Company code restriction for dashboard and webi reports in BOBJ

Hi Friends,
We have a requirment where we need to restrict user on company code level in bobj.
we have some dashborads and webi reports which need to be restricted at company code level, hence i have created a role in BI and restricted the queries (bex queries) on company code level and same role and user i have imported in BOBJ.
Now i can see the role and user in BOBJ and also i can login to BILAUNCH PAD with authentication as SAP But unable to run the webi reports and dashboard hence i have added those reports to this user in bobj and now i can run the reports, but restriction is not working.
In BI I am able to restrict user but in bobj its not restricting. kindly let me know if i am missing anything?
We are having BO 4.0 SP6.
Thanks
Basis

Hi Saurabh,
In BI its wokring perfectly fine.
I can run the query for specific company code and data is being populated as the respective compay code.
I have also configure SSO between BI & BO using below link
http://wiki.scn.sap.com/wiki/display/BOBJ/How+to+setup+SSO+against+SAP+BW+with+SAP+BO+BI4.0+Common+Semantic+Layer+%28UNX%29+or+BICS
but when i am trying to create a olap connection in IDT with SSO connection test is getting failed with belwo error.
com.businessobjects.mds.olap.OlapException: [Internal] SSO token or User password is empty.
I checked STS is already there in APS .
Thanks
Basis

Similar Messages

Company code currency for debit and credit information

hi
i am uisng 0fi_ap_4
Debit amount in Company code currency
Credit amount in company code currency
Cash discount amount (Company Currency)
in above cases what fields i need to take form 0fi_ap_4 datasource?
company code currency means will be local currency?

Hi Reddy,
True the local currency means the company code currency, because the infoobject 0LOC_CURRCY is liked to the field
LCURR from the source T001-WAERS (T001 is company codes table).
And the related fields for the infoobjects are:
Infoobject                Description                                Field in Datasource          Source
0CREDIT_LC            Credit amount in local currency         DMHAB                            Calculated
0DEBIT_LC              Debit amount in local currency          DMSOL                            Calculated
0DSC_AMT_LC       Cash discount amount                      SKNTO                             BSIK- SKNTO
Regards.
Yacine.
Edited by: Yacine Bradai on May 5, 2010 3:12 AM
Edited by: Yacine Bradai on May 5, 2010 3:16 AM
Edited by: Yacine Bradai on May 5, 2010 3:17 AM
Edited by: Yacine Bradai on May 5, 2010 3:19 AM
Edited by: Yacine Bradai on May 5, 2010 3:19 AM

Document integration for Bex reports and web reports

Hi,
I would like to attach few documentaion (like business usage of the report) for all existing reports in BW system. We are delivering all reports through Bex reports and Web reports.
Report user should be able to see attached documentation through "Document" property in Web report.
I have followed this way but not able to get on-line documentation for queries.
1. RSA1--> Documents >Meta Data> selected Object type ELEM> Import document> attached word document.
2. I enabled Documents property in Query designer.
3. When I executed this query in Bex, I could see document symbol for all characteristics & Key figures in all cell (in default view)
4. The same result with Web report (all cells are having document symbol).
But I dont want to display documents in defaul view, if any user wanted to have doucment info, then should click on "document" tab and should be able to down load / read on line.
Let me know why I am getting document symbol for all key / char, even though i selected "ELEM". I know we could direclty import documents in query designer, what is the difference..
Rgds..

Hi,
Anybody could provide step to step procedure for doucument integration for Bex reports.
Best regards,

No company code found for plant 0001 and sales organization 0001

Hi BW Experts,
I am using the datasource 0PLANT_ATTR.While loading the data, i am getting the warning message as "No company code found for plant 0001 and sales organization 0001". I have replicated all the Currencies by using the "Global Settings".Do i need to do any settings in BW Side.
Please help on this Issue.
Thanks,
Ram

Hi Ram,
It is not pertaining to the Currency translations or any?
The warning message is because:
In the 0PLANT there is 0comp_code as attribute; while loading the data from 0PLANT_ATTR datasource there for that particular PLANT "0001" and Sales Org "0001" system couldnt find the 0comp_code.
As it is not maintained in the R/3 system.
This is why the warning messages are coming out..
Hope you understood...
Regards,
Ravi Kanth

Integration from dashboard to WebI report in BI 4.0

Hi All,
I have migrated dashboards(created in Xcelsius 2008 SP3), reports (created in BOXI 3.1), and corporate dashboards(Created in BOXI 3.1 environment) to SAP BI 4.0 environment. The dashboards and reports are working fine when they are not integrated with each other. The corporate dashboards(BI Workspaces in BI 4.0) contains a dashboard and a report. According to the selections in the dashboard, the report should be triggered with the parameters passed from the dashboard. But when I migrated, the BI workspaces are not passing the parameter from the dashboard to report. I had verified the parameter passing and Content linking.
Since I am new to SAP BI 4.0, I am not aware of the problems may happen in the migration of Corporate dashboards from BOXI 3.1 to BI 4.0. So can anyone please help me to solve this issue?
Thanks,
Neelakandan

Hi Neelakandan,
I have never worked with FS commands. But i doubt some restrictions are there for FS commands in adobe flash 9 and above. Please confirm it by referring the topic 8.2.3 FS command restrictions in the Dashboard and presentation design user guide. see the link below.
http://help.sap.com/47E58634-D0F0-4AEB-B89A-A4F625A26C85/FinalDownload/DownloadId-C85B951012096D7CE4FB50BA5CB6AF6A/47E58634-D0F0-4AEB-B89A-A4F625A26C85/businessobject/product_guides/boexir4/en/xi4_dashD_user_en.pdf
Also please check if you can do the same using external interface connection. I believe it is possible.Please refer below thread also.
http://scn.sap.com/thread/2054190
Hope it helps you.
Regards,
Nikhil Joy

SRM 7.0 company code selection for manual PO

Dear All,
We use SRM 7.0 and I have created a purchasing group under a central purchasing organization. This purchasing group is responsible from procurement of two different Company Codes. I did all the assignments in responsibility tab and attributes tab under PPOMA_BBP.
When i try to create a manual PO, I don't see any option to select the company code, either in "Overview" tab , nor in "Header" tab.
Does anybody know or help me how to select/enable company code selection for manual PO creation ?
Thanks in advance,
Best regards,

Dear Kumar,
Thanks for the info. In my organization, there are two company codes and apart from them there is a Purchasing Org.
All the attribute settings are done for these company codes. While creating a PO, as there is no field for Company code, system determines the company code automatically in background. (let's say Company code X). But I'm trying to create a PO for company code Y. When I enter the cost center, I got the error "Cannot purchase between company codes".
So how am i going to select company code Y ? How the system will determine company code Y ? Can you please give in details what must i do ??
Thanks in advance,
Best regards,

Update book inventory with NEW company code assignment for the same site

Hi gurus ,
Our company have this business scenario:
the site has run in Company Code A for several month with business of Material Management function, then the site have to be changed to Company Code B for financial requirement .
What we want is we change the CC assignment by OX18 for site master without changing the site number (creating a new site master ),except for the open purchasing or sales document clearance , is there any way we can update the book inventory with new profit center corresponding to the CC B ?
Thanks in advance ,
Ryan

Actually we have made some discussion with SAP consultant about this requirement ,and they suggest the same thing ,but for many reasons ,we need to make it that way ,and we also made some test for this direct changing by OX18 for new CC assignment .
All other questions are under control now , for financial reason ,we need to update the book inventory to new CC assignment (new profit center after site-specific material master changed ) in some batch session or program ,any idea for this?

Conversion error in company code currency for general costs activity

PS Experts,
Please guide me in the following , The below message appeared when i created a customer project in CJ20N in our new DEV server
This is the scenario
Create customer project with 3 WBSE, each one has 3 NTW and 3 activities, i maintained the cost with currency same as project curr and company code currency in the first two act.
in the third activity (General act) in cost tab i put a currency is different than project currency& company code currency and tried to save the project, the message appears.
note: Company code curr same as projet curr & controlling area curr
Is there any setting is missing in customizing
Conversion error in company code currency for general costs activity 0010
Message no. CK443
Diagnosis
For cost activity 0010, a conversion error occurred in the currency of the company code to which the material is assigned.
Procedure
Check the global settings in Customizing to be sure the exchange rate for conversion into the company code currency is correct
Thanks

Hi Yassin,
I believe you have maintained exchange rates for rate type M as per your config in OPSB.
Now do one thing, maintain the conversion rate for P for those currencies in OB08 and then save your project.
This will solve your problem.
Regards,
Kabir

SRM-Synching company code description between SRM and ECC

Hi,
I have two questions:
1. Is company code descriptions and other details are stored in SRM (like T001 in ECC)?
2. If yes, how can we synch the company code description in SRM and ECC? What is the program name to synch both system
Jit

Sanjeev,
Thanks for the reply. But still there is description difference in SRM - frontend and backend system.
The SRM backend is correct but when we log ninto the SRM portal (frontend), the company code description are missing some characters. Can you pl let me know where is the frontend is picking the Company code description in SRM?
Jit

How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) inpu

HI Experts,
Pls. clarify that, How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) as input?
ThanQ.

Check with USRM1 Table
give user name (Uname ) and you get company code (BUKRS)
also check with other tables : USRM* in SE11
Thanks
Seshu

Using same project for Desktop and Web (?)

Is it possible to manage a same codebase/project for compiling both for AIR and web release (?) Also, on a distant thinking, can ANT able to help on this way?

To elaborate further, in Flash Builder create:
Core Library : Actionscript Library Project - This project contains 90% of your code as CWBenccw mentioned.
AIR Core Library : ActionScript Library Project (Linking AIR libraries) - This project contains AIR-specific implementations of core functionality.
Web App: ActionScript Project (Web) - This project links with Core Library and contains a basic entry point for web (a Main Sprite)
Desktop App: ActionScript Project (Desktop) - This project works like the above, but with a Desktop entry point and Application descriptor, and links with AIR Core Library
Mobile App: ActionScript Mobile Project - Same as above, but for mobile
The way you use your AIR Core Library is to provide overrides for things that are different in AIR. For instance you might want to be able to save files differently, but transparaently to the Core Library. In this case you create an interface for saving in Core Library, e.g.
interface Saver
function save(filename:String, data:String) : void;
You also create an implementation for your non-AIR core:
class FlashSaver implements Saver
function save(filename:String, data:String) : void
     var so : SharedObject = SharedObject.getLocal("something");
     so.data[filename] = data;
     so.flush();
And then an AIR implementation that might use AIR features like direct File IO.
Your various entry points are responsible for providing the correct implementation of Saver to your Core Libraries via some form of dependency injection.

Informix Database for CVP and IPCC reporting, other suggested product

Hi All;
Currently we have in the site Informix Database to be used for CVP and IPCC reporting, but is there other recommended product than it to be more rich in the features and able to use it to generate reports for CVP and IPCC?
From the other side: Any one suggest a front end tool (web based tool) that can be used to generate reports from the Informix DB?
Regards
Bilal

For more complex data needs Cisco has a range of options that using the VIM family of products, particularly the new CUIC/VIM Datamart solution which might be of interest. http://www.exony.com/category/tags/cuic

Migrating Crystal and Webi Reports with Universe from 1 folder to different folders

Hi There
Does anybody know of a way to do the following
this is for BOE XI 3.1 SP 6 FP 6.2 on Windows 2008 R2
We have multiple Crystal and Webi reports developed from 1 universe and we need to copy these Crystal and Webi reports to different folders in the same CMS for example
Universe Dev > Universe Folder Dev - Crystal and Webi Reports set in Dev Folder
Create a copy of the Dev Universe to Universe Folder Test – Copy the Dev Crystal and Webi Reports to Folder Test we need to Map it to the universe in the Test Universe folder(Copy of the Dev Universe)
Create a copy of the Dev Universe to Universe Folder UAT– Copy the Dev Crystal and Webi Reports to Folder UAT we need to Map it to the universe in the UAT Universe folder(Copy of the Dev Universe)
Create a copy of the Dev Universe to Universe Folder PROD – Copy the Dev Crystal and Webi Reports to Folder PROD we need to Map it to the universe in the PROD Universe folder(Copy of the Dev Universe)
The reason for this is each of these universe are connected to a different database i.e Test, UAT, Prod and we have over 200 reports and at the moment we have to manually map each report to the new universe individual which take up hours.
I have tried Lifecycle manager but came to the conclusion it cannot achive this
You cannot change the universe attached to the Crystal and Webi reports
you cannot promote Reports and Universes in the Same CMS to different folders
you cannot change the folder even if you promote jobs between servers
Does anybody know of a way to do this

Hi,
The way you should do this is to have 4 different BO systems, Dev, Test, UAT and Prod.
Having this will allow you to use the same universe across all systems, but the connection to the database will be different on each system.
Not only will this allow you to smoothly report off different data sources, but you will also be able to upgrade and make configuration changes without impacting your production system.
Cheers,
Josh

Company code data for custom replicated from CRM

Hi,
I am trying to default the company code data for a BP replicated from CRM as a customer but it is not working.
How should this be done in CRM 7.0, ECC 6.
I am have so far copied function module SAMPLE_INTERFACE_DE_BALE, added my own code and created the entry in table TBE34. But it doesn't work. Is this correct or is there another method?
regards
Tim

This is what we did wen we had a similar requirement...
u2022     In the ECC create a FM u2018Z_USER_EXIT_BEFORE_SEND_TO_MWu2019.
u2022     Register this function module for the CRM0_200 exit user in the ERP system.
a.     Use Transaction SM30, table TPS34, to go to the maintenance of the modules. Here, enter the Z_USER_EXIT_BEFORE_SEND_TO_MWu2019 module for the CRM0_200 process.
b.     Use Transaction SM30, table TBE24, to check whether the application you have selected (Product column in TPS34) is active.
u2022     The FM will be triggered whenever a Sold gets successfully replicated from CRM to ECC system.
a.     Check for the Object Class u2018BUPAu2019.
b.     Check for the Object Name u2018CUSTOMER_MAINu2019.
c.     If yes copy the BP GUID from the BAPIMTCS Structure.
d.     Now call rfc FM ZLSD_BP_EXTRACT_FRM_GUID in CRM to get the BP number and Acc Group for the respective GUID.
e.     Check if the ACC GRP is Z001.
f.     If yes make a BDC call to transaction FD01 and update the Company Code data u2026. Recon. Account     110000
                             Terms Of Payment ZN30
                           for the respective BP
Note: we have recorded a BDC program to create the company code data.
regards,
Sameer Ahamad

I have product code of CS6 Design and Web Premium. But I cant input that when I install CS6...

I have product code of CS6 Design and Web Premium. But I cant input that when I install CS6...
Because I dont have only number product code. My product code have alphabet....
Can you help me?....Please...

If you transdferred the software from one machine to another that could be the source of the problem. Transferring doesn't work in most cases. You need to install using installation files. You can download via:
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Othert possibly helpful info:
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.htm

Company code restriction for dashboard and webi reports in BOBJ

Similar Messages

Maybe you are looking for