Commitment value for service PR not appearing in 12ksta report

We have two types of service PR-- COS & CCV. Although the PR is not deleted, its Deletion indicator in the COOI table in the COS PR is set automatically while same Deletion indicator is not set in the EBAN table.  As a result ZERO Value is appearing in the WGHBTR, WTGBTR,WKGBTR,WOGBTR of the COOI table and zero value in the 12KSTA report. Why this difference of the Deletion indicator in the two tables for the same PR ?
With the similar configuration, there is no problem with the CCV PR .
How do I remove the Deletion indicator from the COOI table for the COS PR ?
Please help.
SM Hussain

Dear Saurav
We checked thru OKKP,CUNI,RKACOR04,RAKANBU01, CJEN. CJBN and including your suggested notes like 152571,47992, 671563, 167350 etc with no results.
We are wondering how Deletion indicator is set in COOI table when the PR is not actually deleted, if you can help us to throw some light on this aspect.
With regards
SM Hussain

Similar Messages

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Sales Order form error  "Not able to retrieve Display values for Service"

    Hi,
    Few of our orders flash the below error message when the order is queried
    "Not able to retrieve Display values for Service"
    Below are the points I observed
    1.The orders I am referring to are imported order via EDI interface.
    2.The service reference type code has value of ORDER, however no other service related fields (like service reference line id) have any values.
    3. The item is not a service item (service tab in Item setup is disabled)
    4. Same item when imported with value of "Customer Ordered" in "service reference type code" field, does not throw an error.
    5. If I update "service reference type code" with value null or change it to CUSTOMER_PRODUCT, the error disappears.
    Can someone explain the significance of this column value and what could have been causing this error message?
    May be there are some dependent fields/setups which must have a value when service reference type code =ORDER.
    Thanks in advance,
    JC
    Edited by: user10174990 on Oct 25, 2012 10:58 AM

    Hi,
    Maintain the dafault values using Tcode OISF with respective to Planning Plant you have to maintain the following values like Order Type, Main Work Center, Maint. Plant,Group,Group Counter,Business Area & Task List type.
    or
    Apply these OSS note 150732 / 195993.
    regards,
    Venkatesan Anandan

  • In ID object Communication Channel - Enter a value for Service Number?

    Hi,
    I have completed all the steps of this link upto 4.5 > 11,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
    but when i activate my messge interfarence from senario tab list or change object tab list, <b>it is showing error that :
    Check Result for Object Communication Channel(GeneratedReceiverChannel_XI )  Enter a value for Service Number</b>
    address type: URL Adress
    target host: my bi server aibid
    Service Number: ?????????
    Path: /sap/xi/engine?type=entry
    What is the Service NO.
    Best Regards,
    Dushyant.

    Hi,
    >>>>The serice number is ur port number. In your XI system URL http://host:port/rep/start/index.jsp
    this is the j2ee port and he should put http port
    as his path is: /sap/xi/engine?type=entry
    on WAS ABAP I guess..
    Regards,
    michal

  • WHT amount not appearing in FBL1N report for Document type RE

    Dear Friends,
    While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
    Regards,
    Ramkumar

    Hi,
    FBL1N is having the classic withholding tax field hence please don't refer the those fields.
    please don't refer those fields.
    Please review attached note 363309 for detailed explanation.
    BSEG-QBSHB is designed to fill for the classic withholding tax. And
    extended withholding tax information is stored exclusive in table
    WITH_ITEM.
    You can check in table BSEG for the fields and will find that system
    do NOT update field BSEG-QBSHB.
    In your line layout,you define a field BSEG-QBSHB. But actully the field
    of vendor/customer line item is filled with zero from FI. Thus,it shows
    zero in line item display.
    And as note 363309 says,
    "Remove the field which contains the withholding tax information
    from your display variant.
    If you want to display the withholding tax information, double-click on
    the document number and subsequently choose 'Withholding tax'."
    Regards
    Madhu M
    Edited by: M Madhu on Jan 18, 2012 9:13 AM

  • VPD: Column Level Masking - Error: ORA-28104: input value for sec_relevant_cols is not valid

    Hi Gurus,
    I am trying to mask the secured column from the table for one specified user, Here is the detail of DB and code which I am using to apply the security:
    DB Version: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    Security Function:
    create or replace function kr_sec_function_papf(p_object_schema IN VARCHAR2,
    p_object_name VARCHAR2)
    return varchar2
    as
    p_nid varchar2(200);
    whoami varchar2(100);
    begin
    if SYS_CONTEXT('USERENV', 'SESSION_USER') = 'VPDTEST'
    then
    p_nid := 'national_identifier = national_identifier';
    return (p_nid);
    else
    p_nid := '1=2';
    return (p_nid);
    end if;
    end kr_sec_function_papf;
    Code to Add Policy:
    BEGIN
    DBMS_RLS.ADD_POLICY(
    object_schema => 'APPS',
    object_name => 'PER_ALL_PEOPLE_F',
    policy_name => 'secure_emp',
    policy_function => 'kr_sec_function_papf',
    statement_types => 'SELECT',
    sec_relevant_cols=>'NATIONAL_IDENTIFIER',
    sec_relevant_cols_opt=>DBMS_RLS.ALL_ROWS);
    END;
    I am getting error while executing the above plsql block, Error is:
    ORA-28104: input value for sec_relevant_cols is not valid
    ORA-06512: at "SYS.DBMS_RLS", line 20
    ORA-06512: at line 2
    Any one please help me to resolve the issue.
    Thanks in Advance.
    ~Krishna Nand Singh

    Hi Every one,
    I got this issue resolved.
    The issue is with parameter object_schema => 'APPS' , the object schema name is 'HR' and APPS has synonym with the same name.
    The Correct code should be:
    BEGIN
    DBMS_RLS.ADD_POLICY(
    object_schema => 'HR',
    object_name => 'PER_ALL_PEOPLE_F',
    policy_name => 'secure_emp',
    policy_function => 'kr_sec_function_papf',
    statement_types => 'SELECT',
    sec_relevant_cols=>'NATIONAL_IDENTIFIER',
    sec_relevant_cols_opt=>DBMS_RLS.ALL_ROWS);
    END;
    Thanks,
    Krishna Nand Singh

  • Mail service does not appear on Webcenter Portal Services page.

    Hi,
    I did the connection to the mail service. But mail service does not appear. why this happen?

    Hi,
    I found where mail taskflow is but I didn't add. because my mail server "ExternalMail" dose not appear on the mail preferences page. I have any idea why? I restarted a few times. I am sory to have wasted your times. I am not WCP specialist. But I have to do.
    Mail service connected. Test connection successful.

  • Why i cannot delate my photos when i press select? Icon for delete is not appear.

    Why i cannot delate my photos when i press select? Icon for delete is not appear.

    Did you use iTunes to sync those photos onto your device? If so then the only way to get them off is to use iTunes to sync them off.
    When you sync them on you choose a folder and say 'put all the photos in here on my iPad', so to take them off you need to deselect that folder or remove photos from that folder and sync to take them off.

  • BAPI_PO_CHANGE does not change LIMIT value for service PO with ref to IDOC

    Hi,
    I am trying to change the limit values for both ACCTASSCAT (K) and item cat (D ie service PO) with ref to message type PORDCH IDOC type PORDCH02, the IDoc is getting posted but the PO is not getting updated ie LIMIT value is not getting change and returning msg "No data changed".
    Could you please provide the way to change LIMIT value.
    Regards,
    Mojammil Khan

    Are you really sure that your IT_SCH has the same fields like POITEM?
    the delivery date and statistical delivery date are located in the schedule tab in ME23N and stored in the schedule table EKET, not in EKPO where the PO item data is stored.
    I think you should assign your IT_SCH to POSCHEDULE

  • Do not want Budget check & Commitment value for purchase Requisition

    Hi Experts,
    I hope you all are doing well.
    My client's requirement is that at the time of Creation of Purchase Requisition there should be no budget check against WBS element and also Commitment value should not be for Purchase Requisition.
    Please suggest.
    Thanks & Regards

    Hi Gokul,
    Thanks for ur quick reply.
    I have done changes in tolerence limit (activated it for PO only).
    Now i created 1 Project PR of more than value of budget (system didnt check the Budget against WBS) but when i am trying to create PO with reference to same PR, system is giving error of budget. That is OK for me.
    Now my requirement is to not take PR value as commitment in my reports, i want only PO value in Commitment column of repport.
    I have read all 3 notes suggested by you. Can u tell me whcih one should i implement to stop PR value as commitment in reports.
    Thanks & Regards

  • Issue in creating limits value for service PR using BAPI_REQUISITION_CREATE

    HI Experts
    I am creating a service PR using bapi bapi_requisition_create.I am able to create service PR successfully, but I am not able to set value for overall limit and the Expected value.
    I am passing the limits values through bapi, but when I am trying to display those value in the limits tab in ME53N, it gives dump.
    Please suggest how can I set the limits value.
    regards
    Ashwini

    Could Ashwini or anyone else please suggest how this issue was resolved? I am using BAPI_REQUISITION_CREATE, but the limits I enter in the REQUISITION_LIMITS table, do not get saved, although the Purchase Requisition itself gets created.

  • Default values for service provider in transaction TRIP

    Hello Gurus...
    We are implementing travel management and I have a problem... here's the scenario
    Tha gl account that should be used for a specific trip recepit depends on the following:
    The expense type
    The company specific type of trip
    The Employee grouping for Travel Management
    What we have done so far is :
    create a service provider for every combination of trip_type/employee_grouping
    create entries in V_T706B4 for every valid combination of expense_type/service_provider
    configure transfer to accounting
    With this configuration the gl account is determined correctly. However this way of solving the situation means that the user must enter the service provider for every recepit entered in the expense report. Given that in our particular scenario the service provider depends on data that has been already entered (type of trip) or that "the system should know" (employee grouping), users are not happy about having to enter the service provider.
    ¿Is there a way to assign default values to the service provider, and would it be possible to code/configure somewhere how to set those default values? I tried doing it through the trip schema, but apparently it is not possible to set a default service provider that way. I also tried setting the values in the user exit (b4 assigning trip number) but this doesn't work since the user exit is called after the standard validation. I also tried implementing subroutine USER_EVAL_RECEIPT, but this doesn't seem to work in transaction TRIP.
    Thanks in advance for any help you may provide!
    Juan Ramon

    Hello AP.
    Thogh your suggestion is helpful (I might use profile parameters somewhere else) thre is no parameter for the field I need. In any case It wouldn't have solved the issue completely, since the default value I need depends on both the employee(user) and the type of trip that's selected.

  • L.C value not appearing in MB51 report

    Dear gurus,
    The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

    Dear Jay,
    It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
    In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated  in the below path
    SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
    Goods receipt made after this change will be triggered the finance document.
    R,
    amala

  • Value in fields " NextServiceDue " not appearing in fleet object

    Hi,
    I've created single cycle maint. plan for a fleet object, with order as a call object,order is scheduled and released  manually,but i am not getting values in Filed "NextServiceDue "& " Order number
    Under TAB  vehicle technology,
    I've gone through thread posted by SAP-PM,
    please provide suggestions,
    Thanks in advance,
    Edited by: Pravin on Jun 8, 2009 10:26 AM

    Dear Mr.Thyagarajan,
    Scenerio is like this,
    i've created a single cycle ,time based maintenance plan with 3 month cycle length,two fuel counters for measuring Fuel consumption and distance travelled is created,
    i am getting average of the fuel consumed/100 km,but i am not getting the value for next service due ,
    i've released the maint order as it was suggested in earlier post,
    please suggest further,
    Best Regards
    Pravin
    Edited by: Pravin on Jun 8, 2009 11:16 AM
    Edited by: Pravin on Jun 8, 2009 11:17 AM

  • Tax classification screen for item level not appearing in sale order under Billing Doc tab

    Hi Expert
    while creating sale order Tax classification screen is not appearing for item level under Billing document tab.
    Tax classification for customer and Material has already maintained. Tax classification screen is not appearing for USER but same time from our USER ID we can able to see that screen.
    please help in above issue. is this related to Authorization issue or other thing need to check.
    Regards
    Pash@SD

    Hi,
    As per standard in Sales Order Document you will be able to see the Tax Classification fields in Billing Tab at Header level (for Customer Tax Classification) and at Item level for (Material tax Classification). The values from Customer M<aster is not populated at Header level as per standard but you can populate the value by using the Exit. Material tax classification populated from material master as you can see that at item level.
    If for one User you are able to see and for other you are not able to see, kindly check first whether both are using same customer and material, and if yes, then check the User Exit.
    Thanks and regards,
    Amitesh Anand

Maybe you are looking for

  • Multiple instances of OC4J on the same machine

    Is there a way to cofigure OC4J to have a few processes on the same machine, all listening to the same ports? My purpose is to develope and deploy a few applications on the same machine, and each application should has its own process, so if onw fail

  • ICal All Day Events

    Hi, Im experiencing problems viewing my month view, i run my business which is holiday lets, off my ICal. I mainly use my month view because i can see availability and communicate this to clients when the call up to book/check availability. My proble

  • Error message "some of your quicktime software is out of date...."

    After about 8 hrs of troubleshooting so far I need help here...please...I have a new ipod touch 3g (32gb) that requires itunes-9 and i have itunes-8. when i try to load itunes-9 i get the same error message about apx. half way thru the install. at th

  • Error in Event Alert

    My requirement is to create an alert which will send a mail when any change is made in the employee information(PER_ALL_PEOPLE_F). I tried with my local instance it is working fine. But when i try to do the same in the client instance. The alert is n

  • Change Created By in process - Create Xellerate User from GTC

    Hello, I configured a GTC recon rule to create new OIM user (xellerate user). The rule is worked, new OIM user has created. I have access policy that auto provisoned AD resource for this new user. The rule is also worked good. Now, I like to change t