Comment changer le password de time capsule sans effacer les données deja présente dans time capsule
Comment changer le password de time capsule sans effacer les données deja présente dans time capsule
There is no danger of a reset erasing data..
Look up the info about reset.. the easiest is soft reset and it will simply allow access for 5min with default passwords..
But neither full or factory reset will touch the data..
http://support.apple.com/kb/HT3728
Similar Messages
-
Comment récupérer les données de mon ical dans time machine sous OS Maverick
je ne sais pas où sont les fichiers Ical dans OS maverick et du coup je voudrais les récuperer dans time machine
merci de votre aidePour afficher la bibliothèque, soit il faut maintenir ALT en cliquant sur Aller, soit presser +J après avoir sélectionné l'utilisateur, et cocher la case Afficher la bibliothèque.
-
Comment changer mon compte iCloud sans perdre les données de mon iPad?
Comment changer mon compte iCloud sans perdre les données de mon iPad?
Merci de votre réponse.
Entre-temps, j'ai fais un essai sur quelques unes de mes images selon la procédure décrite plus haut.
Il semble que je n'ai rien perdu. Dans le nouveau catalogue créé, les images dont les originaux ont été déplacés ont conservé leurs mots clés
Je retrouve dans le catalogue d'origine les aperçus dynamiques de mes originaux.
Quelque chose m'a-t-il échappé ?
L'idée de créer un seul catalogue général m'interpelle dans le sens où celui-ci comprendrait plusieurs centaines de milliers d'images...
Comment gérer cela ?
Par avance merci de votre aide
AB -
How to change your password on apple account? I just don't know all my apple I'd info
My question is I want to know my apple account info cause I want to change my password cause someone using it and I don't know who it is they keep restore my touch that's why I wanna change it I know my email and my password but if I change my password it ask me a question about my info but I don't know all my info anymore. Thank you
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeHow to change your Apple ID password if you'd like more information. -
would like to change ,my password. I signed in but I don't know what was my answer for the 2 security question. How can I change my password?
Hello, dot mac & MobtleMe no longer exist, though it may be possible to still use a dot mac addy... or maybe not if expired.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0 -
avec PSE12 je crée mes diaporamas , dans PSE13 je ne retrouve pas ces choix
je trouve que PSE13 se bloque très souvent
je suis très très déçue.Merci de vos réponses j'ai compléte ci dessous:
Message du 22/02/15 08:57
De : "MichelBParis"
A : "Christiane Gauthier"
Copie à :
Objet : COMMENT créer un diaporama dans PSE13 sans utiliser les thèmes proposés (comme dans PSE12) idem peuton céer des catalogue sans les thèmes imposé
COMMENT créer un diaporama dans PSE13 sans utiliser les thèmes proposés (comme dans PSE12) idem peuton céer des catalogue sans les thèmes imposé
created by MichelBParis in Photoshop Elements - View the full discussion
J'ai à peu près les mêmes les mêmes impératifs que vous et je suis très content de la version 13. La différence est simple, je n'utilise jamais les outils de création.
Ce qui domine dans vos soucis est l'inadaptation du module de diaporama. Donc inutile de s'apesantir sur le sujet, le module de la version 13 ne convient qu'à la présentation rapide d'une sélection d'images. Cherchez donc une autre solution. Des amis utilisent Windows Movie Maker, d'autres, plus avancés que moi, utilisent des programmes dédiés qui peuvent parfaitement exploiter les informations que vous aurez écrits dans les métadonnées de vos fichiers. J'utilise les fonctions de Lightroom pour les diaporamas et les galeries web.
En ce qui concerne les 'catalogues', je n'avais même pas remarqué cette erreur de traduction dans les créations. Je suis beaucoup plus intéressé par les livres photos (la seule chose qui restera pour mes petits enfants...) et je gagne beaucoup de temps et de qualité en utilisant mes propres mises en page plutôt que le module d'Elements ou les nombreux logiciels qu'on trouve chez les fournisseurs du Web.
Pour ceci je suis tout à fait d'accord et j'utilise le logiciel de la FNAC généralement pour faire des livres. Mais cette fois ci pour de grandes quantités j'aurais voulu ne taper les légendes qu'une seule fois tout en retouchant les photos qui pour certaines( anciennes) ont besoin d'un sacré rafraichissement.
merci de vos réponses
ChrisGTH a écrit:
J'utilise un ASSUS ROOV avec Windows 8 /64 bits- je traite des fichiers photos de 300 à 400 photos -scans de diapositives ; dans le cadre archivage et transmission des photos de famille et de voyage - mon programme de travail porte sur 16000photos 3900x2600 soit 1.66Mo brutes (datées légendées et pour la plupart retouchées--je voudrais un outil informatique qui m'aide efficacement dans ce projet.
Je maintiens mon catalogue principal autour de 60 000 images (ce qui suppose des éliminations progressives). L'énorme avantage des catalogues (au sens des informations stockées dans leur base de données) et de pouvoir retrouver, regrouper, trier et 'exporter' un projet. Ce projet passe généralement par la création d'albums (le plus souvent temporaires) et l'exportation de fichiers prêts pour le diaporama ou tout autre création (fichiers redimensionnés, optimisés, renommés...) Les métadonnées sont écrites dans les fichiers en fonction des besoins.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7218218#7218218 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7218218#7218218
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
How can I fix my e-mail after I tried to change my password due to a notification that someone in Chile was trying to use my account? Nothing works now.
was your email comprised or your itunes account
-
Bonjour, je voudrais imprimer un tableau avec des images a l'intérieur des cellules.
Cependant lorsque je veux l'agrandir (il ne tient pas sur 1 page) dans l'aperçue avant impression, les images ne suivent pas les cases où elles étaient à l'origine. Comment pourrait-on faire pour les "fixer" aux cellules ?
Merci d'avance pour vos réponsesBonjour
si je comprends c'et de la mise en page
donc dans configuration d'impression il y a échelle du contenu
cliquer sur adapter ou faire glisser le curseur
un peu plus bas les marges pour les agrandir ou les reduires
cordialement -
Touch ID registration scans going over 10 times and if it is done dosen't work after some time
Hi,
i have an iPhone 5s (Gold GSM 16 GB) which was bought last december.Touch Id was working great in the first few months but now its not that efficient.It dosent recognize my finger for long hours at sometimes and then magically works in the morning and then back to the same.I have seen many youtube videos where during registration of the fingerprint it takes around maybe exact 10 scans.But my iphone most of the time during registration takes more scans like 20-35
and most of the time eventually ends up with an error, "Try another finger".I have seen two youtube videos where one guy shows to scan it during registration properly by moving it from center-left-right and repeating it while in the other a guy talks of static electricity affecting the touch id.I tried it both and but the problem i faced was during registration where it takes more scans and after the finger lines gets filled it slightly becomes unfilled again.After two times it worked.Then it worked every single time but something made me make another registration of the same finger where the sides were more scanned then the first registration.Eventually i deleted them(biggest mistake!) and it is not registering again and also if it does it happens after 20 faliures saying try another finger.
Any help would be appreciated!Hello there, omsmac.
The following Knowledge Base article provides a great place to start with some good information that can apply to keyboard issues as well as trackpad:
Trackpad or Magic Trackpad is jumpy or erratic
http://support.apple.com/kb/TS1449
Aside from the usage recommendations, this recommended step is very practical:
If none of the above resolve the issue, try to rule-out software not created by Apple as a cause. To do so, start in Safe Mode.
There are some good steps for testing the keyboard as well found here:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
If the issue persists after attempting Safe Mode, then you may want to try an SMC (System Management Controller) reset. The steps on how to accomplish that are found here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I can't sign into creative cloud since doing a update? I changed my password, got confirmation email saying this was done but it still won't sign in. Please help?
Hi,
Check this document and see if it clears up your problem:
http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
regards,
steve -
Time Capsule - Can't change network password after 10.6.3 update
Has anyone else experience an issue changing the Time Capsule network password after updating to Snow Leopard 10.6.3? If so did you find a work around? After the update I'm no longer able to change the Time Capsule network password when accessing it from Airport Utility. The utility will say that Time Capsule has updated the network password to the new one but when I check keychain it shows the old password. I tried resolving this by deleting the original keychain then changing it again in Airport Utility but it still shows the old password in the keychain and Airport Utility when I reopen the app.
HI,
Checkthe vendor site for Snow Leopard compatibility. The developer may need to update their software.
http://www.toonboom.com/support/
Carolyn -
My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.
Hello,
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over. -
I NEED TO CHANGE THE PASSWORD OF MY TIME CAPSULE BACK UP AND THE WIFI
Hello,
I have a 1 T time capsule which i use to back up and for wifi.. i am fearing of it being abused for cecking out my data. How can change it and prevent this from happening in the future..
Thanks
miksYou can encrypt your backup but this is a very long process.
You may do better to simply wipe the backup and start again.
See Pondini.
http://pondini.org/TM/31.html
Changing wireless password is very easy.. open the airport utility.. click on TC then edit.. and then wireless tab.. and type in a new password.. update. -
cannot receive or send email from my hotmail account, refuses to verify server. I have changed my password, deleted the account numerous times, any solutions? all on ios 6. it was working up until a few days ago and now refuses to load on both my ipad 2 and iphone 4S
in the process deleted all my contact, very annoying.
all help is much appreciated.
interesting that my gmail account does work perfectly.this may or may not help - but give it a try. On a forum some were reporting that talk21 is now under the yahoo umbrella. below are the steps this use listed. (This was an android forum, but the email settings should be the same. In short it looks like their server names have changed. An existing account may have simply been forwarded - but if you are reinstalling, it may want a clean install to the right servers.) Pay particular attention to the server names and port settings. (this thread was started based on a discussion of Imap vs pop - you are already an Imap person - so ignore that part)
See if this helps.
why settle for pop3, when IMAP works with talk21 and not only does mail get pushed out faster with IMAP, but when you click refresh it will be received faster than pop3. The other advantage is subfolders are also supported with IMAP but cant be seen with POP3. This mail feature works with my android eclair & hero phone and the settings are exactly the same for win mobiles also (not tested). The mail setting up roadmap is the same from what i can remember once in the mail feature for win mobi.
This is what you need to do to setup Talk21 email with IMAP.
Incoming server settings
IMAP server - imap.mail.yahoo.com
Port - 143
Security type - none
Outgoing Server settings
SMTP server - smtp.mail.yahoo.com
Port - 25
Security type - none Also important note - Enable 'require sign-in'
and enter your talk21 username and password The End...works a treat for me p.s. Its only taken me 3 years to work it out with win mobile and recently with android. Finally got it to work...hope this helps all the talk21 users out there. if there are any other similar posts out there with no answer...dont forget to mention my name when passing this post around. -
How to fix my Apple ID from not being disabled? I have changed the password many times already and it still wont let me update apps or download apps
Apple ID disabled
http://support.apple.com/kb/TS2446
If you still have problem, contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
Satellite L500-1KK - Which driver to use?
Hi All! I have noticed that Intel have released new drivers for their 4500MHD graphic card, however, the one's released on Toshiba's site for my Satellite L500-1KK are older and are never updated as frequently as those released on Intel's site, my qu
-
I have a clip sent from Pr CS6 to Ae CS6 that had some time remapping applied to speed up a portion of the clip. Although the dynamic link didn't work as expected, moving the in/out points of my clip from Pr in Ae, so that the footage in Ae was wrong
-
I've searched quite a bit but can't seem to locate any stats on what is considered the "normal range" for temperatures. I'm not currently experiencing any problems, but recently got the program "Temperature Monitor" (Bresink) hoping it might read my
-
While on the yahoo home page, I click on the local CBS website for new info. The page loads okay, but then, it shuts the whole browser screen off and I can't get it back on, nor can I use "control-alt-delete" to stop this. It seems like they take ove
-
Mail crash?? - another Gmail IMAP problem...
Hi, This problem seems similar to another recent thread but my Mail app is acting so strangely I think this warrants its own spot. I have been running Mail up till today with two accounts - a Gmail POP account and a college email ('BlitzMail', for an