Communication Channel Error with MDM PI Adapter

Dear Experts,
We had new sever for PI(image copy). In new PI server we are facing problem only with MDM adapterin communication channel monitoring and below error occuring.
*"  MDM Adapter listener could not start due to: Can not create repository session '<server=SAPMDMD serverUser=Admin repository=TTSL_Vendor_Dev user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'SAPMDMD' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer "
Any expert please help us to resolve this.
Thanks in advance.
Regards,
Hemu.

Hello Heymanth,
Make sure that connection is fine between systems. Test the RFC's in both systems. Also check the services too.
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
/people/ramesh.gulipalli2/blog/2009/11/16/sap-47-to-mdm-integration-using-pi71-part1
Regards
Pothana

Similar Messages

  • JDBC to JDBC Scenario - Communications Channel Error

    I am following the published JDBC to JDBC Scenario:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step-by-step+guides
    I am a 3rd Party Vendor, and I'm using NX7: SAP Exchange Infrastructure. My goal is to have a JDBC Sender that sends MS Access data from my PC to NX7, and have a JDBC Receiver that receives MS Access data, and map the data from one database to the other via XI per the scenario, with both databases on my PC.
    I set up the NX7 SAP XI per the scenario, but I'm getting an error on the NX7 Communications Channel:
    Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
    The data source is in
    C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb on my PC and it is a shared folder. My PC IP 204.245.44.232 is a public IP address. It should be using the JDBC-ODBC bridge driver in the JDK.
    Why am I getting the error?
    Thanks,
    Ed Culnane

    Hi
    Connection Parameters are of given below check
    Transport Protocol: JDBC 2.0
    Message Protocol: XML SQL Format
    Adapter Engine: Integration Server
    JDBC Driver: jdbc.odbc.JdbcOdbcDriver
    Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
    5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
    jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
    Well ms access file should be in the XI Server path or it should be able to accessed by the XI
    Try this above option of keeping u r file in the XI Server path instead of the local
    rgd
    srini

  • Communication Channel Errors to be monitored in CCMS

    Hi,
    We have set up CCMS Monitoring templates for PI monitoring. We have a business requirment to send communication channel errors to the IT team via CCMS
    We have configured ALERTCATEGORIES and defined alert rules.  The communication channel errors result in alerts. These alert categories are visible under the CCMS PI monitoring template.
    What is not getting transmitted is the alert long and short text in CCMS. 
    is there any way to achieve this?
    Please point to how to guide or blogs for the same.
    Thanks
    Abhishek

    Hi Amit...
    Check  the error i got when communication channel is red...
    till now it was working fine.......i tested with a file which has unproper mapping ..and sent it....it gave an error...with mapping exception..(Please do remember..before i sent unproper XML....commmunication channel was green)
    it often happen when i use unproper XML......
    here is the messages it says
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)'
    Edited by: Harsha reddy on Jun 20, 2008 10:01 PM

  • XI Communication Channel Error Explanation

    Hi All,
    Does anyone happen to know :-
    1)  Is it possible to use CCMS to email the errors coming from a communication channel error Explanation field
    2)  Are these messages stored in a table I can check
    The reason I need to know this is because we sometimes encounter an error such as "Conversion of file content to XML failed at position 838: java.lang.Exception: ERROR converting document line no. 839 according to structure 'XXX_XXX_XXX':java.lang.Exception: ERROR in configuration / structure 'XXX_XXX_XXX.': More elements in file csv structure than field names specified!
    This tells us exactly where the error occurred but using Communication Channel Monitoring the error message only remains for a little while before the polling messages remove it from the display.  Since the process runs early hours of the morning we never get to see these messages.
    Any help appreciated.
    Thanks
    Craig

    Hi Raquel,
    Let me try to clear out some things in this thread . First of all you do your alert configuration which you say you have already done. Thats good . Now you ask that you want only to monitor the communication channels and you want specific guide . Here is the specific guide.
    If you have configured alerts you will know that when you create an alert rule you have the option to choose radio button where did the error occur it could be no restriction , integration engine or adapter engine. You need to choose adapter engine.
    Now whenever the colour of the lights change to red. You will get your alerts.
    Regards
    joel
    Edited by: joel trinidade on Apr 9, 2009 9:41 AM

  • Getting end-of-file on communication channel error on this query

    Hi guys,
    I'm getting the end-of-file on communcation channel error when running the following query in SQL PLUS, If run it in a stored procedure called through code of JDBC, it gave "no more data to read from socket" error. Any idea what went wrong? kind of frustrated now. We are using the Oralce 9.0.1.4.0, which suppose to fix some sdo_uion and sdo_buffer bugs. Thanks a lot!!
    select SDO_GEOM.SDO_BUFFER((SELECT SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(GEOLOC, 0.011119487)) FROM GEOTEL_SOURCE where MSA='5000' and COMPANY_NAME ='AMERICAN FIBER SYSTEMS'),1.0,5,'unit=MILE arc_tolerance=0.05') from GEOTEL_SOURCE a where a.MI_PRINX = 1;

    Hi Daniel,
    Just tried the 9.2.0.2 patch, seems to work better now. At least I don't get the end-of-file on communication channel error. But how about the speed thing? I isolated the problem, and find out that sdo_aggr_union is taking too long to finish( 1 Hour!!! for 2300 lines with the same city. Any clue to optimize it, I tried some hint like /*+ordered*/ No_Merge and something like that, does not improve though. Thanks!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • ORA-03113: end-of-file on communication channel ERROR

    After applying Database patch 3095277 to my 9.2.0.1.0 installation
    in order to update it to 9.2.0.4.0,I'm getting ORA-03113: end-of-file on communication channel
    ERRORS when attempting various tasks. This is a local installation running on a Windows XP Workstation.
    I've even tried creating a new test database but the result is the same.
    The reason for moving up to 9.2.0.4.0 is so I can start using Advanced Queuing, which I understand had problems in earlier releases.
    However before the update I could at least create the JMS queue tables without ERROR whereas now I get the following errors when attempting to create a queue table in SQL Plus from within Enterprise Manager Console.
    SQL*Plus: Release 9.2.0.4.0 - Production on Thu Sep 18 08:20:08 2003
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected.
    BEGIN SYS.DBMS_AQADM.CREATE_QUEUE_TABLE(Queue_table=> 'JMSQTBL',Queue_payload_type=>'SYS.AQ$_JMS_STREAM_MESSAGE',multiple_consumers=> false); END;
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    BEGIN SYS.DBMS_AQADM.CREATE_QUEUE(Queue_name=> 'JMSQUE',queue_table=> 'JMSQTBL'); END;
    ERROR at line 1:
    ORA-03114: not connected to ORACLE
    I would be grateful of any pointers as to how to resolve this problem.
    Regards
    Gary.

    Chris, Thanks for the suggestion,
    I took a look in the trace log and found the following entries that point to a ORA-00600 as you mentioned earlier.
    This is only a test database so there's no great loss if
    I have to re create it, but in saying that I did create a new test02 from scratch and had the same problem.
    Is it posible something went wrong when applying the 9.2.0.4.0 patch ?.
    Regards
    Gary.
    Dump file c:\oracle\admin\test01\udump\test01_ora_2556.trc
    Wed Sep 17 16:25:14 2003
    ORACLE V9.2.0.4.0 - Production vsnsta=0
    vsnsql=12 vsnxtr=3
    Windows 2000 Version 5.1 Service Pack 1, CPU type 586
    Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.4.0 - Production
    Windows 2000 Version 5.1 Service Pack 1, CPU type 586
    Instance name: test01
    Redo thread mounted by this instance: 1
    Oracle process number: 10
    Windows thread id: 2556, image: ORACLE.EXE
    *** 2003-09-17 16:25:14.046
    *** SESSION ID:(7.17) 2003-09-17 16:25:14.031
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** Object defn.s out of sync w/ data
    *** 2003-09-17 16:25:14.281
    ksedmp: internal or fatal error
    ORA-00600: internal error code, arguments: [qmxiUnpPacked2], [121], [], [], [], [], [], []
    Current SQL statement for this session:
    select 1
    from resource_view
    where any_path = '/xdbconfig.xml'
    ----- PL/SQL Call Stack -----
    object line object
    handle number name
    6A4FA348 6 package body XDB.DBMS_REGXDB
    6A504D88 1 anonymous block
    6A576AB8 639 package body SYS.DBMS_REGISTRY
    6A1DBB6C 1 anonymous block

  • Regarding the JDBC Communication Channel error

    Hi all,
    We installed one non-central adapter engine for our xi server. But when configuring jdbc channels with this non-central adapter engine, the jdbc channel not picking data from tables, instead it is always showing message "Processing Started". All the channels configured with central adapter engine are working fine. Basis person is working on this problem for 10 days, he didn't find any solution. Pls help us.
    Note:-when we start the channel configured with non-central adapte engine, the channel is automatically getting lock in visual admin. Even though we will release the lock manually, after starting once again it is getting locked again.
    thanks,
    madhusudhan.

    hi,
    Is your decentral adapter engine working fine for other communication channels.There might be some problem in your decentral adapter engine installation.
    You can refer to my blog on this.
    Basic Steps In Decentralized Adapter Engine
    regards,
    ujjwal kumar

  • End of communication channel error

    While working with our application developed in VB, In some times when I use describe command in sql * plus, giving "end of communication channel error" and getting disconnected from the database. Select and other DML commands are working well.
    Any suggestions please...
    Thanks in advance....
    UMAMAHESWARA REDDY

    Check the alert log and with your network people for any errors.

  • Reporting communication channel errors in emails from alert monitoring

    Does anybody know how to capture the error message reported on the communication channel and send it in the dynamic text of the email configured for alert monitoring?
    I get the mapping error messages but all other message container element values seem to be blank.
    None of the container elements (standard) defined seem to have the channel error message. in PI 7.0
    Thx

    Hi,
    You can get all the alerts that were captured by the adapter monitoring i.e, communicaiton channel errors etc.
    we can also trigger similar alerts for Adapter also when any adapter truns in to RED.
    in RWB->Alert configuration-> choose adapter engine errors also then you will get alerts for adapter failure also.
    If you need create alerts for each communication channel. in RWB->Alert montoring->Adapter type-> instead of giving * select indival commnication channel
    for this you need to have alter configured for each Commnication channel in Alrtcatdef and RWB. so for each in RWB you select corerspoding communication channel.
    You can monitor the sender and receiver service in CCMS, but I don't think you can monitor the commuication channels.
    http://help.sap.com/saphelp_nw04/helpdata/en/45/e32b64f87c6f74e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/28/83493b6b82e908e10000000a11402f/frameset.htm
    Thanks
    Swarup

  • Communication channels error during update

    Hello,
    All the Communication channels of the XI QA system are showing a status "Error during Update"  Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
    com.sap.aii.af.service.administration.api.AdminException: Unable to
    retrieve channel runtime status: EventException:
    com.sap.engine.frame.cluster.message.PartialResponseException: One or
    more of the destinations did not return a response. Response status:
    [303228750-RTOE,303228751-RTOE,303981451-OK].
    Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
    Thanks in advance.
    Regina

    Hi Regina,
    ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
    Thanks,
    Rajeev Gupta

  • End of communication channel error on second execution

    a select view over a database link will return results once but on second execution returns end of communication channel error.
    i have lots of other views working fine this way. the problem view did work but has started failing. .
    running the view on the database which is running the htmldb application in a sqlplus session (which is the same schema which htmldb is using for the application) works fine. it is only htmldb which is showing the problem both from within the application and the sql workshop

    Hi,
    For a 'serious' error like that you will probably want to work with Oracle support who will be able to work with you to resolve the problem.

  • Oracle ORA-03113: end-of-file on communication channel error

    Hi,
    I am new to oracle. I need your help.
    I got oracle error on client site while running SQL.
    Oracle ORA-03113: end-of-file on communication channel error
    Process ID: 18805
    Session ID : 1610 Serial number: 15367I looked alert.log which is given below
    Fri Apr 02 14:36:27 2010
    Thread 1 advanced to log sequence 34069
      Current log# 1 seq# 34069 mem# 0: +DATA/store/onlinelog/group_1.272.648383369
    Fri Apr 02 15:10:11 2010
    Trace dumping is performing id=[cdmp_20100402151011]
    Fri Apr 02 15:10:41 2010
    Reconfiguration started (old inc 40, new inc 42)
    List of nodes:
    0
    Global Resource Directory frozen
    * dead instance detected - domain 0 invalid = TRUE
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Fri Apr 02 15:10:41 2010
    LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
    Fri Apr 02 15:10:41 2010
    LMS 1: 2 GCS shadows cancelled, 0 closed, 0 Xw survived
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Post SMON to start 1st pass IR
    LMS 1: 13458 GCS shadows traversed, 0 replayed
    LMS 0: 13700 GCS shadows traversed, 0 replayed
    Submitted all GCS remote-cache requests
    Fix write in gcs resources
    Fri Apr 02 15:10:42 2010
    Instance recovery: looking for dead threads
    Beginning instance recovery of 1 threads
    Reconfiguration complete
    parallel recovery started with 3 processes
    Started redo scan
    Completed redo scan
    1148 redo blocks read, 100 data blocks need recovery
    Fri Apr 02 15:10:43 2010
    Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p001_31604.trc:
    Fri Apr 02 15:10:43 2010
    Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p000_31602.trc:
    Fri Apr 02 15:10:43 2010
    Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p002_31619.trc:
    Started redo application at
    Thread 2: logseq 16481, block 37508
    Recovery of Online Redo Log: Thread 2 Group 3 Seq 16481 Reading mem 0
      Mem# 0: +DATA/store/onlinelog/group_3.280.648386385
    Completed redo application
    Completed instance recovery at
    Thread 2: logseq 16481, block 38656, scn 44063421381
    87 data blocks read, 101 data blocks written, 1148 redo blocks read
    Switch log for thread 2 to sequence 16482
    Fri Apr 02 15:10:50 2010
    ARC3: Archiving disabled thread 2 sequence 16482
    Fri Apr 02 15:13:50 2010
    Reconfiguration started (old inc 42, new inc 44)
    List of nodes:
    0 1
    Global Resource Directory frozen
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Fri Apr 02 15:13:50 2010
    Fri Apr 02 15:13:50 2010
    LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
    LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    LMS 0: 7881 GCS shadows traversed, 4001 replayed
    LMS 1: 8015 GCS shadows traversed, 4001 replayed
    LMS 1: 5437 GCS shadows traversed, 2737 replayed
    LMS 0: 5797 GCS shadows traversed, 2941 replayed
    Submitted all GCS remote-cache requests
    Post SMON to start 1st pass IR
    Fix write in gcs resources
    Reconfiguration completeHere is trace files
    cat *STORE1_p001_31604.trc*
    Trace file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p001_31604.trc
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, Real Application Clusters, OLAP, Data Mining
    and Real Application Testing options
    ORACLE_HOME = /opt/oracle/product/11.1/db_1
    System name:    Linux
    Node name:      datastore1.bakcell.com
    Release:        2.6.18-53.el5PAE
    Version:        #1 SMP Sat Nov 10 18:33:42 EST 2007
    Machine:        i686
    Instance name: STORE1
    Redo thread mounted by this instance: 1
    Oracle process number: 83
    Unix process pid: 31604, image: [email protected] (P001)
    *** 2010-04-02 15:10:43.094
    *** SESSION ID:(1576.36581) 2010-04-02 15:10:43.094
    *** CLIENT ID:() 2010-04-02 15:10:43.094
    *** SERVICE NAME:(SYS$BACKGROUND) 2010-04-02 15:10:43.094
    *** MODULE NAME:() 2010-04-02 15:10:43.094
    *** ACTION NAME:() 2010-04-02 15:10:43.094
    2010-04-02 15:10:43.093954 : Start recovery for domain=0, valid=0, flags=0x1
    *** 2010-04-02 15:10:44.868
    KCRP: blocks claimed = 34, eliminated = 6
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 40/40 = 1.0
    Max compares per lookup = 0
    Avg compares per lookup = 0/40 = 0.0
    *** 2010-04-02 15:10:50.249
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 40/40 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 604/604 = 1.0
    cat *STORE1_p000_31602.trc*
    Trace file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p000_31602.trc
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, Real Application Clusters, OLAP, Data Mining
    and Real Application Testing options
    ORACLE_HOME = /opt/oracle/product/11.1/db_1
    System name:    Linux
    Node name:      datastore1.bakcell.com
    Release:        2.6.18-53.el5PAE
    Version:        #1 SMP Sat Nov 10 18:33:42 EST 2007
    Machine:        i686
    Instance name: STORE1
    Redo thread mounted by this instance: 1
    Oracle process number: 71
    Unix process pid: 31602, image: [email protected] (P000)
    *** 2010-04-02 15:10:43.094
    *** SESSION ID:(1565.49022) 2010-04-02 15:10:43.094
    *** CLIENT ID:() 2010-04-02 15:10:43.094
    *** SERVICE NAME:(SYS$BACKGROUND) 2010-04-02 15:10:43.094
    *** MODULE NAME:() 2010-04-02 15:10:43.094
    *** ACTION NAME:() 2010-04-02 15:10:43.094
    2010-04-02 15:10:43.093855 : Start recovery for domain=0, valid=0, flags=0x1
    *** 2010-04-02 15:10:44.433
    KCRP: blocks claimed = 30, eliminated = 4
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 34/34 = 1.0
    Max compares per lookup = 0
    Avg compares per lookup = 0/34 = 0.0
    *** 2010-04-02 15:10:50.246
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 34/34 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 666/666 = 1.0
    cat *STORE1_p002_31619.trc*
    Trace file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p002_31619.trc
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, Real Application Clusters, OLAP, Data Mining
    and Real Application Testing options
    ORACLE_HOME = /opt/oracle/product/11.1/db_1
    System name:    Linux
    Node name:      datastore1.bakcell.com
    Release:        2.6.18-53.el5PAE
    Version:        #1 SMP Sat Nov 10 18:33:42 EST 2007
    Machine:        i686
    Instance name: STORE1
    Redo thread mounted by this instance: 1
    Oracle process number: 84
    Unix process pid: 31619, image: [email protected] (P002)
    *** 2010-04-02 15:10:43.095
    *** SESSION ID:(1578.22258) 2010-04-02 15:10:43.095
    *** CLIENT ID:() 2010-04-02 15:10:43.095
    *** SERVICE NAME:(SYS$BACKGROUND) 2010-04-02 15:10:43.095
    *** MODULE NAME:() 2010-04-02 15:10:43.095
    *** ACTION NAME:() 2010-04-02 15:10:43.095
    2010-04-02 15:10:43.095010 : Start recovery for domain=0, valid=0, flags=0x1
    *** 2010-04-02 15:10:44.551
    KCRP: blocks claimed = 25, eliminated = 1
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 26/26 = 1.0
    Max compares per lookup = 0
    Avg compares per lookup = 0/26 = 0.0
    *** 2010-04-02 15:10:50.250
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 26/26 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 246/246 = 1.0
    ----------------------------------------------I don't understand what does it mean which is written in alert.log.
    Yhanks in advance.

    please check below files:
    Fri Apr 02 15:10:43 2010
    Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p001_31604.trc:
    Fri Apr 02 15:10:43 2010
    Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p000_31602.trc:
    Fri Apr 02 15:10:43 2010
    Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p002_31619.trc:
    Edited by: Prathmesh on Apr 2, 2010 5:01 PM

  • Weird ORA-03113: end-of-file on communication channel error

    Hi,
    I am running a simple select distinct query (actually it is a little complex), and when I run it I keep getting the ORA-03113: end-of-file on communication channel error. Now it has been working fine all time until today. I checked the trace files that it generated but nothing stands out. It is only this one specific query that kills it. I checked on Metalink, but no help there. Can someone please shed some light on this.

    So last night I started to think it might just be the query that is giving us the problem so I started to work on the query and came across something very interesting. This is the query that the user is using:
    SQL> select distinct
    2 rqms.ALERT_ID_NEW as ALERT_ID, (site.NAME || ' (' || site.COUNTRY_REGION || ')') as Customer,
    3 rqms.START_DTTM as Time, RPAD(rqms.SUM_NODE_WDTIME/60, 18) as Weighted_Downtime,
    4 RPAD( (rqms.SUM_NODE_DURATION/60) ||' min.', 15) as Duration, rpad(al.CL_PART_NO, 15) as Product,
    5 rpad(al.CL_REVISION, 10) as Revision, case.title
    6 from csalert.alert_call_info al, csalert.ALERT_INCIDENTS ai, clarify.cs_case case,
    7 clarify.cs_site site, csalert.rqms_incidents rqms, CLARIFY.CS_PRODUCT_INFORMATION prod
    8 where al.ALERT_ID = ai.ALERT_ID
    9 and al.srid = case.case_id
    10 and case.CSR_CALLERSITE = site.CALLERSITE_OBJID
    11 and al.alert_id = rqms.alert_id
    12 and case.CSR_HARDWARE_PART = prod.PRODUCTINFORMATION_OBJID
    13 and (prod.FAMILY = 'Services Edge Router' or prod.FAMILY = 'SHASTA')
    14 and al.START_DTTM >= trunc(sysdate - 1)
    15 order by (site.NAME || ' (' || site.COUNTRY_REGION || ')')
    16 /
    If you look at line 14 with the trunc statement...well it seems like when I tried to re-write this query piece by piece, it would work, but as soon as I would bring back this line it would fail with the error mentioned in this postings.
    This morning I came in and the user is complaining about another query acting the same way. So I performed the same steps as I did above and would you believe it...the new query also had a couple of lines where it used the trunc function. I removed them and re-ran the query with 100% success. So since the patch was applied, it seems like we are having problems with the trunc function it would seem like. This problem has gotten to just plain weird for me. I am completly lost here now.
    What do you think?

  • End-of-communication channel error from client

    In my server oracle(oracle9i enterprices edition) is working fine but from client side i'm getting the following error
    *end-of-communication channel error
    But my network is working fine
    anyone can you give me the solution for this problem....?
    Message was edited by:
    user497084

    checkout TNSPING <service name> from cmd prompt
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\NJi>tnsping issl
    TNS Ping Utility for 32-bit Windows: Version 2.3.2.1.0 - Production on 25-OCT-06
    14:36:06
    Copyright , 1996(c) Oracle Corporation 1995. All rights reserved.
    Attempting to contact (ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=198.1.2.
    15)(Port=1521))
    OK (100 msec)

  • Encounter "ORA-03113 : end-of-file on communication channel error "

    Hi experts :
    I schedule a job of MS SSIS(SQL 2005) to do data transfer from Oracle to MS sql server every morning. Few days ago, SQL server report an error as bellow
    錯誤: 2010-05-26 06:04:27.87
    代碼: 0xC0202009
    來源: Package 連接管理員 "pro.twacelifeapp"
    描述: 發生 OLE DB 錯誤。錯誤碼: 0x80004005。
    有 OLE DB 記錄可用。 來源: "OraOLEDB" Hresult: 0x80004005 描述: "ORA-03113 : end-of-file on communication channel error"。
    錯誤結束
    "ORA-03113 : end-of-file on communication channel error " happened.
    many times It makes SSIS interupt. And the wierd thing is, as I restart SSIS again. Then the process done successfully.
    I check Oracle alert.log at the event time, it report "inbound connection timed out (ORA-3136)".
    sqlnet.log also list "TNS-12535: TNS:operation timed out".
    from the day on, MS SQL server reported this error msg everyday.
    I'm really confused and can't find the result of cause.
    dose any helps ,thanks~
    SQL server version : SQL server 2005
    Oracle : Oracle 10g r2

    ORA-03113: end-of-file on communication channel
    Cause:      The connection between Client and Server process was broken.
    Action:      There was a communication error that requires further investigation. First, check for network problems and review the SQL*Net setup. Also, look in the alert.log file for any errors. Finally, test to see whether the server process is dead and whether a trace file was generated at failure time.
    Regarda
    Asif Kabir

Maybe you are looking for

  • I can no longer determine a calendar alert snooze time?

    I'm very dependent on my calendar alerts and use them for recurring events like bill paying and unique events like meetings and doctor appointments. Up until OS 10.7 (Lion), when an alert popped up and I wanted to continue being alerted of that event

  • Acrobat X closes immediately when PDF is double clicked

    I run CS6 (English) on Windows 8 (German). If I double click a PDF Acrobat opens and immediately closes again. I can drag the PDF document on window head and the document opens fine. I can also click to a PDF that is pinned to the task bar and it ope

  • Can it be done (drill into another application seamlessly from dashboard)

    Is it possible to drill from a BI EE Dashboard report directly into another non-Oracle web based application? For instance, we move budget data at a summarized level into our data warehouse, which is available as a report in BI EE. If the user wants

  • How to force note attachment in an approval process ?

    Hello experts, I am trying to find a solution in order to force an agent to write a note as attachment, during an approval workflow process, especially when the agent rejects. Does somebody already implement such solution, and how ? Thanks in advance

  • Visual page appearence in various browsers different?

    I am having a problem with pages created in iWeb, published to a local folder, then uploaded via Fetch to a hosting service. I am creating my company logo using WYSIWYG in iWeb, however when published, the elements are shifting and in some cases I am