar:/usr/java6_64/jre/lib/ibmcfw.jar:/usr/java6_64/jre/lib/rt.jar:/usr/java6_64/jre/lib/charsets.jar:/usr/java6_64/jre/lib/resources.jar:/usr/java6_64/jre/lib/ibmpkcs.jar:/usr/java6_64/jre/lib/ibmcertpathfw.jar:/usr/java6_64/jre/lib/ibmjgssfw.jar:/usr/java6_64/jre/lib/ibmjssefw.jar:/usr/java6_64/jre/lib/ibmsaslfw.jar:/usr/java6_64/jre/lib/ibmjcefw.jar:/usr/java6_64/jre/lib/ibmjgssprovider.jar:/usr/java6_64/jre/lib/ibmjsseprovider2.jar:/usr/java6_64/jre/lib/ibmcertpathprovider.jar:/usr/java6_64/jre/lib/ibmxmlcrypto.jar:/usr/java6_64/jre/lib/management-agent.jar:/usr/java6_64/jre/lib/xml.jar:/usr/java6_64/jre/lib/jlm.jar:/usr/java6_64/jre/lib/javascript.jar
    sun.boot.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
    sun.io.unicode.encoding = UnicodeBig
    sun.java.command = weblogic.Server
    sun.java.launcher = SUN_STANDARD
    sun.jnu.encoding = ISO8859-1
    user.country = US
    user.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
    user.home = /home/orabi
    user.language = en
    user.name = orabi
    user.timezone = Asia/Riyadh
    vde.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/ldap
    weblogic.MaxMessageSize = 50000000
    weblogic.Name = bi_server1
    weblogic.ProductionModeEnabled = true
    weblogic.ReverseDNSAllowed = false
    weblogic.alternateTypesDirectory = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1
    weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
    weblogic.ext.dirs = /app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
    weblogic.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
    weblogic.jdbc.remoteEnabled = false
    weblogic.management.clearTextCredentialAccessEnabled = ********
    weblogic.management.discover = false
    weblogic.management.server = http://10.11.34.111:7001
    weblogic.nodemanager.ServiceEnabled = true
    weblogic.security.SSL.enableJSSE = true
    weblogic.security.SSL.ignoreHostnameVerification = true
    weblogic.security.TrustKeyStore = DemoTrust
    weblogic.system.BootIdentityFile = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/nodemanager/boot.properties
    wls.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
    wlw.iterativeDev = false
    wlw.logErrorsToConsole = false
    wlw.testConsole = false
    xdo.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/bipublisher
    >
    ####<Jun 24, 2013 12:41:53 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913766> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_internal">
    ####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914573> <BEA-000365> <Server state changed to STANDBY>
    ####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914579> <BEA-000365> <Server state changed to STARTING>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914605> <BEA-281003> <SAF Service has been initialized.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914612> <BEA-281002> <SAF Service has been started.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <WseeCore> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914622> <BEA-220502> <The Wsee Service is starting>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <Deployer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914743> <BEA-149209> <Resuming.>
    ####<Jun 24, 2013 12:41:54 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914823> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls9_async_response">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916264> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_cluster_internal">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916333> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_deployment_internal">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916428> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "EPMSystemRegistry">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916440> <BEA-001177> <Creating Connection Pool named EPMSystemRegistry, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916455> <BEA-000626> <Free resources in pool "EPMSystemRegistry" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916577> <BEA-001124> <Created Connection Pool named EPMSystemRegistry.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916591> <BEA-001174> <Creating Data Source named EPMSystemRegistry, JNDI Name = jdbc/EPMSystemRegistry.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916642> <BEA-001512> <Data Source EPMSystemRegistry has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916644> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bip_datasource">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916652> <BEA-001177> <Creating Connection Pool named bip_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916654> <BEA-000626> <Free resources in pool "bip_datasource" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916655> <BEA-001124> <Created Connection Pool named bip_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916656> <BEA-001174> <Creating Data Source named bip_datasource, JNDI Name = jdbc/bip_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916676> <BEA-001512> <Data Source bip_datasource has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916678> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "mds-owsm">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916687> <BEA-001177> <Creating Connection Pool named mds-owsm, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = SendStreamAsBlob=true;user=DEV_MDS;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916688> <BEA-000626> <Free resources in pool "mds-owsm" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916690> <BEA-001124> <Created Connection Pool named mds-owsm.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916691> <BEA-001174> <Creating Data Source named mds-owsm, JNDI Name = jdbc/mds/owsm.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916726> <BEA-001512> <Data Source mds-owsm has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916728> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "rtd_datasource">
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916735> <BEA-001177> <Creating Connection Pool named rtd_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916736> <BEA-000626> <Free resources in pool "rtd_datasource" will be tested every "300" seconds.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916738> <BEA-001124> <Created Connection Pool named rtd_datasource.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916740> <BEA-001174> <Creating Data Source named rtd_datasource, JNDI Name = SDDS.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916757> <BEA-001512> <Data Source rtd_datasource has been successfully created.>
    ####<Jun 24, 2013 12:41:56 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916922> <BEA-280008> <Opening the persistent file store "BipJmsStore" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/BipJmsStore requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917017> <BEA-280009> <The persistent file store "BipJmsStore" (68f997df-e4a0-4eb1-9497-8d994726f787) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=16.>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917027> <BEA-040321> <JMSServer "BipJmsServer" is resuming.>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917092> <BEA-282003> <The messaging kernel BipJmsServer will use up to 536,870,912 bytes of memory before paging begins>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917115> <BEA-282001> <The messaging kernel BipJmsServer is beginning recovery of its persistent state>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917158> <BEA-282002> <The messaging kernel BipJmsServer has recovered 0 persistent messages>
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917200> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "BipJmsResource">
    ####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917408> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Job.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921006> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Report.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921044> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Email.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921063> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.File.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921078> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.FTP.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921091> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Print.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921107> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.WebDAV.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921125> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Fax.Q" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921143> <BEA-040406> <Distributed destination "BipJmsResource!BIP.System.T" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921170> <BEA-040108> <User connection factory "BipJmsResource!BIP.JMS.CF" is started.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921185> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "Module-FMWDFW">
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921232> <BEA-320114> <Initializing the Diagnostics Harvester.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921241> <BEA-320117> <The Harvester is being disabled because there are no Harvestable types configured specified.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921245> <BEA-320119> <The Harvester is now in a inactive state.>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921715> <BEA-160151> <Registered library Extension-Name: UIX, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (WAR).>
    ####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921841> <BEA-160151> <Registered library Extension-Name: adf.oracle.businesseditor, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922111> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922334> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain.webapp, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922391> <BEA-160151> <Registered library Extension-Name: bithirdparty, Specification-Version: 11.1.1 (JAR).>
    ####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <13

    Hi,
    I tried starting the server from the console as well as from command prompt. Here I am giving the command below.
    nohup ./startManagedWebLogic.sh bi_server1 t3://machineIP:portNo > bis1_startup.log &
    But each time I got the same exception.
    Korandla

  • Batch / script file to start /stop sap server

    Hi,
       I would like to start/stop SAP server using batch file (in windows). I need this, whenever we have to shutdown the server and restart of the server, so that SAP will automatically shutdown and restart using batch files while server restart cases? If anyone knows, please let me know. Thanks,
    Regards,
    Sundar.

    target of the 700 sapstartsrv improvement was to deliver identical functionality on all SAP platforms. As the DCOM programing model is only available on Windows platforms sapstartsrv.exe was enhanced by the WEB-Service interface and is available now on Unix too.
    The DCOM SAPControl interface of sapstartsrv.exe is still existing, but only on Windows. Here you can use VB Script or any other programming language able to handle DCOM objects to write your own programs / scripts to interact with the SAPControl.
    sapcontrol.exe is a command line program available since 700 which enables you control over nearly all functions of the sapstart service.
    Even it has the same name as the DCOM interface it' something completly different.
    regards
      Peter
    PS: sapcontrol syntax
    usage: sapcontrol [
                       -prot GSOAP_HTTP| http using gsoap build in sockets (default)
                             NI_HTTP|    http using SAP NI sockets (prefer Unix domain sockets)
                             NI_HTTPS|   https using SAP NI sockets (prefer Unix domain sockets)
                             WINHTTP|    http using Windows winhttp
                             WINHTTPS|   https using Windows winhttp
                             PIPE        Windows named pipes
                       [-user <user> <password>] OS user and password for Webservice authentication
                       [-repeat <N> <D>]         Repeat Webmethod call <N> times (-1=forever) with <D> sec delay
                        -format list|            List output format (default)
                                script           Script output format
                       [-host <hostname>]        Host to connect to (default: localhost)
                       -nr <instance nr.>        SAP Instance number to connect to
                       -function <Webmethod> [parameter list]
    Webmethods: Start
                Stop [softtimeout sec]
                Shutdown
                RestartInstance [softtimeout sec]
                StopService
                StartService <SID>
                RestartService
                ParameterValue [<parameter>]
                GetStartProfile
                GetTraceFile
                GetAlertTree
                GetAlerts
                GetEnvironment
                GetVersionInfo
                GetQueueStatistic
                GetProcessList
                GetInstanceProperties
                ListDeveloperTraces
                ReadDeveloperTrace <filename> <filesize>
                ListLogFiles
                ReadLogFile <filename> [<filter> [<language> [<maxentries> [<cookie>]]]]
                AnalyseLogFiles [<severity 0-2>] [<maxentries>] [<starttime YYYY MM DD HH:MM:SS> <endtime YYYY MM DD HH:MM:S
    S>]
                OSExecute <command> <async> <timeout> <protocolfile>
                SendSignal <pid> <signal>
                GetSystemInstanceList
                StartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [<waittimeout sec>]]
                StopSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
                RestartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
                AccessCheck <function>
                ABAPReadSyslog
                ABAPReadRawSyslog
                ABAPGetWPTable
                J2EEControlProcess <processname> <function>
                J2EEGetProcessList
                J2EEGetThreadList
                J2EEGetSessionList
                J2EEGetCacheStatistic
                J2EEGetApplicationAliasList
                J2EEGetVMGCHistory
                J2EEGetVMHeapInfo
                StartWait <timeout sec> <delay sec>
                StopWait <timeout sec> <delay sec>
                WaitforStarted <timeout sec> <delay sec>
                WaitforStopped <timeout sec> <delay sec>
    Exitcode: 0: Last Webmethod call successfull
              1: Last Webmethod call failed, invalid parameter
              2: StartWait, StopWait, WaitforStarted, WaitforStopped timed out
              3: GetProcessList succeeded, all processes running correctly
              4: GetProcessList succeeded, all processes stopped
    Security: Trusted connects without user and password check are possible through
              Unix domain socket or Windows named pipes. Protected webmethods like
              Start or Stop require a trusted connection or OS user and password
              authentication.

  • Unable to start the SAP instance - work processes are terminated

    Hello,
    We are implementing SAP ECC 6.0 on iSeries, i5/OS V5R4.
    The application server & the database server are implemented on one centralized physical iSeries server.
    We recently attempted to copy one SAP system (DEV) from one iSeries server to another, through restoring from an Entire System backup.
    After successfully conducting the restore onto the new (destination) iSeries server, and conducting all the necessary host name changes to be the same as the host name of the source system, we encountered a problem when trying to start the SAP : all the jobs under sub-system R3_00 are started, except the jobs constituting the SAP work processes; i.e. WP00, WP01, …etc.
    The following is the file holding the SAP start log :
    /usr/sap/<SID>/DVEBMGS00/work/sapstart.log
    SAP-R/3-Startup Program Rel 700 V1.8 (2003/04/24)                  
    Starting at 2008/04/07 13:55:49                                    
    Startup Profile: "/usr/sap/PRO/SYS/profile/START_DVEBMGS00_MASAPPRO"
    Execute Pre-Startup Commands                                       
    (47) Local: /usr/sap/PRO/SYS/exe/run/cleanipc 00 remove            
    (47) Executing "/usr/sap/PRO/SYS/exe/run/cleanipc 00 remove"...    
    (47) Okay!                                                         
    (47) Local: CLRLIB LIB(R3WRK00)                                    
    (47) Executing CL command "CLRLIB LIB(R3WRK00)"...                 
    (47) Okay!                                                                     
    (47) Local: /usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n
    (47) Executing "/usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n"...
    (47) Okay!                                                                               
    Starting Programs                                                              
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/saposcol" asynchronously...    
    (47) Okay, child's pid=52.                                                     
    (52) Starting: local /usr/sap/PRO/SYS/exe/run/saposcol                         
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
    (47) Okay, child's pid=53.                                                     
    (53) Starting: local /usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
    (47) Okay, child's pid=54.                                                     
    (54) Starting: local /usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
    (47) Okay, child's pid=55.                                                     
    (55) Starting: local /usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
    (47) Okay, child's pid=56.                                                     
    (56) Starting: local /usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
    (47) Okay, child's pid=57.                                                     
    (57) Starting: local /usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
    (47) Waiting for Child Processes to terminate.                                 
    (47) **** 2008/04/07 13:55:56 Child 53 terminated with Status 0 . ****         
    (47) **** 2008/04/07 13:56:25 Child 54 terminated with Status 0 . **** 
    Thank you in advance for your cooperation.
    Best regards.
    Reda Khalifa

    Hello,
    I did delete all the SAP-related SQL Packages, using the command : DLTR3PKG, then IPL the server, then try to start the SAP system, but with no success (the same previous status)
    As per your request, the following are contents of the four log files :
    dev_disp.new, dev_disp, dev_w0, dev_rd :
    trc file: "dev_disp.new", trc level: 1, release: "700"
    sysno      00
    sid        PRO
    systemid   324 (IBM iSeries with OS400)
    relno      7000
    patchlevel 0
    patchno    98
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        52
    Tue Apr  8 13:47:32 2008
    kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 52) [dpxxdisp.c   1239]
         shared lib "dw_xml.so" version 98 successfully loaded
         shared lib "dw_xtc.so" version 98 successfully loaded
         shared lib "dw_stl.so" version 98 successfully loaded
         shared lib "dw_gui.so" version 98 successfully loaded
         shared lib "dw_mdm.so" version 98 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    WARNING => DpNetCheck: NiServToNo(sapdp00) failed (rc=-3)
    ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c  5217]
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5355]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >MASAPPRO_PRO_00                         <
    DpShMCreate: sizeof(wp_adm)          50960     (1456)
    DpShMCreate: sizeof(tm_adm)          27955928     (27928)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
    DpShMCreate: sizeof(comm_adm)          548064     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1848)
    DpShMCreate: sizeof(wall_adm)          (200056/174328/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 0x700000080000000, size: 28969592)
    DpShMCreate: allocated sys_adm at 0x700000080000000
    DpShMCreate: allocated wp_adm at 0x700000080001ee8
    DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
    DpShMCreate: allocated tm_adm at 0x70000008000e658
    DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
    DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
    DpShMCreate: allocated comm_adm at 0x700000081abf630
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
    DpShMCreate: allocated gw_adm at 0x700000081b45390
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0x700000081b453c0
    DpShMCreate: allocated wall_adm at 0x700000081b453c8
    Tue Apr  8 13:47:33 2008
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ERROR => DpIPCInit2: NiServToNo failed ((null)--3) [dpxxtool2.c  511]
    DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Apr  8 13:47:43 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Tue Apr  8 11:47:43 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    0 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    1 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    2 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    3 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    4 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    5 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    6 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    7 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    8 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    9 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    10 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    11 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    12 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    13 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    14 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    15 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    16 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    17 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    18 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    19 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    20 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    21 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    22 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    23 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    24 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    25 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    26 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    27 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    28 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    29 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    30 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    31 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    32 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    33 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    34 ?         -1 Free          no      0   0             0                                                             
    Dispatcher Queue Statistics               Tue Apr  8 11:47:43 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c   2032]
    Dump of tm_adm structure:               Tue Apr  8 11:47:43 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Tue Apr  8 11:47:43 2008
    =============================
    Slots: 300, Used: 0, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Apr  8 13:47:48 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >MASAPPRO_PRO_00                         < (normal)
    DpJ2eeDisableRestart
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect: shmat key 57 prot 3/0 done
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect: shmat key 57 prot 1/4096 done
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    Stop work processes
    Terminate gui connections
    wait for end of work processes
    not attached to the message server
    cleanup EM
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ShmCreate( 76, 0, 2, 0x0x1808c5508 )
    ShmKeyPermission( 76 ) = 0777 (octal)
    cleanup event management
    cleanup shared memory/semaphores
    ShmCleanup SHM_SYS_ADM_KEY
    ShmCleanup( 1 )
    ShmCreate( 1, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 1, 3 )
    ShmProtect: shmat key 1 prot 3/0 done
    ShmCreate( 1, 0, 2, -> 0x0x700000070000000 )
    ShmCleanup SHM_DP_ADM_KEY
    ShmCleanup( 2 )
    ShmCreate( 2, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 2, 3 )
    ShmProtect: shmat key 2 prot 3/0 done
    ShmCreate( 2, 0, 2, -> 0x0x700000080000000 )
    ShmCleanup SHM_DP_CA_KEY
    ShmCleanup( 3 )
    ShmCreate( 3, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 3, 3 )
    ShmProtect: shmat key 3 prot 3/0 done
    ShmCreate( 3, 0, 2, -> 0x0x700000090000000 )
    ShmCleanup SHM_PF_KEY
    ShmCleanup( 4 )
    ShmCreate( 4, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 4 ) = 0777 (octal)
    ShmCleanup SHM_PRES_BUF
    ShmCleanup( 14 )
    ShmCreate( 14, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 14 ) = 0777 (octal)
    ShmCleanup SHM_CALI_BUFFER
    ShmCleanup( 11 )
    ShmCreate( 11, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 11 ) = 0777 (octal)
    ShmCleanup SHM_DB_TBUFF
    ShmCleanup( 19 )
    ShmCreate( 19, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 19 ) = 0777 (octal)
    ShmCleanup SHM_DB_TBUFF_P
    ShmCleanup( 33 )
    ShmCreate( 33, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 33 ) = 0777 (octal)
    ShmCleanup SHM_DB_STBUFF
    ShmCleanup( 41 )
    ShmCreate( 41, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 41 ) = 0777 (octal)
    ShmCleanup SHM_DB_TTBUFF
    ShmCleanup( 42 )
    ShmCreate( 42, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 42 ) = 0777 (octal)
    ShmCleanup SHM_DB_FTBUFF
    ShmCleanup( 43 )
    ShmCreate( 43, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 43 ) = 0777 (octal)
    ShmCleanup SHM_DB_SNTBUFF
    ShmCleanup( 45 )
    ShmCreate( 45, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 45 ) = 0777 (octal)
    ShmCleanup SHM_DB_IRBUFF
    ShmCleanup( 44 )
    ShmCreate( 44, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 44 ) = 0777 (octal)
    ShmCleanup SHM_DB_OBJ_BUFFER
    ShmCleanup( 54 )
    ShmCreate( 54, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 54 ) = 0777 (octal)
    ShmCleanup SHM_DB_SYNC
    ShmCleanup( 46 )
    ShmCreate( 46, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 46 ) = 0777 (octal)
    ShmCleanup SHM_DB_CUA_BUFFER
    ShmCleanup( 47 )
    ShmCreate( 47, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 47 ) = 0777 (octal)
    ShmCleanup SHM_DB_OTR_BUFFER
    ShmCleanup( 64 )
    ShmCreate( 64, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 64 ) = 0777 (octal)
    ShmCleanup SHM_DB_ESM_BUFFER
    ShmCleanup( 65 )
    ShmCreate( 65, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 65 ) = 0777 (octal)
    ShmCleanup SHM_ROLL_AREA_KEY
    ShmCleanup( 9 )
    ShmCreate( 9, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 9 ) = 0777 (octal)
    ShmCleanup SHM_PAGING_AREA_KEY
    ShmCleanup( 8 )
    ShmCreate( 8, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 8 ) = 0777 (octal)
    ShmCleanup SHM_ROLL_ADM_KEY
    ShmCleanup( 17 )
    ShmCreate( 17, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 17 ) = 0777 (octal)
    ShmCleanup SHM_PAGING_ADM_KEY
    ShmCleanup( 18 )
    ShmCreate( 18, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 18 ) = 0777 (octal)
    ShmCleanup SHM_PXA_KEY
    ShmCleanup( 6 )
    ShmCreate( 6, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 6 ) = 0777 (octal)
    ShmCleanup SHM_ENQ_TABLE_KEY
    ShmCleanup( 34 )
    ShmCreate( 34, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 34 ) = 0777 (octal)
    ShmCleanup SHM_ENQID_KEY
    ShmCleanup( 58 )
    ShmCreate( 58, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 58 ) = 0777 (octal)
    ShmCleanup SHM_VB_ADM_KEY
    ShmCleanup( 7 )
    ShmCreate( 7, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 7 ) = 0777 (octal)
    ShmCleanup SHM_DB_POOL
    ShmCleanup( 40 )
    ShmCreate( 40, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 40 ) = 0777 (octal)
    ShmCleanup SHM_ES2_ADM
    ShmCleanup( 76 )
    ShmCreate( 76, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 76 ) = 0777 (octal)
    ShmCleanup SHM_EM_ADM
    ShmCleanup( 51 )
    ShmCreate( 51, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 51 ) = 0777 (octal)
    ShmCleanup SHM_EM2_ADM
    ShmCleanup( 77 )
    ShmCreate( 77, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 77 ) = 0777 (octal)
    ShmCleanup SHM_EG2_ADM
    ShmCleanup( 78 )
    ShmCreate( 78, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 78 ) = 0777 (octal)
    ShmCleanup SHM_MSBUF
    ShmCleanup( 52 )
    ShmCreate( 52, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 52, 3 )
    ShmProtect: shmat key 52 prot 3/0 done
    ShmCreate( 52, 0, 2, -> 0x0x7000000a0000000 )
    ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
    ShmCleanup( 30 )
    ShmCreate( 30, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 30 ) = 0777 (octal)
    ShmCleanup SHM_JAVA
    ShmCleanup( 70 )
    ShmCreate( 70, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 70 ) = 0777 (octal)
    ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
    ShmCleanup( 56 )
    ShmCreate( 56, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 56 ) = 0777 (octal)
    ShmCleanup SHM_POOL_0
    ShmCleanup( 10 )
    ShmCreate( 10, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 10 ) = 0777 (octal)
    ShmCleanup SHM_PROFILE
    ShmCleanup( 57 )
    ShmCreate( 57, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 57, 3 )
    ShmProtect: shmat key 57 prot 3/0 done
    ShmCreate( 57, 0, 2, -> 0x0x700000020000000 )
    MiCleanup:
    ShmCleanup( 62 )
    ShmCreate( 62, 0, 2, 0x0xfffffffffffe900 )
    ShmKeyPermission( 62 ) = 0777 (octal)
    ERROR => ShmCleanup(62) failed 3 [mpixx.c      3239]
    MpiCleanup() -> 1
    removing Semaphore-Management
    Sem2Lock: LockObjPtr = 0x700000030000158, Yield = 1
    ERROR => e=2 semctl(4,0,IPC_RMID,..) (2: No such file or directory) [semux.c      2098]
    removing request queue
    ShmCleanup( 31 )
    ShmCreate( 31, 0, 2, 0x0xfffffffffffe910 )
    ShmKeyPermission( 31 ) = 0777 (octal)
    ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c   431]
    closing connect handles (dgm + tcp)
    ***LOG Q05=> DpHalt, DPStop ( 52) [dpxxdisp.c   10594]
    shutdown completed - server stopped ***
    Good Bye .....
    trc file: "dev_disp.new", trc level: 1, release: "700"
    sysno      00
    sid        PRO
    systemid   324 (IBM iSeries with OS400)
    relno      7000
    patchlevel 0
    patchno    98
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        9197
    Thu Jan 31 05:54:08 2008
    kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 9197) [dpxxdisp.c   1239]
         shared lib "dw_xml.so" version 98 successfully loaded
         shared lib "dw_xtc.so" version 98 successfully loaded
         shared lib "dw_stl.so" version 98 successfully loaded
         shared lib "dw_gui.so" version 98 successfully loaded
         shared lib "dw_mdm.so" version 98 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >MASAPPRO_PRO_00                         <
    DpShMCreate: sizeof(wp_adm)          50960     (1456)
    DpShMCreate: sizeof(tm_adm)          27955928     (27928)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
    DpShMCreate: sizeof(comm_adm)          548064     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1848)
    DpShMCreate: sizeof(wall_adm)          (200056/174328/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 0x700000080000000, size: 28969592)
    DpShMCreate: allocated sys_adm at 0x700000080000000
    DpShMCreate: allocated wp_adm at 0x700000080001ee8
    DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
    DpShMCreate: allocated tm_adm at 0x70000008000e658
    DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
    DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
    DpShMCreate: allocated comm_adm at 0x700000081abf630
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
    DpShMCreate: allocated gw_adm at 0x700000081b45390
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0x700000081b453c0
    DpShMCreate: allocated wall_adm at 0x700000081b453c8
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Thu Jan 31 05:54:09 2008
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation std
    <ES> Info: use normal pages (no huge table support available)EsStdUnamFileMapInit: ES base = 0x0x7000000d0000000
    EsStdInit: Extended Memory 12288 MB allocated
    <ES> 3071 blocks reserved for free list.
    ES initialized.
    Thu Jan 31 05:54:14 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:14 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:14 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:15 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:15 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:15 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:16 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:16 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:17 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:17 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:18 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:18 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:45 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:45 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:47 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:49 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:51 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:53 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:00 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:02 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:03 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:06 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:08 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:13 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:14 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:18 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:21 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:23 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:25 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:27 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:27 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:28 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:29 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:30 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:32 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1626]
    ***LOG Q0K=> DpMsAttach, mscon ( MASAPPRO) [dpxxdisp.c   11664]
    DpStartStopMsg: send start message (myname is >MASAPPRO_PRO_00                         <)
    DpStartStopMsg: start msg sent
    Thu Jan 31 05:55:32 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:34 2008
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 98
    Release check o.K.
    Thu Jan 31 05:56:06 2008
    MBUF state ACTIVE
    Thu Jan 31 05:56:07 2008
    DpModState: change server state from STARTING to ACTIVE
    Thu Jan 31 05:57:28 2008
    change reqtype of W0 from 1 to 4
    ***LOG Q0V=> DpAdXWpConf, mod_req ( 0DIABTC) [dpxxdisp.c   13661]
    change reqtype of W1 from 1 to 4
    ***LOG Q0V=> DpAdXWpConf, mod_req ( 1DIABTC) [dpxxdisp.c   13661]
    Thu Jan 31 08:00:55 2008
    change reqtype of W0 from 4 to 1
    ***LOG Q0V=> DpAdXWpConf, mod_req ( 0BTCDIA) [dpxxdisp.c   13661]
    change reqtype of W1 from 4 to 1
    ***LOG Q0V=> DpAdXWpConf, mod_req ( 1BTCDIA) [dpxxdisp.c   13661]
    Thu Jan 31 08:44:38 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 12 / sock 19
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.4.135:1179) [nixxi.cpp    4248]
    Network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T42 is 10.2.4.135(10.2.4.135)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (347 ALSALI 42 training4 ) [dpxxdisp.c   11375]
    RM-T42, U347, 900       ALSALI, training4, 08:44:28, M0, W1, SBWP, 2/1
    Thu Jan 31 09:09:27 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 77 / sock 84
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.3.76:1233) [nixxi.cpp    4248]
    Network error of client T109, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T109 is 10.2.3.76(10.2.3.76)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (462 ASEDKY 109 amrsedke ) [dpxxdisp.c   11375]
    RM-T109, U462, 900       ASEDKY, amrsedke, 08:49:14, M0, W1, VA05, 2/1
    Thu Jan 31 09:55:17 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 49 / sock 56
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.14.50:1158) [nixxi.cpp    4248]
    Network error of client T81, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T81 is 10.2.14.50(10.2.14.50)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (364 MHASSAN 81 Motazhassan ) [dpxxdisp.c   11375]
    RM-T81, U364, 900      MHASSAN, Motazhassan, 09:54:12, M1, W6,     , 4/2
    Thu Jan 31 09:55:27 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 108 / sock 51
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.14.52:1158) [nixxi.cpp    4248]
    Network error of client T168, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T168 is 10.2.14.52(10.2.14.52)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (1380 MKADY 168 AtaFathy ) [dpxxdisp.c   11375]
    RM-T168, U1380, 900        MKADY, AtaFathy, 09:54:12, M0, W3, ZSDS, 2/2
    Thu Jan 31 10:01:29 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 122 / sock 129
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.14.53:1144) [nixxi.cpp    4248]
    Network error of client T67, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T67 is 10.2.14.53(10.2.14.53)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (1230 MALGOHARY 67 Mohamedelgoh) [dpxxdisp.c   11375]
    RM-T67, U1230, 900    MALGOHARY, Mohamedelgohary, 09:41:13, M0, W2, FBCJ, 2/1
    Thu Jan 31 10:21:30 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 100 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T100, U402, 900  EABDELHAKAM, EmanHakam, 10:00:29, M1, W1,     , 3/1
    Thu Jan 31 10:25:50 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 65 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T65, U1129, 900        MSAAD, MOHAMMEDSAAD, 10:04:38, M0, W6,     , 2/0
    Thu Jan 31 10:27:50 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 189 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T189, U1638, 000             , MaryRose2, 10:06:37, M0, W5, SESS, 2/0
    Thu Jan 31 11:01:54 2008
    SoftCancel request for T107 U2249 M1 received from REMOTE_TERMINAL
    Thu Jan 31 11:05:12 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 188 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T188, U2347, 900  MABDELGHANY, ManStore, 10:43:54, M0, W10,     , 2/0
    Thu Jan 31 11:12:30 2008
    Network error of client T190, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T190 is 10.2.6.71(10.2.6.71)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (2917 HAEZZ 190 hanyezzeldin) [dpxxdisp.c   11375]
    RM-T190, U2917, 900        HAEZZ, hanyezzeldin, 11:12:18, M0, W3, VELO, 2/1
    Thu Jan 31 11:13:14 2008
    ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c   6846]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]
    -IN-- sender_id DISPATCHER        tid  190   wp_ca_blk   -1      wp_id -1
    -IN-- action    SEND_TO_WP        uid  2917   appc_ca_blk -1      type  DIA 
    -IN-- new_stat  NO_CHANGE         mode 0     len         -1      rq_id 38334
    -IN-- req_info  LOGOFF CANCELMODE
    ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c   6846]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]
    Thu Jan 31 11:13:15 2008
    -IN-- sender_id DISPATCHER        tid  190   wp_ca_blk   4       wp_id 0
    -IN-- action    SEND_TO_WP        uid  2917   appc_ca_blk -1      type  DIA 
    -IN-- new_stat  NO_CHANGE         mode 0     len         8       rq_id 40183
    -IN-- req_info  LOGOFF CANCELMODE
    Thu Jan 31 11:16:53 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 57 / sock 64
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.7.139:1185) [nixxi.cpp    4248]
    Network error of client T86, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T86 is 10.2.7.139(10.2.7.139)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (834 RMOAWAD 86 roshdimoawad) [dpxxdisp.c   11375]
    RM-T86, U834, 900      RMOAWAD, roshdimoawad, 10:56:06, M1, W12, FBL5, 3/2
    Thu Jan 31 11:19:13 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 105 / sock 112
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.7.120:1207) [nixxi.cpp    4248]
    Network error of client T143, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T143 is 10.2.7.120(10.2.7.120)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (552 IFEKRY 143 ibrahimfekry) [dpxxdisp.c   11375]
    RM-T143, U552, 900       IFEKRY, ibrahimfekry, 11:19:06, M0, W1, FB01, 3/1
    Thu Jan 31 11:56:01 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:56:43 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:56:46 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:57:50 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:14 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:41 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:47 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:49 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:50 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:53 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:01 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:02 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:03 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:04 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:05 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:07 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:08 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:09 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:12 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:15 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:20 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:19:50 2008
    DpHdlDeadWp: restart wp (pid=9213) automatically
    Thu Jan 31 12:19:56 2008
    Network error of client T180, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Thu Jan 31 12:19:56 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 12:19:57 2008
    Client address of T180 is 10.2.6.71(10.2.6.71)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (2942 HAEZZ 180 hanyezzeldin) [dpxxdisp.c   11375]
    RM-T180, U2942, 900        HAEZZ, hanyezzeldin, 11:51:33, M0, W0, VELO, 2/1
    Thu Jan 31 12:19:58 2008
    ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6908]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]
    -IN-- sender_id REMOTE_TERMINAL   tid  180   wp_ca_blk   5       wp_id -1
    -IN-- action    SEND_TO_WP        uid  2942   appc_ca_blk -1      type  DIA 
    -IN-- new_stat  NO_CHANGE         mode 0     len         375     rq_id 49950
    Thu Jan 31 12:21:27 2008
    ERROR => W0 (pid 9340) died [dpxxdisp.c   14319]
    Thu Jan 31 12:21:29 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 12:30:53 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 52 / sock 158
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.5.110:1255) [nixxi.cpp    4248]
    Network error of client T113, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T113 is 10.2.5.110(10.2.5.110)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (2713 MMAGDY 113 MOHAMEDMAGDI) [dpxxdisp.c   11375]
    RM-T113, U2713, 900       MMAGDY, MOHAMEDMAGDI, 12:27:33, M1, W8, FB1D, 4/2
    Thu Jan 31 12:39:20 2008
    SoftCancel request for T117 U2416 M1 received from REMOTE_TERMINAL
    Thu Jan 31 12:54:32 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:56:17 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:59:34 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 108 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T108, U4450, 900  EABDELHAKAM, EmanHakam, 12:38:22, M0, W7, FTR0, 2/2
    Thu Jan 31 13:06:12 2008
    ERROR => DpRqCheck: T162 in state TM_SLOT_FREE [dpxxdisp.c   6846]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]

  • How to start the Message Server?

    Hi,
    I wish to start the J2EE engine and for the same it is mandatory to start the Message Server first.
    In order to start the message server, I run the following command:
    <i><b>D:\usr\sap\J2E\SYS\exe\uc\NTI386>msg_server start
    msg_server=>sapparam(1c): No Profile used.
    msg_server=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    [Thr 7972] Wed Jul 25 23:39:18 2007
    [Thr 7972] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
    D00\work [msntserv.c   170]
    [Thr 7972] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c   87]
    [Thr 7972] *** ERROR => mainU: MsSPrvInit [msxxserv.c   1634]</b></i>
    I gave my best time to search for Profile configuration details. But I could not do that.
    <b>Can  somebody tell me how to start the Message Server?</b>
    regards,
    Anand

    Hi Anand,
    Will be good to know what OS are you using...
    If you're tryng to start an instance use <prompt>: startsap pf=<profile of the system you want to start>
    If you logon as <sid>adm just type startsap
    If for some reason you need to start only the message server try  <prompt>: msg_server start pf=<profile of the system you want to start>
    Regards
    Juan
    Please reward with points if helpful

  • Error in starting the BPEL Server

    Hi All ,
    I am new to the BPEL technology and facing problem when I try to start BPEL Server through the "Start BPEL Server" menu.
    This is the error that I get after a few minutes :
    OraBPEL "default" BPEL domain loaded.
    <2007-12-24 18:13:20,317> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://dwus1b018.msc.com:9700
    <2007-12-24 18:13:35,868> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://DWUS1B018:9700/orabpel
    <2007-12-24 18:13:51,404> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://10.10.10.10:9700/orabpel
    <2007-12-24 18:14:07,205> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://dwus1b018.msc.com:9700/orabpel
    <2007-12-24 18:14:22,741> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://localhost:9700/orabpel
    <2007-12-24 18:14:22,741> <ERROR> <collaxa> <ProcessJob::execute> Attempt (1/15)
    ... failed to connect ... retrying in 5 seconds ...
    <2007-12-24 18:15:01,415> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://dwus1b018.msc.com:9700
    <2007-12-24 18:15:57,390> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://10.10.10.10:9700/orabpel
    <2007-12-24 18:16:27,133> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://dwus1b018.msc.com:9700/orabpel
    <2007-12-24 18:17:01,908> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://localhost:9700/orabpel
    Earlier in the begining it reported that the network name and the localhost name are different so I installed a loopback adapter also. Now this problem is no more there but still the server does not boots and when I click on the BPEL Console then I get this message
    "Network Error (dns_unresolved_hostname)
    Your requested host "dwus1b018.msc.com" could not be resolved by DNS.
    For assistance, contact your network support team."
    Please guys help me out , I am badly stuck..........

    Hi ,
    I am badly stuck now . I have the system RAM now 1 GB and when I start the BPEM server then this is the snapshot of netstat command that I get
    H:\>netstat
    Active Connections
    Proto Local Address Foreign Address State
    TCP DWUS1B018:2083 dwus1b018.hsc.com:9700 ESTABLISHED
    TCP DWUS1B018:9700 dwus1b018.hsc.com:2083 ESTABLISHED
    TCP DWUS1B018:1077 DWUS1B018.hsc.com:2084 ESTABLISHED
    TCP DWUS1B018:1531 localhost:2075 ESTABLISHED
    TCP DWUS1B018:2072 localhost:2073 ESTABLISHED
    TCP DWUS1B018:2073 localhost:2072 ESTABLISHED
    TCP DWUS1B018:2075 localhost:1531 ESTABLISHED
    TCP DWUS1B018:1353 ggns1wfs01.hsc.com:microsoft-ds ESTABLISHED
    TCP DWUS1B018:2060 ggnmail01.hsc.com:https CLOSE_WAIT
    TCP DWUS1B018:2062 ggns1wis02.hsc.com:1026 TIME_WAIT
    TCP DWUS1B018:2077 ggns1wis02.hsc.com:microsoft-ds TIME_WAIT
    TCP DWUS1B018:2084 205.177.95.136:ftp ESTABLISHED
    TCP DWUS1B018:2086 205.177.95.136:ftp SYN_SENT
    *********************But soon there is error in the BPEL prompt :****************
    <2007-12-31 12:11:35,304> <INFO> <default.collaxa.cube.engine> <CubeEngine::init>
    OraBPEL "default" BPEL domain loaded.
    <2007-12-31 12:11:57,317> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://dwus1b018.hsc.com:9700
    2007-12-31 12:12:12.933 WARNING OWS-00102 Mapped {http://xmlns.oracle.com/bpel/services/IdentityService}userObject to javax.xml.soap.SO
    APElement userObject. Reason for not creating a custom Java type: use of an unimplemented feature.
    2007-12-31 12:12:12.963 WARNING OWS-00102 Mapped {http://xmlns.oracle.com/bpel/services/IdentityService}groupObject to javax.xml.soap.S
    OAPElement groupObject. Reason for not creating a custom Java type: use of an unimplemented feature.
    2007-12-31 12:12:12.963 WARNING OWS-00102 Mapped {http://xmlns.oracle.com/bpel/services/IdentityService}roleObject to javax.xml.soap.SO
    APElement roleObject. Reason for not creating a custom Java type: use of an unimplemented feature.
    2007-12-31 12:12:12.979 WARNING OWS-00102 Mapped {http://xmlns.oracle.com/bpel/services/IdentityService}userObjects to javax.xml.soap.S
    OAPElement userObjects. Reason for not creating a custom Java type: use of an unimplemented feature.
    **************AND then the prompt hangs at this place :****************************
    0 processes have been loaded for BPEL domain "default".
    <2007-12-31 12:12:34,752> <INFO> <collaxa> <ServerManager::loadProcesses> Done loading processes for all domains
    <2007-12-31 12:12:38,021> <INFO> <default.collaxa.cube.compiler> validating "C:\product\10.1.3.1\OraBPEL_1\bpel\domains\default\tmp\.bp
    el_TaskManager_1.0_63ee83a3d1166eef2f9e56a17e1de896.tmp\TaskManager.bpel" ...
    <2007-12-31 12:12:38,099> <INFO> <default.collaxa.cube.compiler> validating "C:\product\10.1.3.1\OraBPEL_1\bpel\domains\default\tmp\.bp
    el_TaskActionHandler_1.0_5edb841c8a9e176e18a0fe3ad7114fb7.tmp\TaskActionHandler.bpel" ...
    <2007-12-31 12:12:50,635> <INFO> <default.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    Process "TaskManager" (revision "1.0") successfully compiled.
    <2007-12-31 12:12:51,283> <INFO> <default.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    Process "TaskActionHandler" (revision "1.0") successfully compiled.
    <2007-12-31 12:12:51,314> <INFO> <default.collaxa.cube.engine.deployment> Process "TaskManager" (revision "1.0") successfully loaded.
    07/12/31 12:12:51 @#############@##@ CLOB = oracle.lite.poljdbc.CLOB@8433bb
    <2007-12-31 12:12:51,776> <INFO> <default.collaxa.cube.engine.deployment> Process "TaskActionHandler" (revision "1.0") successfully loa
    ded.
    07/12/31 12:12:51 @#############@##@ CLOB = oracle.lite.poljdbc.CLOB@6fdb4b
    ************************At this if I run the BPEL Prompt then this message I get at the explorer Window :************************
    Network Error (dns_unresolved_hostname)
    Your requested host "dwus1b018.msc.com" could not be resolved by DNS. For assistance, contact your network support team.
    *********************At this moment the Netstat command gives this output *********
    H:\>netstat
    Active Connections
    Proto Local Address Foreign Address State
    TCP DWUS1B018:2083 dwus1b018.hsc.com:9700 CLOSE_WAIT
    TCP DWUS1B018:2089 dwus1b018.hsc.com:9700 CLOSE_WAIT
    TCP DWUS1B018:9700 dwus1b018.hsc.com:2083 FIN_WAIT_2
    TCP DWUS1B018:9700 dwus1b018.hsc.com:2089 FIN_WAIT_2
    TCP DWUS1B018:1531 localhost:2075 TIME_WAIT
    TCP DWUS1B018:1531 localhost:2095 TIME_WAIT
    TCP DWUS1B018:2072 localhost:2073 ESTABLISHED
    TCP DWUS1B018:2073 localhost:2072 ESTABLISHED
    TCP DWUS1B018:2093 localhost:9700 CLOSE_WAIT
    TCP DWUS1B018:2096 localhost:1531 TIME_WAIT
    TCP DWUS1B018:9700 localhost:2093 FIN_WAIT_2
    *********Please can anybody help me figure out this error****************

  • While starting the SAP, Disp+Work.exe is getting stopped

    Hi All,
    SAP Discovery System has been installed. While starting the SAP, Disp+Work.exe is getting stopped. But I checked MaxDB and it is working fine.
    Kindly look into the below log dev_disp and advice me the solution.
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      10
    sid        ERP
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    119
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        2420
    Mon Sep 15 20:16:06 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (10 2420) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 119 successfully loaded
         shared lib "dw_xtc.dll" version 119 successfully loaded
         shared lib "dw_stl.dll" version 119 successfully loaded
         shared lib "dw_gui.dll" version 119 successfully loaded
         shared lib "dw_mdm.dll" version 119 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3910
    Mon Sep 15 20:16:11 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ORX-SAPDEMO_ERP_10                      <
    DpShMCreate: sizeof(wp_adm)          17232     (1436)
    DpShMCreate: sizeof(tm_adm)          4270848     (21248)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1544)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06E70040, size: 4929464)
    DpShMCreate: allocated sys_adm at 06E70040
    DpShMCreate: allocated wp_adm at 06E72090
    DpShMCreate: allocated tm_adm_list at 06E763E0
    DpShMCreate: allocated tm_adm at 06E76410
    DpShMCreate: allocated wp_ca_adm at 07288F10
    DpShMCreate: allocated appc_ca_adm at 0728ECD0
    DpShMCreate: allocated comm_adm at 07290C10
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 07311AD0
    DpShMCreate: allocated gw_adm at 07311B10
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 07311B40
    DpShMCreate: allocated wall_adm at 07311B48
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2047 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 2672
      argv[0] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
      argv[2] = pf=
    iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=3500
      argv[5] = -DSAPSYSTEM=10
      argv[6] = -DSAPSYSTEMNAME=ERP
      argv[7] = -DSAPMYNAME=ORX-SAPDEMO_ERP_10
      argv[8] = -DSAPPROFILE=
    iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( iwdfvm2160) [dpxxdisp.c   11799]
    DpStartStopMsg: send start message (myname is >ORX-SAPDEMO_ERP_10                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Mon Sep 15 20:16:12 2008
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 119
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Mon Sep 15 20:16:15 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1428
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3504) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2672)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Mon Sep 15 20:16:51 2008
    ERROR => DpHdlDeadWp: W0 (pid 4952) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W1 (pid 4852) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W2 (pid 5976) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W3 (pid 5000) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W4 (pid 4984) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W5 (pid 1272) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W6 (pid 528) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W7 (pid 5720) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W8 (pid 2648) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W9 (pid 5444) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W10 (pid 5032) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W11 (pid 5620) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:01 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Tue Sep 16 03:17:01 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     4952 Ended         no      1   0        0                                                                         
    1 DIA     4852 Ended         no      1   0        0                                                                         
    2 DIA     5976 Ended         no      1   0        0                                                                         
    3 DIA     5000 Ended         no      1   0        0                                                                         
    4 DIA     4984 Ended         no      1   0        0                                                                         
    5 UPD     1272 Ended         no      1   0        0                                                                         
    6 ENQ      528 Ended         no      1   0        0                                                                         
    7 ENQ     5720 Ended         no      1   0        0                                                                         
    8 BTC     2648 Ended         no      1   0        0                                                                         
    9 BTC     5444 Ended         no      1   0        0                                                                         
    10 SPO     5032 Ended         no      1   0        0                                                                         
    11 UP2     5620 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Tue Sep 16 03:17:01 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Tue Sep 16 03:17:01 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Tue Sep 16 03:17:01 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:06 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ORX-SAPDEMO_ERP_10                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (1516) (SOFT_KILL)
    Stop icman
    killing process (1256) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:1516  HANDLE:1520)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1516  HANDLE:1520)
    wait for end of icman
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:12 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:13 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:14 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:15 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:16 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:17 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1256  HANDLE:1528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1549
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Sep 15 20:17:18 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1256  HANDLE:1528)
    [DpProcDied] Process died  (PID:2672  HANDLE:1504)
    DpStartStopMsg: send stop message (myname is >ORX-SAPDEMO_ERP_10                      <)
    NiIMyHostName: hostname = 'ORX-SAPDEMO'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 3 (r)
    NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Mon Sep 15 20:17:19 2008
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12145]
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 1508 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 1508 (pos=3)
    SiSelNRemove: removed sock 1508
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 1508
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2420) [dpxxdisp.c   10417]
    Good Bye .....
    Thanks in advance.
    Regards,
    Suneetha

    Hi,
    Just check out your filesystem/ directory have sufficient space.
    Do paste us dev_rd as the error above " NiIRead: SiRecv failed for  "
    pasted looks like system uanble to access SAP gateway.
    Rgds
    Radhakrishna  D S

  • Unable to start the SAP

    Hi
    I am starting the SAP through SAP MMC but I am not able to see anything in MMC.
    Also SAPC11_0 server is not getting started.
    After initial investigation I found that there is some profile issue because event viewer says
    Cannot open Profile C:/usr/sap/C11/sys/profile/START_DVEBMGS00_sapserver
    "The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile C:\usr\sap\C11\sys\profile\START_DVEBMGS00_sapserver. (Error 2 ENOENT*: No such file or directory OR: The system cannot find the file specified.  ) [ntservstart.cpp 578].
    Can anyone pl advise on this
    Sukrut s
    Message was edited by:
            sukrut sardeshpande

    Hi
    Sorry for that.
    Please find the details of starup profile.
    ==========
    SAPSYSTEMNAME = C11
    INSTANCE_NAME = DVEBMGS00
    SAPSYSTEM = 00
    SAPGLOBALHOST = sapserver
    #old_value: 4                               changed: SAPUSER 11.10.2007 17:07:01
    rdisp/wp_no_dia = 2
    rdisp/wp_no_vb = 1
    rdisp/wp_no_vb2 = 0
    rdisp/wp_no_enq = 0
    rdisp/wp_no_btc = 1
    rdisp/wp_no_spo = 1
    PHYS_MEMSIZE = 168
    abap/buffersize = 200000
    Signon parameters
    Default client on signon screen
    #login/system_client = 001
    System Language
    zcsa/system_language = E
    #old_value: DE                              changed: SAPUSER 11.10.2007 17:05:11
    zcsa/installed_languages = ED
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    zcsa/table_buffer_area = 6000640
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rtbb/buffer_length = 2000
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rsdb/cua/buffersize = 3000
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    zcsa/presentation_buffer_area = 4400128
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rdisp/appc_ca_blk_no = 100
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rdisp/wp_ca_blk_no = 300
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rsdb/ntab/entrycount = 20000
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rsdb/ntab/ftabsize = 30000
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rsdb/ntab/irbdsize = 6000
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rsdb/ntab/sntabsize = 3000
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    DIR_ROLL = C:\usr\sap\C11\DVEBMGS00\data
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    DIR_PAGING = C:\usr\sap\C11\DVEBMGS00\data
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    DIR_DATA = C:\usr\sap\C11\DVEBMGS00\data
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    DIR_REORG = C:\usr\sap\C11\DVEBMGS00\data
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    DIR_TRANS =
    sapserver\sapmnt\trans
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    DIR_TEMP = .
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    DIR_SORTTMP = C:\usr\sap\C11\DVEBMGS00\data
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    install/codepage/appl_server = 1100
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    abap/use_paging = 0
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    ztta/roll_first = 1024
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    ztta/roll_area = 2000896
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rdisp/ROLL_SHM = 1024
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rdisp/ROLL_MAXFS = 1024
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rdisp/PG_SHM = 1280
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    rdisp/PG_MAXFS = 32768
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    abap/heap_area_dia = 2000683008
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    abap/heap_area_nondia = 2000683008
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    abap/heap_area_total = 2000683008
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    abap/heaplimit = 40894464
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    abap/swap_reserve = 20971520
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    ztta/roll_extension = 2000683008
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    em/initial_size_MB = 168
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    em/blocksize_KB = 1024
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    em/stat_log_size_MB = 20
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    em/stat_log_timeout = 600
    #parameter created                          by: SAPUSER      11.10.2007 17:05:11
    em/address_space_MB = 512

  • Unable to start the weblogic server from windows environment

    Hi All,
    In our training system we have installed the SOA 11g and it worked fine till today afternoon. We have logged off the admin user in windows account and logged with our login credentials into windows after that we are unable to start the weblogic server.
    - Earlier in the DOS command prompt we used to navigate to the path where the startWeblogic.cmd file located and then we execute the command, after that we will able to see the status message as RUNNING MODE in the bottom of the screen, and when ever we deploy an project using Jdeveloper in the weblogic server window some messages will appended based on the action.
    - Only when we issue the command to shut down the weblogic server at that time only the command will be back to the path from where we started the server.
    - After login to windows with our account, when we tried to start the weblogic server, it didn't throw any error instead of that after running few lines in the command window the prompt was back in to the (D:\Middleware\.....\Domains\bin)path from where we ran the command to start the server.
    Please help us to resolve the issue asap.
    Thanks in advance.
    Regards,
    Sathyaseelan

    Hi,
    Make sure that the user which you are using to start weblogic server should be part of Administrator group or the group to which your admin user belongs to.
    Regards,
    Kishore

  • Whenever I start the tomcat server, Im getting an error in netbeans?

    Whenever I start the tomcat server, Im getting an error in netbeans?
    Starting of Tomcat failed. '127.0.0.1' is not recognized as an internal or external command, operable program or batch file.
    Even I set the path & catalina_home in Environment variables. I start the startup.bat file and catalina.bat file also.
    I'm waiting for your quick response.

    Hi Ershad,
    I think this issue is more related to Apache Tomacat, I would suggest you ask in Apache Tomcat forum for a better support, it is appropriate and more experts will assist you.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • How to create multiple PDF files.

    Hi, I have two tables, one with the customer address and another one with a note. May I know how to create a separate PDF file (for each customer) that should start with the customer name/address (from customer table) and followed by a note (from the

  • GX700 CMOS Settings Wrong

    Hi I have a gx700 but it doesn't work. when I try to start it it shows me these errors: CMOS Settings Wrong CMOS Date/Time Not Set Press F1 to Run Setup Press F2 to continue with fail-safe setting But the problem is neither F1 nor F2 works. When I pr

  • Maximum number of TE tunnels on CRS-3 ?

    Hello! For Juniper MX we have the following:         head-end     32000         transit      64000          tail-end     100000 And what maximum number of these parameters for CRS-3/IOS XR 4.x.x ?

  • Defining component use at runtime?

    Hi Developers, Is it possible to define the component usage at runtime with WD4A ? I would need to programmatically define or change the COMPONENT ("class" and not interface to use) at runtime. Then I would create an instance of this component (which

  • How do I stop my iPhoto from "quitting unexpectedly" when I try to import photos?

    How do I stop my iPhoto from "quitting unexpectedly" when I try to import photos? Whenever I try to import photos to iPhoto or even just edit photos on iPhoto, iPhoto quits unexpectedly. When I import a photo, before it is finished, iPhoto closes, an