Comments on the Audigy 2

This post is to all the whiners and complainers regarding the Aud 2 zs. I purchased this card recently and I must say it is truely awesome. It replaced an Audigy 2 Platinum that I thought was excellent. Creative raised the standard in PC sound with the Aud2 zs, and yes the drivers are written correctly.
This card performs superbly in my high end self built system. There is no need as some suggest in
this forum to load third party drivers, enable this disable that, reinstall this reinstall that.
Do a little research (READ) on Creative's support site regarding installation procedures and browse other
forums to see what other people did to insure a smooth installation. Anyway, this is what I did and hope
it could help someone out there:
a. Go into Add/Remove Programs and remove anything that says creative(do not reboot).
b. When this is done go into system properties and enter device hardware. Scroll down to sounds, media click on and remove anything with the creative name on it(now you can reboot)
c. Go get a program( I use system mechanic) and clean out your registry and remove any uninstallers/installers, junk files, broken shortcuts anything in your system that you don need. When thats done go into run type misconfig and and enter your startup. What most people don't realized this is
what causes most problems with sound and video cards. Too many sytem resources are being used on
startup. Disable what your system really doesn't need on startup i.e., AOL,Microsoft Office and etc.....
You will be suprised how fast your system will boot after this is done. Go slow and please remember
what you disabled so if there are any problems you can enable that particular item(Don't forget to reboot
once you are finish)
d. Go to Radio Shack and spend a couple of bucks on a anti-static wrist strap. This might sound geekish
but this inexpensi've item could save you alot of grief and money. Static is a killer of sound cards, video
cards and motherboards.
e. Now power down anything thats plugged into your computer. Lastly power down your computer;
unplug and remove the power cord(Don't forget to wear your anti-static wrist strap). Now open your
computer and remove/install old/new sound card. This is a good time to use a compressed can of
dust remover.
f. After everything is assembled get the Driver CD that came in your retail box and place it in your optic dri've(Now Bootup). After windows acknowledges your hardware let it do its thing. Once thats finished
click on full/custom install. I always use custom. This way I install only the programs that I will actually use or need.
g. Before you attempt to use this card please read Creative's help section. Once thats done test your
system. Its all provided in the Creative Program. Once thats done now you can configure your speakers
i.e. 5.,6., and 7..
I have installed six(6) of these cards in friends and family computers and never a problem. So far as
conflicts with Nvidia chipsets I cannot elaborate whereas I only use Intel.
Finally, do yourself a favor and download winamp and let this puppy ROARRRR.

So you must be more a expert than all other here that you call "whinners"and you can sort all their pcs out i take it, as there is nothing wrong with the creative drivers/apps for ZS cards, is this correct ?
Everyone here that has issues with ZS is in the wrong and it may be nvidia chipsets on their mobos like my NF2 ?, aswell as that intel user i told to turn of HT (amd patent 2002) to make card work.
Im happy for you fact that your happy but its fact that the ZS support in drivers/apps is rubbish or else noone would be here as we all be happy gamming / listening to music, i for one am as happy as i could be on ZS due to this >>>> http://driverheaven.net/showthread.p...644&page=&pp=5
I have owned all but the not so good audigy card (as it wasnt true 24bit and i skipped) from creative so i think im kinda in bit of know how of their support and long waits from new product till getting acceptable drivers/apps, try 2 years + for li've 5. player from launch.
Your info isnt gonna help users who fully formated the pc with ZS and only have o/s mobo and gpu and CREATIVES drivers intalled and it still is rubbish even before they install rest of their software inc antivirus etc, fact is the software isnt 00%, may be less troubleson on some set up and more on others to do with hardware and"OTHER" installed software.
3rd party would be KX Project drivers that i aint ever used but read were good for music not games as no EAX, the above drivers/apps are from Creative for Audigy 4 pro (but fixed), you would be able to install the entertainment centre as you got PLAT and a remote :smileytongue:
BTW i build and fix pc for 4 years and i never use antistatic strap and if you ask in most shops they laugh at you .
It makes me laugh the st time posters that know it all, most us have been here years.
BTW ICE, can you play your dvd audio sample dvd without it makeing noises like a cat be stangled ?.
think i fixed all typos lol
Message Edited by onemoretry on <SPAN class=date_text>02-3-2005 <SPAN class=time_text>02:4 PM
Message Edited by onemoretry on <SPAN class=date_text>02-3-2005 <SPAN class=time_text>02:43 PM
Message Edited by onemoretry on <SPAN class=date_text>02-3-2005 <SPAN class=time_text>02:46 PM
Message Edited by onemoretry on <SPAN class=date_text>02-3-2005 <SPAN class=time_text>03:24 PM
Message Edited by onemoretry on 02-3-2005 03:30 PM

Similar Messages

  • How do I re-number comments in the Comments Summary page?

    Hi,
    When I create a comments summary page, Acrobat 9 organizes comments by page number and numbers them beginning at "1" for each page. Can I change the settings so that I can have the comments organized by page but numbered continuously? In other words, I want to be able to look at the comments on, say, page 7 - but I don't want the first comment on page 7 to be numbered as "1". If it is the 35th comment in the document, I want it to be numbered as "35".
    Does anyone know how I can accomplish this? Any help is appreciated. Thanks!

    You can delete them and re-add them accordingly or you can use random which would show the random order of images.
    Another workaround can be be done using layers, where you can drag the image to the desired position which you want to show in order with slideshow.
    I have created a short video for you , please download from here :
    https://www.dropbox.com/s/v4yto079hh7rc2y/slide.swf
    Thanks,
    Sanjit

  • How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

    Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe.  I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar.  How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!!  I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
    Thanks in advance. 
    Colin

    Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
    Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
    OT

  • How can I move my iPhoto Library from one Mac to another without losing the comments on the individual photos in the process?

    How can I move my iPhoto Library from one Mac to another without losing the comments on the individual photos in the process? The source Macbook (OS 10.4.11 and iPhoto 6.0.6 (3.2.2.)) is with my husband in Germany, the target MacBook Pro (OS 10.8.5, iPhoto 11) is with me in Japan. Thanks for your help.

    I copied the iPhoto Library to a CD and from there to the new MacBook
    If you copied the library to the CD via the Finder it would be no different than the methods Terence suggested.  If you used the Share ➙ Burn menu option from inside iDVD you'll get a mini library that has to be accessed from the open library and the events/alubums copied into the destination library.  Not the same as the other methods.
    The Share ➙ Burn method is no longer supported with iPhoto 9 and later.
    OT

  • How can i remove comments from the "tell your frie...

    How can I remove comments from the "tell your friends how you're doing" section?

    Please do a Skype reset.
    Exit Skype : From the system tray >> right click on the skype icon and click "Quit"
    Press WinKey+R
    Type: %appdata% and press Enter.
    Rename the folder "Skype" to "Old_Skype"
    Run Skype.
    You will need your password to re-log on, and re-set any options from default
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • I have upgraded to Pages 5.0.1 and now I cannot print or pass along "comments" in the text of a document. I previously was able to convert the Pages document, with comments, to a "Word" document so that others could view the edited text. How do I do that?

    I have upgraded to Pages 5.0.1 and now I cannot print or pass along "comments" in the text of a document. I previously was able to convert the Pages document, with comments, to a "Word" document so that others could view the edited text. How do I do that?

    When you installed Pages v5, it automatically moved the older Pages ’09 v4.3 into /Applications/iWork '09 folder. If you want normal comment interoperability, you are advised to resume using the older version of Pages. Newer, is certainly not better with Pages v5.

  • How can I import db column comments into the OBIEE presentation layer?

    We have a very well designed data mart - it is a star schema and all the fact and dimension table columns have comments in them with their definition and use. There is virtually no change required in the physical or business layer. The only modifications done in the presentation layer was to hide the Pk/Fk columns.
    Is there a way to import these column comments into the presentation layer so that the business user can see this comment in the tool tip while hovering over the presentation column in Answers?
    Thanks for your help!

    Hi,
    I assume the comments you mean are stored in user_tab_comments and user_col_comments.
    When this is the case you should do the following:
    Go to your subject area in your presentation layer. For now I assume the name of this subject area is "Subject Area".
    Then right click on this subject area and check "Externalize Descriptions".
    Then create an initialization block (session) using this query:
    (select 'CD_Subject_Area_' || table_name, comments from user_tab_comments)
    union all
    (select 'CD_Subject_Area_' || table_name || '_' || column_name, comments from user_col_comments)
    Use "Row-wise initialization" for this initialization block.
    Two comments:
    1) Like I said, I assume Subject Area is the name of your subject area in your presentation layer, so I guess you need to replace this with the name of your Subject Area.
    But be sure that you replace each space ' ' with an underscore '_'.
    2) Maybe you need to refine above querys by filtering on table_name for those table_names you are using.
    Good luck.
    Regards,
    Stijn

  • Is the Audigy SE cound card fully compatible with Windows Vista

    Hi, all. Is the Audigy SE sound card fully compatible with Windows Vista? I see conflicting posts about this issue. TIA. --
    Bob
    Website: http://www.Property-Aid.com
    E-mail: [email protected]?Exchange ideas and investing tools at our Real Estate Mastermind Group on Yahoo Groups:
    http://preview.tinyurl.com/ypue7o

    Thank you, Mr. Dude. I just posted this question there and look forward to seeing the reply. I appreciate your help. --
    Bob
    Website: http://www.Property-Aid.com
    E-mail: [email protected]?Exchange ideas and investing tools at our Real Estate Mastermind Group on Yahoo Groups:
    http://preview.tinyurl.com/ypue7o

  • What happened to the Audigy 4 (non-pro) drivers on the websi

    I swore a week or so there were seperate drivers for the new Audigy 4 (non-pro) on Creative's site. Now only the Audigy 4 Pro is shown under the download options. What happened? I was going to just use the online drivers with the audio console for an easy install and to ensure I have the lastest drivers.

    Try download them MANUALLY. They're 5.2..6-2.08.00.000.
    .jtpMessage Edited by jutapa on 09-3-2005 04:45 AM

  • How can I print comments in the right margin with Ver X?

    First time with this discussion area.  I'm attempting to print messages in the right margin of the page on which they appear.  This was possible in Ver IX.

    I checked my copy of Acrobat 9, and the only way I could find to print comments on the right side of the page was one of the four versions of comment summary.
    You can do the same thing in Acrobat X. On the Comments panel, select the Options menu (circled) and choose Create Comment Summary.
    Then select the 2nd option in the Create Comment Summary dialog:

  • My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?

    My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?

    Anything?

  • How to skip the Audigy's built-in amplifi

    Is here any way to set the Audigy to source-through mode (line-out/not speaker-out)?
    I connected my audigy's line out to my new external anolog amplifier, and want to skip the built-in amp.
    Need ur help!

    Songtao,
    50% or just a little bit below that should be a good setting for the main output. To be honest though you should get the full range of volume when connecting to an external amp. This is really very much like connecting to a set of powered speakers in that the signal is being amplified at the speakers. You might try connecting a pair of headphones or powered speakers if you have them to see if you notice a drop in quality as you raise the values on them.
    Jeremy

  • If I copy and paste a comment in a pdf, when I create an xfdf file the copied comment isn't included.  Is there a way to add these copied comments to the xfdf file?

    If I copy and paste a comment in a pdf, when I create an xfdf file the copied comment isn't included.  Is there a way to add these copied comments to the xfdf file?

    Hi Steve Whipple,
    This Link (Acrobat Help | Importing and exporting comments ) seems relevant to your query. Please let me know if it helps you export comments to xfdf file.
    Regards,
    Rahul Tyagi

  • SAPSCript how to print  a comment at the end of main window on first page?

    In SAP Scripts, How do I print a comment at the end of the first page (I have several pages of data) in the main window?
    - Ven

    hi
    good
    yes we can put condition.....to display the footer window get printed after all data in main window gets over.........................assingn u r footer window to next page [ i.e u r second page] ...and write the condition
    In such senario no need to use a window for footer.
    In the Script form:
    -> In the Main Window itself after all the main data create an Element.
    -> Use BOTTOM and END-BOTTOM; write your footer information between them.
    In your Driver Program:
    -> After printing all the data (means after passing to form and before closing the form) call one WRITE-FORM with the footer element.
    I'm sure it will work.
    f u r not interested to change the print program. Then simply insert simple code in the footer wondow.
    now insert this code in ur footer window
    IF &TTXSY-PAGE& = &SAPSCRIPT-FORMPAGES&.
    *all code in footer goes here.
    ENDIF.
    &TTXSY-PAGE& holds the page number of current page.
    &SAPSCRIPT-FORMPAGES& holds total form pages.
    This will work.
    write this code then the footer will be printed in last page itself
    /: IF &NEXTPAGE& EQ 0
    whatever footer you want.
    /: ENDIF
    You need to create an element in the MAIN window. You can do it in two ways:
    1. In SE71, you can create:
    /:E FOOTER
    /:BOTTOM
    Text
    /:ENDBOTTOM
    In the print program, just call this element.
    2. In you print program, populate parameter type = BOTTOM in FM, WRITE_FORM.
    Ex.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    element = 'FOOTER'
    type = 'MAIN'
    window = 'BOTTOM'
    EXCEPTIONS....
    However, if you issue new page having new header data. Thus, new item data. And if it will exceed more than 1 page, the footer will still appear. To solve this, you need to create a new element in MAIN. Ex. INIT_FOOTER. It just contains the following:
    /:E INIT_FOOTER
    /:BOTTOM
    /:ENDBOTTOM
    Call this after passing all item data.
    reward point if helpful.
    thanks
    mrutyun^

  • How to enable the bundled remote from the Audigy 4 under Vi

    Hy folks, how can I enable the bundled remote from the Audigy 4 under Vista ? I can't find the software on my CD.
    Greetz Handon

    Hello Rupa,
    I did't get your exact quetion. now your upgrading from version 11.5.9 to 11.5.10. after upgrading only you can set the profile options. As i know we cant change the profile options before upgrading.
    cheers
    Krish....

Maybe you are looking for

  • Can no longer access Graphite Base Station, Please help

    For no apparent reason, my DP 800,10.4.11 can no longer access my Graphite Base Station. For years I have had no problems. But this morning I lost access to my base station. I entered the PW as usual, but it did not allow access. I verified the PW in

  • Migration from 10.2.8 to SL

    I have been using my imac running 10.2.8 for 8 years!! A very nice friend knew I needed a new computer and surprised me with a brand new imac 22" running SL. Imagine my surprise! But, now this is my issue, I have all this "stuff" on my old comp (itun

  • After 2.1 update Eris will not leave POP mail on server

    I've seen some other posts on this, at least one of which said Verizon has acknowledged as a 2.1 issue - but it's not clear if any solution has yet been provided. Since the 2.1 update, if I delete my Verizon e-mail on my Eris it's evidently deleting

  • How to debug LAE function modules in ECC

    Hi, I've been trying to debug sequence of FMs called by LAE during asset creation in ECC. The asset is created for every service contract created in SAP CRM and then replicated to ECC system. While debugging the flow from CRM, I could debug upto ECC

  • Emulator bluetooth connection problem

    Hi! I'm developing a J2ME program with eclipse / WTK 2.5.2 and having problem with connecting two emulators using bluetooth. There is one server and one .client running on two different emulators. The problem is client program cannot discover any blu